ed402af3c2
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (112 commits) sh: Move SH-4 CPU headers down one more level. sh: Only build in gpio.o when CONFIG_GENERIC_GPIO is selected. sh: Migrate common board headers to mach-common/. sh: Move the CPU definition headers from asm/ to cpu/. serial: sh-sci: Add support SCIF of SH7723 video: add sh_mobile_lcdc platform flags video: remove unused sh_mobile_lcdc platform data sh: remove consistent alloc cruft sh: add dynamic crash base address support sh: reduce Migo-R smc91x overruns sh: Fix up some merge damage. Fix debugfs_create_file's error checking method for arch/sh/mm/ Fix debugfs_create_dir's error checking method for arch/sh/kernel/ sh: ap325rxa: Add support RTC RX-8564LC in AP325RXA board sh: Use sh7720 GPIO on magicpanelr2 board sh: Add sh7720 pinmux code sh: Use sh7203 GPIO on rsk7203 board sh: Add sh7203 pinmux code sh: Use sh7723 GPIO on AP325RXA board sh: Add sh7723 pinmux code ...
771 lines
18 KiB
Text
771 lines
18 KiB
Text
#
|
|
# For a description of the syntax of this configuration file,
|
|
# see Documentation/kbuild/kconfig-language.txt.
|
|
#
|
|
|
|
mainmenu "Linux/SuperH Kernel Configuration"
|
|
|
|
config SUPERH
|
|
def_bool y
|
|
select EMBEDDED
|
|
select HAVE_CLK
|
|
select HAVE_IDE
|
|
select HAVE_OPROFILE
|
|
select HAVE_GENERIC_DMA_COHERENT
|
|
select HAVE_IOREMAP_PROT if MMU
|
|
help
|
|
The SuperH is a RISC processor targeted for use in embedded systems
|
|
and consumer electronics; it was also used in the Sega Dreamcast
|
|
gaming console. The SuperH port has a home page at
|
|
<http://www.linux-sh.org/>.
|
|
|
|
config SUPERH32
|
|
def_bool !SUPERH64
|
|
select HAVE_KPROBES
|
|
select HAVE_KRETPROBES
|
|
select HAVE_ARCH_TRACEHOOK
|
|
select HAVE_FTRACE
|
|
|
|
config SUPERH64
|
|
def_bool y if CPU_SH5
|
|
|
|
config ARCH_DEFCONFIG
|
|
string
|
|
default "arch/sh/configs/shx3_defconfig" if SUPERH32
|
|
default "arch/sh/configs/cayman_defconfig" if SUPERH64
|
|
|
|
config RWSEM_GENERIC_SPINLOCK
|
|
def_bool y
|
|
|
|
config RWSEM_XCHGADD_ALGORITHM
|
|
bool
|
|
|
|
config GENERIC_BUG
|
|
def_bool y
|
|
depends on BUG && SUPERH32
|
|
|
|
config GENERIC_FIND_NEXT_BIT
|
|
def_bool y
|
|
|
|
config GENERIC_HWEIGHT
|
|
def_bool y
|
|
|
|
config GENERIC_HARDIRQS
|
|
def_bool y
|
|
|
|
config GENERIC_HARDIRQS_NO__DO_IRQ
|
|
def_bool y
|
|
|
|
config GENERIC_IRQ_PROBE
|
|
def_bool y
|
|
|
|
config GENERIC_GPIO
|
|
def_bool n
|
|
|
|
config GENERIC_CALIBRATE_DELAY
|
|
bool
|
|
|
|
config GENERIC_IOMAP
|
|
bool
|
|
|
|
config GENERIC_TIME
|
|
def_bool n
|
|
|
|
config GENERIC_CLOCKEVENTS
|
|
def_bool n
|
|
|
|
config GENERIC_CLOCKEVENTS_BROADCAST
|
|
bool
|
|
|
|
config GENERIC_LOCKBREAK
|
|
