1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
527 lines
14 KiB
C
527 lines
14 KiB
C
/*
|
|
* drivers/net/gianfar_ethtool.c
|
|
*
|
|
* Gianfar Ethernet Driver
|
|
* Ethtool support for Gianfar Enet
|
|
* Based on e1000 ethtool support
|
|
*
|
|
* Author: Andy Fleming
|
|
* Maintainer: Kumar Gala (kumar.gala@freescale.com)
|
|
*
|
|
* Copyright (c) 2003,2004 Freescale Semiconductor, Inc.
|
|
*
|
|
* This software may be used and distributed according to
|
|
* the terms of the GNU Public License, Version 2, incorporated herein
|
|
* by reference.
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/mm.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/uaccess.h>
|
|
#include <linux/module.h>
|
|
#include <linux/version.h>
|
|
#include <linux/crc32.h>
|
|
#include <asm/types.h>
|
|
#include <asm/uaccess.h>
|
|
#include <linux/ethtool.h>
|
|
|
|
#include "gianfar.h"
|
|
|
|
#define is_power_of_2(x) ((x) != 0 && (((x) & ((x) - 1)) == 0))
|
|
|
|
extern int startup_gfar(struct net_device *dev);
|
|
extern void stop_gfar(struct net_device *dev);
|
|
extern void gfar_receive(int irq, void *dev_id, struct pt_regs *regs);
|
|
|
|
void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy,
|
|
u64 * buf);
|
|
void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf);
|
|
int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals);
|
|
int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals);
|
|
void gfar_gringparam(struct net_device *dev, struct ethtool_ringparam *rvals);
|
|
int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rvals);
|
|
void gfar_gdrvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo);
|
|
|
|
static char stat_gstrings[][ETH_GSTRING_LEN] = {
|
|
"rx-dropped-by-kernel",
|
|
"rx-large-frame-errors",
|
|
"rx-short-frame-errors",
|
|
"rx-non-octet-errors",
|
|
"rx-crc-errors",
|
|
"rx-overrun-errors",
|
|
"rx-busy-errors",
|
|
"rx-babbling-errors",
|
|
"rx-truncated-frames",
|
|
"ethernet-bus-error",
|
|
"tx-babbling-errors",
|
|
"tx-underrun-errors",
|
|
"rx-skb-missing-errors",
|
|
"tx-timeout-errors",
|
|
"tx-rx-64-frames",
|
|
"tx-rx-65-127-frames",
|
|
"tx-rx-128-255-frames",
|
|
"tx-rx-256-511-frames",
|
|
"tx-rx-512-1023-frames",
|
|
"tx-rx-1024-1518-frames",
|
|
"tx-rx-1519-1522-good-vlan",
|
|
"rx-bytes",
|
|
"rx-packets",
|
|
"rx-fcs-errors",
|
|
"receive-multicast-packet",
|
|
"receive-broadcast-packet",
|
|
"rx-control-frame-packets",
|
|
"rx-pause-frame-packets",
|
|
"rx-unknown-op-code",
|
|
"rx-alignment-error",
|
|
"rx-frame-length-error",
|
|
"rx-code-error",
|
|
"rx-carrier-sense-error",
|
|
"rx-undersize-packets",
|
|
"rx-oversize-packets",
|
|
"rx-fragmented-frames",
|
|
"rx-jabber-frames",
|
|
"rx-dropped-frames",
|
|
"tx-byte-counter",
|
|
"tx-packets",
|
|
"tx-multicast-packets",
|
|
"tx-broadcast-packets",
|
|
"tx-pause-control-frames",
|
|
"tx-deferral-packets",
|
|
"tx-excessive-deferral-packets",
|
|
"tx-single-collision-packets",
|
|
"tx-multiple-collision-packets",
|
|
"tx-late-collision-packets",
|
|
"tx-excessive-collision-packets",
|
|
"tx-total-collision",
|
|
"reserved",
|
|
"tx-dropped-frames",
|
|
"tx-jabber-frames",
|
|
"tx-fcs-errors",
|
|
"tx-control-frames",
|
|
"tx-oversize-frames",
|
|
"tx-undersize-frames",
|
|
"tx-fragmented-frames",
|
|
};
|
|
|
|
/* Fill in an array of 64-bit statistics from various sources.
