bf4289cba0
So we can now choose for the board the ecc mode (ecc soft, soft bch, no ecc and hardware). Set ecc mode in the boards to soft as currently in the driver. Move platform data to a common header include/linux/platform_data/atmel_nand.h Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: David Woodhouse <dwmw2@infradead.org>
600 lines
19 KiB
C
600 lines
19 KiB
C
/*
|
|
* linux/arch/arm/mach-at91/board-yl-9200.c
|
|
*
|
|
* Adapted from various board files in arch/arm/mach-at91
|
|
*
|
|
* Modifications for YL-9200 platform:
|
|
* Copyright (C) 2007 S. Birtles
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/init.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/ads7846.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/input.h>
|
|
|
|
#include <asm/setup.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/irq.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/board.h>
|
|
#include <mach/at91rm9200_mc.h>
|
|
#include <mach/at91_ramc.h>
|
|
#include <mach/cpu.h>
|
|
|
|
#include "generic.h"
|
|
|
|
|
|
static void __init yl9200_init_early(void)
|
|
{
|
|
/* Set cpu type: PQFP */
|
|
at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
|
|
|
|
/* Initialize processor: 18.432 MHz crystal */
|
|
at91_initialize(18432000);
|
|
|
|
/* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
|
|
at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
|
|
|
|
/* DBGU on ttyS0. (Rx & Tx only) */
|
|
at91_register_uart(0, 0, 0);
|
|
|
|
/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
|
|
at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
|
|
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
|
|
| ATMEL_UART_RI);
|
|
|
|
/* USART0 on ttyS2. (Rx & Tx only to JP3) */
|
|
at91_register_uart(AT91RM9200_ID_US0, 2, 0);
|
|
|
|
/* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
|
|
at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
|
|
|
|
/* set serial console to ttyS0 (ie, DBGU) */
|
|
at91_set_serial_console(0);
|
|
}
|
|
|
|
/*
|
|
* LEDs
|
|
*/
|
|
static struct gpio_led yl9200_leds[] = {
|
|
{ /* D2 */
|
|
.name = "led2",
|
|
.gpio = AT91_PIN_PB17,
|
|
.active_low = 1,
|
|
.default_trigger = "timer",
|
|
},
|
|
{ /* D3 */
|
|
.name = "led3",
|
|
.gpio = AT91_PIN_PB16,
|
|
.active_low = 1,
|
|
.default_trigger = "heartbeat",
|
|
},
|
|
{ /* D4 */
|
|
.name = "led4",
|
|
.gpio = AT91_PIN_PB15,
|
|
.active_low = 1,
|
|
},
|
|
{ /* D5 */
|
|
.name = "led5",
|
|
.gpio = AT91_PIN_PB8,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
/*
|
|
* Ethernet
|
|
*/
|
|
static struct macb_platform_data __initdata yl9200_eth_data = {
|
|
.phy_irq_pin = AT91_PIN_PB28,
|
|
.is_rmii = 1,
|
|
};
|
|
|
|
/*
|
|
* USB Host
|
|
*/
|
|
static struct at91_usbh_data __initdata yl9200_usbh_data = {
|
|
.ports = 1, /* PQFP version of AT91RM9200 */
|
|
.vbus_pin = {-EINVAL, -EINVAL},
|
|
.overcurrent_pin= {-EINVAL, -EINVAL},