def_bool y
|
|
depends on SMP && PREEMPT
|
|
|
|
config SYS_SUPPORTS_PM
|
|
bool
|
|
|
|
config SYS_SUPPORTS_APM_EMULATION
|
|
bool
|
|
select SYS_SUPPORTS_PM
|
|
|
|
config SYS_SUPPORTS_SMP
|
|
bool
|
|
|
|
config SYS_SUPPORTS_NUMA
|
|
bool
|
|
|
|
config SYS_SUPPORTS_PCI
|
|
bool
|
|
|
|
config STACKTRACE_SUPPORT
|
|
def_bool y
|
|
|
|
config LOCKDEP_SUPPORT
|
|
def_bool y
|
|
|
|
config HAVE_LATENCYTOP_SUPPORT
|
|
def_bool y
|
|
depends on !SMP
|
|
|
|
config ARCH_HAS_ILOG2_U32
|
|
def_bool n
|
|
|
|
config ARCH_HAS_ILOG2_U64
|
|
def_bool n
|
|
|
|
config ARCH_NO_VIRT_TO_BUS
|
|
def_bool y
|
|
|
|
config IO_TRAPPED
|
|
bool
|
|
|
|
source "init/Kconfig"
|
|
|
|
source "kernel/Kconfig.freezer"
|
|
|
|
menu "System type"
|
|
|
|
#
|
|
# Processor families
|
|
#
|
|
config CPU_SH2
|
|
bool
|
|
|
|
config CPU_SH2A
|
|
bool
|
|
select CPU_SH2
|
|
|
|
config CPU_SH3
|
|
bool
|
|
select CPU_HAS_INTEVT
|
|
select CPU_HAS_SR_RB
|
|
|
|
config CPU_SH4
|
|
bool
|
|
select CPU_HAS_INTEVT
|
|
select CPU_HAS_SR_RB
|
|
select CPU_HAS_PTEA if !CPU_SH4A || CPU_SHX2
|
|
select CPU_HAS_FPU if !CPU_SH4AL_DSP
|
|
|
|
config CPU_SH4A
|
|
bool
|
|
select CPU_SH4
|
|
|
|
config CPU_SH4AL_DSP
|
|
bool
|
|
select CPU_SH4A
|
|
select CPU_HAS_DSP
|
|
|
|
config CPU_SH5
|
|
bool
|
|
select CPU_HAS_FPU
|
|
|
|
config CPU_SHX2
|
|
bool
|
|
|
|
config CPU_SHX3
|
|
bool
|
|
|
|
choice
|
|
prompt "Processor sub-type selection"
|
|
|
|
#
|
|
# Processor subtypes
|
|
#
|
|
|
|
# SH-2 Processor Support
|
|
|
|
config CPU_SUBTYPE_SH7619
|
|
bool "Support SH7619 processor"
|
|
select CPU_SH2
|
|
|
|
# SH-2A Processor Support
|
|
|
|
config CPU_SUBTYPE_SH7203
|
|
bool "Support SH7203 processor"
|
|
select CPU_SH2A
|
|
select CPU_HAS_FPU
|
|
|
|
config CPU_SUBTYPE_SH7206
|
|
bool "Support SH7206 processor"
|
|
select CPU_SH2A
|
|
|
|
config CPU_SUBTYPE_SH7263
|
|
bool "Support SH7263 processor"
|
|
select CPU_SH2A
|
|
select CPU_HAS_FPU
|
|
|
|
config CPU_SUBTYPE_MXG
|
|
bool "Support MX-G processor"
|
|
select CPU_SH2A
|
|
help
|
|
Select MX-G if running on an R8A03022BG part.
|
|
|
|
# SH-3 Processor Support
|
|
|
|
config CPU_SUBTYPE_SH7705
|
|
bool "Support SH7705 processor"
|
|
select CPU_SH3
|
|
|
|
config CPU_SUBTYPE_SH7706
|
|
bool "Support SH7706 processor"
|
|
select CPU_SH3
|
|
help
|
|
Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU.
|
|
|
|
config CPU_SUBTYPE_SH7707
|
|
bool "Support SH7707 processor"
|
|
select CPU_SH3
|
|
help
|
|
Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU.
|
|
|
|
config CPU_SUBTYPE_SH7708
|
|
bool "Support SH7708 processor"
|
|
select CPU_SH3
|
|
help
|
|
Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or
|
|
if you have a 100 Mhz SH-3 HD6417708R CPU.
