kernel-fxtec-pro1x/drivers/acpi/utilities/utmutex.c
Bob Moore 967440e3be ACPI: ACPICA 20060623
Implemented a new acpi_spinlock type for the OSL lock
interfaces.  This allows the type to be customized to
the host OS for improved efficiency (since a spinlock is
usually a very small object.)

Implemented support for "ignored" bits in the ACPI
registers.  According to the ACPI specification, these
bits should be preserved when writing the registers via
a read/modify/write cycle. There are 3 bits preserved
in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9],
and PM1_STATUS[11].
http://bugzilla.kernel.org/show_bug.cgi?id=3691

Implemented the initial deployment of new OSL mutex
interfaces.  Since some host operating systems have
separate mutex and semaphore objects, this feature was
requested. The base code now uses mutexes (and the new
mutex interfaces) wherever a binary semaphore was used
previously. However, for the current release, the mutex
interfaces are defined as macros to map them to the
existing semaphore interfaces.

Fixed several problems with the support for the control
method SyncLevel parameter. The SyncLevel now works
according to the ACPI specification and in concert with the
Mutex SyncLevel parameter, since the current SyncLevel is
a property of the executing thread. Mutual exclusion for
control methods is now implemented with a mutex instead
of a semaphore.

Fixed three instances of the use of the C shift operator
in the bitfield support code (exfldio.c) to avoid the use
of a shift value larger than the target data width. The
behavior of C compilers is undefined in this case and can
cause unpredictable results, and therefore the case must
be detected and avoided.  (Fiodor Suietov)

Added an info message whenever an SSDT or OEM table
is loaded dynamically via the Load() or LoadTable()
ASL operators. This should improve debugging capability
since it will show exactly what tables have been loaded
(beyond the tables present in the RSDT/XSDT.)

