kernel-fxtec-pro1x/arch/powerpc/mm/numa.c
Jon Tollefson 8f64e1f2d1 powerpc: Reserve in bootmem lmb reserved regions that cross NUMA nodes
If there are multiple reserved memory blocks via lmb_reserve() that are
contiguous addresses and on different NUMA nodes we are losing track of which
address ranges to reserve in bootmem on which node.  I discovered this
when I recently got to try 16GB huge pages on a system with more then 2 nodes.

When scanning the device tree in early boot we call lmb_reserve() with
the addresses of the 16G pages that we find so that the memory doesn't
get used for something else.  For example the addresses for the pages
could be 4000000000, 4400000000, 4800000000, 4C00000000, etc - 8 pages,
one on each of eight nodes.  In the lmb after all the pages have been
reserved it will look something like the following:

lmb_dump_all:
    memory.cnt            = 0x2
    memory.size           = 0x3e80000000
    memory.region[0x0].base       = 0x0
                      .size     = 0x1e80000000
    memory.region[0x1].base       = 0x4000000000
                      .size     = 0x2000000000
    reserved.cnt          = 0x5
    reserved.size         = 0x3e80000000
    reserved.region[0x0].base       = 0x0
                      .size     = 0x7b5000
    reserved.region[0x1].base       = 0x2a00000
                      .size     = 0x78c000
    reserved.region[0x2].base       = 0x328c000
                      .size     = 0x43000
    reserved.region[0x3].base       = 0xf4e8000
                      .size     = 0xb18000
    reserved.region[0x4].base       = 0x4000000000
                      .size     = 0x2000000000

The reserved.region[0x4] contains the 16G pages.  In
arch/powerpc/mm/num.c: do_init_bootmem() we loop through each of the
node numbers looking for the reserved regions that belong to the
particular node.  It is not able to identify region 0x4 as being a part
of each of the 8 nodes.  It is assuming that a reserved region is only
on a single node.

This patch takes out the reserved region loop from inside
the loop that goes over each node.  It looks up the active region containing
the start of the reserved region.  If it extends past that active region then
it adjusts the size and gets the next active region containing it.

Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-10 15:55:19 +11:00

1120 lines
27 KiB
C

/*
* pSeries NUMA support
*
* Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/threads.h>
#include <linux/bootmem.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/mmzone.h>
#include <linux/module.h>
#include <linux/nodemask.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
#include <linux/lmb.h>
#include <linux/of.h>
#include <asm/sparsemem.h>
#include <asm/prom.h>
#include <asm/system.h>
#include <asm/smp.h>
static int numa_enabled = 1;
static char *cmdline __initdata;
static int numa_debug;
#define dbg(args...) if (numa_debug) { printk(KERN_INFO args); }
int numa_cpu_lookup_table[NR_CPUS];
cpumask_t numa_cpumask_lookup_table[MAX_NUMNODES];
struct pglist_data *node_data[MAX_NUMNODES];
EXPORT_SYMBOL(numa_cpu_lookup_table);
EXPORT_SYMBOL(numa_cpumask_lookup_table);
EXPORT_SYMBOL(node_data);
static int min_common_depth;
static int n_mem_addr_cells, n_mem_size_cells;
static int __cpuinit fake_numa_create_new_node(unsigned long end_pfn,
unsigned int *nid)
{
unsigned long long mem;
char *p = cmdline;
static unsigned int fake_nid;
static unsigned long long curr_boundary;
/*
* Modify node id, iff we started creating NUMA nodes
* We want to continue from where we left of the last time
*/
if (fake_nid)
*nid = fake_nid;
/*
* In case there are no more arguments to parse, the
* node_id should be the same as the last fake node id
* (we've handled this above).
