Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/sound/soc/samsung/rx1950_uda1380.c
Vasily Khoruzhick b60fc60cea ASoC: RX1950: Enable Mic Jack during glue driver init 
Enable Mic Jack during glue driver init, otherwise capture will not work.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-10 11:47:49 +00:00

320 lines
7.5 KiB
C
Raw Blame History

/*
* rx1950.c -- ALSA Soc Audio Layer
*
* Copyright (c) 2010 Vasily Khoruzhick <anarsoul@gmail.com>
*
* Based on smdk2440.c and magician.c
*
* Authors: Graeme Gregory graeme.gregory@wolfsonmicro.com
* Philipp Zabel <philipp.zabel@gmail.com>
* Denis Grigoriev <dgreenday@gmail.com>
* Vasily Khoruzhick <anarsoul@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/clk.h>
#include <sound/soc.h>
#include <sound/uda1380.h>
#include <sound/jack.h>
#include <plat/regs-iis.h>
#include <mach/regs-clock.h>
#include <asm/mach-types.h>
#include "dma.h"
#include "s3c24xx-i2s.h"
#include "../codecs/uda1380.h"
static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd);
static int rx1950_startup(struct snd_pcm_substream *substream);
static int rx1950_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params);
static int rx1950_spk_power(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event);
static unsigned int rates[] = {
16000,
44100,
48000,
};
static struct snd_pcm_hw_constraint_list hw_rates = {
.count = ARRAY_SIZE(rates),
.list = rates,
.mask = 0,
};
static struct snd_soc_jack hp_jack;
static struct snd_soc_jack_pin hp_jack_pins[] = {
{
.pin = "Headphone Jack",
.mask = SND_JACK_HEADPHONE,
},
{
.pin = "Speaker",
.mask = SND_JACK_HEADPHONE,
.invert = 1,
},
};
static struct snd_soc_jack_gpio hp_jack_gpios[] = {
[0] = {
.gpio = S3C2410_GPG(12),
.name = "hp-gpio",
.report = SND_JACK_HEADPHONE,
.invert = 1,
.debounce_time = 200,
},
};
static struct snd_soc_ops rx1950_ops = {
.startup = rx1950_startup,
.hw_params = rx1950_hw_params,
};
/* s3c24xx digital audio interface glue - connects codec <--> CPU */
static struct snd_soc_dai_link rx1950_uda1380_dai[] = {
{
.name = "uda1380",
.stream_name = "UDA1380 Duplex",
.cpu_dai_name = "s3c24xx-iis",
.codec_dai_name = "uda1380-hifi",
.init = rx1950_uda1380_init,
.platform_name = "samsung-audio",
.codec_name = "uda1380-codec.0-001a",
.ops = &rx1950_ops,
},
};
static struct snd_soc_card rx1950_asoc = {
.name = "rx1950",
.dai_link = rx1950_uda1380_dai,
.num_links = ARRAY_SIZE(rx1950_uda1380_dai),
};
/* rx1950 machine dapm widgets */
static const struct snd_soc_dapm_widget uda1380_dapm_widgets[] = {
SND_SOC_DAPM_HP("Headphone Jack", NULL),
SND_SOC_DAPM_MIC("Mic Jack", NULL),
SND_SOC_DAPM_SPK("Speaker", rx1950_spk_power),
};
/* rx1950 machine audio_map */
static const struct snd_soc_dapm_route audio_map[] = {
/* headphone connected to VOUTLHP, VOUTRHP */
{"Headphone Jack", NULL, "VOUTLHP"},
{"Headphone Jack", NULL, "VOUTRHP"},
/* ext speaker connected to VOUTL, VOUTR */
{"Speaker", NULL, "VOUTL"},
{"Speaker", NULL, "VOUTR"},
/* mic is connected to VINM */
{"VINM", NULL, "Mic Jack"},
};
static struct platform_device *s3c24xx_snd_device;
static int rx1950_startup(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
runtime->hw.rate_min = hw_rates.list[0];
runtime->hw.rate_max = hw_rates.list[hw_rates.count - 1];
runtime->hw.rates = SNDRV_PCM_RATE_KNOT;
return snd_pcm_hw_constraint_list(runtime, 0,
SNDRV_PCM_HW_PARAM_RATE,
&hw_rates);
}
static int rx1950_spk_power(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