|
|
|
|
config CPU_SUBTYPE_SH7709
|
|
bool "Support SH7709 processor"
|
|
select CPU_SH3
|
|
help
|
|
Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU.
|
|
|
|
config CPU_SUBTYPE_SH7710
|
|
bool "Support SH7710 processor"
|
|
select CPU_SH3
|
|
select CPU_HAS_DSP
|
|
help
|
|
Select SH7710 if you have a SH3-DSP SH7710 CPU.
|
|
|
|
config CPU_SUBTYPE_SH7712
|
|
bool "Support SH7712 processor"
|
|
select CPU_SH3
|
|
select CPU_HAS_DSP
|
|
help
|
|
Select SH7712 if you have a SH3-DSP SH7712 CPU.
|
|
|
|
config CPU_SUBTYPE_SH7720
|
|
bool "Support SH7720 processor"
|
|
select CPU_SH3
|
|
select CPU_HAS_DSP
|
|
help
|
|
Select SH7720 if you have a SH3-DSP SH7720 CPU.
|
|
|
|
config CPU_SUBTYPE_SH7721
|
|
bool "Support SH7721 processor"
|
|
select CPU_SH3
|
|
select CPU_HAS_DSP
|
|
help
|
|
Select SH7721 if you have a SH3-DSP SH7721 CPU.
|
|
|
|
# SH-4 Processor Support
|
|
|
|
config CPU_SUBTYPE_SH7750
|
|
bool "Support SH7750 processor"
|
|
select CPU_SH4
|
|
help
|
|
Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.
|
|
|
|
config CPU_SUBTYPE_SH7091
|
|
bool "Support SH7091 processor"
|
|
select CPU_SH4
|
|
help
|
|
Select SH7091 if you have an SH-4 based Sega device (such as
|
|
the Dreamcast, Naomi, and Naomi 2).
|
|
|
|
config CPU_SUBTYPE_SH7750R
|
|
bool "Support SH7750R processor"
|
|
select CPU_SH4
|
|
|
|
config CPU_SUBTYPE_SH7750S
|
|
bool "Support SH7750S processor"
|
|
select CPU_SH4
|
|
|
|
config CPU_SUBTYPE_SH7751
|
|
bool "Support SH7751 processor"
|
|
select CPU_SH4
|
|
help
|
|
Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU,
|
|
or if you have a HD6417751R CPU.
|
|
|
|
config CPU_SUBTYPE_SH7751R
|
|
bool "Support SH7751R processor"
|
|
select CPU_SH4
|
|
|
|
config CPU_SUBTYPE_SH7760
|
|
bool "Support SH7760 processor"
|
|
select CPU_SH4
|
|
|
|
config CPU_SUBTYPE_SH4_202
|
|
bool "Support SH4-202 processor"
|
|
select CPU_SH4
|
|
|
|
# SH-4A Processor Support
|
|
|
|
config CPU_SUBTYPE_SH7723
|
|
bool "Support SH7723 processor"
|
|
select CPU_SH4A
|
|
select CPU_SHX2
|
|
select ARCH_SPARSEMEM_ENABLE
|
|
help
|
|
Select SH7723 if you have an SH-MobileR2 CPU.
|
|
|
|
config CPU_SUBTYPE_SH7763
|
|
bool "Support SH7763 processor"
|
|
select CPU_SH4A
|
|
help
|
|
Select SH7763 if you have a SH4A SH7763(R5S77631) CPU.