|
|
* This array will be appended to the end of the ethtool_stats
|
|
* structure, and returned to user space
|
|
*/
|
|
void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy, u64 * buf)
|
|
{
|
|
int i;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
u32 *rmon = (u32 *) & priv->regs->rmon;
|
|
u64 *extra = (u64 *) & priv->extra_stats;
|
|
struct gfar_stats *stats = (struct gfar_stats *) buf;
|
|
|
|
for (i = 0; i < GFAR_RMON_LEN; i++) {
|
|
stats->rmon[i] = (u64) (rmon[i]);
|
|
}
|
|
|
|
for (i = 0; i < GFAR_EXTRA_STATS_LEN; i++) {
|
|
stats->extra[i] = extra[i];
|
|
}
|
|
}
|
|
|
|
/* Returns the number of stats (and their corresponding strings) */
|
|
int gfar_stats_count(struct net_device *dev)
|
|
{
|
|
return GFAR_STATS_LEN;
|
|
}
|
|
|
|
void gfar_gstrings_normon(struct net_device *dev, u32 stringset, u8 * buf)
|
|
{
|
|
memcpy(buf, stat_gstrings, GFAR_EXTRA_STATS_LEN * ETH_GSTRING_LEN);
|
|
}
|
|
|
|
void gfar_fill_stats_normon(struct net_device *dev,
|
|
struct ethtool_stats *dummy, u64 * buf)
|
|
{
|
|
int i;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
u64 *extra = (u64 *) & priv->extra_stats;
|
|
|
|
for (i = 0; i < GFAR_EXTRA_STATS_LEN; i++) {
|
|
buf[i] = extra[i];
|
|
}
|
|
}
|
|
|
|
|
|
int gfar_stats_count_normon(struct net_device *dev)
|
|
{
|
|
return GFAR_EXTRA_STATS_LEN;
|
|
}
|
|
/* Fills in the drvinfo structure with some basic info */
|
|
void gfar_gdrvinfo(struct net_device *dev, struct
|
|
ethtool_drvinfo *drvinfo)
|
|
{
|
|
strncpy(drvinfo->driver, DRV_NAME, GFAR_INFOSTR_LEN);
|
|
strncpy(drvinfo->version, gfar_driver_version, GFAR_INFOSTR_LEN);
|
|
strncpy(drvinfo->fw_version, "N/A", GFAR_INFOSTR_LEN);
|
|
strncpy(drvinfo->bus_info, "N/A", GFAR_INFOSTR_LEN);
|
|
drvinfo->n_stats = GFAR_STATS_LEN;
|
|
drvinfo->testinfo_len = 0;
|
|
drvinfo->regdump_len = 0;
|
|
drvinfo->eedump_len = 0;
|
|
}
|
|
|
|
/* Return the current settings in the ethtool_cmd structure */
|
|
int gfar_gsettings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
uint gigabit_support =
|
|
priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
|
|
SUPPORTED_1000baseT_Full : 0;
|
|
uint gigabit_advert =
|
|
priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
|
|
ADVERTISED_1000baseT_Full: 0;
|
|
|
|
cmd->supported = (SUPPORTED_10baseT_Half
|
|
| SUPPORTED_100baseT_Half
|
|
| SUPPORTED_100baseT_Full
|
|
| gigabit_support | SUPPORTED_Autoneg);
|
|
|
|
/* For now, we always advertise everything */
|
|
cmd->advertising = (ADVERTISED_10baseT_Half
|
|
| ADVERTISED_100baseT_Half
|
|
| ADVERTISED_100baseT_Full
|
|
| gigabit_advert | ADVERTISED_Autoneg);
|
|
|
|
cmd->speed = priv->mii_info->speed;
|
|
cmd->duplex = priv->mii_info->duplex;
|
|
cmd->port = PORT_MII;
|
|
cmd->phy_address = priv->mii_info->mii_id;
|
|
cmd->transceiver = XCVR_EXTERNAL;
|
|
cmd->autoneg = AUTONEG_ENABLE;
|
|
cmd->maxtxpkt = priv->txcount;
|
|
cmd->maxrxpkt = priv->rxcount;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Return the length of the register structure */
|
|
int gfar_reglen(struct net_device *dev)
|
|
{
|
|
return sizeof (struct gfar);
|
|
}
|
|
|
|