|
|
};
|
|
|
|
/*
|
|
* USB Device
|
|
*/
|
|
static struct at91_udc_data __initdata yl9200_udc_data = {
|
|
.pullup_pin = AT91_PIN_PC4,
|
|
.vbus_pin = AT91_PIN_PC5,
|
|
.pullup_active_low = 1, /* Active Low due to PNP transistor (pg 7) */
|
|
|
|
};
|
|
|
|
/*
|
|
* MMC
|
|
*/
|
|
static struct at91_mmc_data __initdata yl9200_mmc_data = {
|
|
.det_pin = AT91_PIN_PB9,
|
|
.wire4 = 1,
|
|
.wp_pin = -EINVAL,
|
|
.vcc_pin = -EINVAL,
|
|
};
|
|
|
|
/*
|
|
* NAND Flash
|
|
*/
|
|
static struct mtd_partition __initdata yl9200_nand_partition[] = {
|
|
{
|
|
.name = "AT91 NAND partition 1, boot",
|
|
.offset = 0,
|
|
.size = SZ_256K
|
|
},
|
|
{
|
|
.name = "AT91 NAND partition 2, kernel",
|
|
.offset = MTDPART_OFS_NXTBLK,
|
|
.size = (2 * SZ_1M) - SZ_256K
|
|
},
|
|
{
|
|
.name = "AT91 NAND partition 3, filesystem",
|
|
.offset = MTDPART_OFS_NXTBLK,
|
|
.size = 14 * SZ_1M
|
|
},
|
|
{
|
|
.name = "AT91 NAND partition 4, storage",
|
|
.offset = MTDPART_OFS_NXTBLK,
|
|
.size = SZ_16M
|
|
},
|
|
{
|
|
.name = "AT91 NAND partition 5, ext-fs",
|
|
.offset = MTDPART_OFS_NXTBLK,
|
|
.size = SZ_32M
|
|
}
|
|
};
|
|
|
|
static struct atmel_nand_data __initdata yl9200_nand_data = {
|
|
.ale = 6,
|
|
.cle = 7,
|
|
.det_pin = -EINVAL,
|
|
.rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */
|
|
.enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */
|
|
.ecc_mode = NAND_ECC_SOFT,
|
|
.parts = yl9200_nand_partition,
|
|
.num_parts = ARRAY_SIZE(yl9200_nand_partition),
|
|
};
|
|
|
|
/*
|
|
* NOR Flash
|
|
*/
|
|
#define YL9200_FLASH_BASE AT91_CHIPSELECT_0
|
|
#define YL9200_FLASH_SIZE SZ_16M
|
|
|
|
static struct mtd_partition yl9200_flash_partitions[] = {
|
|
{
|
|
.name = "Bootloader",
|
|
.offset = 0,
|
|
.size = SZ_256K,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
{
|
|
.name = "Kernel",
|
|
.offset = MTDPART_OFS_NXTBLK,
|
|
.size = (2 * SZ_1M) - SZ_256K
|
|
},
|
|
{
|
|
.name = "Filesystem",
|
|
.offset = MTDPART_OFS_NXTBLK,
|
|
.size = MTDPART_SIZ_FULL
|
|
}
|
|
};
|
|
|
|
static struct physmap_flash_data yl9200_flash_data = {
|
|
.width = 2,
|
|
.parts = yl9200_flash_partitions,
|
|
.nr_parts = ARRAY_SIZE(yl9200_flash_partitions),
|
|
};
|
|
|
|
static struct resource yl9200_flash_resources[] = {
|
|
{
|
|
.start = YL9200_FLASH_BASE,
|
|
.end = YL9200_FLASH_BASE + YL9200_FLASH_SIZE - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct platform_device yl9200_flash = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &yl9200_flash_data,
|
|
},
|
|
.resource = yl9200_flash_resources,
|
|
.num_resources = ARRAY_SIZE(yl9200_flash_resources),
|
|
};
|
|
|
|
/*
|
|
* I2C (TWI)
|
|
*/
|
|
static struct i2c_board_info __initdata yl9200_i2c_devices[] = {
|
|
{ /* EEPROM */
|
|
I2C_BOARD_INFO("24c128", 0x50),
|
|
}
|
|
};
|
|
|
|
/*
|
|
* GPIO Buttons
|
|
*/
|
|
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
