a6e293eef2
Add suspend, resume and rail_off_ready API into tegra_cpu_car_ops. These functions were used for CPU powered-down state maintenance. One thing needs to notice the rail_off_ready API only availalbe for cpu_g cluster not cpu_lp cluster. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2508 lines
64 KiB
C
2508 lines
64 KiB
C
/*
|
|
* arch/arm/mach-tegra/tegra30_clocks.c
|
|
*
|
|
* Copyright (c) 2010-2012 NVIDIA CORPORATION. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/list.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/syscore_ops.h>
|
|
|
|
#include <asm/clkdev.h>
|
|
|
|
#include <mach/powergate.h>
|
|
|
|
#include "clock.h"
|
|
#include "fuse.h"
|
|
#include "iomap.h"
|
|
#include "tegra_cpu_car.h"
|
|
|
|
#define USE_PLL_LOCK_BITS 0
|
|
|
|
#define RST_DEVICES_L 0x004
|
|
#define RST_DEVICES_H 0x008
|
|
#define RST_DEVICES_U 0x00C
|
|
#define RST_DEVICES_V 0x358
|
|
#define RST_DEVICES_W 0x35C
|
|
#define RST_DEVICES_SET_L 0x300
|
|
#define RST_DEVICES_CLR_L 0x304
|
|
#define RST_DEVICES_SET_V 0x430
|
|
#define RST_DEVICES_CLR_V 0x434
|
|
#define RST_DEVICES_NUM 5
|
|
|
|
#define CLK_OUT_ENB_L 0x010
|
|
#define CLK_OUT_ENB_H 0x014
|
|
#define CLK_OUT_ENB_U 0x018
|
|
#define CLK_OUT_ENB_V 0x360
|
|
#define CLK_OUT_ENB_W 0x364
|
|
#define CLK_OUT_ENB_SET_L 0x320
|
|
#define CLK_OUT_ENB_CLR_L 0x324
|
|
#define CLK_OUT_ENB_SET_V 0x440
|
|
#define CLK_OUT_ENB_CLR_V 0x444
|
|
#define CLK_OUT_ENB_NUM 5
|
|
|
|
#define RST_DEVICES_V_SWR_CPULP_RST_DIS (0x1 << 1)
|
|
#define CLK_OUT_ENB_V_CLK_ENB_CPULP_EN (0x1 << 1)
|
|
|
|
#define PERIPH_CLK_TO_BIT(c) (1 << (c->u.periph.clk_num % 32))
|
|
#define PERIPH_CLK_TO_RST_REG(c) \
|
|
periph_clk_to_reg((c), RST_DEVICES_L, RST_DEVICES_V, 4)
|
|
#define PERIPH_CLK_TO_RST_SET_REG(c) \
|
|
periph_clk_to_reg((c), RST_DEVICES_SET_L, RST_DEVICES_SET_V, 8)
|
|
#define PERIPH_CLK_TO_RST_CLR_REG(c) \
|
|
periph_clk_to_reg((c), RST_DEVICES_CLR_L, RST_DEVICES_CLR_V, 8)
|
|
|
|
#define PERIPH_CLK_TO_ENB_REG(c) \
|
|
periph_clk_to_reg((c), CLK_OUT_ENB_L, CLK_OUT_ENB_V, 4)
|
|
#define PERIPH_CLK_TO_ENB_SET_REG(c) \
|
|
periph_clk_to_reg((c), CLK_OUT_ENB_SET_L, CLK_OUT_ENB_SET_V, 8)
|
|
#define PERIPH_CLK_TO_ENB_CLR_REG(c) \
|
|
periph_clk_to_reg((c), CLK_OUT_ENB_CLR_L, CLK_OUT_ENB_CLR_V, 8)
|
|
|
|
#define CLK_MASK_ARM 0x44
|
|
#define MISC_CLK_ENB 0x48
|
|
|
|
#define OSC_CTRL 0x50
|
|
#define OSC_CTRL_OSC_FREQ_MASK (0xF<<28)
|
|
#define OSC_CTRL_OSC_FREQ_13MHZ (0x0<<28)
|
|
#define OSC_CTRL_OSC_FREQ_19_2MHZ (0x4<<28)
|
|
#define OSC_CTRL_OSC_FREQ_12MHZ (0x8<<28)
|
|
#define OSC_CTRL_OSC_FREQ_26MHZ (0xC<<28)
|
|
#define OSC_CTRL_OSC_FREQ_16_8MHZ (0x1<<28)
|
|
#define OSC_CTRL_OSC_FREQ_38_4MHZ (0x5<<28)
|
|
#define OSC_CTRL_OSC_FREQ_48MHZ (0x9<<28)
|
|
#define OSC_CTRL_MASK (0x3f2 | OSC_CTRL_OSC_FREQ_MASK)
|
|
|
|
#define OSC_CTRL_PLL_REF_DIV_MASK (3<<26)
|
|
#define OSC_CTRL_PLL_REF_DIV_1 (0<<26)
|
|
#define OSC_CTRL_PLL_REF_DIV_2 (1<<26)
|
|
#define OSC_CTRL_PLL_REF_DIV_4 (2<<26)
|
|
|
|
#define OSC_FREQ_DET 0x58
|
|
#define OSC_FREQ_DET_TRIG (1<<31)
|
|
|
|
#define OSC_FREQ_DET_STATUS 0x5C
|
|
#define OSC_FREQ_DET_BUSY (1<<31)
|
|
#define OSC_FREQ_DET_CNT_MASK 0xFFFF
|
|
|
|
#define PERIPH_CLK_SOURCE_I2S1 0x100
|
|
#define PERIPH_CLK_SOURCE_EMC 0x19c
|
|
#define PERIPH_CLK_SOURCE_OSC 0x1fc
|
|
#define PERIPH_CLK_SOURCE_NUM1 \
|
|
((PERIPH_CLK_SOURCE_OSC - PERIPH_CLK_SOURCE_I2S1) / 4)
|
|
|
|
#define PERIPH_CLK_SOURCE_G3D2 0x3b0
|
|
#define PERIPH_CLK_SOURCE_SE 0x42c
|
|
#define PERIPH_CLK_SOURCE_NUM2 \
|
|
((PERIPH_CLK_SOURCE_SE - PERIPH_CLK_SOURCE_G3D2) / 4 + 1)
|
|
|
|
#define AUDIO_DLY_CLK 0x49c
|
|
#define AUDIO_SYNC_CLK_SPDIF 0x4b4
|
|
#define PERIPH_CLK_SOURCE_NUM3 \
|
|
((AUDIO_SYNC_CLK_SPDIF - AUDIO_DLY_CLK) / 4 + 1)
|
|
|
|
#define PERIPH_CLK_SOURCE_NUM (PERIPH_CLK_SOURCE_NUM1 + \
|
|
PERIPH_CLK_SOURCE_NUM2 + \
|
|
PERIPH_CLK_SOURCE_NUM3)
|
|
|
|
#define CPU_SOFTRST_CTRL 0x380
|
|
|
|
#define PERIPH_CLK_SOURCE_DIVU71_MASK 0xFF
|
|
#define PERIPH_CLK_SOURCE_DIVU16_MASK 0xFFFF
|
|
#define PERIPH_CLK_SOURCE_DIV_SHIFT 0
|
|
#define PERIPH_CLK_SOURCE_DIVIDLE_SHIFT 8
|
|
#define PERIPH_CLK_SOURCE_DIVIDLE_VAL 50
|
|
#define PERIPH_CLK_UART_DIV_ENB (1<<24)
|
|
#define PERIPH_CLK_VI_SEL_EX_SHIFT 24
|
|
#define PERIPH_CLK_VI_SEL_EX_MASK (0x3<<PERIPH_CLK_VI_SEL_EX_SHIFT)
|
|
#define PERIPH_CLK_NAND_DIV_EX_ENB (1<<8)
|
|
#define PERIPH_CLK_DTV_POLARITY_INV (1<<25)
|
|
|
|
#define AUDIO_SYNC_SOURCE_MASK 0x0F
|
|
#define AUDIO_SYNC_DISABLE_BIT 0x10
|
|
#define AUDIO_SYNC_TAP_NIBBLE_SHIFT(c) ((c->reg_shift - 24) * 4)
|
|
|
|
#define PLL_BASE 0x0
|
|
#define PLL_BASE_BYPASS (1<<31)
|
|
#define PLL_BASE_ENABLE (1<<30)
|
|
#define PLL_BASE_REF_ENABLE (1<<29)
|
|
#define PLL_BASE_OVERRIDE (1<<28)
|
|
#define PLL_BASE_LOCK (1<<27)
|
|
#define PLL_BASE_DIVP_MASK (0x7<<20)
|
|
#define PLL_BASE_DIVP_SHIFT 20
|
|
#define PLL_BASE_DIVN_MASK (0x3FF<<8)
|
|
#define PLL_BASE_DIVN_SHIFT 8
|
|
#define PLL_BASE_DIVM_MASK (0x1F)
|
|
#define PLL_BASE_DIVM_SHIFT 0
|
|
|
|
#define PLL_OUT_RATIO_MASK (0xFF<<8)
|
|
#define PLL_OUT_RATIO_SHIFT 8
|
|
#define PLL_OUT_OVERRIDE (1<<2)
|
|
#define PLL_OUT_CLKEN (1<<1)
|
|
#define PLL_OUT_RESET_DISABLE (1<<0)
|
|
|
|
#define PLL_MISC(c) \
|
|
(((c)->flags & PLL_ALT_MISC_REG) ? 0x4 : 0xc)
|
|
#define PLL_MISC_LOCK_ENABLE(c) \
|
|
(((c)->flags & (PLLU | PLLD)) ? (1<<22) : (1<<18))
|
|
|
|
#define PLL_MISC_DCCON_SHIFT 20
|
|
#define PLL_MISC_CPCON_SHIFT 8
|
|
#define PLL_MISC_CPCON_MASK (0xF<<PLL_MISC_CPCON_SHIFT)
|
|
#define PLL_MISC_LFCON_SHIFT 4
|
|
#define PLL_MISC_LFCON_MASK (0xF<<PLL_MISC_LFCON_SHIFT)
|
|
#define PLL_MISC_VCOCON_SHIFT 0
|
|
#define PLL_MISC_VCOCON_MASK (0xF<<PLL_MISC_VCOCON_SHIFT)
|
|
#define PLLD_MISC_CLKENABLE (1<<30)
|
|
|
|
#define PLLU_BASE_POST_DIV (1<<20)
|
|
|
|
#define PLLD_BASE_DSIB_MUX_SHIFT 25
|
|
#define PLLD_BASE_DSIB_MUX_MASK (1<<PLLD_BASE_DSIB_MUX_SHIFT)
|
|
#define PLLD_BASE_CSI_CLKENABLE (1<<26)
|
|
#define PLLD_MISC_DSI_CLKENABLE (1<<30)
|
|
#define PLLD_MISC_DIV_RST (1<<23)
|
|
#define PLLD_MISC_DCCON_SHIFT 12
|
|
|
|
#define PLLDU_LFCON_SET_DIVN 600
|
|
|
|
/* FIXME: OUT_OF_TABLE_CPCON per pll */
|
|
#define OUT_OF_TABLE_CPCON 0x8
|
|
|
|
#define SUPER_CLK_MUX 0x00
|
|
#define SUPER_STATE_SHIFT 28
|
|
#define SUPER_STATE_MASK (0xF << SUPER_STATE_SHIFT)
|
|
#define SUPER_STATE_STANDBY (0x0 << SUPER_STATE_SHIFT)
|
|
#define SUPER_STATE_IDLE (0x1 << SUPER_STATE_SHIFT)
|
|
#define SUPER_STATE_RUN (0x2 << SUPER_STATE_SHIFT)
|
|
#define SUPER_STATE_IRQ (0x3 << SUPER_STATE_SHIFT)
|
|
#define SUPER_STATE_FIQ (0x4 << SUPER_STATE_SHIFT)
|
|
#define SUPER_LP_DIV2_BYPASS (0x1 << 16)
|
|
#define SUPER_SOURCE_MASK 0xF
|
|
#define SUPER_FIQ_SOURCE_SHIFT 12
|
|
#define SUPER_IRQ_SOURCE_SHIFT 8
|
|
#define SUPER_RUN_SOURCE_SHIFT 4
|
|
#define SUPER_IDLE_SOURCE_SHIFT 0
|
|
|
|
#define SUPER_CLK_DIVIDER 0x04
|
|
#define SUPER_CLOCK_DIV_U71_SHIFT 16
|
|
#define SUPER_CLOCK_DIV_U71_MASK (0xff << SUPER_CLOCK_DIV_U71_SHIFT)
|
|
/* guarantees safe cpu backup */
|
|
#define SUPER_CLOCK_DIV_U71_MIN 0x2
|
|
|
|
#define BUS_CLK_DISABLE (1<<3)
|
|
#define BUS_CLK_DIV_MASK 0x3
|
|
|
|
#define PMC_CTRL 0x0
|
|
#define PMC_CTRL_BLINK_ENB (1 << 7)
|
|
|
|
#define PMC_DPD_PADS_ORIDE 0x1c
|
|
#define PMC_DPD_PADS_ORIDE_BLINK_ENB (1 << 20)
|
|
|
|
#define PMC_BLINK_TIMER_DATA_ON_SHIFT 0
|
|
#define PMC_BLINK_TIMER_DATA_ON_MASK 0x7fff
|
|
#define PMC_BLINK_TIMER_ENB (1 << 15)
|
|
#define PMC_BLINK_TIMER_DATA_OFF_SHIFT 16
|
|
#define PMC_BLINK_TIMER_DATA_OFF_MASK 0xffff
|
|
|
|
#define PMC_PLLP_WB0_OVERRIDE 0xf8
|
|
#define PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE (1 << 12)
|
|
|
|
#define UTMIP_PLL_CFG2 0x488
|
|
#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xfff) << 6)
|
|
#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
|
|
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN (1 << 0)
|
|
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN (1 << 2)
