kernel-fxtec-pro1x/sound/soc/blackfin/bf5xx-ac97.c
Liam Girdwood f0fba2ad1b ASoC: multi-component - ASoC Multi-Component Support
This patch extends the ASoC API to allow sound cards to have more than one
CODEC and more than one platform DMA controller. This is achieved by dividing
some current ASoC structures that contain both driver data and device data into
structures that only either contain device data or driver data. i.e.

 struct snd_soc_codec    --->  struct snd_soc_codec (device data)
                          +->  struct snd_soc_codec_driver (driver data)

 struct snd_soc_platform --->  struct snd_soc_platform (device data)
                          +->  struct snd_soc_platform_driver (driver data)

 struct snd_soc_dai      --->  struct snd_soc_dai (device data)
                          +->  struct snd_soc_dai_driver (driver data)

 struct snd_soc_device   --->  deleted

This now allows ASoC to be more tightly aligned with the Linux driver model and
also means that every ASoC codec, platform and (platform) DAI is a kernel
device. ASoC component private data is now stored as device private data.

The ASoC sound card struct snd_soc_card has also been updated to store lists
of it's components rather than a pointer to a codec and platform. The PCM
runtime struct soc_pcm_runtime now has pointers to all its components.

This patch adds DAPM support for ASoC multi-component and removes struct
snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec
or runtime PCM level basis rather than using snd_soc_socdev.

Other notable multi-component changes:-

 * Stream operations now de-reference less structures.
 * close_delayed work() now runs on a DAI basis rather than looping all DAIs
   in a card.
 * PM suspend()/resume() operations can now handle N CODECs and Platforms
   per sound card.
 * Added soc_bind_dai_link() to bind the component devices to the sound card.
 * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove
   DAI link components.
 * sysfs entries can now be registered per component per card.
 * snd_soc_new_pcms() functionailty rolled into dai_link_probe().
 * snd_soc_register_codec() now does all the codec list and mutex init.

This patch changes the probe() and remove() of the CODEC drivers as follows:-

 o Make CODEC driver a platform driver
 o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core.
 o Removed all static codec pointers (drivers now support > 1 codec dev)
 o snd_soc_register_pcms() now done by core.
 o snd_soc_register_dai() folded into snd_soc_register_codec().

CS4270 portions:
Acked-by: Timur Tabi <timur@freescale.com>

Some TLV320aic23 and Cirrus platform fixes.
Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>

TI CODEC and OMAP fixes
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>

Samsung platform and misc fixes :-
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>

MPC8610 and PPC fixes.
Signed-off-by: Timur Tabi <timur@freescale.com>

i.MX fixes and some core fixes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

J4740 platform fixes:-
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

CC: Tony Lindgren <tony@atomide.com>
CC: Nicolas Ferre <nicolas.ferre@atmel.com>
CC: Kevin Hilman <khilman@deeprootsystems.com>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
CC: Kuninori Morimoto <morimoto.kuninori@renesas.com>
CC: Daniel Gloeckner <dg@emlix.com>
CC: Manuel Lauss <mano@roarinelk.homelinux.net>
CC: Mike Frysinger <vapier.adi@gmail.com>
CC: Arnaud Patard <apatard@mandriva.com>
CC: Wan ZongShun <mcuos.com@gmail.com>

Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12 14:00:00 +01:00

453 lines
11 KiB
C

/*
* bf5xx-ac97.c -- AC97 support for the ADI blackfin chip.
*
* Author: Roy Huang
* Created: 11th. June 2007
* Copyright: Analog Device Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/wait.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/ac97_codec.h>
#include <sound/initval.h>
#include <sound/soc.h>
#include <asm/irq.h>
#include <asm/portmux.h>
#include <linux/mutex.h>
#include <linux/gpio.h>
#include "bf5xx-sport.h"
#include "bf5xx-ac97.h"
/* Anomaly notes:
* 05000250 - AD1980 is running in TDM mode and RFS/TFS are generated by SPORT
* contrtoller. But, RFSDIV and TFSDIV are always set to 16*16-1,
* while the max AC97 data size is 13*16. The DIV is always larger
* than data size. AD73311 and ad2602 are not running in TDM mode.
* AD1836 and AD73322 depend on external RFS/TFS only. So, this
* anomaly does not affect blackfin sound drivers.
*/
static int *cmd_count;
static int sport_num = CONFIG_SND_BF5XX_SPORT_NUM;
#define SPORT_REQ(x) \
[x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0}
static u16 sport_req[][7] = {
#ifdef SPORT0_TCR1
SPORT_REQ(0),
#endif
#ifdef SPORT1_TCR1
SPORT_REQ(1),
#endif
#ifdef SPORT2_TCR1
SPORT_REQ(2),
#endif
#ifdef SPORT3_TCR1
SPORT_REQ(3),
#endif
};
#define SPORT_PARAMS(x) \
[x] = { \
.dma_rx_chan = CH_SPORT##x##_RX, \
.dma_tx_chan = CH_SPORT##x##_TX, \
.err_irq = IRQ_SPORT##x##_ERROR, \
.regs = (struct sport_register *)SPORT##x##_TCR1, \
}
static struct sport_param sport_params[4] = {
#ifdef SPORT0_TCR1
SPORT_PARAMS(0),
#endif
#ifdef SPORT1_TCR1
SPORT_PARAMS(1),
#endif
#ifdef SPORT2_TCR1
SPORT_PARAMS(2),
#endif
#ifdef SPORT3_TCR1
SPORT_PARAMS(3),
#endif
};
void bf5xx_pcm_to_ac97(struct ac97_frame *dst, const __u16 *src,
size_t count, unsigned int chan_mask)
{
while (count--) {
dst->ac97_tag = TAG_VALID;
if (chan_mask & SP_FL) {
dst->ac97_pcm_r = *src++;
dst->ac97_tag |= TAG_PCM_RIGHT;
}
if (chan_mask & SP_FR) {
dst->ac97_pcm_l = *src++;
dst->ac97_tag |= TAG_PCM_LEFT;
}
#if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT)
if (chan_mask & SP_SR) {
dst->ac97_sl = *src++;
dst->ac97_tag |= TAG_PCM_SL;
}
if (chan_mask & SP_SL) {
dst->ac97_sr = *src++;
dst->ac97_tag |= TAG_PCM_SR;
}
if (chan_mask & SP_LFE) {
dst->ac97_lfe = *src++;
dst->ac97_tag |= TAG_PCM_LFE;
}
if (chan_mask & SP_FC) {
dst->ac97_center = *src++;
dst->ac97_tag |= TAG_PCM_CENTER;
}
#endif
dst++;
}
}
EXPORT_SYMBOL(bf5xx_pcm_to_ac97);
void bf5xx_ac97_to_pcm(const struct ac97_frame *src, __u16 *dst,
size_t count)
{
while (count--) {
*(dst++) = src->ac97_pcm_l;
*(dst++) = src->ac97_pcm_r;
src++;
}
}
EXPORT_SYMBOL(bf5xx_ac97_to_pcm);
static unsigned int sport_tx_curr_frag(struct sport_device *sport)
{
return sport->tx_curr_frag = sport_curr_offset_tx(sport) /
sport->tx_fragsize;
}
static void enqueue_cmd(struct snd_ac97 *ac97, __u16 addr, __u16 data)
{
struct sport_device *sport = sport_handle;
int nextfrag = sport_tx_curr_frag(sport);
struct ac97_frame *nextwrite;
sport_incfrag(sport, &nextfrag, 1);
nextwrite = (struct ac97_frame *)(sport->tx_buf +
nextfrag * sport->tx_fragsize);
pr_debug("sport->tx_buf:%p, nextfrag:0x%x nextwrite:%p, cmd_count:%d\n",
sport->tx_buf, nextfrag, nextwrite, cmd_count[nextfrag]);
nextwrite[cmd_count[nextfrag]].ac97_tag |= TAG_CMD;
nextwrite[cmd_count[nextfrag]].ac97_addr = addr;
nextwrite[cmd_count[nextfrag]].ac97_data = data;
++cmd_count[nextfrag];
pr_debug("ac97_sport: Inserting %02x/%04x into fragment %d\n",