|
|
static struct gpio_keys_button yl9200_buttons[] = {
|
|
{
|
|
.gpio = AT91_PIN_PA24,
|
|
.code = BTN_2,
|
|
.desc = "SW2",
|
|
.active_low = 1,
|
|
.wakeup = 1,
|
|
},
|
|
{
|
|
.gpio = AT91_PIN_PB1,
|
|
.code = BTN_3,
|
|
.desc = "SW3",
|
|
.active_low = 1,
|
|
.wakeup = 1,
|
|
},
|
|
{
|
|
.gpio = AT91_PIN_PB2,
|
|
.code = BTN_4,
|
|
.desc = "SW4",
|
|
.active_low = 1,
|
|
.wakeup = 1,
|
|
},
|
|
{
|
|
.gpio = AT91_PIN_PB6,
|
|
.code = BTN_5,
|
|
.desc = "SW5",
|
|
.active_low = 1,
|
|
.wakeup = 1,
|
|
}
|
|
};
|
|
|
|
static struct gpio_keys_platform_data yl9200_button_data = {
|
|
.buttons = yl9200_buttons,
|
|
.nbuttons = ARRAY_SIZE(yl9200_buttons),
|
|
};
|
|
|
|
static struct platform_device yl9200_button_device = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.num_resources = 0,
|
|
.dev = {
|
|
.platform_data = &yl9200_button_data,
|
|
}
|
|
};
|
|
|
|
static void __init yl9200_add_device_buttons(void)
|
|
{
|
|
at91_set_gpio_input(AT91_PIN_PA24, 1); /* SW2 */
|
|
at91_set_deglitch(AT91_PIN_PA24, 1);
|
|
at91_set_gpio_input(AT91_PIN_PB1, 1); /* SW3 */
|
|
at91_set_deglitch(AT91_PIN_PB1, 1);
|
|
at91_set_gpio_input(AT91_PIN_PB2, 1); /* SW4 */
|
|
at91_set_deglitch(AT91_PIN_PB2, 1);
|
|
at91_set_gpio_input(AT91_PIN_PB6, 1); /* SW5 */
|
|
at91_set_deglitch(AT91_PIN_PB6, 1);
|
|
|
|
/* Enable buttons (Sheet 5) */
|
|
at91_set_gpio_output(AT91_PIN_PB7, 1);
|
|
|
|
platform_device_register(&yl9200_button_device);
|
|
}
|
|
#else
|
|
static void __init yl9200_add_device_buttons(void) {}
|
|
#endif
|
|
|
|
/*
|
|
* Touchscreen
|
|
*/
|
|
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
|
|
static int ads7843_pendown_state(void)
|
|
{
|
|
return !at91_get_gpio_value(AT91_PIN_PB11); /* Touchscreen PENIRQ */
|
|
}
|
|
|
|
static struct ads7846_platform_data ads_info = {
|
|
.model = 7843,
|
|
.x_min = 150,
|
|
.x_max = 3830,
|
|
.y_min = 190,
|
|
.y_max = 3830,
|
|
.vref_delay_usecs = 100,
|
|
|
|
/* For a 8" touch-screen */
|
|
// .x_plate_ohms = 603,
|
|
// .y_plate_ohms = 332,
|
|
|
|
/* For a 10.4" touch-screen */
|
|
// .x_plate_ohms = 611,
|
|
// .y_plate_ohms = 325,
|
|
|
|
.x_plate_ohms = 576,
|
|
.y_plate_ohms = 366,
|
|
|
|
.pressure_max = 15000, /* generally nonsense on the 7843 */
|
|
.debounce_max = 1,
|
|
.debounce_rep = 0,
|
|
.debounce_tol = (~0),
|
|
.get_pendown_state = ads7843_pendown_state,
|
|
};
|
|
|
|
static void __init yl9200_add_device_ts(void)
|
|
{
|
|
at91_set_gpio_input(AT91_PIN_PB11, 1); /* Touchscreen interrupt pin */
|
|
at91_set_gpio_input(AT91_PIN_PB10, 1); /* Touchscreen BUSY signal - not used! */
|
|
}
|
|
#else
|
|
static void __init yl9200_add_device_ts(void) {}
|
|
#endif
|
|
|
|
/*
|
|
* SPI devices
|
|
*/
|
|
static struct spi_board_info yl9200_spi_devices[] = {
|
|
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
|
|
{ /* Touchscreen */
|
|
.modalias = "ads7846",