/* Return a dump of the GFAR register space */
|
|
void gfar_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
|
|
{
|
|
int i;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
u32 *theregs = (u32 *) priv->regs;
|
|
u32 *buf = (u32 *) regbuf;
|
|
|
|
for (i = 0; i < sizeof (struct gfar) / sizeof (u32); i++)
|
|
buf[i] = theregs[i];
|
|
}
|
|
|
|
/* Fill in a buffer with the strings which correspond to the
|
|
* stats */
|
|
void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf)
|
|
{
|
|
memcpy(buf, stat_gstrings, GFAR_STATS_LEN * ETH_GSTRING_LEN);
|
|
}
|
|
|
|
/* Convert microseconds to ethernet clock ticks, which changes
|
|
* depending on what speed the controller is running at */
|
|
static unsigned int gfar_usecs2ticks(struct gfar_private *priv, unsigned int usecs)
|
|
{
|
|
unsigned int count;
|
|
|
|
/* The timer is different, depending on the interface speed */
|
|
switch (priv->mii_info->speed) {
|
|
case 1000:
|
|
count = GFAR_GBIT_TIME;
|
|
break;
|
|
case 100:
|
|
count = GFAR_100_TIME;
|
|
break;
|
|
case 10:
|
|
default:
|
|
count = GFAR_10_TIME;
|
|
break;
|
|
}
|
|
|
|
/* Make sure we return a number greater than 0
|
|
* if usecs > 0 */
|
|
return ((usecs * 1000 + count - 1) / count);
|
|
}
|
|
|
|
/* Convert ethernet clock ticks to microseconds */
|
|
static unsigned int gfar_ticks2usecs(struct gfar_private *priv, unsigned int ticks)
|
|
{
|
|
unsigned int count;
|
|
|
|
/* The timer is different, depending on the interface speed */
|
|
switch (priv->mii_info->speed) {
|
|
case 1000:
|
|
count = GFAR_GBIT_TIME;
|
|
break;
|
|
case 100:
|
|
count = GFAR_100_TIME;
|
|
break;
|
|
case 10:
|
|
default:
|
|
count = GFAR_10_TIME;
|
|
break;
|
|
}
|
|
|
|
/* Make sure we return a number greater than 0 */
|
|
/* if ticks is > 0 */
|
|
return ((ticks * count) / 1000);
|
|
}
|
|
|
|
/* Get the coalescing parameters, and put them in the cvals
|
|
* structure. */
|
|
int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
|
|
cvals->rx_coalesce_usecs = gfar_ticks2usecs(priv, priv->rxtime);
|
|
cvals->rx_max_coalesced_frames = priv->rxcount;
|
|
|
|
cvals->tx_coalesce_usecs = gfar_ticks2usecs(priv, priv->txtime);
|
|
cvals->tx_max_coalesced_frames = priv->txcount;
|
|
|
|
cvals->use_adaptive_rx_coalesce = 0;
|
|
cvals->use_adaptive_tx_coalesce = 0;
|
|
|
|
cvals->pkt_rate_low = 0;
|
|
cvals->rx_coalesce_usecs_low = 0;
|
|
cvals->rx_max_coalesced_frames_low = 0;
|
|
cvals->tx_coalesce_usecs_low = 0;
|
|
cvals->tx_max_coalesced_frames_low = 0;
|
|
|
|
/* When the packet rate is below pkt_rate_high but above
|
|
* pkt_rate_low (both measured in packets per second) the
|
|
* normal {rx,tx}_* coalescing parameters are used.
|
|
*/
|
|
|
|
/* When the packet rate is (measured in packets per second)
|
|
* is above pkt_rate_high, the {rx,tx}_*_high parameters are
|
|
* used.
|
|
*/
|
|
cvals->pkt_rate_high = 0;
|
|
cvals->rx_coalesce_usecs_high = 0;
|
|
cvals->rx_max_coalesced_frames_high = 0;
|
|
cvals->tx_coalesce_usecs_high = 0;
|
|
cvals->tx_max_coalesced_frames_high = 0;
|
|
|
|
/* How often to do adaptive coalescing packet rate sampling,
|
|
* measured in seconds. Must not be zero.