addr >> 8, data, nextfrag);
}
static unsigned short bf5xx_ac97_read(struct snd_ac97 *ac97,
unsigned short reg)
{
struct ac97_frame out_frame[2], in_frame[2];
pr_debug("%s enter 0x%x\n", __func__, reg);
/* When dma descriptor is enabled, the register should not be read */
if (sport_handle->tx_run || sport_handle->rx_run) {
pr_err("Could you send a mail to cliff.cai@analog.com "
"to report this?\n");
return -EFAULT;
}
memset(&out_frame, 0, 2 * sizeof(struct ac97_frame));
memset(&in_frame, 0, 2 * sizeof(struct ac97_frame));
out_frame[0].ac97_tag = TAG_VALID | TAG_CMD;
out_frame[0].ac97_addr = ((reg << 8) | 0x8000);
sport_send_and_recv(sport_handle, (unsigned char *)&out_frame,
(unsigned char *)&in_frame,
2 * sizeof(struct ac97_frame));
return in_frame[1].ac97_data;
}
void bf5xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
unsigned short val)
{
pr_debug("%s enter 0x%x:0x%04x\n", __func__, reg, val);
if (sport_handle->tx_run) {
enqueue_cmd(ac97, (reg << 8), val); /* write */
enqueue_cmd(ac97, (reg << 8) | 0x8000, 0); /* read back */
} else {
struct ac97_frame frame;
memset(&frame, 0, sizeof(struct ac97_frame));
frame.ac97_tag = TAG_VALID | TAG_CMD;
frame.ac97_addr = (reg << 8);
frame.ac97_data = val;
sport_send_and_recv(sport_handle, (unsigned char *)&frame, \
NULL, sizeof(struct ac97_frame));
}
}
static void bf5xx_ac97_warm_reset(struct snd_ac97 *ac97)
{
#if defined(CONFIG_BF54x) || defined(CONFIG_BF561) || \
(defined(BF537_FAMILY) && (CONFIG_SND_BF5XX_SPORT_NUM == 1))
#define CONCAT(a, b, c) a ## b ## c
#define BFIN_SPORT_RFS(x) CONCAT(P_SPORT, x, _RFS)
u16 per = BFIN_SPORT_RFS(CONFIG_SND_BF5XX_SPORT_NUM);
u16 gpio = P_IDENT(BFIN_SPORT_RFS(CONFIG_SND_BF5XX_SPORT_NUM));
pr_debug("%s enter\n", __func__);
peripheral_free(per);
gpio_request(gpio, "bf5xx-ac97");
gpio_direction_output(gpio, 1);
udelay(2);
gpio_set_value(gpio, 0);
udelay(1);
gpio_free(gpio);
peripheral_request(per, "soc-audio");
#else
pr_info("%s: Not implemented\n", __func__);
#endif
}
static void bf5xx_ac97_cold_reset(struct snd_ac97 *ac97)
{
#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
pr_debug("%s enter\n", __func__);
/* It is specified for bf548-ezkit */
gpio_set_value(CONFIG_SND_BF5XX_RESET_GPIO_NUM, 0);
/* Keep reset pin low for 1 ms */
mdelay(1);
gpio_set_value(CONFIG_SND_BF5XX_RESET_GPIO_NUM, 1);
/* Wait for bit clock recover */
mdelay(1);
#else
pr_info("%s: Not implemented\n", __func__);
#endif
}
struct snd_ac97_bus_ops soc_ac97_ops = {
.read = bf5xx_ac97_read,
.write = bf5xx_ac97_write,
.warm_reset = bf5xx_ac97_warm_reset,
.reset = bf5xx_ac97_cold_reset,
};
EXPORT_SYMBOL_GPL(soc_ac97_ops);
#ifdef CONFIG_PM
static int bf5xx_ac97_suspend(struct snd_soc_dai *dai)
{
struct sport_device *sport = snd_soc_dai_get_drvdata(dai);
pr_debug("%s : sport %d\n", __func__, dai->id);
if (!dai->active)
return 0;
if (dai->capture.active)
sport_rx_stop(sport);
if (dai->playback.active)
sport_tx_stop(sport);
return 0;
}
static int bf5xx_ac97_resume(struct snd_soc_dai *dai)
{
int ret;
struct sport_device *sport = snd_soc_dai_get_drvdata(dai);
pr_debug("%s : sport %d\n", __func__, dai->id);
if (!dai->active)
return 0;
#if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT)
ret = sport_set_multichannel(sport, 16, 0x3FF, 1);
#else
ret = sport_set_multichannel(sport, 16, 0x1F, 1);
#endif
if (ret) {
pr_err("SPORT is busy!\n");
return -EBUSY;
}
ret = sport_config_rx(sport, IRFS, 0xF, 0, (16*16-1));
if (ret) {
pr_err("SPORT is busy!\n");
return -EBUSY;
}
ret = sport_config_tx(sport, ITFS, 0xF, 0, (16*16-1));