*/
if (!p)
return 0;
mem = memparse(p, &p);
if (!mem)
return 0;
if (mem < curr_boundary)
return 0;
curr_boundary = mem;
if ((end_pfn << PAGE_SHIFT) > mem) {
/*
* Skip commas and spaces
*/
while (*p == ',' || *p == ' ' || *p == '\t')
p++;
cmdline = p;
fake_nid++;
*nid = fake_nid;
dbg("created new fake_node with id %d\n", fake_nid);
return 1;
}
return 0;
}
/*
* get_active_region_work_fn - A helper function for get_node_active_region
* Returns datax set to the start_pfn and end_pfn if they contain
* the initial value of datax->start_pfn between them
* @start_pfn: start page(inclusive) of region to check
* @end_pfn: end page(exclusive) of region to check
* @datax: comes in with ->start_pfn set to value to search for and
* goes out with active range if it contains it
* Returns 1 if search value is in range else 0
*/
static int __init get_active_region_work_fn(unsigned long start_pfn,
unsigned long end_pfn, void *datax)
{
struct node_active_region *data;
data = (struct node_active_region *)datax;
if (start_pfn <= data->start_pfn && end_pfn > data->start_pfn) {
data->start_pfn = start_pfn;
data->end_pfn = end_pfn;
return 1;
}
return 0;
}
/*
* get_node_active_region - Return active region containing start_pfn
* @start_pfn: The page to return the region for.
* @node_ar: Returned set to the active region containing start_pfn
*/
static void __init get_node_active_region(unsigned long start_pfn,
struct node_active_region *node_ar)
{
int nid = early_pfn_to_nid(start_pfn);
node_ar->nid = nid;
node_ar->start_pfn = start_pfn;
work_with_active_regions(nid, get_active_region_work_fn, node_ar);
}
static void __cpuinit map_cpu_to_node(int cpu, int node)
{
numa_cpu_lookup_table[cpu] = node;
dbg("adding cpu %d to node %d\n", cpu, node);
if (!(cpu_isset(cpu, numa_cpumask_lookup_table[node])))
cpu_set(cpu, numa_cpumask_lookup_table[node]);
}
#ifdef CONFIG_HOTPLUG_CPU
static void unmap_cpu_from_node(unsigned long cpu)
{
int node = numa_cpu_lookup_table[cpu];
dbg("removing cpu %lu from node %d\n", cpu, node);
if (cpu_isset(cpu, numa_cpumask_lookup_table[node])) {
cpu_clear(cpu, numa_cpumask_lookup_table[node]);
} else {
printk(KERN_ERR "WARNING: cpu %lu not found in node %d\n",
cpu, node);
}
}
#endif /* CONFIG_HOTPLUG_CPU */
static struct device_node * __cpuinit find_cpu_node(unsigned int cpu)
{
unsigned int hw_cpuid = get_hard_smp_processor_id(cpu);
struct device_node *cpu_node = NULL;
const unsigned int *interrupt_server, *reg;
int len;
while ((cpu_node = of_find_node_by_type(cpu_node, "cpu")) != NULL) {
/* Try interrupt server first */
interrupt_server = of_get_property(cpu_node,
"ibm,ppc-interrupt-server#s", &len);
len = len / sizeof(u32);
if (interrupt_server && (len > 0)) {
while (len--) {
if (interrupt_server[len] == hw_cpuid)
return cpu_node;
}
} else {
reg = of_get_property(cpu_node, "reg", &len);
if (reg && (len > 0) && (reg[0] == hw_cpuid))
return cpu_node;
}
}
return NULL;
}
/* must hold reference to node during call */
static const int *of_get_associativity(struct device_node *dev)
{
return of_get_property(dev, "ibm,associativity", NULL);
}
/*
* Returns the property linux,drconf-usable-memory if
* it exists (the property exists only in kexec/kdump kernels,
* added by kexec-tools)
*/
static const u32 *of_get_usable_memory(struct device_node *memory)
{
const u32 *prop;
u32 len;
prop = of_get_property(memory, "linux,drconf-usable-memory", &len);
if (!prop || len < sizeof(unsigned int))
return 0;
return prop;
}
/* Returns nid in the range [0..MAX_NUMNODES-1], or -1 if no useful numa
* info is found.