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-28 03:11:38 -04:00

339 lines
9.3 KiB
C

/*******************************************************************************
*
* Module Name: utmutex - local mutex support
*
******************************************************************************/
/*
* Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utmutex")
/* Local prototypes */
static acpi_status acpi_ut_create_mutex(acpi_mutex_handle mutex_id);
static acpi_status acpi_ut_delete_mutex(acpi_mutex_handle mutex_id);
/*******************************************************************************
*
* FUNCTION: acpi_ut_mutex_initialize
*
* PARAMETERS: None.
*
* RETURN: Status
*
* DESCRIPTION: Create the system mutex objects.
*
******************************************************************************/
acpi_status acpi_ut_mutex_initialize(void)
{
u32 i;
acpi_status status;
ACPI_FUNCTION_TRACE(ut_mutex_initialize);
/*
* Create each of the predefined mutex objects
*/
for (i = 0; i < ACPI_NUM_MUTEX; i++) {
status = acpi_ut_create_mutex(i);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
/* Create the spinlocks for use at interrupt level */
spin_lock_init(acpi_gbl_gpe_lock);
spin_lock_init(acpi_gbl_hardware_lock);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_mutex_terminate
*
* PARAMETERS: None.
*
* RETURN: None.
*
* DESCRIPTION: Delete all of the system mutex objects.
*
******************************************************************************/
void acpi_ut_mutex_terminate(void)
{
u32 i;
ACPI_FUNCTION_TRACE(ut_mutex_terminate);
/*
* Delete each predefined mutex object
*/
for (i = 0; i < ACPI_NUM_MUTEX; i++) {
(void)acpi_ut_delete_mutex(i);
}
/* Delete the spinlocks */
acpi_os_delete_lock(acpi_gbl_gpe_lock);
acpi_os_delete_lock(acpi_gbl_hardware_lock);
return_VOID;
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_create_mutex
*
* PARAMETERS: mutex_iD - ID of the mutex to be created
*
* RETURN: Status
*
* DESCRIPTION: Create a mutex object.
*
******************************************************************************/
static acpi_status acpi_ut_create_mutex(acpi_mutex_handle mutex_id)
{
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE_U32(ut_create_mutex, mutex_id);
if (mutex_id > ACPI_MAX_MUTEX) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
if (!acpi_gbl_mutex_info[mutex_id].mutex) {
status =
acpi_os_create_mutex(&acpi_gbl_mutex_info[mutex_id].mutex);
acpi_gbl_mutex_info[mutex_id].thread_id =
ACPI_MUTEX_NOT_ACQUIRED;
acpi_gbl_mutex_info[mutex_id].use_count = 0;
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_delete_mutex
*
* PARAMETERS: mutex_iD - ID of the mutex to be deleted
*
* RETURN: Status
*
* DESCRIPTION: Delete a mutex object.
*
******************************************************************************/
static acpi_status acpi_ut_delete_mutex(acpi_mutex_handle mutex_id)
{
ACPI_FUNCTION_TRACE_U32(ut_delete_mutex, mutex_id);
if (mutex_id > ACPI_MAX_MUTEX) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
acpi_os_delete_mutex(acpi_gbl_mutex_info[mutex_id].mutex);
acpi_gbl_mutex_info[mutex_id].mutex = NULL;
acpi_gbl_mutex_info[mutex_id].thread_id = ACPI_MUTEX_NOT_ACQUIRED;
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_acquire_mutex
*
* PARAMETERS: mutex_iD - ID of the mutex to be acquired
*
* RETURN: Status
*
* DESCRIPTION: Acquire a mutex object.
*
******************************************************************************/
acpi_status acpi_ut_acquire_mutex(acpi_mutex_handle mutex_id)
{
acpi_status status;
acpi_thread_id this_thread_id;
ACPI_FUNCTION_NAME(ut_acquire_mutex);
if (mutex_id > ACPI_MAX_MUTEX) {
return (AE_BAD_PARAMETER);
}
this_thread_id = acpi_os_get_thread_id();
#ifdef ACPI_MUTEX_DEBUG
{
u32 i;
/*
* Mutex debug code, for internal debugging only.
*
* Deadlock prevention. Check if this thread owns any mutexes of value
* greater than or equal to this one. If so, the thread has violated
* the mutex ordering rule. This indicates a coding error somewhere in
* the ACPI subsystem code.
*/
for (i = mutex_id; i < ACPI_MAX_MUTEX; i++) {
if (acpi_gbl_mutex_info[i].thread_id == this_thread_id) {
if (i == mutex_id) {
ACPI_ERROR((AE_INFO,
"Mutex [%s] already acquired by this thread [%X]",
acpi_ut_get_mutex_name
(mutex_id),
this_thread_id));
return (AE_ALREADY_ACQUIRED);
}
ACPI_ERROR((AE_INFO,
"Invalid acquire order: Thread %X owns [%s], wants [%s]",
this_thread_id,
acpi_ut_get_mutex_name(i),
acpi_ut_get_mutex_name(mutex_id)));
return (AE_ACQUIRE_DEADLOCK);
}
}
}
#endif
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
"Thread %X attempting to acquire Mutex [%s]\n",
this_thread_id, acpi_ut_get_mutex_name(mutex_id)));
status = acpi_os_acquire_mutex(acpi_gbl_mutex_info[mutex_id].mutex,
ACPI_WAIT_FOREVER);
if (ACPI_SUCCESS(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
"Thread %X acquired Mutex [%s]\n",
this_thread_id,
acpi_ut_get_mutex_name(mutex_id)));
acpi_gbl_mutex_info[mutex_id].use_count++;
acpi_gbl_mutex_info[mutex_id].thread_id = this_thread_id;
} else {
ACPI_EXCEPTION((AE_INFO, status,
"Thread %X could not acquire Mutex [%X]",
this_thread_id, mutex_id));
}
return (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_release_mutex
*
* PARAMETERS: mutex_iD - ID of the mutex to be released
*
* RETURN: Status
*
* DESCRIPTION: Release a mutex object.
*
******************************************************************************/
acpi_status acpi_ut_release_mutex(acpi_mutex_handle mutex_id)
{
acpi_thread_id this_thread_id;
ACPI_FUNCTION_NAME(ut_release_mutex);
this_thread_id = acpi_os_get_thread_id();
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
"Thread %X releasing Mutex [%s]\n", this_thread_id,
acpi_ut_get_mutex_name(mutex_id)));
if (mutex_id > ACPI_MAX_MUTEX) {
return (AE_BAD_PARAMETER);
}
/*
* Mutex must be acquired in order to release it!
*/
if (acpi_gbl_mutex_info[mutex_id].thread_id == ACPI_MUTEX_NOT_ACQUIRED) {
ACPI_ERROR((AE_INFO,
"Mutex [%X] is not acquired, cannot release",
mutex_id));
return (AE_NOT_ACQUIRED);
}
#ifdef ACPI_MUTEX_DEBUG
{
u32 i;
/*
* Mutex debug code, for internal debugging only.
*
* Deadlock prevention. Check if this thread owns any mutexes of value
* greater than this one. If so, the thread has violated the mutex
* ordering rule. This indicates a coding error somewhere in
* the ACPI subsystem code.
*/
for (i = mutex_id; i < ACPI_MAX_MUTEX; i++) {
if (acpi_gbl_mutex_info[i].thread_id == this_thread_id) {
if (i == mutex_id) {
continue;
}
ACPI_ERROR((AE_INFO,
"Invalid release order: owns [%s], releasing [%s]",
acpi_ut_get_mutex_name(i),
acpi_ut_get_mutex_name(mutex_id)));
return (AE_RELEASE_DEADLOCK);
}
}
}
#endif
/* Mark unlocked FIRST */
acpi_gbl_mutex_info[mutex_id].thread_id = ACPI_MUTEX_NOT_ACQUIRED;
acpi_os_release_mutex(acpi_gbl_mutex_info[mutex_id].mutex);
return (AE_OK);
}