5391473f7b
Patch from Lennert Buytenhek Since we have to use XCB=101 instead of XCB=000 on the ixp2400 to prevent it from regularly falling over, and since we have to deal with manual write buffer flushing because of that, we might as well use XCB=101 on all ixp2000 platforms since it's faster than XCB=000. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
522 lines
15 KiB
C
522 lines
15 KiB
C
/*
|
|
* arch/arm/mach-ixp2000/core.c
|
|
*
|
|
* Common routines used by all IXP2400/2800 based platforms.
|
|
*
|
|
* Author: Deepak Saxena <dsaxena@plexity.net>
|
|
*
|
|
* Copyright 2004 (C) MontaVista Software, Inc.
|
|
*
|
|
* Based on work Copyright (C) 2002-2003 Intel Corporation
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/serial_8250.h>
|
|
#include <linux/mm.h>
|
|
|
|
#include <asm/types.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/system.h>
|
|
#include <asm/tlbflush.h>
|
|
#include <asm/pgtable.h>
|
|
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include <asm/arch/gpio.h>
|
|
|
|
static DEFINE_SPINLOCK(ixp2000_slowport_lock);
|
|
static unsigned long ixp2000_slowport_irq_flags;
|
|
|
|
/*************************************************************************
|
|
* Slowport access routines
|
|
*************************************************************************/
|
|
void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg *old_cfg)
|
|
{
|
|
spin_lock_irqsave(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags);
|
|
|
|
old_cfg->CCR = *IXP2000_SLOWPORT_CCR;
|
|
old_cfg->WTC = *IXP2000_SLOWPORT_WTC2;
|
|
old_cfg->RTC = *IXP2000_SLOWPORT_RTC2;
|
|
old_cfg->PCR = *IXP2000_SLOWPORT_PCR;
|
|
old_cfg->ADC = *IXP2000_SLOWPORT_ADC;
|
|
|
|
ixp2000_reg_write(IXP2000_SLOWPORT_CCR, new_cfg->CCR);
|
|
ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, new_cfg->WTC);
|
|
ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, new_cfg->RTC);
|
|
ixp2000_reg_write(IXP2000_SLOWPORT_PCR, new_cfg->PCR);
|
|
ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, new_cfg->ADC);
|
|
}
|
|
|
|
void ixp2000_release_slowport(struct slowport_cfg *old_cfg)
|
|
{
|
|
ixp2000_reg_write(IXP2000_SLOWPORT_CCR, old_cfg->CCR);
|
|
ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, old_cfg->WTC);
|
|
ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, old_cfg->RTC);
|
|
ixp2000_reg_write(IXP2000_SLOWPORT_PCR, old_cfg->PCR);
|
|
ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, old_cfg->ADC);
|
|
|
|
spin_unlock_irqrestore(&ixp2000_slowport_lock,
|
|
ixp2000_slowport_irq_flags);
|
|
}
|
|
|
|
/*************************************************************************
|
|
* Chip specific mappings shared by all IXP2000 systems
|
|
*************************************************************************/
|
|
static struct map_desc ixp2000_io_desc[] __initdata = {
|
|
{
|
|
.virtual = IXP2000_CAP_VIRT_BASE,
|
|
.pfn = __phys_to_pfn(IXP2000_CAP_PHYS_BASE),
|
|
.length = IXP2000_CAP_SIZE,
|
|
.type = MT_IXP2000_DEVICE,
|
|
}, {
|
|
.virtual = IXP2000_INTCTL_VIRT_BASE,
|
|
.pfn = __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE),
|
|
.length = IXP2000_INTCTL_SIZE,
|
|
.type = MT_IXP2000_DEVICE,
|
|
}, {
|
|
.virtual = IXP2000_PCI_CREG_VIRT_BASE,
|
|
.pfn = __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE),
|
|
.length = IXP2000_PCI_CREG_SIZE,
|
|
.type = MT_IXP2000_DEVICE,
|
|
}, {
|
|
.virtual = IXP2000_PCI_CSR_VIRT_BASE,
|
|
.pfn = __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE),
|
|
.length = IXP2000_PCI_CSR_SIZE,
|
|
.type = MT_IXP2000_DEVICE,
|
|
}, {
|
|