|
|
.chip_select = 0,
|
|
.max_speed_hz = 5000 * 26,
|
|
.platform_data = &ads_info,
|
|
.irq = AT91_PIN_PB11,
|
|
},
|
|
#endif
|
|
{ /* CAN */
|
|
.modalias = "mcp2510",
|
|
.chip_select = 1,
|
|
.max_speed_hz = 25000 * 26,
|
|
.irq = AT91_PIN_PC0,
|
|
}
|
|
};
|
|
|
|
/*
|
|
* LCD / VGA
|
|
*
|
|
* EPSON S1D13806 FB (discontinued chip)
|
|
* EPSON S1D13506 FB
|
|
*/
|
|
#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
|
|
#include <video/s1d13xxxfb.h>
|
|
|
|
|
|
static void yl9200_init_video(void)
|
|
{
|
|
/* NWAIT Signal */
|
|
at91_set_A_periph(AT91_PIN_PC6, 0);
|
|
|
|
/* Initialization of the Static Memory Controller for Chip Select 2 */
|
|
at91_ramc_write(0, AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */
|
|
| AT91_SMC_WSEN | AT91_SMC_NWS_(0x4) /* wait states */
|
|
| AT91_SMC_TDF_(0x100) /* float time */
|
|
);
|
|
}
|
|
|
|
static struct s1d13xxxfb_regval yl9200_s1dfb_initregs[] =
|
|
{
|
|
{S1DREG_MISC, 0x00}, /* Miscellaneous Register*/
|
|
{S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/
|
|
{S1DREG_GPIO_CNF0, 0x00}, /* General IO Pins Configuration Register*/
|
|
{S1DREG_GPIO_CTL0, 0x00}, /* General IO Pins Control Register*/
|
|
{S1DREG_CLK_CNF, 0x11}, /* Memory Clock Configuration Register*/
|
|
{S1DREG_LCD_CLK_CNF, 0x10}, /* LCD Pixel Clock Configuration Register*/
|
|
{S1DREG_CRT_CLK_CNF, 0x12}, /* CRT/TV Pixel Clock Configuration Register*/
|
|
{S1DREG_MPLUG_CLK_CNF, 0x01}, /* MediaPlug Clock Configuration Register*/
|
|
{S1DREG_CPU2MEM_WST_SEL, 0x02}, /* CPU To Memory Wait State Select Register*/
|
|
{S1DREG_MEM_CNF, 0x00}, /* Memory Configuration Register*/
|
|
{S1DREG_SDRAM_REF_RATE, 0x04}, /* DRAM Refresh Rate Register, MCLK source*/
|
|
{S1DREG_SDRAM_TC0, 0x12}, /* DRAM Timings Control Register 0*/
|
|
{S1DREG_SDRAM_TC1, 0x02}, /* DRAM Timings Control Register 1*/
|
|
{S1DREG_PANEL_TYPE, 0x25}, /* Panel Type Register*/
|
|
{S1DREG_MOD_RATE, 0x00}, /* MOD Rate Register*/
|
|
{S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* LCD Horizontal Display Width Register*/
|
|
{S1DREG_LCD_NDISP_HPER, 0x13}, /* LCD Horizontal Non-Display Period Register*/
|
|
{S1DREG_TFT_FPLINE_START, 0x01}, /* TFT FPLINE Start Position Register*/
|
|
{S1DREG_TFT_FPLINE_PWIDTH, 0x0c}, /* TFT FPLINE Pulse Width Register*/
|
|
{S1DREG_LCD_DISP_VHEIGHT0, 0xDF}, /* LCD Vertical Display Height Register 0*/
|
|
{S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* LCD Vertical Display Height Register 1*/
|
|
{S1DREG_LCD_NDISP_VPER, 0x2c}, /* LCD Vertical Non-Display Period Register*/
|
|
{S1DREG_TFT_FPFRAME_START, 0x0a}, /* TFT FPFRAME Start Position Register*/
|
|
{S1DREG_TFT_FPFRAME_PWIDTH, 0x02}, /* TFT FPFRAME Pulse Width Register*/
|
|
{S1DREG_LCD_DISP_MODE, 0x05}, /* LCD Display Mode Register*/
|
|
{S1DREG_LCD_MISC, 0x01}, /* LCD Miscellaneous Register*/
|
|