|
|
|
|
config CPU_SUBTYPE_SH7770
|
|
bool "Support SH7770 processor"
|
|
select CPU_SH4A
|
|
|
|
config CPU_SUBTYPE_SH7780
|
|
bool "Support SH7780 processor"
|
|
select CPU_SH4A
|
|
|
|
config CPU_SUBTYPE_SH7785
|
|
bool "Support SH7785 processor"
|
|
select CPU_SH4A
|
|
select CPU_SHX2
|
|
select ARCH_SPARSEMEM_ENABLE
|
|
select SYS_SUPPORTS_NUMA
|
|
|
|
config CPU_SUBTYPE_SHX3
|
|
bool "Support SH-X3 processor"
|
|
select CPU_SH4A
|
|
select CPU_SHX3
|
|
select ARCH_SPARSEMEM_ENABLE
|
|
select SYS_SUPPORTS_NUMA
|
|
select SYS_SUPPORTS_SMP
|
|
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
|
|
|
|
# SH4AL-DSP Processor Support
|
|
|
|
config CPU_SUBTYPE_SH7343
|
|
bool "Support SH7343 processor"
|
|
select CPU_SH4AL_DSP
|
|
|
|
config CPU_SUBTYPE_SH7722
|
|
bool "Support SH7722 processor"
|
|
select CPU_SH4AL_DSP
|
|
select CPU_SHX2
|
|
select ARCH_SPARSEMEM_ENABLE
|
|
select SYS_SUPPORTS_NUMA
|
|
|
|
config CPU_SUBTYPE_SH7366
|
|
bool "Support SH7366 processor"
|
|
select CPU_SH4AL_DSP
|
|
select CPU_SHX2
|
|
select ARCH_SPARSEMEM_ENABLE
|
|
select SYS_SUPPORTS_NUMA
|
|
|
|
# SH-5 Processor Support
|
|
|
|
config CPU_SUBTYPE_SH5_101
|
|
bool "Support SH5-101 processor"
|
|
select CPU_SH5
|
|
|
|
config CPU_SUBTYPE_SH5_103
|
|
bool "Support SH5-103 processor"
|
|
select CPU_SH5
|
|
|
|
endchoice
|
|
|
|
source "arch/sh/mm/Kconfig"
|
|
|
|
source "arch/sh/Kconfig.cpu"
|
|
|
|
source "arch/sh/boards/Kconfig"
|
|
|
|
menu "Timer and clock configuration"
|
|
|
|
config SH_TMU
|
|
def_bool y
|
|
prompt "TMU timer support"
|
|
depends on CPU_SH3 || CPU_SH4
|
|
select GENERIC_TIME
|
|
select GENERIC_CLOCKEVENTS
|
|
help
|
|
This enables the use of the TMU as the system timer.
|
|
|
|
config SH_CMT
|
|
def_bool y
|
|
prompt "CMT timer support"
|
|
depends on CPU_SH2 && !CPU_SUBTYPE_MXG
|
|
help
|
|
This enables the use of the CMT as the system timer.
|
|
|
|
config SH_MTU2
|
|
def_bool n
|
|
prompt "MTU2 timer support"
|
|
depends on CPU_SH2A
|
|
help
|
|
This enables the use of the MTU2 as the system timer.
|
|
|
|
config SH_TIMER_IRQ
|
|
int
|
|
default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || \
|
|
CPU_SUBTYPE_SH7763
|
|
default "86" if CPU_SUBTYPE_SH7619
|
|
default "140" if CPU_SUBTYPE_SH7206
|
|
default "142" if CPU_SUBTYPE_SH7203
|
|
default "238" if CPU_SUBTYPE_MXG
|
|
default "16"
|
|
|
|
config SH_PCLK_FREQ
|
|
int "Peripheral clock frequency (in Hz)"
|
|
default "27000000" if CPU_SUBTYPE_SH7343
|
|
default "31250000" if CPU_SUBTYPE_SH7619
|
|
default "32000000" if CPU_SUBTYPE_SH7722
|
|
default "33333333" if CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7723 || \
|
|
CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
|
|
CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \
|
|
CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG
|
|
default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
|
|
default "66000000" if CPU_SUBTYPE_SH4_202
|
|
default "50000000"
|
|
help
|
|
This option is used to specify the peripheral clock frequency.
|
|
This is necessary for determining the reference clock value on
|
|
platforms lacking an RTC.
|
|
|
|
config SH_CLK_MD
|
|
int "CPU Mode Pin Setting"
|
|
depends on CPU_SH2
|
|
default 6 if CPU_SUBTYPE_SH7206
|
|
default 5 if CPU_SUBTYPE_SH7619
|
|
default 0
|
|
help
|
|
MD2 - MD0 pin setting.