if (ret) {
pr_err("SPORT is busy!\n");
return -EBUSY;
}
return 0;
}
#else
#define bf5xx_ac97_suspend NULL
#define bf5xx_ac97_resume NULL
#endif
static int bf5xx_ac97_probe(struct snd_soc_dai *dai)
{
int ret = 0;
cmd_count = (int *)get_zeroed_page(GFP_KERNEL);
if (cmd_count == NULL)
return -ENOMEM;
if (peripheral_request_list(sport_req[sport_num], "soc-audio")) {
pr_err("Requesting Peripherals failed\n");
ret = -EFAULT;
goto peripheral_err;
}
#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
/* Request PB3 as reset pin */
if (gpio_request(CONFIG_SND_BF5XX_RESET_GPIO_NUM, "SND_AD198x RESET")) {
pr_err("Failed to request GPIO_%d for reset\n",
CONFIG_SND_BF5XX_RESET_GPIO_NUM);
ret = -1;
goto gpio_err;
}
gpio_direction_output(CONFIG_SND_BF5XX_RESET_GPIO_NUM, 1);
#endif
sport_handle = sport_init(&sport_params[sport_num], 2, \
sizeof(struct ac97_frame), NULL);
if (!sport_handle) {
ret = -ENODEV;
goto sport_err;
}
/*SPORT works in TDM mode to simulate AC97 transfers*/
#if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT)
ret = sport_set_multichannel(sport_handle, 16, 0x3FF, 1);
#else
ret = sport_set_multichannel(sport_handle, 16, 0x1F, 1);
#endif
if (ret) {
pr_err("SPORT is busy!\n");
ret = -EBUSY;
goto sport_config_err;
}
ret = sport_config_rx(sport_handle, IRFS, 0xF, 0, (16*16-1));
if (ret) {
pr_err("SPORT is busy!\n");
ret = -EBUSY;
goto sport_config_err;
}
ret = sport_config_tx(sport_handle, ITFS, 0xF, 0, (16*16-1));
if (ret) {
pr_err("SPORT is busy!\n");
ret = -EBUSY;
goto sport_config_err;
}
return 0;
sport_config_err:
kfree(sport_handle);
sport_err:
#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
gpio_free(CONFIG_SND_BF5XX_RESET_GPIO_NUM);
gpio_err:
#endif
peripheral_free_list(sport_req[sport_num]);
peripheral_err:
free_page((unsigned long)cmd_count);
cmd_count = NULL;
return ret;
}
static int bf5xx_ac97_remove(struct snd_soc_dai *dai)
{
free_page((unsigned long)cmd_count);
cmd_count = NULL;
peripheral_free_list(sport_req[sport_num]);
#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
gpio_free(CONFIG_SND_BF5XX_RESET_GPIO_NUM);
#endif
return 0;
}
struct snd_soc_dai_driver bfin_ac97_dai = {
.ac97_control = 1,
.probe = bf5xx_ac97_probe,
.remove = bf5xx_ac97_remove,
.suspend = bf5xx_ac97_suspend,
.resume = bf5xx_ac97_resume,
.playback = {
.stream_name = "AC97 Playback",
.channels_min = 2,
#if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT)
.channels_max = 6,
#else
.channels_max = 2,
#endif
.rates = SNDRV_PCM_RATE_48000,
.formats = SNDRV_PCM_FMTBIT_S16_LE, },
.capture = {
.stream_name = "AC97 Capture",
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_48000,
.formats = SNDRV_PCM_FMTBIT_S16_LE, },
};
EXPORT_SYMBOL_GPL(bfin_ac97_dai);
static __devinit int asoc_bfin_ac97_probe(struct platform_device *pdev)
{
return snd_soc_register_dai(&pdev->dev, &bfin_ac97_dai);
}
static int __devexit asoc_bfin_ac97_remove(struct platform_device *pdev)
{
snd_soc_unregister_dai(&pdev->dev);
return 0;
}
static struct platform_driver asoc_bfin_ac97_driver = {
.driver = {
.name = "bfin-ac97",
.owner = THIS_MODULE,
},
.probe = asoc_bfin_ac97_probe,
.remove = __devexit_p(asoc_bfin_ac97_remove),
};
static int __init bfin_ac97_init(void)
{
return platform_driver_register(&asoc_bfin_ac97_driver);
}
module_init(bfin_ac97_init);
static void __exit bfin_ac97_exit(void)
{
platform_driver_unregister(&asoc_bfin_ac97_driver);
}
module_exit(bfin_ac97_exit);
MODULE_AUTHOR("Roy Huang");
MODULE_DESCRIPTION("AC97 driver for ADI Blackfin");
MODULE_LICENSE("GPL");