*/
static int of_node_to_nid_single(struct device_node *device)
{
int nid = -1;
const unsigned int *tmp;
if (min_common_depth == -1)
goto out;
tmp = of_get_associativity(device);
if (!tmp)
goto out;
if (tmp[0] >= min_common_depth)
nid = tmp[min_common_depth];
/* POWER4 LPAR uses 0xffff as invalid node */
if (nid == 0xffff || nid >= MAX_NUMNODES)
nid = -1;
out:
return nid;
}
/* Walk the device tree upwards, looking for an associativity id */
int of_node_to_nid(struct device_node *device)
{
struct device_node *tmp;
int nid = -1;
of_node_get(device);
while (device) {
nid = of_node_to_nid_single(device);
if (nid != -1)
break;
tmp = device;
device = of_get_parent(tmp);
of_node_put(tmp);
}
of_node_put(device);
return nid;
}
EXPORT_SYMBOL_GPL(of_node_to_nid);
/*
* In theory, the "ibm,associativity" property may contain multiple
* associativity lists because a resource may be multiply connected
* into the machine. This resource then has different associativity
* characteristics relative to its multiple connections. We ignore
* this for now. We also assume that all cpu and memory sets have
* their distances represented at a common level. This won't be
* true for hierarchical NUMA.
*
* In any case the ibm,associativity-reference-points should give
* the correct depth for a normal NUMA system.
*
* - Dave Hansen <haveblue@us.ibm.com>
*/
static int __init find_min_common_depth(void)
{
int depth;
const unsigned int *ref_points;
struct device_node *rtas_root;
unsigned int len;
rtas_root = of_find_node_by_path("/rtas");
if (!rtas_root)
return -1;
/*
* this property is 2 32-bit integers, each representing a level of
* depth in the associativity nodes. The first is for an SMP
* configuration (should be all 0's) and the second is for a normal
* NUMA configuration.
*/
ref_points = of_get_property(rtas_root,
"ibm,associativity-reference-points", &len);
if ((len >= 1) && ref_points) {
depth = ref_points[1];
} else {
dbg("NUMA: ibm,associativity-reference-points not found.\n");
depth = -1;
}
of_node_put(rtas_root);
return depth;
}
static void __init get_n_mem_cells(int *n_addr_cells, int *n_size_cells)
{
struct device_node *memory = NULL;
memory = of_find_node_by_type(memory, "memory");
if (!memory)
panic("numa.c: No memory nodes found!");
*n_addr_cells = of_n_addr_cells(memory);
*n_size_cells = of_n_size_cells(memory);
of_node_put(memory);
}
static unsigned long __devinit read_n_cells(int n, const unsigned int **buf)
{
unsigned long result = 0;
while (n--) {
result = (result << 32) | **buf;
(*buf)++;
}
return result;
}
struct of_drconf_cell {
u64 base_addr;
u32 drc_index;
u32 reserved;
u32 aa_index;
u32 flags;
};
#define DRCONF_MEM_ASSIGNED 0x00000008
#define DRCONF_MEM_AI_INVALID 0x00000040
#define DRCONF_MEM_RESERVED 0x00000080
/*
* Read the next lmb list entry from the ibm,dynamic-memory property
* and return the information in the provided of_drconf_cell structure.
*/
static void read_drconf_cell(struct of_drconf_cell *drmem, const u32 **cellp)
{
const u32 *cp;
drmem->base_addr = read_n_cells(n_mem_addr_cells, cellp);
cp = *cellp;
drmem->drc_index = cp[0];
drmem->reserved = cp[1];
drmem->aa_index = cp[2];
drmem->flags = cp[3];
*cellp = cp + 4;
}
/*
* Retreive and validate the ibm,dynamic-memory property of the device tree.
*
* The layout of the ibm,dynamic-memory property is a number N of lmb
* list entries followed by N lmb list entries. Each lmb list entry
* contains information as layed out in the of_drconf_cell struct above.