|
|
|
|
source "kernel/time/Kconfig"
|
|
|
|
endmenu
|
|
|
|
menu "CPU Frequency scaling"
|
|
|
|
source "drivers/cpufreq/Kconfig"
|
|
|
|
config SH_CPU_FREQ
|
|
tristate "SuperH CPU Frequency driver"
|
|
depends on CPU_FREQ
|
|
select CPU_FREQ_TABLE
|
|
help
|
|
This adds the cpufreq driver for SuperH. At present, only
|
|
the SH-4 is supported.
|
|
|
|
For details, take a look at <file:Documentation/cpu-freq>.
|
|
|
|
If unsure, say N.
|
|
|
|
endmenu
|
|
|
|
source "arch/sh/drivers/Kconfig"
|
|
|
|
endmenu
|
|
|
|
config ISA_DMA_API
|
|
bool
|
|
|
|
menu "Kernel features"
|
|
|
|
source kernel/Kconfig.hz
|
|
|
|
config KEXEC
|
|
bool "kexec system call (EXPERIMENTAL)"
|
|
depends on SUPERH32 && EXPERIMENTAL
|
|
help
|
|
kexec is a system call that implements the ability to shutdown your
|
|
current kernel, and to start another kernel. It is like a reboot
|
|
but it is independent of the system firmware. And like a reboot
|
|
you can start any kernel with it, not just Linux.
|
|
|
|
The name comes from the similarity to the exec system call.
|
|
|
|
It is an ongoing process to be certain the hardware in a machine
|
|
is properly shutdown, so do not be surprised if this code does not
|
|
initially work for you. It may help to enable device hotplugging
|
|
support. As of this writing the exact hardware interface is
|
|
strongly in flux, so no good recommendation can be made.
|
|
|
|
config CRASH_DUMP
|
|
bool "kernel crash dumps (EXPERIMENTAL)"
|
|
depends on SUPERH32 && EXPERIMENTAL
|
|
help
|
|
Generate crash dump after being started by kexec.
|
|
This should be normally only set in special crash dump kernels
|
|
which are loaded in the main kernel with kexec-tools into
|
|
a specially reserved region and then later executed after
|
|
a crash by kdump/kexec. The crash dump kernel must be compiled
|
|
to a memory address not used by the main kernel using
|
|
MEMORY_START.
|
|
|
|
For more details see Documentation/kdump/kdump.txt
|
|
|
|
config SECCOMP
|
|
bool "Enable seccomp to safely compute untrusted bytecode"
|
|
depends on PROC_FS
|
|
help
|
|
This kernel feature is useful for number crunching applications
|
|
that may need to compute untrusted bytecode during their
|
|
execution. By using pipes or other transports made available to
|
|
the process as file descriptors supporting the read/write
|
|
syscalls, it's possible to isolate those applications in
|
|
their own address space using seccomp. Once seccomp is
|
|
enabled via prctl, it cannot be disabled and the task is only
|
|
allowed to execute a few safe syscalls defined by each seccomp
|
|
mode.
|
|
|
|
If unsure, say N.
|
|
|
|
config SMP
|
|
bool "Symmetric multi-processing support"
|
|
depends on SYS_SUPPORTS_SMP
|
|
select USE_GENERIC_SMP_HELPERS
|
|
---help---
|
|
This enables support for systems with more than one CPU. If you have
|
|
a system with only one CPU, like most personal computers, say N. If
|
|
you have a system with more than one CPU, say Y.
|
|
|
|
If you say N here, the kernel will run on single and multiprocessor
|
|
machines, but will use only one CPU of a multiprocessor machine. If
|
|
you say Y here, the kernel will run on many, but not all,
|
|
singleprocessor machines. On a singleprocessor machine, the kernel
|
|
will run faster if you say N here.
|
|
|
|
People using multiprocessor machines who say Y here should also say
|
|
Y to "Enhanced Real Time Clock Support", below.
|
|
|
|
See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
|
|
available at <http://www.tldp.org/docs.html#howto>.
|
|
|
|
If you don't know what to do here, say N.