if (SND_SOC_DAPM_EVENT_ON(event))
gpio_set_value(S3C2410_GPA(1), 1);
else
gpio_set_value(S3C2410_GPA(1), 0);
return 0;
}
static int rx1950_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
int div;
int ret;
unsigned int rate = params_rate(params);
int clk_source, fs_mode;
switch (rate) {
case 16000:
case 48000:
clk_source = S3C24XX_CLKSRC_PCLK;
fs_mode = S3C2410_IISMOD_256FS;
div = s3c24xx_i2s_get_clockrate() / (256 * rate);
if (s3c24xx_i2s_get_clockrate() % (256 * rate) > (128 * rate))
div++;
break;
case 44100:
case 88200:
clk_source = S3C24XX_CLKSRC_MPLL;
fs_mode = S3C2410_IISMOD_384FS;
div = 1;
break;
default:
printk(KERN_ERR "%s: rate %d is not supported\n",
__func__, rate);
return -EINVAL;
}
/* set codec DAI configuration */
ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
if (ret < 0)
return ret;
/* set cpu DAI configuration */
ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
if (ret < 0)
return ret;
/* select clock source */
ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source, rate,
SND_SOC_CLOCK_OUT);
if (ret < 0)
return ret;
/* set MCLK division for sample rate */
ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
fs_mode);
if (ret < 0)
return ret;
/* set BCLK division for sample rate */
ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK,
S3C2410_IISMOD_32FS);
if (ret < 0)
return ret;
/* set prescaler division for sample rate */
ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
S3C24XX_PRESCALE(div, div));
if (ret < 0)
return ret;
return 0;
}
static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_codec *codec = rtd->codec;
struct snd_soc_dapm_context *dapm = &codec->dapm;
int err;
/* Add rx1950 specific widgets */
err = snd_soc_dapm_new_controls(dapm, uda1380_dapm_widgets,
ARRAY_SIZE(uda1380_dapm_widgets));
if (err)
return err;
/* Set up rx1950 specific audio path audio_mapnects */
err = snd_soc_dapm_add_routes(dapm, audio_map,
ARRAY_SIZE(audio_map));
if (err)
return err;
snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
snd_soc_dapm_enable_pin(dapm, "Speaker");
snd_soc_dapm_enable_pin(dapm, "Mic Jack");
snd_soc_dapm_sync(dapm);
snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE,
&hp_jack);
snd_soc_jack_add_pins(&hp_jack, ARRAY_SIZE(hp_jack_pins),
hp_jack_pins);
snd_soc_jack_add_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
hp_jack_gpios);
return 0;
}
static int __init rx1950_init(void)
{
int ret;
if (!machine_is_rx1950())
return -ENODEV;
/* configure some gpios */
ret = gpio_request(S3C2410_GPA(1), "speaker-power");
if (ret)
goto err_gpio;
ret = gpio_direction_output(S3C2410_GPA(1), 0);
if (ret)
goto err_gpio_conf;
s3c24xx_snd_device = platform_device_alloc("soc-audio", -1);
if (!s3c24xx_snd_device) {
ret = -ENOMEM;
goto err_plat_alloc;
}
platform_set_drvdata(s3c24xx_snd_device, &rx1950_asoc);
ret = platform_device_add(s3c24xx_snd_device);
if (ret) {
platform_device_put(s3c24xx_snd_device);
goto err_plat_add;
}
return 0;
err_plat_add:
err_plat_alloc:
err_gpio_conf:
gpio_free(S3C2410_GPA(1));
err_gpio:
return ret;
}
static void __exit rx1950_exit(void)
{
platform_device_unregister(s3c24xx_snd_device);
snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
hp_jack_gpios);
gpio_free(S3C2410_GPA(1));
}
module_init(rx1950_init);
module_exit(rx1950_exit);
/* Module information */
MODULE_AUTHOR("Vasily Khoruzhick");
MODULE_DESCRIPTION("ALSA SoC RX1950");
MODULE_LICENSE("GPL");
Reference in a new issue View git blame Copy permalink