1fbb938dff
New NAND controllers can perform read/write via HW engines which don't expose OOB data in their DMA mode. To reflect this, we should rework the nand_chip / nand_ecc_ctrl interfaces that assume that drivers will always read/write OOB data in the nand_chip.oob_poi buffer. A better interface includes a boolean argument that explicitly tells the callee when OOB data is requested by the calling layer (for reading/writing to/from nand_chip.oob_poi). This patch adds the 'oob_required' parameter to each relevant {read,write}_page interface; all 'oob_required' parameters are left unused for now. The next patch will set the parameter properly in the nand_base.c callers, and follow-up patches will make use of 'oob_required' in some of the callee functions. Note that currently, there is no harm in ignoring the 'oob_required' parameter and *always* utilizing nand_chip.oob_poi, but there can be performance/complexity/design benefits from avoiding filling oob_poi in the common case. I will try to implement this for some drivers which can be ported easily. Note: I couldn't compile-test all of these easily, as some had ARCH dependencies. [dwmw2: Merge later 1/0 vs. true/false cleanup] Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Acked-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
217 lines
7.1 KiB
C
217 lines
7.1 KiB
C
/*****************************************************************************
|
|
* Copyright 2004 - 2009 Broadcom Corporation. All rights reserved.
|
|
*
|
|
* Unless you and Broadcom execute a separate written software license
|
|
* agreement governing use of this software, this software is licensed to you
|
|
* under the terms of the GNU General Public License version 2, available at
|
|
* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
|
|
*
|
|
* Notwithstanding the above, under no circumstances may you combine this
|
|
* software in any way with any other Broadcom software provided under a
|
|
* license other than the GPL, without Broadcom's express prior written
|
|
* consent.
|
|
*****************************************************************************/
|
|
|
|
/* ---- Include Files ---------------------------------------------------- */
|
|
#include "nand_bcm_umi.h"
|
|
|
|
/* ---- External Variable Declarations ----------------------------------- */
|
|
/* ---- External Function Prototypes ------------------------------------- */
|
|
/* ---- Public Variables ------------------------------------------------- */
|
|
/* ---- Private Constants and Types -------------------------------------- */
|
|
|
|
/* ---- Private Function Prototypes -------------------------------------- */
|
|
static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd,
|
|
struct nand_chip *chip, uint8_t *buf, int oob_required, int page);
|
|
static void bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd,
|
|
struct nand_chip *chip, const uint8_t *buf, int oob_required);
|
|
|
|
/* ---- Private Variables ------------------------------------------------ */
|
|
|
|
/*
|
|
** nand_hw_eccoob
|
|
** New oob placement block for use with hardware ecc generation.
|
|
*/
|
|
static struct nand_ecclayout nand_hw_eccoob_512 = {
|
|
/* Reserve 5 for BI indicator */
|
|
.oobfree = {
|
|
#if (NAND_ECC_NUM_BYTES > 3)
|
|
{.offset = 0, .length = 2}
|
|
#else
|
|
{.offset = 0, .length = 5},
|
|
{.offset = 6, .length = 7}
|
|
#endif
|
|
}
|
|
};
|
|
|
|
/*
|
|
** We treat the OOB for a 2K page as if it were 4 512 byte oobs,
|
|
** except the BI is at byte 0.
|
|
*/
|
|
static struct nand_ecclayout nand_hw_eccoob_2048 = {
|
|
/* Reserve 0 as BI indicator */
|
|
.oobfree = {
|
|
#if (NAND_ECC_NUM_BYTES > 10)
|
|
{.offset = 1, .length = 2},
|
|
#elif (NAND_ECC_NUM_BYTES > 7)
|
|
{.offset = 1, .length = 5},
|
|
{.offset = 16, .length = 6},
|
|
{.offset = 32, .length = 6},
|
|
{.offset = 48, .length = 6}
|
|
#else
|
|
{.offset = 1, .length = 8},
|
|
{.offset = 16, .length = 9},
|
|
{.offset = 32, .length = 9},
|
|
{.offset = 48, .length = 9}
|
|
#endif
|
|
}
|
|
};
|
|
|
|
/* We treat the OOB for a 4K page as if it were 8 512 byte oobs,
|
|
* except the BI is at byte 0. */
|
|
static struct nand_ecclayout nand_hw_eccoob_4096 = {
|
|
/* Reserve 0 as BI indicator */
|
|
.oobfree = {
|
|
#if (NAND_ECC_NUM_BYTES > 10)
|
|
{.offset = 1, .length = 2},
|
|
{.offset = 16, .length = 3},
|
|
{.offset = 32, .length = 3},
|
|
{.offset = 48, .length = 3},
|
|
{.offset = 64, .length = 3},
|
|
{.offset = 80, .length = 3},