{S1DREG_LCD_DISP_START0, 0x00}, /* LCD Display Start Address Register 0*/
|
|
{S1DREG_LCD_DISP_START1, 0x00}, /* LCD Display Start Address Register 1*/
|
|
{S1DREG_LCD_DISP_START2, 0x00}, /* LCD Display Start Address Register 2*/
|
|
{S1DREG_LCD_MEM_OFF0, 0x80}, /* LCD Memory Address Offset Register 0*/
|
|
{S1DREG_LCD_MEM_OFF1, 0x02}, /* LCD Memory Address Offset Register 1*/
|
|
{S1DREG_LCD_PIX_PAN, 0x03}, /* LCD Pixel Panning Register*/
|
|
{S1DREG_LCD_DISP_FIFO_HTC, 0x00}, /* LCD Display FIFO High Threshold Control Register*/
|
|
{S1DREG_LCD_DISP_FIFO_LTC, 0x00}, /* LCD Display FIFO Low Threshold Control Register*/
|
|
{S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* CRT/TV Horizontal Display Width Register*/
|
|
{S1DREG_CRT_NDISP_HPER, 0x13}, /* CRT/TV Horizontal Non-Display Period Register*/
|
|
{S1DREG_CRT_HRTC_START, 0x01}, /* CRT/TV HRTC Start Position Register*/
|
|
{S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* CRT/TV HRTC Pulse Width Register*/
|
|
{S1DREG_CRT_DISP_VHEIGHT0, 0xDF}, /* CRT/TV Vertical Display Height Register 0*/
|
|
{S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* CRT/TV Vertical Display Height Register 1*/
|
|
{S1DREG_CRT_NDISP_VPER, 0x2B}, /* CRT/TV Vertical Non-Display Period Register*/
|
|
{S1DREG_CRT_VRTC_START, 0x09}, /* CRT/TV VRTC Start Position Register*/
|
|
{S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* CRT/TV VRTC Pulse Width Register*/
|
|
{S1DREG_TV_OUT_CTL, 0x18}, /* TV Output Control Register */
|
|
{S1DREG_CRT_DISP_MODE, 0x05}, /* CRT/TV Display Mode Register, 16BPP*/
|
|
{S1DREG_CRT_DISP_START0, 0x00}, /* CRT/TV Display Start Address Register 0*/
|
|
{S1DREG_CRT_DISP_START1, 0x00}, /* CRT/TV Display Start Address Register 1*/
|
|
{S1DREG_CRT_DISP_START2, 0x00}, /* CRT/TV Display Start Address Register 2*/
|
|
{S1DREG_CRT_MEM_OFF0, 0x80}, /* CRT/TV Memory Address Offset Register 0*/
|
|
{S1DREG_CRT_MEM_OFF1, 0x02}, /* CRT/TV Memory Address Offset Register 1*/
|
|
{S1DREG_CRT_PIX_PAN, 0x00}, /* CRT/TV Pixel Panning Register*/
|
|
{S1DREG_CRT_DISP_FIFO_HTC, 0x00}, /* CRT/TV Display FIFO High Threshold Control Register*/
|
|
{S1DREG_CRT_DISP_FIFO_LTC, 0x00}, /* CRT/TV Display FIFO Low Threshold Control Register*/
|
|
{S1DREG_LCD_CUR_CTL, 0x00}, /* LCD Ink/Cursor Control Register*/
|
|
{S1DREG_LCD_CUR_START, 0x01}, /* LCD Ink/Cursor Start Address Register*/
|
|
{S1DREG_LCD_CUR_XPOS0, 0x00}, /* LCD Cursor X Position Register 0*/
|
|
{S1DREG_LCD_CUR_XPOS1, 0x00}, /* LCD Cursor X Position Register 1*/
|
|
{S1DREG_LCD_CUR_YPOS0, 0x00}, /* LCD Cursor Y Position Register 0*/
|
|
{S1DREG_LCD_CUR_YPOS1, 0x00}, /* LCD Cursor Y Position Register 1*/
|
|
{S1DREG_LCD_CUR_BCTL0, 0x00}, /* LCD Ink/Cursor Blue Color 0 Register*/
|
|
{S1DREG_LCD_CUR_GCTL0, 0x00}, /* LCD Ink/Cursor Green Color 0 Register*/
|
|
{S1DREG_LCD_CUR_RCTL0, 0x00}, /* LCD Ink/Cursor Red Color 0 Register*/
|
|
