kernel-fxtec-pro1x/arch/mn10300/boot/compressed/head.S
Akira Takeuchi 368dd5acd1 MN10300: And Panasonic AM34 subarch and implement SMP
Implement the Panasonic MN10300 AM34 CPU subarch and implement SMP support for
MN10300.  Also implement support for the MN2WS0060 processor and the ASB2364
evaluation board which are AM34 based.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:55 +01:00

151 lines
3.1 KiB
ArmAsm

/* Boot entry point for a compressed MN10300 kernel
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
.section .text
#define DEBUG
#include <linux/linkage.h>
#include <asm/cpu-regs.h>
#include <asm/cache.h>
#ifdef CONFIG_SMP
#include <proc/smp-regs.h>
#endif
.globl startup_32
startup_32:
#ifdef CONFIG_SMP
#
# Secondary CPUs jump directly to the kernel entry point
#
# Must save primary CPU's D0-D2 registers as they hold boot parameters
#
mov (CPUID), d3
and CPUID_MASK,d3
beq startup_primary
mov CONFIG_KERNEL_TEXT_ADDRESS,a0
jmp (a0)
startup_primary:
#endif /* CONFIG_SMP */
# first save parameters from bootloader
mov param_save_area,a0
mov d0,(a0)
mov d1,(4,a0)
mov d2,(8,a0)
mov sp,a3
mov decomp_stack+0x2000-4,a0
mov a0,sp
# invalidate and enable both of the caches
mov CHCTR,a0
clr d0
movhu d0,(a0) # turn off first
mov CHCTR_ICINV|CHCTR_DCINV,d0
movhu d0,(a0)
setlb
mov (a0),d0
btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy
lne
#ifdef CONFIG_MN10300_CACHE_ENABLED
#ifdef CONFIG_MN10300_CACHE_WBACK
mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0
#else
mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0
#endif /* WBACK */
movhu d0,(a0) # enable
#endif /* !ENABLED */
# clear the BSS area
mov __bss_start,a0
mov _end,a1
clr d0
bssclear:
cmp a1,a0
bge bssclear_end
movbu d0,(a0)
inc a0
bra bssclear
bssclear_end:
# decompress the kernel
call decompress_kernel[],0
#ifdef CONFIG_MN10300_CACHE_WBACK
call mn10300_dcache_flush_inv[],0
#endif
# disable caches again
mov CHCTR,a0
clr d0
movhu d0,(a0)
setlb
mov (a0),d0
btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy
lne
mov param_save_area,a0
mov (a0),d0
mov (4,a0),d1
mov (8,a0),d2
# jump to the kernel proper entry point
mov a3,sp
mov CONFIG_KERNEL_TEXT_ADDRESS,a0
jmp (a0)
###############################################################################
#
# Cache flush routines
#
###############################################################################
#ifdef CONFIG_MN10300_CACHE_WBACK
mn10300_dcache_flush_inv:
movhu (CHCTR),d0
btst CHCTR_DCEN,d0
beq mn10300_dcache_flush_inv_end
mov L1_CACHE_NENTRIES,d1
clr a1
mn10300_dcache_flush_inv_loop:
mov (DCACHE_PURGE_WAY0(0),a1),d0 # unconditional purge
mov (DCACHE_PURGE_WAY1(0),a1),d0 # unconditional purge
mov (DCACHE_PURGE_WAY2(0),a1),d0 # unconditional purge
mov (DCACHE_PURGE_WAY3(0),a1),d0 # unconditional purge
add L1_CACHE_BYTES,a1
add -1,d1
bne mn10300_dcache_flush_inv_loop
mn10300_dcache_flush_inv_end:
ret [],0
#endif /* CONFIG_MN10300_CACHE_WBACK */
###############################################################################
#
# Data areas
#
###############################################################################
.data
.align 4
param_save_area:
.rept 3
.word 0
.endr
.section .bss
.align 4
decomp_stack:
.space 0x2000