|
|
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN (1 << 4)
|
|
|
|
#define UTMIP_PLL_CFG1 0x484
|
|
#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27)
|
|
#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
|
|
#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN (1 << 14)
|
|
#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN (1 << 12)
|
|
#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN (1 << 16)
|
|
|
|
#define PLLE_BASE_CML_ENABLE (1<<31)
|
|
#define PLLE_BASE_ENABLE (1<<30)
|
|
#define PLLE_BASE_DIVCML_SHIFT 24
|
|
#define PLLE_BASE_DIVCML_MASK (0xf<<PLLE_BASE_DIVCML_SHIFT)
|
|
#define PLLE_BASE_DIVP_SHIFT 16
|
|
#define PLLE_BASE_DIVP_MASK (0x3f<<PLLE_BASE_DIVP_SHIFT)
|
|
#define PLLE_BASE_DIVN_SHIFT 8
|
|
#define PLLE_BASE_DIVN_MASK (0xFF<<PLLE_BASE_DIVN_SHIFT)
|
|
#define PLLE_BASE_DIVM_SHIFT 0
|
|
#define PLLE_BASE_DIVM_MASK (0xFF<<PLLE_BASE_DIVM_SHIFT)
|
|
#define PLLE_BASE_DIV_MASK \
|
|
(PLLE_BASE_DIVCML_MASK | PLLE_BASE_DIVP_MASK | \
|
|
PLLE_BASE_DIVN_MASK | PLLE_BASE_DIVM_MASK)
|
|
#define PLLE_BASE_DIV(m, n, p, cml) \
|
|
(((cml)<<PLLE_BASE_DIVCML_SHIFT) | ((p)<<PLLE_BASE_DIVP_SHIFT) | \
|
|
((n)<<PLLE_BASE_DIVN_SHIFT) | ((m)<<PLLE_BASE_DIVM_SHIFT))
|
|
|
|
#define PLLE_MISC_SETUP_BASE_SHIFT 16
|
|
#define PLLE_MISC_SETUP_BASE_MASK (0xFFFF<<PLLE_MISC_SETUP_BASE_SHIFT)
|
|
#define PLLE_MISC_READY (1<<15)
|
|
#define PLLE_MISC_LOCK (1<<11)
|
|
#define PLLE_MISC_LOCK_ENABLE (1<<9)
|
|
#define PLLE_MISC_SETUP_EX_SHIFT 2
|
|
#define PLLE_MISC_SETUP_EX_MASK (0x3<<PLLE_MISC_SETUP_EX_SHIFT)
|
|
#define PLLE_MISC_SETUP_MASK \
|
|
(PLLE_MISC_SETUP_BASE_MASK | PLLE_MISC_SETUP_EX_MASK)
|
|
#define PLLE_MISC_SETUP_VALUE \
|
|
((0x7<<PLLE_MISC_SETUP_BASE_SHIFT) | (0x0<<PLLE_MISC_SETUP_EX_SHIFT))
|
|
|
|
#define PLLE_SS_CTRL 0x68
|
|
#define PLLE_SS_INCINTRV_SHIFT 24
|
|
#define PLLE_SS_INCINTRV_MASK (0x3f<<PLLE_SS_INCINTRV_SHIFT)
|
|
#define PLLE_SS_INC_SHIFT 16
|
|
#define PLLE_SS_INC_MASK (0xff<<PLLE_SS_INC_SHIFT)
|
|
#define PLLE_SS_MAX_SHIFT 0
|
|
#define PLLE_SS_MAX_MASK (0x1ff<<PLLE_SS_MAX_SHIFT)
|
|
#define PLLE_SS_COEFFICIENTS_MASK \
|
|
(PLLE_SS_INCINTRV_MASK | PLLE_SS_INC_MASK | PLLE_SS_MAX_MASK)
|
|
#define PLLE_SS_COEFFICIENTS_12MHZ \
|
|
((0x18<<PLLE_SS_INCINTRV_SHIFT) | (0x1<<PLLE_SS_INC_SHIFT) | \
|
|
(0x24<<PLLE_SS_MAX_SHIFT))
|
|
#define PLLE_SS_DISABLE ((1<<12) | (1<<11) | (1<<10))
|
|
|
|
#define PLLE_AUX 0x48c
|
|
#define PLLE_AUX_PLLP_SEL (1<<2)
|
|
#define PLLE_AUX_CML_SATA_ENABLE (1<<1)
|
|
#define PLLE_AUX_CML_PCIE_ENABLE (1<<0)
|
|
|
|
#define PMC_SATA_PWRGT 0x1ac
|
|
#define PMC_SATA_PWRGT_PLLE_IDDQ_VALUE (1<<5)
|
|
#define PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL (1<<4)
|
|
|
|
#define ROUND_DIVIDER_UP 0
|
|
#define ROUND_DIVIDER_DOWN 1
|
|
|
|
/* FIXME: recommended safety delay after lock is detected */
|
|
#define PLL_POST_LOCK_DELAY 100
|
|
|
|
/* Tegra CPU clock and reset control regs */
|
|
#define TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX 0x4c
|
|
#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET 0x340
|
|
#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR 0x344
|
|
#define TEGRA30_CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR 0x34c
|
|
#define TEGRA30_CLK_RST_CONTROLLER_CPU_CMPLX_STATUS 0x470
|
|
|
|
#define CPU_CLOCK(cpu) (0x1 << (8 + cpu))
|
|
#define CPU_RESET(cpu) (0x1111ul << (cpu))
|
|
|
|
#define CLK_RESET_CCLK_BURST 0x20
|
|
#define CLK_RESET_CCLK_DIVIDER 0x24
|
|
#define CLK_RESET_PLLX_BASE 0xe0
|
|
#define CLK_RESET_PLLX_MISC 0xe4
|
|
|
|
#define CLK_RESET_SOURCE_CSITE 0x1d4
|
|
|
|
#define CLK_RESET_CCLK_BURST_POLICY_SHIFT 28
|
|
#define CLK_RESET_CCLK_RUN_POLICY_SHIFT 4
|
|
#define CLK_RESET_CCLK_IDLE_POLICY_SHIFT 0
|
|
#define CLK_RESET_CCLK_IDLE_POLICY 1
|
|
#define CLK_RESET_CCLK_RUN_POLICY 2
|
|
#define CLK_RESET_CCLK_BURST_POLICY_PLLX 8
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static struct cpu_clk_suspend_context {
|
|
u32 pllx_misc;
|
|
u32 pllx_base;
|
|
|
|
u32 cpu_burst;
|
|
u32 clk_csite_src;
|
|
u32 cclk_divider;
|
|
} tegra30_cpu_clk_sctx;
|
|
#endif
|
|
|
|
/**
|
|
* Structure defining the fields for USB UTMI clocks Parameters.
|
|
*/
|
|
struct utmi_clk_param {
|
|
/* Oscillator Frequency in KHz */
|
|
u32 osc_frequency;
|
|
/* UTMIP PLL Enable Delay Count */
|
|
u8 enable_delay_count;
|
|
/* UTMIP PLL Stable count */
|
|
u8 stable_count;
|
|
/* UTMIP PLL Active delay count */
|
|
u8 active_delay_count;
|
|
/* UTMIP PLL Xtal frequency count */
|
|
u8 xtal_freq_count;
|
|
};
|
|
|
|
static const struct utmi_clk_param utmi_parameters[] = {
|
|
{
|
|
.osc_frequency = 13000000,
|
|
.enable_delay_count = 0x02,
|
|
.stable_count = 0x33,
|
|
.active_delay_count = 0x05,
|
|
.xtal_freq_count = 0x7F
|
|
},
|
|
{
|
|
.osc_frequency = 19200000,
|
|
.enable_delay_count = 0x03,
|
|
.stable_count = 0x4B,
|
|
.active_delay_count = 0x06,
|
|
.xtal_freq_count = 0xBB},
|
|
{
|
|
.osc_frequency = 12000000,
|
|
.enable_delay_count = 0x02,
|
|
.stable_count = 0x2F,
|
|
.active_delay_count = 0x04,
|
|
.xtal_freq_count = 0x76
|
|
},
|
|
{
|
|
.osc_frequency = 26000000,
|
|
.enable_delay_count = 0x04,
|
|
.stable_count = 0x66,
|
|
.active_delay_count = 0x09,
|
|
.xtal_freq_count = 0xFE
|
|
},
|
|
{
|
|
.osc_frequency = 16800000,
|
|
.enable_delay_count = 0x03,
|
|
.stable_count = 0x41,
|
|
.active_delay_count = 0x0A,
|
|
.xtal_freq_count = 0xA4
|
|
},
|
|
};
|
|
|
|
static void __iomem *reg_clk_base = IO_ADDRESS(TEGRA_CLK_RESET_BASE);
|
|
static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
|
|
static void __iomem *misc_gp_hidrev_base = IO_ADDRESS(TEGRA_APB_MISC_BASE);
|
|
|
|
#define MISC_GP_HIDREV 0x804
|
|
|
|
/*
|
|
* Some peripheral clocks share an enable bit, so refcount the enable bits
|
|
* in registers CLK_ENABLE_L, ... CLK_ENABLE_W
|
|
*/
|
|
static int tegra_periph_clk_enable_refcount[CLK_OUT_ENB_NUM * 32];
|
|
|
|
#define clk_writel(value, reg) \
|
|
__raw_writel(value, reg_clk_base + (reg))
|
|
#define clk_readl(reg) \
|
|
__raw_readl(reg_clk_base + (reg))
|
|
#define pmc_writel(value, reg) \
|
|
__raw_writel(value, reg_pmc_base + (reg))
|
|
#define pmc_readl(reg) \
|
|
__raw_readl(reg_pmc_base + (reg))
|
|
#define chipid_readl() \
|
|
__raw_readl(misc_gp_hidrev_base + MISC_GP_HIDREV)
|
|
|
|
#define clk_writel_delay(value, reg) \
|
|
do { \
|
|
__raw_writel((value), reg_clk_base + (reg)); \
|
|
udelay(2); \
|
|
} while (0)
|
|
|
|
static inline int clk_set_div(struct clk_tegra *c, u32 n)
|
|
{
|
|
struct clk *clk = c->hw.clk;
|
|
|
|
return clk_set_rate(clk,
|
|
(__clk_get_rate(__clk_get_parent(clk)) + n - 1) / n);
|
|
}
|
|
|
|
static inline u32 periph_clk_to_reg(
|
|
struct clk_tegra *c, u32 reg_L, u32 reg_V, int offs)
|
|
{
|
|
u32 reg = c->u.periph.clk_num / 32;
|
|
BUG_ON(reg >= RST_DEVICES_NUM);
|
|
if (reg < 3)
|
|
reg = reg_L + (reg * offs);
|
|
else
|
|
reg = reg_V + ((reg - 3) * offs);
|
|
return reg;
|
|
}
|
|
|
|
static unsigned long clk_measure_input_freq(void)
|
|
{
|
|
u32 clock_autodetect;
|
|
clk_writel(OSC_FREQ_DET_TRIG | 1, OSC_FREQ_DET);
|
|
do {} while (clk_readl(OSC_FREQ_DET_STATUS) & OSC_FREQ_DET_BUSY);
|
|
clock_autodetect = clk_readl(OSC_FREQ_DET_STATUS);
|
|
if (clock_autodetect >= 732 - 3 && clock_autodetect <= 732 + 3) {
|
|
return 12000000;
|
|
} else if (clock_autodetect >= 794 - 3 && clock_autodetect <= 794 + 3) {
|
|
return 13000000;
|
|
} else if (clock_autodetect >= 1172 - 3 && clock_autodetect <= 1172 + 3) {
|
|
return 19200000;
|
|
} else if (clock_autodetect >= 1587 - 3 && clock_autodetect <= 1587 + 3) {
|
|
return 26000000;
|
|
} else if (clock_autodetect >= 1025 - 3 && clock_autodetect <= 1025 + 3) {
|
|
return 16800000;
|
|
} else if (clock_autodetect >= 2344 - 3 && clock_autodetect <= 2344 + 3) {
|
|
return 38400000;
|
|
} else if (clock_autodetect >= 2928 - 3 && clock_autodetect <= 2928 + 3) {
|
|
return 48000000;
|
|
} else {
|
|