.virtual = IXP2000_MSF_VIRT_BASE,
|
|
.pfn = __phys_to_pfn(IXP2000_MSF_PHYS_BASE),
|
|
.length = IXP2000_MSF_SIZE,
|
|
.type = MT_IXP2000_DEVICE,
|
|
}, {
|
|
.virtual = IXP2000_PCI_IO_VIRT_BASE,
|
|
.pfn = __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE),
|
|
.length = IXP2000_PCI_IO_SIZE,
|
|
.type = MT_IXP2000_DEVICE,
|
|
}, {
|
|
.virtual = IXP2000_PCI_CFG0_VIRT_BASE,
|
|
.pfn = __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE),
|
|
.length = IXP2000_PCI_CFG0_SIZE,
|
|
.type = MT_IXP2000_DEVICE,
|
|
}, {
|
|
.virtual = IXP2000_PCI_CFG1_VIRT_BASE,
|
|
.pfn = __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE),
|
|
.length = IXP2000_PCI_CFG1_SIZE,
|
|
.type = MT_IXP2000_DEVICE,
|
|
}
|
|
};
|
|
|
|
void __init ixp2000_map_io(void)
|
|
{
|
|
/*
|
|
* On IXP2400 CPUs we need to use MT_IXP2000_DEVICE so that
|
|
* XCB=101 (to avoid triggering erratum #66), and given that
|
|
* this mode speeds up I/O accesses and we have write buffer
|
|
* flushes in the right places anyway, it doesn't hurt to use
|
|
* XCB=101 for all IXP2000s.
|
|
*/
|
|
iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc));
|
|
|
|
/* Set slowport to 8-bit mode. */
|
|
ixp2000_reg_wrb(IXP2000_SLOWPORT_FRM, 1);
|
|
}
|
|
|
|
|
|
/*************************************************************************
|
|
* Serial port support for IXP2000
|
|
*************************************************************************/
|
|
static struct plat_serial8250_port ixp2000_serial_port[] = {
|
|
{
|
|
.mapbase = IXP2000_UART_PHYS_BASE,
|
|
.membase = (char *)(IXP2000_UART_VIRT_BASE + 3),
|
|
.irq = IRQ_IXP2000_UART,
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 2,
|
|
.uartclk = 50000000,
|
|
},
|
|
{ },
|
|
};
|
|
|
|
static struct resource ixp2000_uart_resource = {
|
|
.start = IXP2000_UART_PHYS_BASE,
|
|
.end = IXP2000_UART_PHYS_BASE + 0x1f,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device ixp2000_serial_device = {
|
|
.name = "serial8250",
|
|
.id = PLAT8250_DEV_PLATFORM,
|
|
.dev = {
|
|
.platform_data = ixp2000_serial_port,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &ixp2000_uart_resource,
|
|
};
|
|
|
|
void __init ixp2000_uart_init(void)
|
|
{
|
|
platform_device_register(&ixp2000_serial_device);
|
|
}
|
|
|
|
|
|
/*************************************************************************
|
|
* Timer-tick functions for IXP2000
|
|
*************************************************************************/
|
|
static unsigned ticks_per_jiffy;
|
|
static unsigned ticks_per_usec;
|
|
static unsigned next_jiffy_time;
|
|
static volatile unsigned long *missing_jiffy_timer_csr;
|
|
|
|
unsigned long ixp2000_gettimeoffset (void)
|
|
{
|
|
unsigned long offset;
|
|
|
|
offset = next_jiffy_time - *missing_jiffy_timer_csr;
|
|
|
|
return offset / ticks_per_usec;
|
|
}
|
|
|
|
static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
|
|
{
|
|
write_seqlock(&xtime_lock);
|
|
|
|
/* clear timer 1 */
|
|
ixp2000_reg_wrb(IXP2000_T1_CLR, 1);
|
|
|
|
while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) {
|
|
timer_tick(regs);
|
|
next_jiffy_time -= ticks_per_jiffy;
|
|
}
|
|
|
|
write_sequnlock(&xtime_lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct irqaction ixp2000_timer_irq = {
|
|
.name = "IXP2000 Timer Tick",
|
|
.flags = SA_INTERRUPT | SA_TIMER,
|
|
.handler = ixp2000_timer_interrupt,
|
|
};
|
|
|
|
void __init ixp2000_init_time(unsigned long tick_rate)
|
|
{
|
|
ticks_per_jiffy = (tick_rate + HZ/2) / HZ;
|
|
ticks_per_usec = tick_rate / 1000000;
|
|
|
|
/*
|
|
* We use timer 1 as our timer interrupt.