{S1DREG_LCD_CUR_BCTL1, 0x1F}, /* LCD Ink/Cursor Blue Color 1 Register*/
|
|
{S1DREG_LCD_CUR_GCTL1, 0x3F}, /* LCD Ink/Cursor Green Color 1 Register*/
|
|
{S1DREG_LCD_CUR_RCTL1, 0x1F}, /* LCD Ink/Cursor Red Color 1 Register*/
|
|
{S1DREG_LCD_CUR_FIFO_HTC, 0x00}, /* LCD Ink/Cursor FIFO Threshold Register*/
|
|
{S1DREG_CRT_CUR_CTL, 0x00}, /* CRT/TV Ink/Cursor Control Register*/
|
|
{S1DREG_CRT_CUR_START, 0x01}, /* CRT/TV Ink/Cursor Start Address Register*/
|
|
{S1DREG_CRT_CUR_XPOS0, 0x00}, /* CRT/TV Cursor X Position Register 0*/
|
|
{S1DREG_CRT_CUR_XPOS1, 0x00}, /* CRT/TV Cursor X Position Register 1*/
|
|
{S1DREG_CRT_CUR_YPOS0, 0x00}, /* CRT/TV Cursor Y Position Register 0*/
|
|
{S1DREG_CRT_CUR_YPOS1, 0x00}, /* CRT/TV Cursor Y Position Register 1*/
|
|
{S1DREG_CRT_CUR_BCTL0, 0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register*/
|
|
{S1DREG_CRT_CUR_GCTL0, 0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register*/
|
|
{S1DREG_CRT_CUR_RCTL0, 0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register*/
|
|
{S1DREG_CRT_CUR_BCTL1, 0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register*/
|
|
{S1DREG_CRT_CUR_GCTL1, 0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register*/
|
|
{S1DREG_CRT_CUR_RCTL1, 0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register*/
|
|
{S1DREG_CRT_CUR_FIFO_HTC, 0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register*/
|
|
{S1DREG_BBLT_CTL0, 0x00}, /* BitBlt Control Register 0*/
|
|
{S1DREG_BBLT_CTL1, 0x01}, /* BitBlt Control Register 1*/
|
|
{S1DREG_BBLT_CC_EXP, 0x00}, /* BitBlt ROP Code/Color Expansion Register*/
|
|
{S1DREG_BBLT_OP, 0x00}, /* BitBlt Operation Register*/
|
|
{S1DREG_BBLT_SRC_START0, 0x00}, /* BitBlt Source Start Address Register 0*/
|
|
{S1DREG_BBLT_SRC_START1, 0x00}, /* BitBlt Source Start Address Register 1*/
|
|
{S1DREG_BBLT_SRC_START2, 0x00}, /* BitBlt Source Start Address Register 2*/
|
|
{S1DREG_BBLT_DST_START0, 0x00}, /* BitBlt Destination Start Address Register 0*/
|
|
{S1DREG_BBLT_DST_START1, 0x00}, /* BitBlt Destination Start Address Register 1*/
|
|
{S1DREG_BBLT_DST_START2, 0x00}, /* BitBlt Destination Start Address Register 2*/
|
|
{S1DREG_BBLT_MEM_OFF0, 0x00}, /* BitBlt Memory Address Offset Register 0*/
|
|
{S1DREG_BBLT_MEM_OFF1, 0x00}, /* BitBlt Memory Address Offset Register 1*/
|
|
{S1DREG_BBLT_WIDTH0, 0x00}, /* BitBlt Width Register 0*/
|
|
{S1DREG_BBLT_WIDTH1, 0x00}, /* BitBlt Width Register 1*/
|
|
{S1DREG_BBLT_HEIGHT0, 0x00}, /* BitBlt Height Register 0*/
|
|
{S1DREG_BBLT_HEIGHT1, 0x00}, /* BitBlt Height Register 1*/
|
|
{S1DREG_BBLT_BGC0, 0x00}, /* BitBlt Background Color Register 0*/
|
|
{S1DREG_BBLT_BGC1, 0x00}, /* BitBlt Background Color Register 1*/
|
|
{S1DREG_BBLT_FGC0, 0x00}, /* BitBlt Foreground Color Register 0*/
|
|
{S1DREG_BBLT_FGC1, 0x00}, /* BitBlt Foreground Color Register 1*/
|
|
{S1DREG_LKUP_MODE, 0x00}, /* Look-Up Table Mode Register*/