*/
static int of_get_drconf_memory(struct device_node *memory, const u32 **dm)
{
const u32 *prop;
u32 len, entries;
prop = of_get_property(memory, "ibm,dynamic-memory", &len);
if (!prop || len < sizeof(unsigned int))
return 0;
entries = *prop++;
/* Now that we know the number of entries, revalidate the size
* of the property read in to ensure we have everything
*/
if (len < (entries * (n_mem_addr_cells + 4) + 1) * sizeof(unsigned int))
return 0;
*dm = prop;
return entries;
}
/*
* Retreive and validate the ibm,lmb-size property for drconf memory
* from the device tree.
*/
static u64 of_get_lmb_size(struct device_node *memory)
{
const u32 *prop;
u32 len;
prop = of_get_property(memory, "ibm,lmb-size", &len);
if (!prop || len < sizeof(unsigned int))
return 0;
return read_n_cells(n_mem_size_cells, &prop);
}
struct assoc_arrays {
u32 n_arrays;
u32 array_sz;
const u32 *arrays;
};
/*
* Retreive and validate the list of associativity arrays for drconf
* memory from the ibm,associativity-lookup-arrays property of the
* device tree..
*
* The layout of the ibm,associativity-lookup-arrays property is a number N
* indicating the number of associativity arrays, followed by a number M
* indicating the size of each associativity array, followed by a list
* of N associativity arrays.
*/
static int of_get_assoc_arrays(struct device_node *memory,
struct assoc_arrays *aa)
{
const u32 *prop;
u32 len;
prop = of_get_property(memory, "ibm,associativity-lookup-arrays", &len);
if (!prop || len < 2 * sizeof(unsigned int))
return -1;
aa->n_arrays = *prop++;
aa->array_sz = *prop++;
/* Now that we know the number of arrrays and size of each array,
* revalidate the size of the property read in.
*/
if (len < (aa->n_arrays * aa->array_sz + 2) * sizeof(unsigned int))
return -1;
aa->arrays = prop;
return 0;
}
/*
* This is like of_node_to_nid_single() for memory represented in the
* ibm,dynamic-reconfiguration-memory node.
*/
static int of_drconf_to_nid_single(struct of_drconf_cell *drmem,
struct assoc_arrays *aa)
{
int default_nid = 0;
int nid = default_nid;
int index;
if (min_common_depth > 0 && min_common_depth <= aa->array_sz &&
!(drmem->flags & DRCONF_MEM_AI_INVALID) &&
drmem->aa_index < aa->n_arrays) {
index = drmem->aa_index * aa->array_sz + min_common_depth - 1;
nid = aa->arrays[index];
if (nid == 0xffff || nid >= MAX_NUMNODES)
nid = default_nid;
}
return nid;
}
/*
* Figure out to which domain a cpu belongs and stick it there.
* Return the id of the domain used.
*/
static int __cpuinit numa_setup_cpu(unsigned long lcpu)
{
int nid = 0;
struct device_node *cpu = find_cpu_node(lcpu);
if (!cpu) {
WARN_ON(1);
goto out;
}
nid = of_node_to_nid_single(cpu);
if (nid < 0 || !node_online(nid))
nid = any_online_node(NODE_MASK_ALL);
out:
map_cpu_to_node(lcpu, nid);
of_node_put(cpu);
return nid;
}
static int __cpuinit cpu_numa_callback(struct notifier_block *nfb,
unsigned long action,
void *hcpu)
{
unsigned long lcpu = (unsigned long)hcpu;
int ret = NOTIFY_DONE;
switch (action) {
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
numa_setup_cpu(lcpu);
ret = NOTIFY_OK;
break;
#ifdef CONFIG_HOTPLUG_CPU
case CPU_DEAD:
case CPU_DEAD_FROZEN:
case CPU_UP_CANCELED:
case CPU_UP_CANCELED_FROZEN:
unmap_cpu_from_node(lcpu);
break;
ret = NOTIFY_OK;
#endif
}
return ret;
}
/*
* Check and possibly modify a memory region to enforce the memory limit.
*
* Returns the size the region should have to enforce the memory limit.
* This will either be the original value of size, a truncated value,
* or zero. If the returned value of size is 0 the region should be
* discarded as it lies wholy above the memory limit.