pr_err("%s: Unexpected clock autodetect value %d", __func__,
|
|
clock_autodetect);
|
|
BUG();
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int clk_div71_get_divider(unsigned long parent_rate, unsigned long rate,
|
|
u32 flags, u32 round_mode)
|
|
{
|
|
s64 divider_u71 = parent_rate;
|
|
if (!rate)
|
|
return -EINVAL;
|
|
|
|
if (!(flags & DIV_U71_INT))
|
|
divider_u71 *= 2;
|
|
if (round_mode == ROUND_DIVIDER_UP)
|
|
divider_u71 += rate - 1;
|
|
do_div(divider_u71, rate);
|
|
if (flags & DIV_U71_INT)
|
|
divider_u71 *= 2;
|
|
|
|
if (divider_u71 - 2 < 0)
|
|
return 0;
|
|
|
|
if (divider_u71 - 2 > 255)
|
|
return -EINVAL;
|
|
|
|
return divider_u71 - 2;
|
|
}
|
|
|
|
static int clk_div16_get_divider(unsigned long parent_rate, unsigned long rate)
|
|
{
|
|
s64 divider_u16;
|
|
|
|
divider_u16 = parent_rate;
|
|
if (!rate)
|
|
return -EINVAL;
|
|
divider_u16 += rate - 1;
|
|
do_div(divider_u16, rate);
|
|
|
|
if (divider_u16 - 1 < 0)
|
|
return 0;
|
|
|
|
if (divider_u16 - 1 > 0xFFFF)
|
|
return -EINVAL;
|
|
|
|
return divider_u16 - 1;
|
|
}
|
|
|
|
static unsigned long tegra30_clk_fixed_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
return to_clk_tegra(hw)->fixed_rate;
|
|
}
|
|
|
|
struct clk_ops tegra30_clk_32k_ops = {
|
|
.recalc_rate = tegra30_clk_fixed_recalc_rate,
|
|
};
|
|
|
|
/* clk_m functions */
|
|
static unsigned long tegra30_clk_m_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
if (!to_clk_tegra(hw)->fixed_rate)
|
|
to_clk_tegra(hw)->fixed_rate = clk_measure_input_freq();
|
|
return to_clk_tegra(hw)->fixed_rate;
|
|
}
|
|
|
|
static void tegra30_clk_m_init(struct clk_hw *hw)
|
|
{
|
|
u32 osc_ctrl = clk_readl(OSC_CTRL);
|
|
u32 auto_clock_control = osc_ctrl & ~OSC_CTRL_OSC_FREQ_MASK;
|
|
u32 pll_ref_div = osc_ctrl & OSC_CTRL_PLL_REF_DIV_MASK;
|
|
|
|
switch (to_clk_tegra(hw)->fixed_rate) {
|
|
case 12000000:
|
|
auto_clock_control |= OSC_CTRL_OSC_FREQ_12MHZ;
|
|
BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
|
|
break;
|
|
case 13000000:
|
|
auto_clock_control |= OSC_CTRL_OSC_FREQ_13MHZ;
|
|
BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
|
|
break;
|
|
case 19200000:
|
|
auto_clock_control |= OSC_CTRL_OSC_FREQ_19_2MHZ;
|
|
BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
|
|
break;
|
|
case 26000000:
|
|
auto_clock_control |= OSC_CTRL_OSC_FREQ_26MHZ;
|
|
BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
|
|
break;
|
|
case 16800000:
|
|
auto_clock_control |= OSC_CTRL_OSC_FREQ_16_8MHZ;
|
|
BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
|
|
break;
|
|
case 38400000:
|
|
auto_clock_control |= OSC_CTRL_OSC_FREQ_38_4MHZ;
|
|
BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_2);
|
|
break;
|
|
case 48000000:
|
|
auto_clock_control |= OSC_CTRL_OSC_FREQ_48MHZ;
|
|
BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_4);
|
|
break;
|
|
default:
|
|
pr_err("%s: Unexpected clock rate %ld", __func__,
|
|
to_clk_tegra(hw)->fixed_rate);
|
|
BUG();
|
|
}
|
|
clk_writel(auto_clock_control, OSC_CTRL);
|
|
}
|
|
|
|
struct clk_ops tegra30_clk_m_ops = {
|
|
.init = tegra30_clk_m_init,
|
|
.recalc_rate = tegra30_clk_m_recalc_rate,
|
|
};
|
|
|
|
static unsigned long tegra30_clk_m_div_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u64 rate = parent_rate;
|
|
|
|
if (c->mul != 0 && c->div != 0) {
|
|
rate *= c->mul;
|
|
rate += c->div - 1; /* round up */
|
|
do_div(rate, c->div);
|
|
}
|
|
|
|
return rate;
|
|
}
|
|
|
|
struct clk_ops tegra_clk_m_div_ops = {
|
|
.recalc_rate = tegra30_clk_m_div_recalc_rate,
|
|
};
|
|
|
|
/* PLL reference divider functions */
|
|
static unsigned long tegra30_pll_ref_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
unsigned long rate = parent_rate;
|
|
u32 pll_ref_div = clk_readl(OSC_CTRL) & OSC_CTRL_PLL_REF_DIV_MASK;
|
|
|
|
switch (pll_ref_div) {
|
|
case OSC_CTRL_PLL_REF_DIV_1:
|
|
c->div = 1;
|
|
break;
|
|
case OSC_CTRL_PLL_REF_DIV_2:
|
|
c->div = 2;
|
|
break;
|
|
case OSC_CTRL_PLL_REF_DIV_4:
|
|
c->div = 4;
|
|
break;
|
|
default:
|
|
pr_err("%s: Invalid pll ref divider %d", __func__, pll_ref_div);
|
|
BUG();
|
|
}
|
|
c->mul = 1;
|
|
|
|
if (c->mul != 0 && c->div != 0) {
|
|
rate *= c->mul;
|
|
rate += c->div - 1; /* round up */
|
|
do_div(rate, c->div);
|
|
}
|
|
|
|
return rate;
|
|
}
|
|
|
|
struct clk_ops tegra_pll_ref_ops = {
|
|
.recalc_rate = tegra30_pll_ref_recalc_rate,
|
|
};
|
|
|
|
/* super clock functions */
|
|
/* "super clocks" on tegra30 have two-stage muxes, fractional 7.1 divider and
|
|
* clock skipping super divider. We will ignore the clock skipping divider,
|
|
* since we can't lower the voltage when using the clock skip, but we can if
|
|
* we lower the PLL frequency. We will use 7.1 divider for CPU super-clock
|
|
* only when its parent is a fixed rate PLL, since we can't change PLL rate
|
|
* in this case.
|
|
*/
|
|
static void tegra30_super_clk_init(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
struct clk_tegra *p =
|
|
to_clk_tegra(__clk_get_hw(__clk_get_parent(hw->clk)));
|
|
|
|
c->state = ON;
|
|
if (c->flags & DIV_U71) {
|
|
/* Init safe 7.1 divider value (does not affect PLLX path) */
|
|
clk_writel(SUPER_CLOCK_DIV_U71_MIN << SUPER_CLOCK_DIV_U71_SHIFT,
|
|
c->reg + SUPER_CLK_DIVIDER);
|
|
c->mul = 2;
|
|
c->div = 2;
|
|
if (!(p->flags & PLLX))
|
|
c->div += SUPER_CLOCK_DIV_U71_MIN;
|
|
} else
|
|
clk_writel(0, c->reg + SUPER_CLK_DIVIDER);
|
|
}
|
|
|
|
static u8 tegra30_super_clk_get_parent(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val;
|
|
int source;
|
|
int shift;
|
|
|
|
val = clk_readl(c->reg + SUPER_CLK_MUX);
|
|
BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
|
|
((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
|
|
shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
|
|
SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
|
|
source = (val >> shift) & SUPER_SOURCE_MASK;
|
|
if (c->flags & DIV_2)
|
|
source |= val & SUPER_LP_DIV2_BYPASS;
|
|
|
|
return source;
|
|
}
|
|
|
|
static int tegra30_super_clk_set_parent(struct clk_hw *hw, u8 index)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
struct clk_tegra *p =
|
|
to_clk_tegra(__clk_get_hw(clk_get_parent(hw->clk)));
|
|
u32 val;
|
|
int shift;
|
|
|
|
val = clk_readl(c->reg + SUPER_CLK_MUX);
|
|
BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
|
|
((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
|
|
shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
|
|
SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
|
|
|
|
/* For LP mode super-clock switch between PLLX direct
|
|
and divided-by-2 outputs is allowed only when other
|
|
than PLLX clock source is current parent */
|
|
if ((c->flags & DIV_2) && (p->flags & PLLX) &&
|
|
((index ^ val) & SUPER_LP_DIV2_BYPASS)) {
|
|
if (p->flags & PLLX)
|
|
return -EINVAL;
|
|
val ^= SUPER_LP_DIV2_BYPASS;
|
|
clk_writel_delay(val, c->reg);
|
|
}
|
|
val &= ~(SUPER_SOURCE_MASK << shift);
|
|
val |= (index & SUPER_SOURCE_MASK) << shift;
|
|
|
|
/* 7.1 divider for CPU super-clock does not affect
|
|
PLLX path */
|
|
if (c->flags & DIV_U71) {
|
|
u32 div = 0;
|
|
if (!(p->flags & PLLX)) {
|
|
div = clk_readl(c->reg +
|
|
SUPER_CLK_DIVIDER);
|
|
div &= SUPER_CLOCK_DIV_U71_MASK;
|
|
div >>= SUPER_CLOCK_DIV_U71_SHIFT;
|
|
}
|
|
c->div = div + 2;
|
|
c->mul = 2;
|
|
}
|
|
clk_writel_delay(val, c->reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Do not use super clocks "skippers", since dividing using a clock skipper
|
|
* does not allow the voltage to be scaled down. Instead adjust the rate of
|
|
* the parent clock. This requires that the parent of a super clock have no
|
|
* other children, otherwise the rate will change underneath the other
|
|
* children. Special case: if fixed rate PLL is CPU super clock parent the
|
|
* rate of this PLL can't be changed, and it has many other children. In
|
|
* this case use 7.1 fractional divider to adjust the super clock rate.