|
|
*/
|
|
cvals->rate_sample_interval = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Change the coalescing values.
|
|
* Both cvals->*_usecs and cvals->*_frames have to be > 0
|
|
* in order for coalescing to be active
|
|
*/
|
|
int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
|
|
/* Set up rx coalescing */
|
|
if ((cvals->rx_coalesce_usecs == 0) ||
|
|
(cvals->rx_max_coalesced_frames == 0))
|
|
priv->rxcoalescing = 0;
|
|
else
|
|
priv->rxcoalescing = 1;
|
|
|
|
priv->rxtime = gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs);
|
|
priv->rxcount = cvals->rx_max_coalesced_frames;
|
|
|
|
/* Set up tx coalescing */
|
|
if ((cvals->tx_coalesce_usecs == 0) ||
|
|
(cvals->tx_max_coalesced_frames == 0))
|
|
priv->txcoalescing = 0;
|
|
else
|
|
priv->txcoalescing = 1;
|
|
|
|
priv->txtime = gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs);
|
|
priv->txcount = cvals->tx_max_coalesced_frames;
|
|
|
|
if (priv->rxcoalescing)
|
|
gfar_write(&priv->regs->rxic,
|
|
mk_ic_value(priv->rxcount, priv->rxtime));
|
|
else
|
|
gfar_write(&priv->regs->rxic, 0);
|
|
|
|
if (priv->txcoalescing)
|
|
gfar_write(&priv->regs->txic,
|
|
mk_ic_value(priv->txcount, priv->txtime));
|
|
else
|
|
gfar_write(&priv->regs->txic, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Fills in rvals with the current ring parameters. Currently,
|
|
* rx, rx_mini, and rx_jumbo rings are the same size, as mini and
|
|
* jumbo are ignored by the driver */
|
|
void gfar_gringparam(struct net_device *dev, struct ethtool_ringparam *rvals)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
|
|
rvals->rx_max_pending = GFAR_RX_MAX_RING_SIZE;
|
|
rvals->rx_mini_max_pending = GFAR_RX_MAX_RING_SIZE;
|
|
rvals->rx_jumbo_max_pending = GFAR_RX_MAX_RING_SIZE;
|
|
rvals->tx_max_pending = GFAR_TX_MAX_RING_SIZE;
|
|
|
|
/* Values changeable by the user. The valid values are
|
|
* in the range 1 to the "*_max_pending" counterpart above.
|
|
*/
|
|
rvals->rx_pending = priv->rx_ring_size;
|
|
rvals->rx_mini_pending = priv->rx_ring_size;
|
|
rvals->rx_jumbo_pending = priv->rx_ring_size;
|
|
rvals->tx_pending = priv->tx_ring_size;
|
|
}
|
|
|
|
/* Change the current ring parameters, stopping the controller if
|
|
* necessary so that we don't mess things up while we're in
|
|
* motion. We wait for the ring to be clean before reallocating
|
|
* the rings. */
|
|
int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rvals)
|
|
{
|
|
u32 tempval;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
int err = 0;
|
|
|
|
if (rvals->rx_pending > GFAR_RX_MAX_RING_SIZE)
|
|
return -EINVAL;
|
|
|
|
if (!is_power_of_2(rvals->rx_pending)) {
|
|
printk("%s: Ring sizes must be a power of 2\n",
|
|
dev->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (rvals->tx_pending > GFAR_TX_MAX_RING_SIZE)
|
|
return -EINVAL;
|
|
|
|
if (!is_power_of_2(rvals->tx_pending)) {
|
|
printk("%s: Ring sizes must be a power of 2\n",
|
|
dev->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Stop the controller so we don't rx any more frames */
|
|
/* But first, make sure we clear the bits */
|
|