*/
static unsigned long __init numa_enforce_memory_limit(unsigned long start,
unsigned long size)
{
/*
* We use lmb_end_of_DRAM() in here instead of memory_limit because
* we've already adjusted it for the limit and it takes care of
* having memory holes below the limit.
*/
if (! memory_limit)
return size;
if (start + size <= lmb_end_of_DRAM())
return size;
if (start >= lmb_end_of_DRAM())
return 0;
return lmb_end_of_DRAM() - start;
}
/*
* Reads the counter for a given entry in
* linux,drconf-usable-memory property
*/
static inline int __init read_usm_ranges(const u32 **usm)
{
/*
* For each lmb in ibm,dynamic-memory a corresponding
* entry in linux,drconf-usable-memory property contains
* a counter followed by that many (base, size) duple.
* read the counter from linux,drconf-usable-memory
*/
return read_n_cells(n_mem_size_cells, usm);
}
/*
* Extract NUMA information from the ibm,dynamic-reconfiguration-memory
* node. This assumes n_mem_{addr,size}_cells have been set.
*/
static void __init parse_drconf_memory(struct device_node *memory)
{
const u32 *dm, *usm;
unsigned int n, rc, ranges, is_kexec_kdump = 0;
unsigned long lmb_size, base, size, sz;
int nid;
struct assoc_arrays aa;
n = of_get_drconf_memory(memory, &dm);
if (!n)
return;
lmb_size = of_get_lmb_size(memory);
if (!lmb_size)
return;
rc = of_get_assoc_arrays(memory, &aa);
if (rc)
return;
/* check if this is a kexec/kdump kernel */
usm = of_get_usable_memory(memory);
if (usm != NULL)
is_kexec_kdump = 1;
for (; n != 0; --n) {
struct of_drconf_cell drmem;
read_drconf_cell(&drmem, &dm);
/* skip this block if the reserved bit is set in flags (0x80)
or if the block is not assigned to this partition (0x8) */
if ((drmem.flags & DRCONF_MEM_RESERVED)
|| !(drmem.flags & DRCONF_MEM_ASSIGNED))
continue;
base = drmem.base_addr;
size = lmb_size;
ranges = 1;
if (is_kexec_kdump) {
ranges = read_usm_ranges(&usm);
if (!ranges) /* there are no (base, size) duple */
continue;
}
do {
if (is_kexec_kdump) {
base = read_n_cells(n_mem_addr_cells, &usm);
size = read_n_cells(n_mem_size_cells, &usm);
}
nid = of_drconf_to_nid_single(&drmem, &aa);
fake_numa_create_new_node(
((base + size) >> PAGE_SHIFT),
&nid);
node_set_online(nid);
sz = numa_enforce_memory_limit(base, size);
if (sz)
add_active_range(nid, base >> PAGE_SHIFT,
(base >> PAGE_SHIFT)
+ (sz >> PAGE_SHIFT));
} while (--ranges);
}
}
static int __init parse_numa_properties(void)
{
struct device_node *cpu = NULL;
struct device_node *memory = NULL;
int default_nid = 0;
unsigned long i;
if (numa_enabled == 0) {
printk(KERN_WARNING "NUMA disabled by user\n");
return -1;
}
min_common_depth = find_min_common_depth();
if (min_common_depth < 0)
return min_common_depth;
dbg("NUMA associativity depth for CPU/Memory: %d\n", min_common_depth);
/*
* Even though we connect cpus to numa domains later in SMP
* init, we need to know the node ids now. This is because
* each node to be onlined must have NODE_DATA etc backing it.
*/
for_each_present_cpu(i) {
int nid;
cpu = find_cpu_node(i);
BUG_ON(!cpu);
nid = of_node_to_nid_single(cpu);
of_node_put(cpu);
/*
* Don't fall back to default_nid yet -- we will plug
* cpus into nodes once the memory scan has discovered
* the topology.