|
|
*/
|
|
static int tegra30_super_clk_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
struct clk *parent = __clk_get_parent(hw->clk);
|
|
struct clk_tegra *cparent = to_clk_tegra(__clk_get_hw(parent));
|
|
|
|
if ((c->flags & DIV_U71) && (cparent->flags & PLL_FIXED)) {
|
|
int div = clk_div71_get_divider(parent_rate,
|
|
rate, c->flags, ROUND_DIVIDER_DOWN);
|
|
div = max(div, SUPER_CLOCK_DIV_U71_MIN);
|
|
|
|
clk_writel(div << SUPER_CLOCK_DIV_U71_SHIFT,
|
|
c->reg + SUPER_CLK_DIVIDER);
|
|
c->div = div + 2;
|
|
c->mul = 2;
|
|
return 0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static unsigned long tegra30_super_clk_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u64 rate = parent_rate;
|
|
|
|
if (c->mul != 0 && c->div != 0) {
|
|
rate *= c->mul;
|
|
rate += c->div - 1; /* round up */
|
|
do_div(rate, c->div);
|
|
}
|
|
|
|
return rate;
|
|
}
|
|
|
|
static long tegra30_super_clk_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
struct clk *parent = __clk_get_parent(hw->clk);
|
|
struct clk_tegra *cparent = to_clk_tegra(__clk_get_hw(parent));
|
|
int mul = 2;
|
|
int div;
|
|
|
|
if ((c->flags & DIV_U71) && (cparent->flags & PLL_FIXED)) {
|
|
div = clk_div71_get_divider(*prate,
|
|
rate, c->flags, ROUND_DIVIDER_DOWN);
|
|
div = max(div, SUPER_CLOCK_DIV_U71_MIN) + 2;
|
|
rate = *prate * mul;
|
|
rate += div - 1; /* round up */
|
|
do_div(rate, c->div);
|
|
|
|
return rate;
|
|
}
|
|
return *prate;
|
|
}
|
|
|
|
struct clk_ops tegra30_super_ops = {
|
|
.init = tegra30_super_clk_init,
|
|
.set_parent = tegra30_super_clk_set_parent,
|
|
.get_parent = tegra30_super_clk_get_parent,
|
|
.recalc_rate = tegra30_super_clk_recalc_rate,
|
|
.round_rate = tegra30_super_clk_round_rate,
|
|
.set_rate = tegra30_super_clk_set_rate,
|
|
};
|
|
|
|
static unsigned long tegra30_twd_clk_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u64 rate = parent_rate;
|
|
|
|
if (c->mul != 0 && c->div != 0) {
|
|
rate *= c->mul;
|
|
rate += c->div - 1; /* round up */
|
|
do_div(rate, c->div);
|
|
}
|
|
|
|
return rate;
|
|
}
|
|
|
|
struct clk_ops tegra30_twd_ops = {
|
|
.recalc_rate = tegra30_twd_clk_recalc_rate,
|
|
};
|
|
|
|
/* bus clock functions */
|
|
static int tegra30_bus_clk_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val = clk_readl(c->reg);
|
|
|
|
c->state = ((val >> c->reg_shift) & BUS_CLK_DISABLE) ? OFF : ON;
|
|
return c->state;
|
|
}
|
|
|
|
static int tegra30_bus_clk_enable(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val;
|
|
|
|
val = clk_readl(c->reg);
|
|
val &= ~(BUS_CLK_DISABLE << c->reg_shift);
|
|
clk_writel(val, c->reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tegra30_bus_clk_disable(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val;
|
|
|
|
val = clk_readl(c->reg);
|
|
val |= BUS_CLK_DISABLE << c->reg_shift;
|
|
clk_writel(val, c->reg);
|
|
}
|
|
|
|
static unsigned long tegra30_bus_clk_recalc_rate(struct clk_hw *hw,
|
|
unsigned long prate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val = clk_readl(c->reg);
|
|
u64 rate = prate;
|
|
|
|
c->div = ((val >> c->reg_shift) & BUS_CLK_DIV_MASK) + 1;
|
|
c->mul = 1;
|
|
|
|
if (c->mul != 0 && c->div != 0) {
|
|
rate *= c->mul;
|
|
rate += c->div - 1; /* round up */
|
|
do_div(rate, c->div);
|
|
}
|
|
return rate;
|
|
}
|
|
|
|
static int tegra30_bus_clk_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
int ret = -EINVAL;
|
|
u32 val;
|
|
int i;
|
|
|
|
val = clk_readl(c->reg);
|
|
for (i = 1; i <= 4; i++) {
|
|
if (rate == parent_rate / i) {
|
|
val &= ~(BUS_CLK_DIV_MASK << c->reg_shift);
|
|
val |= (i - 1) << c->reg_shift;
|
|
clk_writel(val, c->reg);
|
|
c->div = i;
|
|
c->mul = 1;
|
|
ret = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static long tegra30_bus_clk_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
unsigned long parent_rate = *prate;
|
|
s64 divider;
|
|
|
|
if (rate >= parent_rate)
|
|
return parent_rate;
|
|
|
|
divider = parent_rate;
|
|
divider += rate - 1;
|
|
do_div(divider, rate);
|
|
|
|
if (divider < 0)
|
|
return divider;
|
|
|
|
if (divider > 4)
|
|
divider = 4;
|
|
do_div(parent_rate, divider);
|
|
|
|
return parent_rate;
|
|
}
|
|
|
|
struct clk_ops tegra30_bus_ops = {
|
|
.is_enabled = tegra30_bus_clk_is_enabled,
|
|
.enable = tegra30_bus_clk_enable,
|
|
.disable = tegra30_bus_clk_disable,
|
|
.set_rate = tegra30_bus_clk_set_rate,
|
|
.round_rate = tegra30_bus_clk_round_rate,
|
|
.recalc_rate = tegra30_bus_clk_recalc_rate,
|
|
};
|
|
|
|
/* Blink output functions */
|
|
static int tegra30_blink_clk_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val;
|
|
|
|
val = pmc_readl(PMC_CTRL);
|
|
c->state = (val & PMC_CTRL_BLINK_ENB) ? ON : OFF;
|
|
return c->state;
|
|
}
|
|
|
|
static int tegra30_blink_clk_enable(struct clk_hw *hw)
|
|
{
|
|
u32 val;
|
|
|
|
val = pmc_readl(PMC_DPD_PADS_ORIDE);
|
|
pmc_writel(val | PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE);
|
|
|
|
val = pmc_readl(PMC_CTRL);
|
|
pmc_writel(val | PMC_CTRL_BLINK_ENB, PMC_CTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tegra30_blink_clk_disable(struct clk_hw *hw)
|
|
{
|
|
u32 val;
|
|
|
|
val = pmc_readl(PMC_CTRL);
|
|
pmc_writel(val & ~PMC_CTRL_BLINK_ENB, PMC_CTRL);
|
|
|
|
val = pmc_readl(PMC_DPD_PADS_ORIDE);
|
|
pmc_writel(val & ~PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE);
|
|
}
|
|
|
|
static int tegra30_blink_clk_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
|
|
if (rate >= parent_rate) {
|
|
c->div = 1;
|
|
pmc_writel(0, c->reg);
|
|
} else {
|
|
unsigned int on_off;
|
|
u32 val;
|
|
|
|
on_off = DIV_ROUND_UP(parent_rate / 8, rate);
|
|
c->div = on_off * 8;
|
|
|
|
val = (on_off & PMC_BLINK_TIMER_DATA_ON_MASK) <<
|
|
PMC_BLINK_TIMER_DATA_ON_SHIFT;
|
|
on_off &= PMC_BLINK_TIMER_DATA_OFF_MASK;
|
|
on_off <<= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
|
|
val |= on_off;
|
|
val |= PMC_BLINK_TIMER_ENB;
|
|
pmc_writel(val, c->reg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned long tegra30_blink_clk_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u64 rate = parent_rate;
|
|
u32 val;
|
|
u32 mul;
|
|
u32 div;
|
|
u32 on_off;
|
|
|
|
mul = 1;
|
|
val = pmc_readl(c->reg);
|
|
|
|
if (val & PMC_BLINK_TIMER_ENB) {
|
|
on_off = (val >> PMC_BLINK_TIMER_DATA_ON_SHIFT) &
|
|
PMC_BLINK_TIMER_DATA_ON_MASK;
|
|
val >>= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
|
|
val &= PMC_BLINK_TIMER_DATA_OFF_MASK;
|
|
on_off += val;
|
|
/* each tick in the blink timer is 4 32KHz clocks */
|
|
div = on_off * 4;
|
|
} else {
|
|
div = 1;
|
|
}
|
|
|
|
if (mul != 0 && div != 0) {
|
|
rate *= mul;
|
|
rate += div - 1; /* round up */
|
|
do_div(rate, div);
|
|
}
|
|
return rate;
|
|
}
|
|
|
|
static long tegra30_blink_clk_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
int div;
|
|
int mul;
|
|
long round_rate = *prate;
|
|
|
|
mul = 1;
|
|
|
|
if (rate >= *prate) {
|
|
div = 1;
|
|
} else {
|
|
div = DIV_ROUND_UP(*prate / 8, rate);
|
|
div *= 8;
|
|
}
|
|
|
|
round_rate *= mul;
|
|
round_rate += div - 1;
|
|
do_div(round_rate, div);
|
|
|
|
return round_rate;
|
|
}
|
|
|
|
struct clk_ops tegra30_blink_clk_ops = {
|
|
.is_enabled = tegra30_blink_clk_is_enabled,
|
|
.enable = tegra30_blink_clk_enable,
|
|
.disable = tegra30_blink_clk_disable,
|
|
.recalc_rate = tegra30_blink_clk_recalc_rate,
|
|
.round_rate = tegra30_blink_clk_round_rate,
|
|
.set_rate = tegra30_blink_clk_set_rate,
|
|
};
|
|
|
|
static void tegra30_utmi_param_configure(struct clk_hw *hw)
|
|
{
|
|
unsigned long main_rate =
|
|
__clk_get_rate(__clk_get_parent(__clk_get_parent(hw->clk)));
|
|
u32 reg;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
|
|
if (main_rate == utmi_parameters[i].osc_frequency)
|
|
break;
|
|
}
|
|
|
|
if (i >= ARRAY_SIZE(utmi_parameters)) {
|
|
pr_err("%s: Unexpected main rate %lu\n", __func__, main_rate);
|
|
return;
|
|
}
|
|
|
|
reg = clk_readl(UTMIP_PLL_CFG2);
|
|
|
|
/* Program UTMIP PLL stable and active counts */
|
|
/* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */
|
|
reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
|
|
reg |= UTMIP_PLL_CFG2_STABLE_COUNT(
|
|
utmi_parameters[i].stable_count);
|
|
|
|
reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
|
|
|
|
reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(
|
|
utmi_parameters[i].active_delay_count);
|
|
|
|
/* Remove power downs from UTMIP PLL control bits */
|
|
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
|
|
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
|
|
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
|
|
|
|
clk_writel(reg, UTMIP_PLL_CFG2);
|
|
|
|
/* Program UTMIP PLL delay and oscillator frequency counts */
|
|
reg = clk_readl(UTMIP_PLL_CFG1);
|
|
reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
|
|
|
|
reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(
|
|
utmi_parameters[i].enable_delay_count);
|
|
|
|
reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
|
|
reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(
|
|
utmi_parameters[i].xtal_freq_count);
|
|
|
|
/* Remove power downs from UTMIP PLL control bits */
|
|
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
|
|
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
|
|
reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
|
|
|
|