|
|
{S1DREG_LKUP_ADDR, 0x00}, /* Look-Up Table Address Register*/
|
|
{S1DREG_PS_CNF, 0x00}, /* Power Save Configuration Register*/
|
|
{S1DREG_PS_STATUS, 0x00}, /* Power Save Status Register*/
|
|
{S1DREG_CPU2MEM_WDOGT, 0x00}, /* CPU-to-Memory Access Watchdog Timer Register*/
|
|
{S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/
|
|
};
|
|
|
|
static struct s1d13xxxfb_pdata yl9200_s1dfb_pdata = {
|
|
.initregs = yl9200_s1dfb_initregs,
|
|
.initregssize = ARRAY_SIZE(yl9200_s1dfb_initregs),
|
|
.platform_init_video = yl9200_init_video,
|
|
};
|
|
|
|
#define YL9200_FB_REG_BASE AT91_CHIPSELECT_7
|
|
#define YL9200_FB_VMEM_BASE YL9200_FB_REG_BASE + SZ_2M
|
|
#define YL9200_FB_VMEM_SIZE SZ_2M
|
|
|
|
static struct resource yl9200_s1dfb_resource[] = {
|
|
[0] = { /* video mem */
|
|
.name = "s1d13xxxfb memory",
|
|
.start = YL9200_FB_VMEM_BASE,
|
|
.end = YL9200_FB_VMEM_BASE + YL9200_FB_VMEM_SIZE -1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = { /* video registers */
|
|
.name = "s1d13xxxfb registers",
|
|
.start = YL9200_FB_REG_BASE,
|
|
.end = YL9200_FB_REG_BASE + SZ_512 -1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device yl9200_s1dfb_device = {
|
|
.name = "s1d13806fb",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &s1dfb_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &yl9200_s1dfb_pdata,
|
|
},
|
|
.resource = yl9200_s1dfb_resource,
|
|
.num_resources = ARRAY_SIZE(yl9200_s1dfb_resource),
|
|
};
|
|
|
|
void __init yl9200_add_device_video(void)
|
|
{
|
|
platform_device_register(&yl9200_s1dfb_device);
|
|
}
|
|
#else
|
|
void __init yl9200_add_device_video(void) {}
|
|
#endif
|
|
|
|
|
|
static void __init yl9200_board_init(void)
|
|
{
|
|
/* Serial */
|
|
at91_add_device_serial();
|
|
/* Ethernet */
|
|
at91_add_device_eth(&yl9200_eth_data);
|
|
/* USB Host */
|
|
at91_add_device_usbh(&yl9200_usbh_data);
|
|
/* USB Device */
|
|
at91_add_device_udc(&yl9200_udc_data);
|
|
/* I2C */
|
|
at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
|
|
/* MMC */
|
|
at91_add_device_mmc(0, &yl9200_mmc_data);
|
|
/* NAND */
|
|
at91_add_device_nand(&yl9200_nand_data);
|
|
/* NOR Flash */
|
|
platform_device_register(&yl9200_flash);
|
|
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
|
|
/* SPI */
|
|
at91_add_device_spi(yl9200_spi_devices, ARRAY_SIZE(yl9200_spi_devices));
|
|
/* Touchscreen */
|
|
yl9200_add_device_ts();
|
|
#endif
|
|
/* LEDs. */
|
|
at91_gpio_leds(yl9200_leds, ARRAY_SIZE(yl9200_leds));
|
|
/* Push Buttons */
|
|
yl9200_add_device_buttons();
|
|
/* VGA */
|
|
yl9200_add_device_video();
|
|
}
|
|
|
|
MACHINE_START(YL9200, "uCdragon YL-9200")
|
|
/* Maintainer: S.Birtles */
|
|
.timer = &at91rm9200_timer,
|
|
.map_io = at91_map_io,
|
|
.init_early = yl9200_init_early,
|
|
.init_irq = at91_init_irq_default,
|
|
.init_machine = yl9200_board_init,
|
|
MACHINE_END
|