*/
if (nid < 0)
continue;
node_set_online(nid);
}
get_n_mem_cells(&n_mem_addr_cells, &n_mem_size_cells);
memory = NULL;
while ((memory = of_find_node_by_type(memory, "memory")) != NULL) {
unsigned long start;
unsigned long size;
int nid;
int ranges;
const unsigned int *memcell_buf;
unsigned int len;
memcell_buf = of_get_property(memory,
"linux,usable-memory", &len);
if (!memcell_buf || len <= 0)
memcell_buf = of_get_property(memory, "reg", &len);
if (!memcell_buf || len <= 0)
continue;
/* ranges in cell */
ranges = (len >> 2) / (n_mem_addr_cells + n_mem_size_cells);
new_range:
/* these are order-sensitive, and modify the buffer pointer */
start = read_n_cells(n_mem_addr_cells, &memcell_buf);
size = read_n_cells(n_mem_size_cells, &memcell_buf);
/*
* Assumption: either all memory nodes or none will
* have associativity properties. If none, then
* everything goes to default_nid.
*/
nid = of_node_to_nid_single(memory);
if (nid < 0)
nid = default_nid;
fake_numa_create_new_node(((start + size) >> PAGE_SHIFT), &nid);
node_set_online(nid);
if (!(size = numa_enforce_memory_limit(start, size))) {
if (--ranges)
goto new_range;
else
continue;
}
add_active_range(nid, start >> PAGE_SHIFT,
(start >> PAGE_SHIFT) + (size >> PAGE_SHIFT));
if (--ranges)
goto new_range;
}
/*
* Now do the same thing for each LMB listed in the ibm,dynamic-memory
* property in the ibm,dynamic-reconfiguration-memory node.
*/
memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
if (memory)
parse_drconf_memory(memory);
return 0;
}
static void __init setup_nonnuma(void)
{
unsigned long top_of_ram = lmb_end_of_DRAM();
unsigned long total_ram = lmb_phys_mem_size();
unsigned long start_pfn, end_pfn;
unsigned int i, nid = 0;
printk(KERN_DEBUG "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
top_of_ram, total_ram);
printk(KERN_DEBUG "Memory hole size: %ldMB\n",
(top_of_ram - total_ram) >> 20);
for (i = 0; i < lmb.memory.cnt; ++i) {
start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
fake_numa_create_new_node(end_pfn, &nid);
add_active_range(nid, start_pfn, end_pfn);
node_set_online(nid);
}
}
void __init dump_numa_cpu_topology(void)
{
unsigned int node;
unsigned int cpu, count;
if (min_common_depth == -1 || !numa_enabled)
return;
for_each_online_node(node) {
printk(KERN_DEBUG "Node %d CPUs:", node);
count = 0;
/*
* If we used a CPU iterator here we would miss printing
* the holes in the cpumap.
*/
for (cpu = 0; cpu < NR_CPUS; cpu++) {
if (cpu_isset(cpu, numa_cpumask_lookup_table[node])) {
if (count == 0)
printk(" %u", cpu);
++count;
} else {
if (count > 1)
printk("-%u", cpu - 1);
count = 0;
}
}
if (count > 1)
printk("-%u", NR_CPUS - 1);
printk("\n");
}
}
static void __init dump_numa_memory_topology(void)
{
unsigned int node;
unsigned int count;
if (min_common_depth == -1 || !numa_enabled)
return;
for_each_online_node(node) {
unsigned long i;
printk(KERN_DEBUG "Node %d Memory:", node);
count = 0;
for (i = 0; i < lmb_end_of_DRAM();
i += (1 << SECTION_SIZE_BITS)) {
if (early_pfn_to_nid(i >> PAGE_SHIFT) == node) {
if (count == 0)
printk(" 0x%lx", i);
++count;
} else {
if (count > 0)
printk("-0x%lx", i);
count = 0;
}
}
if (count > 0)
printk("-0x%lx", i);
printk("\n");
}
}
/*
* Allocate some memory, satisfying the lmb or bootmem allocator where
* required. nid is the preferred node and end is the physical address of
* the highest address in the node.
*
* Returns the physical address of the memory.