clk_writel(reg, UTMIP_PLL_CFG1);
|
|
}
|
|
|
|
/* PLL Functions */
|
|
static int tegra30_pll_clk_wait_for_lock(struct clk_tegra *c, u32 lock_reg,
|
|
u32 lock_bit)
|
|
{
|
|
int ret = 0;
|
|
|
|
#if USE_PLL_LOCK_BITS
|
|
int i;
|
|
for (i = 0; i < c->u.pll.lock_delay; i++) {
|
|
if (clk_readl(lock_reg) & lock_bit) {
|
|
udelay(PLL_POST_LOCK_DELAY);
|
|
return 0;
|
|
}
|
|
udelay(2); /* timeout = 2 * lock time */
|
|
}
|
|
pr_err("Timed out waiting for lock bit on pll %s",
|
|
__clk_get_name(hw->clk));
|
|
ret = -1;
|
|
#else
|
|
udelay(c->u.pll.lock_delay);
|
|
#endif
|
|
return ret;
|
|
}
|
|
|
|
static int tegra30_pll_clk_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val = clk_readl(c->reg + PLL_BASE);
|
|
|
|
c->state = (val & PLL_BASE_ENABLE) ? ON : OFF;
|
|
return c->state;
|
|
}
|
|
|
|
static void tegra30_pll_clk_init(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
|
|
if (c->flags & PLLU)
|
|
tegra30_utmi_param_configure(hw);
|
|
}
|
|
|
|
static int tegra30_pll_clk_enable(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val;
|
|
pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk));
|
|
|
|
#if USE_PLL_LOCK_BITS
|
|
val = clk_readl(c->reg + PLL_MISC(c));
|
|
val |= PLL_MISC_LOCK_ENABLE(c);
|
|
clk_writel(val, c->reg + PLL_MISC(c));
|
|
#endif
|
|
val = clk_readl(c->reg + PLL_BASE);
|
|
val &= ~PLL_BASE_BYPASS;
|
|
val |= PLL_BASE_ENABLE;
|
|
clk_writel(val, c->reg + PLL_BASE);
|
|
|
|
if (c->flags & PLLM) {
|
|
val = pmc_readl(PMC_PLLP_WB0_OVERRIDE);
|
|
val |= PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE;
|
|
pmc_writel(val, PMC_PLLP_WB0_OVERRIDE);
|
|
}
|
|
|
|
tegra30_pll_clk_wait_for_lock(c, c->reg + PLL_BASE, PLL_BASE_LOCK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tegra30_pll_clk_disable(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val;
|
|
pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk));
|
|
|
|
val = clk_readl(c->reg);
|
|
val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
|
|
clk_writel(val, c->reg);
|
|
|
|
if (c->flags & PLLM) {
|
|
val = pmc_readl(PMC_PLLP_WB0_OVERRIDE);
|
|
val &= ~PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE;
|
|
pmc_writel(val, PMC_PLLP_WB0_OVERRIDE);
|
|
}
|
|
}
|
|
|
|
static int tegra30_pll_clk_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val, p_div, old_base;
|
|
unsigned long input_rate;
|
|
const struct clk_pll_freq_table *sel;
|
|
struct clk_pll_freq_table cfg;
|
|
|
|
if (c->flags & PLL_FIXED) {
|
|
int ret = 0;
|
|
if (rate != c->u.pll.fixed_rate) {
|
|
pr_err("%s: Can not change %s fixed rate %lu to %lu\n",
|
|
__func__, __clk_get_name(hw->clk),
|
|
c->u.pll.fixed_rate, rate);
|
|
ret = -EINVAL;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
if (c->flags & PLLM) {
|
|
if (rate != __clk_get_rate(hw->clk)) {
|
|
pr_err("%s: Can not change memory %s rate in flight\n",
|
|
__func__, __clk_get_name(hw->clk));
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
p_div = 0;
|
|
input_rate = parent_rate;
|
|
|
|
/* Check if the target rate is tabulated */
|
|
for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
|
|
if (sel->input_rate == input_rate && sel->output_rate == rate) {
|
|
if (c->flags & PLLU) {
|
|
BUG_ON(sel->p < 1 || sel->p > 2);
|
|
if (sel->p == 1)
|
|
p_div = PLLU_BASE_POST_DIV;
|
|
} else {
|
|
BUG_ON(sel->p < 1);
|
|
for (val = sel->p; val > 1; val >>= 1)
|
|
p_div++;
|
|
p_div <<= PLL_BASE_DIVP_SHIFT;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Configure out-of-table rate */
|
|
if (sel->input_rate == 0) {
|
|
unsigned long cfreq;
|
|
BUG_ON(c->flags & PLLU);
|
|
sel = &cfg;
|
|
|
|
switch (input_rate) {
|
|
case 12000000:
|
|
case 26000000:
|
|
cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2000000;
|
|
break;
|
|
case 13000000:
|
|
cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2600000;
|
|
break;
|
|
case 16800000:
|
|
case 19200000:
|
|
cfreq = (rate <= 1200000 * 1000) ? 1200000 : 2400000;
|
|
break;
|
|
default:
|
|
pr_err("%s: Unexpected reference rate %lu\n",
|
|
__func__, input_rate);
|
|
BUG();
|
|
}
|
|
|
|
/* Raise VCO to guarantee 0.5% accuracy */
|
|
for (cfg.output_rate = rate; cfg.output_rate < 200 * cfreq;
|
|
cfg.output_rate <<= 1)
|
|
p_div++;
|
|
|
|
cfg.p = 0x1 << p_div;
|
|
cfg.m = input_rate / cfreq;
|
|
cfg.n = cfg.output_rate / cfreq;
|
|
cfg.cpcon = OUT_OF_TABLE_CPCON;
|
|
|
|
if ((cfg.m > (PLL_BASE_DIVM_MASK >> PLL_BASE_DIVM_SHIFT)) ||
|
|
(cfg.n > (PLL_BASE_DIVN_MASK >> PLL_BASE_DIVN_SHIFT)) ||
|
|
(p_div > (PLL_BASE_DIVP_MASK >> PLL_BASE_DIVP_SHIFT)) ||
|
|
(cfg.output_rate > c->u.pll.vco_max)) {
|
|
pr_err("%s: Failed to set %s out-of-table rate %lu\n",
|
|
__func__, __clk_get_name(hw->clk), rate);
|
|
return -EINVAL;
|
|
}
|
|
p_div <<= PLL_BASE_DIVP_SHIFT;
|
|
}
|
|
|
|
c->mul = sel->n;
|
|
c->div = sel->m * sel->p;
|
|
|
|
old_base = val = clk_readl(c->reg + PLL_BASE);
|
|
val &= ~(PLL_BASE_DIVM_MASK | PLL_BASE_DIVN_MASK |
|
|
((c->flags & PLLU) ? PLLU_BASE_POST_DIV : PLL_BASE_DIVP_MASK));
|
|
val |= (sel->m << PLL_BASE_DIVM_SHIFT) |
|
|
(sel->n << PLL_BASE_DIVN_SHIFT) | p_div;
|
|
if (val == old_base)
|
|
return 0;
|
|
|
|
if (c->state == ON) {
|
|
tegra30_pll_clk_disable(hw);
|
|
val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
|
|
}
|
|
clk_writel(val, c->reg + PLL_BASE);
|
|
|
|
if (c->flags & PLL_HAS_CPCON) {
|
|
val = clk_readl(c->reg + PLL_MISC(c));
|
|
val &= ~PLL_MISC_CPCON_MASK;
|
|
val |= sel->cpcon << PLL_MISC_CPCON_SHIFT;
|
|
if (c->flags & (PLLU | PLLD)) {
|
|
val &= ~PLL_MISC_LFCON_MASK;
|
|
if (sel->n >= PLLDU_LFCON_SET_DIVN)
|
|
val |= 0x1 << PLL_MISC_LFCON_SHIFT;
|
|
} else if (c->flags & (PLLX | PLLM)) {
|
|
val &= ~(0x1 << PLL_MISC_DCCON_SHIFT);
|
|
if (rate >= (c->u.pll.vco_max >> 1))
|
|
val |= 0x1 << PLL_MISC_DCCON_SHIFT;
|
|
}
|
|
clk_writel(val, c->reg + PLL_MISC(c));
|
|
}
|
|
|
|
if (c->state == ON)
|
|
tegra30_pll_clk_enable(hw);
|
|
|
|
c->u.pll.fixed_rate = rate;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long tegra30_pll_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
unsigned long input_rate = *prate;
|
|
u64 output_rate = *prate;
|
|
const struct clk_pll_freq_table *sel;
|
|
struct clk_pll_freq_table cfg;
|
|
int mul;
|
|
int div;
|
|
u32 p_div;
|
|
u32 val;
|
|
|
|
if (c->flags & PLL_FIXED)
|
|
return c->u.pll.fixed_rate;
|
|
|
|
if (c->flags & PLLM)
|
|
return __clk_get_rate(hw->clk);
|
|
|
|
p_div = 0;
|
|
/* Check if the target rate is tabulated */
|
|
for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
|
|
if (sel->input_rate == input_rate && sel->output_rate == rate) {
|
|
if (c->flags & PLLU) {
|
|
BUG_ON(sel->p < 1 || sel->p > 2);
|
|
if (sel->p == 1)
|
|
p_div = PLLU_BASE_POST_DIV;
|
|
} else {
|
|
BUG_ON(sel->p < 1);
|
|
for (val = sel->p; val > 1; val >>= 1)
|
|
p_div++;
|
|
p_div <<= PLL_BASE_DIVP_SHIFT;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (sel->input_rate == 0) {
|
|
unsigned long cfreq;
|
|
BUG_ON(c->flags & PLLU);
|
|
sel = &cfg;
|
|
|
|
switch (input_rate) {
|
|
case 12000000:
|
|
case 26000000:
|
|
cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2000000;
|
|
break;
|
|
case 13000000:
|
|
cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2600000;
|
|
break;
|
|
case 16800000:
|
|
case 19200000:
|
|
cfreq = (rate <= 1200000 * 1000) ? 1200000 : 2400000;
|
|
break;
|
|
default:
|
|
pr_err("%s: Unexpected reference rate %lu\n",
|
|
__func__, input_rate);
|
|
BUG();
|
|
}
|
|
|
|
/* Raise VCO to guarantee 0.5% accuracy */
|
|
for (cfg.output_rate = rate; cfg.output_rate < 200 * cfreq;
|
|
cfg.output_rate <<= 1)
|
|
p_div++;
|
|
|
|
cfg.p = 0x1 << p_div;
|
|
cfg.m = input_rate / cfreq;
|
|
cfg.n = cfg.output_rate / cfreq;
|
|
}
|
|
|
|
mul = sel->n;
|
|
div = sel->m * sel->p;
|
|
|
|
output_rate *= mul;
|
|
output_rate += div - 1; /* round up */
|
|
do_div(output_rate, div);
|
|
|
|
return output_rate;
|
|
}
|
|
|
|
static unsigned long tegra30_pll_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u64 rate = parent_rate;
|
|
u32 val = clk_readl(c->reg + PLL_BASE);
|
|
|
|
if (c->flags & PLL_FIXED && !(val & PLL_BASE_OVERRIDE)) {
|
|
const struct clk_pll_freq_table *sel;
|
|
for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
|
|
if (sel->input_rate == parent_rate &&
|
|
sel->output_rate == c->u.pll.fixed_rate) {
|
|
c->mul = sel->n;
|
|
c->div = sel->m * sel->p;
|
|
break;
|
|
}
|
|
}
|
|
pr_err("Clock %s has unknown fixed frequency\n",
|
|
__clk_get_name(hw->clk));
|
|
BUG();
|
|
} else if (val & PLL_BASE_BYPASS) {
|
|
c->mul = 1;
|
|
c->div = 1;
|
|
} else {
|
|
c->mul = (val & PLL_BASE_DIVN_MASK) >> PLL_BASE_DIVN_SHIFT;
|
|
c->div = (val & PLL_BASE_DIVM_MASK) >> PLL_BASE_DIVM_SHIFT;
|
|
if (c->flags & PLLU)
|
|
c->div *= (val & PLLU_BASE_POST_DIV) ? 1 : 2;
|
|
else
|
|
c->div *= (0x1 << ((val & PLL_BASE_DIVP_MASK) >>
|
|
PLL_BASE_DIVP_SHIFT));
|
|
}
|
|
|
|
if (c->mul != 0 && c->div != 0) {
|
|
rate *= c->mul;
|
|
rate += c->div - 1; /* round up */
|
|
do_div(rate, c->div);
|
|
}
|
|
|
|
return rate;
|
|
}
|
|
|
|
struct clk_ops tegra30_pll_ops = {
|
|
.is_enabled = tegra30_pll_clk_is_enabled,
|
|
.init = tegra30_pll_clk_init,
|
|
.enable = tegra30_pll_clk_enable,
|
|
.disable = tegra30_pll_clk_disable,
|
|
.recalc_rate = tegra30_pll_recalc_rate,
|
|
.round_rate = tegra30_pll_round_rate,