|
|
*/
|
|
ixp2000_reg_write(IXP2000_T1_CLR, 0);
|
|
ixp2000_reg_write(IXP2000_T1_CLD, ticks_per_jiffy - 1);
|
|
ixp2000_reg_write(IXP2000_T1_CTL, (1 << 7));
|
|
|
|
/*
|
|
* We use a second timer as a monotonic counter for tracking
|
|
* missed jiffies. The IXP2000 has four timers, but if we're
|
|
* on an A-step IXP2800, timer 2 and 3 don't work, so on those
|
|
* chips we use timer 4. Timer 4 is the only timer that can
|
|
* be used for the watchdog, so we use timer 2 if we're on a
|
|
* non-buggy chip.
|
|
*/
|
|
if ((*IXP2000_PRODUCT_ID & 0x001ffef0) == 0x00000000) {
|
|
printk(KERN_INFO "Enabling IXP2800 erratum #25 workaround\n");
|
|
|
|
ixp2000_reg_write(IXP2000_T4_CLR, 0);
|
|
ixp2000_reg_write(IXP2000_T4_CLD, -1);
|
|
ixp2000_reg_wrb(IXP2000_T4_CTL, (1 << 7));
|
|
missing_jiffy_timer_csr = IXP2000_T4_CSR;
|
|
} else {
|
|
ixp2000_reg_write(IXP2000_T2_CLR, 0);
|
|
ixp2000_reg_write(IXP2000_T2_CLD, -1);
|
|
ixp2000_reg_wrb(IXP2000_T2_CTL, (1 << 7));
|
|
missing_jiffy_timer_csr = IXP2000_T2_CSR;
|
|
}
|
|
next_jiffy_time = 0xffffffff;
|
|
|
|
/* register for interrupt */
|
|
setup_irq(IRQ_IXP2000_TIMER1, &ixp2000_timer_irq);
|
|
}
|
|
|
|
/*************************************************************************
|
|
* GPIO helpers
|
|
*************************************************************************/
|
|
static unsigned long GPIO_IRQ_falling_edge;
|
|
static unsigned long GPIO_IRQ_rising_edge;
|
|
static unsigned long GPIO_IRQ_level_low;
|
|
static unsigned long GPIO_IRQ_level_high;
|
|
|
|
static void update_gpio_int_csrs(void)
|
|
{
|
|
ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge);
|
|
ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge);
|
|
ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low);
|
|
ixp2000_reg_wrb(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
|
|
}
|
|
|
|
void gpio_line_config(int line, int direction)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
if (direction == GPIO_OUT) {
|
|
irq_desc[line + IRQ_IXP2000_GPIO0].valid = 0;
|
|
|
|
/* if it's an output, it ain't an interrupt anymore */
|
|
GPIO_IRQ_falling_edge &= ~(1 << line);
|
|
GPIO_IRQ_rising_edge &= ~(1 << line);
|
|
GPIO_IRQ_level_low &= ~(1 << line);
|
|
GPIO_IRQ_level_high &= ~(1 << line);
|
|
update_gpio_int_csrs();
|
|
|
|
ixp2000_reg_wrb(IXP2000_GPIO_PDSR, 1 << line);
|
|
} else if (direction == GPIO_IN) {
|
|
ixp2000_reg_wrb(IXP2000_GPIO_PDCR, 1 << line);
|
|
}
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
|
|
/*************************************************************************
|
|
* IRQ handling IXP2000
|
|
*************************************************************************/
|
|
static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
|
|
{
|
|
int i;
|
|
unsigned long status = *IXP2000_GPIO_INST;
|
|
|
|
for (i = 0; i <= 7; i++) {
|
|
if (status & (1<<i)) {
|
|
desc = irq_desc + i + IRQ_IXP2000_GPIO0;
|
|
desc_handle_irq(i + IRQ_IXP2000_GPIO0, desc, regs);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type)
|
|
{
|
|
int line = irq - IRQ_IXP2000_GPIO0;
|
|
|
|
/*
|
|
* First, configure this GPIO line as an input.