*/
static void __init *careful_allocation(int nid, unsigned long size,
unsigned long align,
unsigned long end_pfn)
{
int new_nid;
unsigned long ret = __lmb_alloc_base(size, align, end_pfn << PAGE_SHIFT);
/* retry over all memory */
if (!ret)
ret = __lmb_alloc_base(size, align, lmb_end_of_DRAM());
if (!ret)
panic("numa.c: cannot allocate %lu bytes on node %d",
size, nid);
/*
* If the memory came from a previously allocated node, we must
* retry with the bootmem allocator.
*/
new_nid = early_pfn_to_nid(ret >> PAGE_SHIFT);
if (new_nid < nid) {
ret = (unsigned long)__alloc_bootmem_node(NODE_DATA(new_nid),
size, align, 0);
if (!ret)
panic("numa.c: cannot allocate %lu bytes on node %d",
size, new_nid);
ret = __pa(ret);
dbg("alloc_bootmem %lx %lx\n", ret, size);
}
return (void *)ret;
}
static struct notifier_block __cpuinitdata ppc64_numa_nb = {
.notifier_call = cpu_numa_callback,
.priority = 1 /* Must run before sched domains notifier. */
};
void __init do_init_bootmem(void)
{
int nid;
unsigned int i;
min_low_pfn = 0;
max_low_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
max_pfn = max_low_pfn;
if (parse_numa_properties())
setup_nonnuma();
else
dump_numa_memory_topology();
register_cpu_notifier(&ppc64_numa_nb);
cpu_numa_callback(&ppc64_numa_nb, CPU_UP_PREPARE,
(void *)(unsigned long)boot_cpuid);
for_each_online_node(nid) {
unsigned long start_pfn, end_pfn;
unsigned long bootmem_paddr;
unsigned long bootmap_pages;
get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
/* Allocate the node structure node local if possible */
NODE_DATA(nid) = careful_allocation(nid,
sizeof(struct pglist_data),
SMP_CACHE_BYTES, end_pfn);
NODE_DATA(nid) = __va(NODE_DATA(nid));
memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
dbg("node %d\n", nid);
dbg("NODE_DATA() = %p\n", NODE_DATA(nid));
NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
NODE_DATA(nid)->node_start_pfn = start_pfn;
NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
if (NODE_DATA(nid)->node_spanned_pages == 0)
continue;
dbg("start_paddr = %lx\n", start_pfn << PAGE_SHIFT);
dbg("end_paddr = %lx\n", end_pfn << PAGE_SHIFT);
bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
bootmem_paddr = (unsigned long)careful_allocation(nid,
bootmap_pages << PAGE_SHIFT,
PAGE_SIZE, end_pfn);
memset(__va(bootmem_paddr), 0, bootmap_pages << PAGE_SHIFT);
dbg("bootmap_paddr = %lx\n", bootmem_paddr);
init_bootmem_node(NODE_DATA(nid), bootmem_paddr >> PAGE_SHIFT,
start_pfn, end_pfn);
free_bootmem_with_active_regions(nid, end_pfn);
}
/* Mark reserved regions */
for (i = 0; i < lmb.reserved.cnt; i++) {
unsigned long physbase = lmb.reserved.region[i].base;
unsigned long size = lmb.reserved.region[i].size;
unsigned long start_pfn = physbase >> PAGE_SHIFT;
unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT);
struct node_active_region node_ar;
get_node_active_region(start_pfn, &node_ar);
while (start_pfn < end_pfn) {
/*
* if reserved region extends past active region
* then trim size to active region
*/
if (end_pfn > node_ar.end_pfn)
size = (node_ar.end_pfn << PAGE_SHIFT)
- (start_pfn << PAGE_SHIFT);
dbg("reserve_bootmem %lx %lx nid=%d\n", physbase, size,
node_ar.nid);
reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase,
size, BOOTMEM_DEFAULT);
/*
* if reserved region is contained in the active region
* then done.