|
|
{.offset = 96, .length = 3},
|
|
{.offset = 112, .length = 3}
|
|
#else
|
|
{.offset = 1, .length = 5},
|
|
{.offset = 16, .length = 6},
|
|
{.offset = 32, .length = 6},
|
|
{.offset = 48, .length = 6},
|
|
{.offset = 64, .length = 6},
|
|
{.offset = 80, .length = 6},
|
|
{.offset = 96, .length = 6},
|
|
{.offset = 112, .length = 6}
|
|
#endif
|
|
}
|
|
};
|
|
|
|
/* ---- Private Functions ------------------------------------------------ */
|
|
/* ==== Public Functions ================================================= */
|
|
|
|
/****************************************************************************
|
|
*
|
|
* bcm_umi_bch_read_page_hwecc - hardware ecc based page read function
|
|
* @mtd: mtd info structure
|
|
* @chip: nand chip info structure
|
|
* @buf: buffer to store read data
|
|
* @oob_required: caller expects OOB data read to chip->oob_poi
|
|
*
|
|
***************************************************************************/
|
|
static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd,
|
|
struct nand_chip *chip, uint8_t * buf,
|
|
int oob_required, int page)
|
|
{
|
|
int sectorIdx = 0;
|
|
int eccsize = chip->ecc.size;
|
|
int eccsteps = chip->ecc.steps;
|
|
uint8_t *datap = buf;
|
|
uint8_t eccCalc[NAND_ECC_NUM_BYTES];
|
|
int sectorOobSize = mtd->oobsize / eccsteps;
|
|
int stat;
|
|
unsigned int max_bitflips = 0;
|
|
|
|
for (sectorIdx = 0; sectorIdx < eccsteps;
|
|
sectorIdx++, datap += eccsize) {
|
|
if (sectorIdx > 0) {
|
|
/* Seek to page location within sector */
|
|
chip->cmdfunc(mtd, NAND_CMD_RNDOUT, sectorIdx * eccsize,
|
|
-1);
|
|
}
|
|
|
|
/* Enable hardware ECC before reading the buf */
|
|
nand_bcm_umi_bch_enable_read_hwecc();
|
|
|
|
/* Read in data */
|
|
bcm_umi_nand_read_buf(mtd, datap, eccsize);
|
|
|
|
/* Pause hardware ECC after reading the buf */
|
|
nand_bcm_umi_bch_pause_read_ecc_calc();
|
|
|
|
/* Read the OOB ECC */
|
|
chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
|
|
mtd->writesize + sectorIdx * sectorOobSize, -1);
|
|
nand_bcm_umi_bch_read_oobEcc(mtd->writesize, eccCalc,
|
|
NAND_ECC_NUM_BYTES,
|
|
chip->oob_poi +
|
|
sectorIdx * sectorOobSize);
|
|
|
|
/* Correct any ECC detected errors */
|
|
stat =
|
|
nand_bcm_umi_bch_correct_page(datap, eccCalc,
|
|
NAND_ECC_NUM_BYTES);
|
|
|
|
/* Update Stats */
|
|
if (stat < 0) {
|
|
#if defined(NAND_BCM_UMI_DEBUG)
|
|
printk(KERN_WARNING "%s uncorr_err sectorIdx=%d\n",
|
|
__func__, sectorIdx);
|
|
printk(KERN_WARNING
|
|
"%s data %02x %02x %02x %02x "
|
|
"%02x %02x %02x %02x\n",
|
|
__func__, datap[0], datap[1], datap[2], datap[3],
|
|
datap[4], datap[5], datap[6], datap[7]);
|
|
printk(KERN_WARNING
|
|
"%s ecc %02x %02x %02x %02x "
|
|
"%02x %02x %02x %02x %02x %02x "
|
|
"%02x %02x %02x\n",
|
|
__func__, eccCalc[0], eccCalc[1], eccCalc[2],
|
|
eccCalc[3], eccCalc[4], eccCalc[5], eccCalc[6],
|
|
eccCalc[7], eccCalc[8], eccCalc[9], eccCalc[10],
|
|
eccCalc[11], eccCalc[12]);
|
|
BUG();
|
|
#endif
|
|
mtd->ecc_stats.failed++;
|
|
} else {
|
|
#if defined(NAND_BCM_UMI_DEBUG)
|
|
if (stat > 0) {
|
|
printk(KERN_INFO
|
|
"%s %d correctable_errors detected\n",
|
|
__func__, stat);
|
|
}
|
|
#endif
|
|
mtd->ecc_stats.corrected += stat;
|
|
max_bitflips = max_t(unsigned int, max_bitflips, stat);
|
|
}
|
|
}
|
|
return max_bitflips;
|
|
}
|
|
|
|
/****************************************************************************
|
|
*
|
|
* bcm_umi_bch_write_page_hwecc - hardware ecc based page write function
|
|
* @mtd: mtd info structure
|
|
* @chip: nand chip info structure
|
|
* @buf: data buffer
|
|
* @oob_required: must write chip->oob_poi to OOB
|
|
*
|
|
***************************************************************************/
|
|
static void bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd,
|
|
struct nand_chip *chip, const uint8_t *buf, int oob_required)
|
|
{
|
|
int sectorIdx = 0;
|
|
int eccsize = chip->ecc.size;
|
|
int eccsteps = chip->ecc.steps;
|
|
const uint8_t *datap = buf;
|
|
uint8_t *oobp = chip->oob_poi;
|
|
int sectorOobSize = mtd->oobsize / eccsteps;
|
|
|
|
for (sectorIdx = 0; sectorIdx < eccsteps;
|
|
sectorIdx++, datap += eccsize, oobp += sectorOobSize) {
|
|
/* Enable hardware ECC before writing the buf */
|
|
nand_bcm_umi_bch_enable_write_hwecc();
|
|
bcm_umi_nand_write_buf(mtd, datap, eccsize);
|
|
nand_bcm_umi_bch_write_oobEcc(mtd->writesize, oobp,
|
|
NAND_ECC_NUM_BYTES);
|
|
}
|
|
|
|
bcm_umi_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize);
|
|
}
|