|
|
*/
|
|
ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line);
|
|
|
|
/*
|
|
* Then, set the proper trigger type.
|
|
*/
|
|
if (type & IRQT_FALLING)
|
|
GPIO_IRQ_falling_edge |= 1 << line;
|
|
else
|
|
GPIO_IRQ_falling_edge &= ~(1 << line);
|
|
if (type & IRQT_RISING)
|
|
GPIO_IRQ_rising_edge |= 1 << line;
|
|
else
|
|
GPIO_IRQ_rising_edge &= ~(1 << line);
|
|
if (type & IRQT_LOW)
|
|
GPIO_IRQ_level_low |= 1 << line;
|
|
else
|
|
GPIO_IRQ_level_low &= ~(1 << line);
|
|
if (type & IRQT_HIGH)
|
|
GPIO_IRQ_level_high |= 1 << line;
|
|
else
|
|
GPIO_IRQ_level_high &= ~(1 << line);
|
|
update_gpio_int_csrs();
|
|
|
|
/*
|
|
* Finally, mark the corresponding IRQ as valid.
|
|
*/
|
|
irq_desc[irq].valid = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ixp2000_GPIO_irq_mask_ack(unsigned int irq)
|
|
{
|
|
ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
|
|
|
|
ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
|
|
ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
|
|
ixp2000_reg_wrb(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0)));
|
|
}
|
|
|
|
static void ixp2000_GPIO_irq_mask(unsigned int irq)
|
|
{
|
|
ixp2000_reg_wrb(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
|
|
}
|
|
|
|
static void ixp2000_GPIO_irq_unmask(unsigned int irq)
|
|
{
|
|
ixp2000_reg_write(IXP2000_GPIO_INSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
|
|
}
|
|
|
|
static struct irqchip ixp2000_GPIO_irq_chip = {
|
|
.ack = ixp2000_GPIO_irq_mask_ack,
|
|
.mask = ixp2000_GPIO_irq_mask,
|
|
.unmask = ixp2000_GPIO_irq_unmask,
|
|
.set_type = ixp2000_GPIO_irq_type,
|
|
};
|
|
|
|
static void ixp2000_pci_irq_mask(unsigned int irq)
|
|
{
|
|
unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE;
|
|
if (irq == IRQ_IXP2000_PCIA)
|
|
ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26)));
|
|
else if (irq == IRQ_IXP2000_PCIB)
|
|
ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27)));
|
|
}
|
|
|
|
static void ixp2000_pci_irq_unmask(unsigned int irq)
|
|
{
|
|
unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE;
|
|
if (irq == IRQ_IXP2000_PCIA)
|
|
ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 26)));
|
|
else if (irq == IRQ_IXP2000_PCIB)
|
|
ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 27)));
|
|
}
|
|
|
|
/*
|
|
* Error interrupts. These are used extensively by the microengine drivers
|
|
*/
|
|
static void ixp2000_err_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
|
|
{
|
|
int i;
|
|
unsigned long status = *IXP2000_IRQ_ERR_STATUS;
|
|
|
|
for(i = 31; i >= 0; i--) {
|
|
if(status & (1 << i)) {
|
|
desc = irq_desc + IRQ_IXP2000_DRAM0_MIN_ERR + i;
|
|
desc->handle(IRQ_IXP2000_DRAM0_MIN_ERR + i, desc, regs);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void ixp2000_err_irq_mask(unsigned int irq)
|
|
{
|
|
ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_CLR,
|
|
(1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)));
|
|
}
|
|
|
|
static void ixp2000_err_irq_unmask(unsigned int irq)
|
|
{
|
|
ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_SET,
|
|
(1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)));
|
|
}
|
|