*/
if (end_pfn <= node_ar.end_pfn)
break;
/*
* reserved region extends past the active region
* get next active region that contains this
* reserved region
*/
start_pfn = node_ar.end_pfn;
physbase = start_pfn << PAGE_SHIFT;
get_node_active_region(start_pfn, &node_ar);
}
}
for_each_online_node(nid)
sparse_memory_present_with_active_regions(nid);
}
void __init paging_init(void)
{
unsigned long max_zone_pfns[MAX_NR_ZONES];
memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
max_zone_pfns[ZONE_DMA] = lmb_end_of_DRAM() >> PAGE_SHIFT;
free_area_init_nodes(max_zone_pfns);
}
static int __init early_numa(char *p)
{
if (!p)
return 0;
if (strstr(p, "off"))
numa_enabled = 0;
if (strstr(p, "debug"))
numa_debug = 1;
p = strstr(p, "fake=");
if (p)
cmdline = p + strlen("fake=");
return 0;
}
early_param("numa", early_numa);
#ifdef CONFIG_MEMORY_HOTPLUG
/*
* Validate the node associated with the memory section we are
* trying to add.
*/
int valid_hot_add_scn(int *nid, unsigned long start, u32 lmb_size,
unsigned long scn_addr)
{
nodemask_t nodes;
if (*nid < 0 || !node_online(*nid))
*nid = any_online_node(NODE_MASK_ALL);
if ((scn_addr >= start) && (scn_addr < (start + lmb_size))) {
nodes_setall(nodes);
while (NODE_DATA(*nid)->node_spanned_pages == 0) {
node_clear(*nid, nodes);
*nid = any_online_node(nodes);
}
return 1;
}
return 0;
}
/*
* Find the node associated with a hot added memory section represented
* by the ibm,dynamic-reconfiguration-memory node.
*/
static int hot_add_drconf_scn_to_nid(struct device_node *memory,
unsigned long scn_addr)
{
const u32 *dm;
unsigned int n, rc;
unsigned long lmb_size;
int default_nid = any_online_node(NODE_MASK_ALL);
int nid;
struct assoc_arrays aa;
n = of_get_drconf_memory(memory, &dm);
if (!n)
return default_nid;;
lmb_size = of_get_lmb_size(memory);
if (!lmb_size)
return default_nid;
rc = of_get_assoc_arrays(memory, &aa);
if (rc)
return default_nid;
for (; n != 0; --n) {
struct of_drconf_cell drmem;
read_drconf_cell(&drmem, &dm);
/* skip this block if it is reserved or not assigned to
* this partition */
if ((drmem.flags & DRCONF_MEM_RESERVED)
|| !(drmem.flags & DRCONF_MEM_ASSIGNED))
continue;
nid = of_drconf_to_nid_single(&drmem, &aa);
if (valid_hot_add_scn(&nid, drmem.base_addr, lmb_size,
scn_addr))
return nid;
}
BUG(); /* section address should be found above */
return 0;
}
/*
* Find the node associated with a hot added memory section. Section
* corresponds to a SPARSEMEM section, not an LMB. It is assumed that
* sections are fully contained within a single LMB.
*/
int hot_add_scn_to_nid(unsigned long scn_addr)
{
struct device_node *memory = NULL;
int nid;
if (!numa_enabled || (min_common_depth < 0))
return any_online_node(NODE_MASK_ALL);
memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
if (memory) {
nid = hot_add_drconf_scn_to_nid(memory, scn_addr);
of_node_put(memory);
return nid;
}
while ((memory = of_find_node_by_type(memory, "memory")) != NULL) {
unsigned long start, size;
int ranges;
const unsigned int *memcell_buf;
unsigned int len;
memcell_buf = of_get_property(memory, "reg", &len);
if (!memcell_buf || len <= 0)
continue;
/* ranges in cell */
ranges = (len >> 2) / (n_mem_addr_cells + n_mem_size_cells);
ha_new_range:
start = read_n_cells(n_mem_addr_cells, &memcell_buf);
size = read_n_cells(n_mem_size_cells, &memcell_buf);
nid = of_node_to_nid_single(memory);
if (valid_hot_add_scn(&nid, start, size, scn_addr)) {
of_node_put(memory);
return nid;
}
if (--ranges) /* process all ranges in cell */
goto ha_new_range;
}
BUG(); /* section address should be found above */
return 0;
}
#endif /* CONFIG_MEMORY_HOTPLUG */