|
|
|
|
config NR_CPUS
|
|
int "Maximum number of CPUs (2-32)"
|
|
range 2 32
|
|
depends on SMP
|
|
default "4" if CPU_SHX3
|
|
default "2"
|
|
help
|
|
This allows you to specify the maximum number of CPUs which this
|
|
kernel will support. The maximum supported value is 32 and the
|
|
minimum value which makes sense is 2.
|
|
|
|
This is purely to save memory - each supported CPU adds
|
|
approximately eight kilobytes to the kernel image.
|
|
|
|
source "kernel/Kconfig.preempt"
|
|
|
|
config GUSA
|
|
def_bool y
|
|
depends on !SMP && SUPERH32
|
|
help
|
|
This enables support for gUSA (general UserSpace Atomicity).
|
|
This is the default implementation for both UP and non-ll/sc
|
|
CPUs, and is used by the libc, amongst others.
|
|
|
|
For additional information, design information can be found
|
|
in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>.
|
|
|
|
This should only be disabled for special cases where alternate
|
|
atomicity implementations exist.
|
|
|
|
config GUSA_RB
|
|
bool "Implement atomic operations by roll-back (gRB) (EXPERIMENTAL)"
|
|
depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A)
|
|
help
|
|
Enabling this option will allow the kernel to implement some
|
|
atomic operations using a software implemention of load-locked/
|
|
store-conditional (LLSC). On machines which do not have hardware
|
|
LLSC, this should be more efficient than the other alternative of
|
|
disabling insterrupts around the atomic sequence.
|
|
|
|
endmenu
|
|
|
|
menu "Boot options"
|
|
|
|
config ZERO_PAGE_OFFSET
|
|
hex "Zero page offset"
|
|
default "0x00004000" if SH_SH03
|
|
default "0x00010000" if PAGE_SIZE_64KB
|
|
default "0x00002000" if PAGE_SIZE_8KB
|
|
default "0x00001000"
|
|
help
|
|
This sets the default offset of zero page.
|
|
|
|
config BOOT_LINK_OFFSET
|
|
hex "Link address offset for booting"
|
|
default "0x00800000"
|
|
help
|
|
This option allows you to set the link address offset of the zImage.
|
|
This can be useful if you are on a board which has a small amount of
|
|
memory.
|
|
|
|
config UBC_WAKEUP
|
|
bool "Wakeup UBC on startup"
|
|
depends on CPU_SH4 && !CPU_SH4A
|
|
help
|
|
Selecting this option will wakeup the User Break Controller (UBC) on
|
|
startup. Although the UBC is left in an awake state when the processor
|
|
comes up, some boot loaders misbehave by putting the UBC to sleep in a
|
|
power saving state, which causes issues with things like ptrace().
|
|
|
|
If unsure, say N.
|
|
|
|
config CMDLINE_BOOL
|
|
bool "Default bootloader kernel arguments"
|
|
|
|
config CMDLINE
|
|
string "Initial kernel command string"
|
|
depends on CMDLINE_BOOL
|
|
default "console=ttySC1,115200"
|
|
|
|
endmenu
|
|
|
|
menu "Bus options"
|
|
|
|
# Even on SuperH devices which don't have an ISA bus,
|
|
# this variable helps the PCMCIA modules handle
|
|
# IRQ requesting properly -- Greg Banks.
|
|
#
|
|
# Though we're generally not interested in it when
|
|
# we're not using PCMCIA, so we make it dependent on
|
|
# PCMCIA outright. -- PFM.
|
|
config ISA
|
|
def_bool y
|
|
depends on PCMCIA && HD6446X_SERIES
|
|
help
|
|
Find out whether you have ISA slots on your motherboard. ISA is the
|
|
name of a bus system, i.e. the way the CPU talks to the other stuff
|
|
inside your box. Other bus systems are PCI, EISA, MicroChannel
|
|
(MCA) or VESA. ISA is an older system, now being displaced by PCI;
|
|
newer boards don't support it. If you have ISA, say Y, otherwise N.
|
|
|
|
config EISA
|
|
bool
|
|
---help---
|
|
The Extended Industry Standard Architecture (EISA) bus was
|
|
developed as an open alternative to the IBM MicroChannel bus.