|
|
static struct irqchip ixp2000_err_irq_chip = {
|
|
.ack = ixp2000_err_irq_mask,
|
|
.mask = ixp2000_err_irq_mask,
|
|
.unmask = ixp2000_err_irq_unmask
|
|
};
|
|
|
|
static struct irqchip ixp2000_pci_irq_chip = {
|
|
.ack = ixp2000_pci_irq_mask,
|
|
.mask = ixp2000_pci_irq_mask,
|
|
.unmask = ixp2000_pci_irq_unmask
|
|
};
|
|
|
|
static void ixp2000_irq_mask(unsigned int irq)
|
|
{
|
|
ixp2000_reg_wrb(IXP2000_IRQ_ENABLE_CLR, (1 << irq));
|
|
}
|
|
|
|
static void ixp2000_irq_unmask(unsigned int irq)
|
|
{
|
|
ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq));
|
|
}
|
|
|
|
static struct irqchip ixp2000_irq_chip = {
|
|
.ack = ixp2000_irq_mask,
|
|
.mask = ixp2000_irq_mask,
|
|
.unmask = ixp2000_irq_unmask
|
|
};
|
|
|
|
void __init ixp2000_init_irq(void)
|
|
{
|
|
int irq;
|
|
|
|
/*
|
|
* Mask all sources
|
|
*/
|
|
ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, 0xffffffff);
|
|
ixp2000_reg_write(IXP2000_FIQ_ENABLE_CLR, 0xffffffff);
|
|
|
|
/* clear all GPIO edge/level detects */
|
|
ixp2000_reg_write(IXP2000_GPIO_REDR, 0);
|
|
ixp2000_reg_write(IXP2000_GPIO_FEDR, 0);
|
|
ixp2000_reg_write(IXP2000_GPIO_LSHR, 0);
|
|
ixp2000_reg_write(IXP2000_GPIO_LSLR, 0);
|
|
ixp2000_reg_write(IXP2000_GPIO_INCR, -1);
|
|
|
|
/* clear PCI interrupt sources */
|
|
ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, 0);
|
|
|
|
/*
|
|
* Certain bits in the IRQ status register of the
|
|
* IXP2000 are reserved. Instead of trying to map
|
|
* things non 1:1 from bit position to IRQ number,
|
|
* we mark the reserved IRQs as invalid. This makes
|
|
* our mask/unmask code much simpler.
|
|
*/
|
|
for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) {
|
|
if ((1 << irq) & IXP2000_VALID_IRQ_MASK) {
|
|
set_irq_chip(irq, &ixp2000_irq_chip);
|
|
set_irq_handler(irq, do_level_IRQ);
|
|
set_irq_flags(irq, IRQF_VALID);
|
|
} else set_irq_flags(irq, 0);
|
|
}
|
|
|
|
for (irq = IRQ_IXP2000_DRAM0_MIN_ERR; irq <= IRQ_IXP2000_SP_INT; irq++) {
|
|
if((1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) &
|
|
IXP2000_VALID_ERR_IRQ_MASK) {
|
|
set_irq_chip(irq, &ixp2000_err_irq_chip);
|
|
set_irq_handler(irq, do_level_IRQ);
|
|
set_irq_flags(irq, IRQF_VALID);
|
|
}
|
|
else
|
|
set_irq_flags(irq, 0);
|
|
}
|
|
set_irq_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler);
|
|
|
|
/*
|
|
* GPIO IRQs are invalid until someone sets the interrupt mode
|
|
* by calling set_irq_type().
|
|
*/
|
|
for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) {
|
|
set_irq_chip(irq, &ixp2000_GPIO_irq_chip);
|
|
set_irq_handler(irq, do_level_IRQ);
|
|
set_irq_flags(irq, 0);
|
|
}
|
|
set_irq_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler);
|
|
|
|
/*
|
|
* Enable PCI irqs. The actual PCI[AB] decoding is done in
|
|
* entry-macro.S, so we don't need a chained handler for the
|
|
* PCI interrupt source.
|
|
*/
|
|
ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << IRQ_IXP2000_PCI));
|
|
for (irq = IRQ_IXP2000_PCIA; irq <= IRQ_IXP2000_PCIB; irq++) {
|
|
set_irq_chip(irq, &ixp2000_pci_irq_chip);
|
|
set_irq_handler(irq, do_level_IRQ);
|
|
set_irq_flags(irq, IRQF_VALID);
|
|
}
|
|
}
|
|
|