|
|
.set_rate = tegra30_pll_clk_set_rate,
|
|
};
|
|
|
|
int tegra30_plld_clk_cfg_ex(struct clk_hw *hw,
|
|
enum tegra_clk_ex_param p, u32 setting)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val, mask, reg;
|
|
|
|
switch (p) {
|
|
case TEGRA_CLK_PLLD_CSI_OUT_ENB:
|
|
mask = PLLD_BASE_CSI_CLKENABLE;
|
|
reg = c->reg + PLL_BASE;
|
|
break;
|
|
case TEGRA_CLK_PLLD_DSI_OUT_ENB:
|
|
mask = PLLD_MISC_DSI_CLKENABLE;
|
|
reg = c->reg + PLL_MISC(c);
|
|
break;
|
|
case TEGRA_CLK_PLLD_MIPI_MUX_SEL:
|
|
if (!(c->flags & PLL_ALT_MISC_REG)) {
|
|
mask = PLLD_BASE_DSIB_MUX_MASK;
|
|
reg = c->reg + PLL_BASE;
|
|
break;
|
|
}
|
|
/* fall through - error since PLLD2 does not have MUX_SEL control */
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
val = clk_readl(reg);
|
|
if (setting)
|
|
val |= mask;
|
|
else
|
|
val &= ~mask;
|
|
clk_writel(val, reg);
|
|
return 0;
|
|
}
|
|
|
|
static int tegra30_plle_clk_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val;
|
|
|
|
val = clk_readl(c->reg + PLL_BASE);
|
|
c->state = (val & PLLE_BASE_ENABLE) ? ON : OFF;
|
|
return c->state;
|
|
}
|
|
|
|
static void tegra30_plle_clk_disable(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val;
|
|
|
|
val = clk_readl(c->reg + PLL_BASE);
|
|
val &= ~(PLLE_BASE_CML_ENABLE | PLLE_BASE_ENABLE);
|
|
clk_writel(val, c->reg + PLL_BASE);
|
|
}
|
|
|
|
static void tegra30_plle_training(struct clk_tegra *c)
|
|
{
|
|
u32 val;
|
|
|
|
/* PLLE is already disabled, and setup cleared;
|
|
* create falling edge on PLLE IDDQ input */
|
|
val = pmc_readl(PMC_SATA_PWRGT);
|
|
val |= PMC_SATA_PWRGT_PLLE_IDDQ_VALUE;
|
|
pmc_writel(val, PMC_SATA_PWRGT);
|
|
|
|
val = pmc_readl(PMC_SATA_PWRGT);
|
|
val |= PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL;
|
|
pmc_writel(val, PMC_SATA_PWRGT);
|
|
|
|
val = pmc_readl(PMC_SATA_PWRGT);
|
|
val &= ~PMC_SATA_PWRGT_PLLE_IDDQ_VALUE;
|
|
pmc_writel(val, PMC_SATA_PWRGT);
|
|
|
|
do {
|
|
val = clk_readl(c->reg + PLL_MISC(c));
|
|
} while (!(val & PLLE_MISC_READY));
|
|
}
|
|
|
|
static int tegra30_plle_configure(struct clk_hw *hw, bool force_training)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
struct clk *parent = __clk_get_parent(hw->clk);
|
|
const struct clk_pll_freq_table *sel;
|
|
u32 val;
|
|
|
|
unsigned long rate = c->u.pll.fixed_rate;
|
|
unsigned long input_rate = __clk_get_rate(parent);
|
|
|
|
for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
|
|
if (sel->input_rate == input_rate && sel->output_rate == rate)
|
|
break;
|
|
}
|
|
|
|
if (sel->input_rate == 0)
|
|
return -ENOSYS;
|
|
|
|
/* disable PLLE, clear setup fiels */
|
|
tegra30_plle_clk_disable(hw);
|
|
|
|
val = clk_readl(c->reg + PLL_MISC(c));
|
|
val &= ~(PLLE_MISC_LOCK_ENABLE | PLLE_MISC_SETUP_MASK);
|
|
clk_writel(val, c->reg + PLL_MISC(c));
|
|
|
|
/* training */
|
|
val = clk_readl(c->reg + PLL_MISC(c));
|
|
if (force_training || (!(val & PLLE_MISC_READY)))
|
|
tegra30_plle_training(c);
|
|
|
|
/* configure dividers, setup, disable SS */
|
|
val = clk_readl(c->reg + PLL_BASE);
|
|
val &= ~PLLE_BASE_DIV_MASK;
|
|
val |= PLLE_BASE_DIV(sel->m, sel->n, sel->p, sel->cpcon);
|
|
clk_writel(val, c->reg + PLL_BASE);
|
|
c->mul = sel->n;
|
|
c->div = sel->m * sel->p;
|
|
|
|
val = clk_readl(c->reg + PLL_MISC(c));
|
|
val |= PLLE_MISC_SETUP_VALUE;
|
|
val |= PLLE_MISC_LOCK_ENABLE;
|
|
clk_writel(val, c->reg + PLL_MISC(c));
|
|
|
|
val = clk_readl(PLLE_SS_CTRL);
|
|
val |= PLLE_SS_DISABLE;
|
|
clk_writel(val, PLLE_SS_CTRL);
|
|
|
|
/* enable and lock PLLE*/
|
|
val = clk_readl(c->reg + PLL_BASE);
|
|
val |= (PLLE_BASE_CML_ENABLE | PLLE_BASE_ENABLE);
|
|
clk_writel(val, c->reg + PLL_BASE);
|
|
|
|
tegra30_pll_clk_wait_for_lock(c, c->reg + PLL_MISC(c), PLLE_MISC_LOCK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra30_plle_clk_enable(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
|
|
return tegra30_plle_configure(hw, !c->set);
|
|
}
|
|
|
|
static unsigned long tegra30_plle_clk_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
unsigned long rate = parent_rate;
|
|
u32 val;
|
|
|
|
val = clk_readl(c->reg + PLL_BASE);
|
|
c->mul = (val & PLLE_BASE_DIVN_MASK) >> PLLE_BASE_DIVN_SHIFT;
|
|
c->div = (val & PLLE_BASE_DIVM_MASK) >> PLLE_BASE_DIVM_SHIFT;
|
|
c->div *= (val & PLLE_BASE_DIVP_MASK) >> PLLE_BASE_DIVP_SHIFT;
|
|
|
|
if (c->mul != 0 && c->div != 0) {
|
|
rate *= c->mul;
|
|
rate += c->div - 1; /* round up */
|
|
do_div(rate, c->div);
|
|
}
|
|
return rate;
|
|
}
|
|
|
|
struct clk_ops tegra30_plle_ops = {
|
|
.is_enabled = tegra30_plle_clk_is_enabled,
|
|
.enable = tegra30_plle_clk_enable,
|
|
.disable = tegra30_plle_clk_disable,
|
|
.recalc_rate = tegra30_plle_clk_recalc_rate,
|
|
};
|
|
|
|
/* Clock divider ops */
|
|
static int tegra30_pll_div_clk_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
|
|
if (c->flags & DIV_U71) {
|
|
u32 val = clk_readl(c->reg);
|
|
val >>= c->reg_shift;
|
|
c->state = (val & PLL_OUT_CLKEN) ? ON : OFF;
|
|
if (!(val & PLL_OUT_RESET_DISABLE))
|
|
c->state = OFF;
|
|
} else {
|
|
c->state = ON;
|
|
}
|
|
return c->state;
|
|
}
|
|
|
|
static int tegra30_pll_div_clk_enable(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val;
|
|
u32 new_val;
|
|
|
|
pr_debug("%s: %s\n", __func__, __clk_get_name(hw->clk));
|
|
if (c->flags & DIV_U71) {
|
|
val = clk_readl(c->reg);
|
|
new_val = val >> c->reg_shift;
|
|
new_val &= 0xFFFF;
|
|
|
|
new_val |= PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE;
|
|
|
|
val &= ~(0xFFFF << c->reg_shift);
|
|
val |= new_val << c->reg_shift;
|
|
clk_writel_delay(val, c->reg);
|
|
return 0;
|
|
} else if (c->flags & DIV_2) {
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void tegra30_pll_div_clk_disable(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val;
|
|
u32 new_val;
|
|
|
|
pr_debug("%s: %s\n", __func__, __clk_get_name(hw->clk));
|
|
if (c->flags & DIV_U71) {
|
|
val = clk_readl(c->reg);
|
|
new_val = val >> c->reg_shift;
|
|
new_val &= 0xFFFF;
|
|
|
|
new_val &= ~(PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE);
|
|
|
|
val &= ~(0xFFFF << c->reg_shift);
|
|
val |= new_val << c->reg_shift;
|
|
clk_writel_delay(val, c->reg);
|
|
}
|
|
}
|
|
|
|
static int tegra30_pll_div_clk_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val;
|
|
u32 new_val;
|
|
int divider_u71;
|
|
|
|
if (c->flags & DIV_U71) {
|
|
divider_u71 = clk_div71_get_divider(
|
|
parent_rate, rate, c->flags, ROUND_DIVIDER_UP);
|
|
if (divider_u71 >= 0) {
|
|
val = clk_readl(c->reg);
|
|
new_val = val >> c->reg_shift;
|
|
new_val &= 0xFFFF;
|
|
if (c->flags & DIV_U71_FIXED)
|
|
new_val |= PLL_OUT_OVERRIDE;
|
|
new_val &= ~PLL_OUT_RATIO_MASK;
|
|
new_val |= divider_u71 << PLL_OUT_RATIO_SHIFT;
|
|
|
|
val &= ~(0xFFFF << c->reg_shift);
|
|
val |= new_val << c->reg_shift;
|
|
clk_writel_delay(val, c->reg);
|
|
c->div = divider_u71 + 2;
|
|
c->mul = 2;
|
|
c->fixed_rate = rate;
|
|
return 0;
|
|
}
|
|
} else if (c->flags & DIV_2) {
|
|
c->fixed_rate = rate;
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static unsigned long tegra30_pll_div_clk_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u64 rate = parent_rate;
|
|
|
|
if (c->flags & DIV_U71) {
|
|
u32 divu71;
|
|
u32 val = clk_readl(c->reg);
|
|
val >>= c->reg_shift;
|
|
|
|
divu71 = (val & PLL_OUT_RATIO_MASK) >> PLL_OUT_RATIO_SHIFT;
|
|
c->div = (divu71 + 2);
|
|
c->mul = 2;
|
|
} else if (c->flags & DIV_2) {
|
|
if (c->flags & (PLLD | PLLX)) {
|
|
c->div = 2;
|
|
c->mul = 1;
|
|
} else
|
|
BUG();
|
|
} else {
|
|
c->div = 1;
|
|
c->mul = 1;
|
|
}
|
|
if (c->mul != 0 && c->div != 0) {
|
|
rate *= c->mul;
|
|
rate += c->div - 1; /* round up */
|
|
do_div(rate, c->div);
|
|
}
|
|
|
|
return rate;
|
|
}
|
|
|
|
static long tegra30_pll_div_clk_round_rate(struct clk_hw *hw,
|
|
unsigned long rate, unsigned long *prate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
unsigned long parent_rate = __clk_get_rate(__clk_get_parent(hw->clk));
|
|
int divider;
|
|
|
|
if (prate)
|
|
parent_rate = *prate;
|
|
|
|
if (c->flags & DIV_U71) {
|
|
divider = clk_div71_get_divider(
|
|
parent_rate, rate, c->flags, ROUND_DIVIDER_UP);
|
|
if (divider < 0)
|
|
return divider;
|
|
return DIV_ROUND_UP(parent_rate * 2, divider + 2);
|
|
} else if (c->flags & DIV_2) {
|
|
*prate = rate * 2;
|
|
return rate;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
struct clk_ops tegra30_pll_div_ops = {
|
|
.is_enabled = tegra30_pll_div_clk_is_enabled,
|
|
.enable = tegra30_pll_div_clk_enable,
|
|
.disable = tegra30_pll_div_clk_disable,
|
|
.set_rate = tegra30_pll_div_clk_set_rate,
|
|
.recalc_rate = tegra30_pll_div_clk_recalc_rate,
|
|
.round_rate = tegra30_pll_div_clk_round_rate,
|
|
};
|
|
|
|
/* Periph clk ops */
|
|
static inline u32 periph_clk_source_mask(struct clk_tegra *c)
|
|
{
|
|
if (c->flags & MUX8)
|
|
return 7 << 29;
|
|
else if (c->flags & MUX_PWM)
|
|
return 3 << 28;
|
|
else if (c->flags & MUX_CLK_OUT)
|
|
return 3 << (c->u.periph.clk_num + 4);
|
|
else if (c->flags & PLLD)
|
|
return PLLD_BASE_DSIB_MUX_MASK;
|
|
else
|
|
return 3 << 30;
|
|
}
|
|
|
|
static inline u32 periph_clk_source_shift(struct clk_tegra *c)
|
|
{
|
|
if (c->flags & MUX8)
|
|
return 29;
|
|
else if (c->flags & MUX_PWM)
|
|
return 28;
|
|
else if (c->flags & MUX_CLK_OUT)
|
|
return c->u.periph.clk_num + 4;
|