tempval = gfar_read(&priv->regs->dmactrl);
|
|
tempval &= ~(DMACTRL_GRS | DMACTRL_GTS);
|
|
gfar_write(&priv->regs->dmactrl, tempval);
|
|
|
|
tempval = gfar_read(&priv->regs->dmactrl);
|
|
tempval |= (DMACTRL_GRS | DMACTRL_GTS);
|
|
gfar_write(&priv->regs->dmactrl, tempval);
|
|
|
|
while (!(gfar_read(&priv->regs->ievent) & (IEVENT_GRSC | IEVENT_GTSC)))
|
|
cpu_relax();
|
|
|
|
/* Note that rx is not clean right now */
|
|
priv->rxclean = 0;
|
|
|
|
if (dev->flags & IFF_UP) {
|
|
/* Tell the driver to process the rest of the frames */
|
|
gfar_receive(0, (void *) dev, NULL);
|
|
|
|
/* Now wait for it to be done */
|
|
wait_event_interruptible(priv->rxcleanupq, priv->rxclean);
|
|
|
|
/* Ok, all packets have been handled. Now we bring it down,
|
|
* change the ring size, and bring it up */
|
|
|
|
stop_gfar(dev);
|
|
}
|
|
|
|
priv->rx_ring_size = rvals->rx_pending;
|
|
priv->tx_ring_size = rvals->tx_pending;
|
|
|
|
if (dev->flags & IFF_UP)
|
|
err = startup_gfar(dev);
|
|
|
|
return err;
|
|
}
|
|
|
|
struct ethtool_ops gfar_ethtool_ops = {
|
|
.get_settings = gfar_gsettings,
|
|
.get_drvinfo = gfar_gdrvinfo,
|
|
.get_regs_len = gfar_reglen,
|
|
.get_regs = gfar_get_regs,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_coalesce = gfar_gcoalesce,
|
|
.set_coalesce = gfar_scoalesce,
|
|
.get_ringparam = gfar_gringparam,
|
|
.set_ringparam = gfar_sringparam,
|
|
.get_strings = gfar_gstrings,
|
|
.get_stats_count = gfar_stats_count,
|
|
.get_ethtool_stats = gfar_fill_stats,
|
|
};
|
|
|
|
struct ethtool_ops gfar_normon_nocoalesce_ethtool_ops = {
|
|
.get_settings = gfar_gsettings,
|
|
.get_drvinfo = gfar_gdrvinfo,
|
|
.get_regs_len = gfar_reglen,
|
|
.get_regs = gfar_get_regs,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_ringparam = gfar_gringparam,
|
|
.set_ringparam = gfar_sringparam,
|
|
.get_strings = gfar_gstrings_normon,
|
|
.get_stats_count = gfar_stats_count_normon,
|
|
.get_ethtool_stats = gfar_fill_stats_normon,
|
|
};
|
|
|
|
struct ethtool_ops gfar_nocoalesce_ethtool_ops = {
|
|
.get_settings = gfar_gsettings,
|
|
.get_drvinfo = gfar_gdrvinfo,
|
|
.get_regs_len = gfar_reglen,
|
|
.get_regs = gfar_get_regs,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_ringparam = gfar_gringparam,
|
|
.set_ringparam = gfar_sringparam,
|
|
.get_strings = gfar_gstrings,
|
|
.get_stats_count = gfar_stats_count,
|
|
.get_ethtool_stats = gfar_fill_stats,
|
|
};
|
|
|
|
struct ethtool_ops gfar_normon_ethtool_ops = {
|
|
.get_settings = gfar_gsettings,
|
|
.get_drvinfo = gfar_gdrvinfo,
|
|
.get_regs_len = gfar_reglen,
|
|
.get_regs = gfar_get_regs,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_coalesce = gfar_gcoalesce,
|
|
.set_coalesce = gfar_scoalesce,
|
|
.get_ringparam = gfar_gringparam,
|
|
.set_ringparam = gfar_sringparam,
|
|
.get_strings = gfar_gstrings_normon,
|
|
.get_stats_count = gfar_stats_count_normon,
|
|
.get_ethtool_stats = gfar_fill_stats_normon,
|
|
};
|
|
|
|
struct ethtool_ops *gfar_op_array[] = {
|
|
&gfar_ethtool_ops,
|
|
&gfar_normon_ethtool_ops,
|
|
&gfar_nocoalesce_ethtool_ops,
|
|
&gfar_normon_nocoalesce_ethtool_ops
|
|
};
|