|
|
|
|
The EISA bus provided some of the features of the IBM MicroChannel
|
|
bus while maintaining backward compatibility with cards made for
|
|
the older ISA bus. The EISA bus saw limited use between 1988 and
|
|
1995 when it was made obsolete by the PCI bus.
|
|
|
|
Say Y here if you are building a kernel for an EISA-based machine.
|
|
|
|
Otherwise, say N.
|
|
|
|
config MCA
|
|
bool
|
|
help
|
|
MicroChannel Architecture is found in some IBM PS/2 machines and
|
|
laptops. It is a bus system similar to PCI or ISA. See
|
|
<file:Documentation/mca.txt> (and especially the web page given
|
|
there) before attempting to build an MCA bus kernel.
|
|
|
|
config SBUS
|
|
bool
|
|
|
|
config SUPERHYWAY
|
|
tristate "SuperHyway Bus support"
|
|
depends on CPU_SUBTYPE_SH4_202
|
|
|
|
config MAPLE
|
|
bool "Maple Bus support"
|
|
depends on SH_DREAMCAST
|
|
help
|
|
The Maple Bus is SEGA's serial communication bus for peripherals
|
|
on the Dreamcast. Without this bus support you won't be able to
|
|
get your Dreamcast keyboard etc to work, so most users
|
|
probably want to say 'Y' here, unless you are only using the
|
|
Dreamcast with a serial line terminal or a remote network
|
|
connection.
|
|
|
|
config CF_ENABLER
|
|
bool "Compact Flash Enabler support"
|
|
depends on SOLUTION_ENGINE || SH_SH03
|
|
---help---
|
|
Compact Flash is a small, removable mass storage device introduced
|
|
in 1994 originally as a PCMCIA device. If you say `Y' here, you
|
|
compile in support for Compact Flash devices directly connected to
|
|
a SuperH processor. A Compact Flash FAQ is available at
|
|
<http://www.compactflash.org/faqs/faq.htm>.
|
|
|
|
If your board has "Directly Connected" CompactFlash at area 5 or 6,
|
|
you may want to enable this option. Then, you can use CF as
|
|
primary IDE drive (only tested for SanDisk).
|
|
|
|
If in doubt, select 'N'.
|
|
|
|
choice
|
|
prompt "Compact Flash Connection Area"
|
|
depends on CF_ENABLER
|
|
default CF_AREA6
|
|
|
|
config CF_AREA5
|
|
bool "Area5"
|
|
help
|
|
If your board has "Directly Connected" CompactFlash, You should
|
|
select the area where your CF is connected to.
|
|
|
|
- "Area5" if CompactFlash is connected to Area 5 (0x14000000)
|
|
- "Area6" if it is connected to Area 6 (0x18000000)
|
|
|
|
"Area6" will work for most boards.
|
|
|
|
config CF_AREA6
|
|
bool "Area6"
|
|
|
|
endchoice
|
|
|
|
config CF_BASE_ADDR
|
|
hex
|
|
depends on CF_ENABLER
|
|
default "0xb8000000" if CF_AREA6
|
|
default "0xb4000000" if CF_AREA5
|
|
|
|
source "arch/sh/drivers/pci/Kconfig"
|
|
|
|
source "drivers/pci/Kconfig"
|
|
|
|
source "drivers/pcmcia/Kconfig"
|
|
|
|
source "drivers/pci/hotplug/Kconfig"
|
|
|
|
endmenu
|
|
|
|
menu "Executable file formats"
|
|
|
|
source "fs/Kconfig.binfmt"
|
|
|
|
endmenu
|
|
|
|
menu "Power management options (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL && SYS_SUPPORTS_PM
|
|
|
|
config ARCH_SUSPEND_POSSIBLE
|
|
def_bool y
|
|
depends on !SMP
|
|
|
|
source kernel/power/Kconfig
|
|
|
|
endmenu
|
|
|
|
source "net/Kconfig"
|
|
|
|
source "drivers/Kconfig"
|
|
|
|
source "fs/Kconfig"
|
|
|
|
source "arch/sh/Kconfig.debug"
|
|
|
|
source "security/Kconfig"
|
|
|
|
source "crypto/Kconfig"
|
|
|
|
source "lib/Kconfig"
|