|
else if (c->flags & PLLD)
|
|
return PLLD_BASE_DSIB_MUX_SHIFT;
|
|
else
|
|
return 30;
|
|
}
|
|
|
|
static int tegra30_periph_clk_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
|
|
c->state = ON;
|
|
if (!(clk_readl(PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_BIT(c)))
|
|
c->state = OFF;
|
|
if (!(c->flags & PERIPH_NO_RESET))
|
|
if (clk_readl(PERIPH_CLK_TO_RST_REG(c)) & PERIPH_CLK_TO_BIT(c))
|
|
c->state = OFF;
|
|
return c->state;
|
|
}
|
|
|
|
static int tegra30_periph_clk_enable(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
|
|
tegra_periph_clk_enable_refcount[c->u.periph.clk_num]++;
|
|
if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] > 1)
|
|
return 0;
|
|
|
|
clk_writel_delay(PERIPH_CLK_TO_BIT(c), PERIPH_CLK_TO_ENB_SET_REG(c));
|
|
if (!(c->flags & PERIPH_NO_RESET) &&
|
|
!(c->flags & PERIPH_MANUAL_RESET)) {
|
|
if (clk_readl(PERIPH_CLK_TO_RST_REG(c)) &
|
|
PERIPH_CLK_TO_BIT(c)) {
|
|
udelay(5); /* reset propagation delay */
|
|
clk_writel(PERIPH_CLK_TO_BIT(c),
|
|
PERIPH_CLK_TO_RST_CLR_REG(c));
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void tegra30_periph_clk_disable(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
unsigned long val;
|
|
|
|
tegra_periph_clk_enable_refcount[c->u.periph.clk_num]--;
|
|
|
|
if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] > 0)
|
|
return;
|
|
|
|
/* If peripheral is in the APB bus then read the APB bus to
|
|
* flush the write operation in apb bus. This will avoid the
|
|
* peripheral access after disabling clock*/
|
|
if (c->flags & PERIPH_ON_APB)
|
|
val = chipid_readl();
|
|
|
|
clk_writel_delay(PERIPH_CLK_TO_BIT(c), PERIPH_CLK_TO_ENB_CLR_REG(c));
|
|
}
|
|
|
|
void tegra30_periph_clk_reset(struct clk_hw *hw, bool assert)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
unsigned long val;
|
|
|
|
if (!(c->flags & PERIPH_NO_RESET)) {
|
|
if (assert) {
|
|
/* If peripheral is in the APB bus then read the APB
|
|
* bus to flush the write operation in apb bus. This
|
|
* will avoid the peripheral access after disabling
|
|
* clock */
|
|
if (c->flags & PERIPH_ON_APB)
|
|
val = chipid_readl();
|
|
|
|
clk_writel(PERIPH_CLK_TO_BIT(c),
|
|
PERIPH_CLK_TO_RST_SET_REG(c));
|
|
} else
|
|
clk_writel(PERIPH_CLK_TO_BIT(c),
|
|
PERIPH_CLK_TO_RST_CLR_REG(c));
|
|
}
|
|
}
|
|
|
|
static int tegra30_periph_clk_set_parent(struct clk_hw *hw, u8 index)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val;
|
|
|
|
if (!(c->flags & MUX))
|
|
return (index == 0) ? 0 : (-EINVAL);
|
|
|
|
val = clk_readl(c->reg);
|
|
val &= ~periph_clk_source_mask(c);
|
|
val |= (index << periph_clk_source_shift(c));
|
|
clk_writel_delay(val, c->reg);
|
|
return 0;
|
|
}
|
|
|
|
static u8 tegra30_periph_clk_get_parent(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val = clk_readl(c->reg);
|
|
int source = (val & periph_clk_source_mask(c)) >>
|
|
periph_clk_source_shift(c);
|
|
|
|
if (!(c->flags & MUX))
|
|
return 0;
|
|
|
|
return source;
|
|
}
|
|
|
|
static int tegra30_periph_clk_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val;
|
|
int divider;
|
|
|
|
if (c->flags & DIV_U71) {
|
|
divider = clk_div71_get_divider(
|
|
parent_rate, rate, c->flags, ROUND_DIVIDER_UP);
|
|
if (divider >= 0) {
|
|
val = clk_readl(c->reg);
|
|
val &= ~PERIPH_CLK_SOURCE_DIVU71_MASK;
|
|
val |= divider;
|
|
if (c->flags & DIV_U71_UART) {
|
|
if (divider)
|
|
val |= PERIPH_CLK_UART_DIV_ENB;
|
|
else
|
|
val &= ~PERIPH_CLK_UART_DIV_ENB;
|
|
}
|
|
clk_writel_delay(val, c->reg);
|
|
c->div = divider + 2;
|
|
c->mul = 2;
|
|
return 0;
|
|
}
|
|
} else if (c->flags & DIV_U16) {
|
|
divider = clk_div16_get_divider(parent_rate, rate);
|
|
if (divider >= 0) {
|
|
val = clk_readl(c->reg);
|
|
val &= ~PERIPH_CLK_SOURCE_DIVU16_MASK;
|
|
val |= divider;
|
|
clk_writel_delay(val, c->reg);
|
|
c->div = divider + 1;
|
|
c->mul = 1;
|
|
return 0;
|
|
}
|
|
} else if (parent_rate <= rate) {
|
|
c->div = 1;
|
|
c->mul = 1;
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static long tegra30_periph_clk_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
unsigned long parent_rate = __clk_get_rate(__clk_get_parent(hw->clk));
|
|
int divider;
|
|
|
|
if (prate)
|
|
parent_rate = *prate;
|
|
|
|
if (c->flags & DIV_U71) {
|
|
divider = clk_div71_get_divider(
|
|
parent_rate, rate, c->flags, ROUND_DIVIDER_UP);
|
|
if (divider < 0)
|
|
return divider;
|
|
|
|
return DIV_ROUND_UP(parent_rate * 2, divider + 2);
|
|
} else if (c->flags & DIV_U16) {
|
|
divider = clk_div16_get_divider(parent_rate, rate);
|
|
if (divider < 0)
|
|
return divider;
|
|
return DIV_ROUND_UP(parent_rate, divider + 1);
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static unsigned long tegra30_periph_clk_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u64 rate = parent_rate;
|
|
u32 val = clk_readl(c->reg);
|
|
|
|
if (c->flags & DIV_U71) {
|
|
u32 divu71 = val & PERIPH_CLK_SOURCE_DIVU71_MASK;
|
|
if ((c->flags & DIV_U71_UART) &&
|
|
(!(val & PERIPH_CLK_UART_DIV_ENB))) {
|
|
divu71 = 0;
|
|
}
|
|
if (c->flags & DIV_U71_IDLE) {
|
|
val &= ~(PERIPH_CLK_SOURCE_DIVU71_MASK <<
|
|
PERIPH_CLK_SOURCE_DIVIDLE_SHIFT);
|
|
val |= (PERIPH_CLK_SOURCE_DIVIDLE_VAL <<
|
|
PERIPH_CLK_SOURCE_DIVIDLE_SHIFT);
|
|
clk_writel(val, c->reg);
|
|
}
|
|
c->div = divu71 + 2;
|
|
c->mul = 2;
|
|
} else if (c->flags & DIV_U16) {
|
|
u32 divu16 = val & PERIPH_CLK_SOURCE_DIVU16_MASK;
|
|
c->div = divu16 + 1;
|
|
c->mul = 1;
|
|
} else {
|
|
c->div = 1;
|
|
c->mul = 1;
|
|
}
|
|
|
|
if (c->mul != 0 && c->div != 0) {
|
|
rate *= c->mul;
|
|
rate += c->div - 1; /* round up */
|
|
do_div(rate, c->div);
|
|
}
|
|
return rate;
|
|
}
|
|
|
|
struct clk_ops tegra30_periph_clk_ops = {
|
|
.is_enabled = tegra30_periph_clk_is_enabled,
|
|
.enable = tegra30_periph_clk_enable,
|
|
.disable = tegra30_periph_clk_disable,
|
|
.set_parent = tegra30_periph_clk_set_parent,
|
|
.get_parent = tegra30_periph_clk_get_parent,
|
|
.set_rate = tegra30_periph_clk_set_rate,
|
|
.round_rate = tegra30_periph_clk_round_rate,
|
|
.recalc_rate = tegra30_periph_clk_recalc_rate,
|
|
};
|
|
|
|
static int tegra30_dsib_clk_set_parent(struct clk_hw *hw, u8 index)
|
|
{
|
|
struct clk *d = clk_get_sys(NULL, "pll_d");
|
|
/* The DSIB parent selection bit is in PLLD base
|
|
register - can not do direct r-m-w, must be
|
|
protected by PLLD lock */
|
|
tegra_clk_cfg_ex(
|
|
d, TEGRA_CLK_PLLD_MIPI_MUX_SEL, index);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct clk_ops tegra30_dsib_clk_ops = {
|
|
.is_enabled = tegra30_periph_clk_is_enabled,
|
|
.enable = &tegra30_periph_clk_enable,
|
|
.disable = &tegra30_periph_clk_disable,
|
|
.set_parent = &tegra30_dsib_clk_set_parent,
|
|
.get_parent = &tegra30_periph_clk_get_parent,
|
|
.set_rate = &tegra30_periph_clk_set_rate,
|
|
.round_rate = &tegra30_periph_clk_round_rate,
|
|
.recalc_rate = &tegra30_periph_clk_recalc_rate,
|
|
};
|
|
|
|
/* Periph extended clock configuration ops */
|
|
int tegra30_vi_clk_cfg_ex(struct clk_hw *hw,
|
|
enum tegra_clk_ex_param p, u32 setting)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
|
|
if (p == TEGRA_CLK_VI_INP_SEL) {
|
|
u32 val = clk_readl(c->reg);
|
|
val &= ~PERIPH_CLK_VI_SEL_EX_MASK;
|
|
val |= (setting << PERIPH_CLK_VI_SEL_EX_SHIFT) &
|
|
PERIPH_CLK_VI_SEL_EX_MASK;
|
|
clk_writel(val, c->reg);
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
int tegra30_nand_clk_cfg_ex(struct clk_hw *hw,
|
|
enum tegra_clk_ex_param p, u32 setting)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
|
|
if (p == TEGRA_CLK_NAND_PAD_DIV2_ENB) {
|
|
u32 val = clk_readl(c->reg);
|
|
if (setting)
|
|
val |= PERIPH_CLK_NAND_DIV_EX_ENB;
|
|
else
|
|
val &= ~PERIPH_CLK_NAND_DIV_EX_ENB;
|
|
clk_writel(val, c->reg);
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
int tegra30_dtv_clk_cfg_ex(struct clk_hw *hw,
|
|
enum tegra_clk_ex_param p, u32 setting)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
|
|
if (p == TEGRA_CLK_DTV_INVERT) {
|
|
u32 val = clk_readl(c->reg);
|
|
if (setting)
|
|
val |= PERIPH_CLK_DTV_POLARITY_INV;
|
|
else
|
|
val &= ~PERIPH_CLK_DTV_POLARITY_INV;
|
|
clk_writel(val, c->reg);
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Output clock ops */
|
|
|
|
static DEFINE_SPINLOCK(clk_out_lock);
|
|
|
|
static int tegra30_clk_out_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val = pmc_readl(c->reg);
|
|
|
|
c->state = (val & (0x1 << c->u.periph.clk_num)) ? ON : OFF;
|
|
c->mul = 1;
|
|
c->div = 1;
|
|
return c->state;
|
|
}
|
|
|
|
static int tegra30_clk_out_enable(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&clk_out_lock, flags);
|
|
val = pmc_readl(c->reg);
|
|
val |= (0x1 << c->u.periph.clk_num);
|
|
pmc_writel(val, c->reg);
|
|
spin_unlock_irqrestore(&clk_out_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tegra30_clk_out_disable(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&clk_out_lock, flags);
|
|
val = pmc_readl(c->reg);
|
|
val &= ~(0x1 << c->u.periph.clk_num);
|
|
pmc_writel(val, c->reg);
|
|
spin_unlock_irqrestore(&clk_out_lock, flags);
|
|
}
|
|
|
|
static int tegra30_clk_out_set_parent(struct clk_hw *hw, u8 index)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&clk_out_lock, flags);
|
|
val = pmc_readl(c->reg);
|
|
val &= ~periph_clk_source_mask(c);
|
|
val |= (index << periph_clk_source_shift(c));
|
|
pmc_writel(val, c->reg);
|
|
spin_unlock_irqrestore(&clk_out_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u8 tegra30_clk_out_get_parent(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val = pmc_readl(c->reg);
|
|
int source;
|
|
|
|
source = (val & periph_clk_source_mask(c)) >>
|
|
periph_clk_source_shift(c);
|
|
return source;
|
|
}
|
|
|
|
struct clk_ops tegra_clk_out_ops = {
|
|
.is_enabled = tegra30_clk_out_is_enabled,
|
|
.enable = tegra30_clk_out_enable,
|
|
.disable = tegra30_clk_out_disable,
|
|
.set_parent = tegra30_clk_out_set_parent,
|
|
.get_parent = tegra30_clk_out_get_parent,
|
|
.recalc_rate = tegra30_clk_fixed_recalc_rate,
|
|
};
|
|
|
|
/* Clock doubler ops */
|
|
static int tegra30_clk_double_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
|
|
c->state = ON;
|
|
if (!(clk_readl(PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_BIT(c)))
|
|
c->state = OFF;
|
|
return c->state;
|
|
};
|
|
|
|
static int tegra30_clk_double_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val;
|
|
|
|
if (rate == parent_rate) {
|
|
val = clk_readl(c->reg) | (0x1 << c->reg_shift);
|
|
clk_writel(val, c->reg);
|
|
c->mul = 1;
|
|
c->div = 1;
|
|
return 0;
|
|
} else if (rate == 2 * parent_rate) {
|
|
val = clk_readl(c->reg) & (~(0x1 << c->reg_shift));
|
|
clk_writel(val, c->reg);
|
|
c->mul = 2;
|
|
c->div = 1;
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static unsigned long tegra30_clk_double_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u64 rate = parent_rate;
|
|
|
|
u32 val = clk_readl(c->reg);
|
|
c->mul = val & (0x1 << c->reg_shift) ? 1 : 2;
|
|
c->div = 1;
|
|
|
|
if (c->mul != 0 && c->div != 0) {
|
|
rate *= c->mul;
|
|
rate += c->div - 1; /* round up */
|
|
do_div(rate, c->div);
|
|
}
|
|
|
|
return rate;
|
|
}
|
|
|
|
static long tegra30_clk_double_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
unsigned long output_rate = *prate;
|
|
|
|
do_div(output_rate, 2);
|
|
return output_rate;
|
|
}
|
|
|
|
struct clk_ops tegra30_clk_double_ops = {
|
|
.is_enabled = tegra30_clk_double_is_enabled,
|
|
.enable = tegra30_periph_clk_enable,
|
|
.disable = tegra30_periph_clk_disable,
|
|
.recalc_rate = tegra30_clk_double_recalc_rate,
|
|
.round_rate = tegra30_clk_double_round_rate,
|
|
.set_rate = tegra30_clk_double_set_rate,
|
|
};
|
|
|
|
/* Audio sync clock ops */
|
|
struct clk_ops tegra_sync_source_ops = {
|
|
.recalc_rate = tegra30_clk_fixed_recalc_rate,
|
|
};
|
|
|
|
static int tegra30_audio_sync_clk_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val = clk_readl(c->reg);
|
|
c->state = (val & AUDIO_SYNC_DISABLE_BIT) ? OFF : ON;
|
|
return c->state;
|
|
}
|
|
|
|
static int tegra30_audio_sync_clk_enable(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val = clk_readl(c->reg);
|
|
clk_writel((val & (~AUDIO_SYNC_DISABLE_BIT)), c->reg);
|
|
return 0;
|
|
}
|
|
|
|
static void tegra30_audio_sync_clk_disable(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val = clk_readl(c->reg);
|
|
clk_writel((val | AUDIO_SYNC_DISABLE_BIT), c->reg);
|
|
}
|
|
|
|
static int tegra30_audio_sync_clk_set_parent(struct clk_hw *hw, u8 index)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val;
|
|
|
|
val = clk_readl(c->reg);
|
|
val &= ~AUDIO_SYNC_SOURCE_MASK;
|
|
val |= index;
|
|
|
|
clk_writel(val, c->reg);
|
|
return 0;
|
|
}
|
|
|
|
static u8 tegra30_audio_sync_clk_get_parent(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val = clk_readl(c->reg);
|
|
int source;
|
|
|
|
source = val & AUDIO_SYNC_SOURCE_MASK;
|
|
return source;
|
|
}
|
|
|
|
struct clk_ops tegra30_audio_sync_clk_ops = {
|
|
.is_enabled = tegra30_audio_sync_clk_is_enabled,
|
|
.enable = tegra30_audio_sync_clk_enable,
|
|
.disable = tegra30_audio_sync_clk_disable,
|
|
.set_parent = tegra30_audio_sync_clk_set_parent,
|
|
.get_parent = tegra30_audio_sync_clk_get_parent,
|
|
.recalc_rate = tegra30_clk_fixed_recalc_rate,
|
|
};
|
|
|
|
/* cml0 (pcie), and cml1 (sata) clock ops */
|
|
static int tegra30_cml_clk_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
u32 val = clk_readl(c->reg);
|
|
c->state = val & (0x1 << c->u.periph.clk_num) ? ON : OFF;
|
|
return c->state;
|
|
}
|
|
|
|
static int tegra30_cml_clk_enable(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
|
|
u32 val = clk_readl(c->reg);
|
|
val |= (0x1 << c->u.periph.clk_num);
|
|
clk_writel(val, c->reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tegra30_cml_clk_disable(struct clk_hw *hw)
|
|
{
|
|
struct clk_tegra *c = to_clk_tegra(hw);
|
|
|
|
u32 val = clk_readl(c->reg);
|
|
val &= ~(0x1 << c->u.periph.clk_num);
|
|
clk_writel(val, c->reg);
|
|
}
|
|
|
|
struct clk_ops tegra_cml_clk_ops = {
|
|
.is_enabled = tegra30_cml_clk_is_enabled,
|
|
.enable = tegra30_cml_clk_enable,
|
|
.disable = tegra30_cml_clk_disable,
|
|
.recalc_rate = tegra30_clk_fixed_recalc_rate,
|
|
};
|
|
|
|
struct clk_ops tegra_pciex_clk_ops = {
|
|
.recalc_rate = tegra30_clk_fixed_recalc_rate,
|
|
};
|
|
|
|
/* Tegra30 CPU clock and reset control functions */
|
|
static void tegra30_wait_cpu_in_reset(u32 cpu)
|
|
{
|
|
unsigned int reg;
|
|
|
|
do {
|
|
reg = readl(reg_clk_base +
|
|
TEGRA30_CLK_RST_CONTROLLER_CPU_CMPLX_STATUS);
|
|
cpu_relax();
|
|
} while (!(reg & (1 << cpu))); /* check CPU been reset or not */
|
|
|
|
return;
|
|
}
|
|
|
|
static void tegra30_put_cpu_in_reset(u32 cpu)
|
|
{
|
|
writel(CPU_RESET(cpu),
|
|
reg_clk_base + TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET);
|
|
dmb();
|
|
}
|
|
|
|
static void tegra30_cpu_out_of_reset(u32 cpu)
|
|
{
|
|
writel(CPU_RESET(cpu),
|
|
reg_clk_base + TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR);
|
|
wmb();
|
|
}
|
|
|
|
static void tegra30_enable_cpu_clock(u32 cpu)
|
|
{
|
|
unsigned int reg;
|
|
|
|
writel(CPU_CLOCK(cpu),
|
|
reg_clk_base + TEGRA30_CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
|
|
reg = readl(reg_clk_base +
|
|
TEGRA30_CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
|
|
}
|
|
|
|
static void tegra30_disable_cpu_clock(u32 cpu)
|
|
{
|
|
|
|
unsigned int reg;
|
|
|
|
reg = readl(reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
|
|
writel(reg | CPU_CLOCK(cpu),
|
|
reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static bool tegra30_cpu_rail_off_ready(void)
|
|
{
|
|
unsigned int cpu_rst_status;
|
|
int cpu_pwr_status;
|
|
|
|
cpu_rst_status = readl(reg_clk_base +
|
|
TEGRA30_CLK_RST_CONTROLLER_CPU_CMPLX_STATUS);
|
|
cpu_pwr_status = tegra_powergate_is_powered(TEGRA_POWERGATE_CPU1) ||
|
|
tegra_powergate_is_powered(TEGRA_POWERGATE_CPU2) ||
|
|
tegra_powergate_is_powered(TEGRA_POWERGATE_CPU3);
|
|
|
|
if (((cpu_rst_status & 0xE) != 0xE) || cpu_pwr_status)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static void tegra30_cpu_clock_suspend(void)
|
|
{
|
|
/* switch coresite to clk_m, save off original source */
|
|
tegra30_cpu_clk_sctx.clk_csite_src =
|
|
readl(reg_clk_base + CLK_RESET_SOURCE_CSITE);
|
|
writel(3<<30, reg_clk_base + CLK_RESET_SOURCE_CSITE);
|
|
|
|
tegra30_cpu_clk_sctx.cpu_burst =
|
|
readl(reg_clk_base + CLK_RESET_CCLK_BURST);
|
|
tegra30_cpu_clk_sctx.pllx_base =
|
|
readl(reg_clk_base + CLK_RESET_PLLX_BASE);
|
|
tegra30_cpu_clk_sctx.pllx_misc =
|
|
readl(reg_clk_base + CLK_RESET_PLLX_MISC);
|
|
tegra30_cpu_clk_sctx.cclk_divider =
|
|
readl(reg_clk_base + CLK_RESET_CCLK_DIVIDER);
|
|
}
|
|
|
|
static void tegra30_cpu_clock_resume(void)
|
|
{
|
|
unsigned int reg, policy;
|
|
|
|
/* Is CPU complex already running on PLLX? */
|
|
reg = readl(reg_clk_base + CLK_RESET_CCLK_BURST);
|
|
policy = (reg >> CLK_RESET_CCLK_BURST_POLICY_SHIFT) & 0xF;
|
|
|
|
if (policy == CLK_RESET_CCLK_IDLE_POLICY)
|
|
reg = (reg >> CLK_RESET_CCLK_IDLE_POLICY_SHIFT) & 0xF;
|
|
else if (policy == CLK_RESET_CCLK_RUN_POLICY)
|
|
reg = (reg >> CLK_RESET_CCLK_RUN_POLICY_SHIFT) & 0xF;
|
|
else
|
|
BUG();
|
|
|
|
if (reg != CLK_RESET_CCLK_BURST_POLICY_PLLX) {
|
|
/* restore PLLX settings if CPU is on different PLL */
|
|
writel(tegra30_cpu_clk_sctx.pllx_misc,
|
|
reg_clk_base + CLK_RESET_PLLX_MISC);
|
|
writel(tegra30_cpu_clk_sctx.pllx_base,
|
|
reg_clk_base + CLK_RESET_PLLX_BASE);
|
|
|
|
/* wait for PLL stabilization if PLLX was enabled */
|
|
if (tegra30_cpu_clk_sctx.pllx_base & (1 << 30))
|
|
udelay(300);
|
|
}
|
|
|
|
/*
|
|
* Restore original burst policy setting for calls resulting from CPU
|
|
* LP2 in idle or system suspend.
|
|
*/
|
|
writel(tegra30_cpu_clk_sctx.cclk_divider,
|
|
reg_clk_base + CLK_RESET_CCLK_DIVIDER);
|
|
writel(tegra30_cpu_clk_sctx.cpu_burst,
|
|
reg_clk_base + CLK_RESET_CCLK_BURST);
|
|
|
|
writel(tegra30_cpu_clk_sctx.clk_csite_src,
|
|
reg_clk_base + CLK_RESET_SOURCE_CSITE);
|
|
}
|
|
#endif
|
|
|
|
static struct tegra_cpu_car_ops tegra30_cpu_car_ops = {
|
|
.wait_for_reset = tegra30_wait_cpu_in_reset,
|
|
.put_in_reset = tegra30_put_cpu_in_reset,
|
|
.out_of_reset = tegra30_cpu_out_of_reset,
|
|
.enable_clock = tegra30_enable_cpu_clock,
|
|
.disable_clock = tegra30_disable_cpu_clock,
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.rail_off_ready = tegra30_cpu_rail_off_ready,
|
|
.suspend = tegra30_cpu_clock_suspend,
|
|
.resume = tegra30_cpu_clock_resume,
|
|
#endif
|
|
};
|
|
|
|
void __init tegra30_cpu_car_ops_init(void)
|
|
{
|
|
tegra_cpu_car_ops = &tegra30_cpu_car_ops;
|
|
}
|