kernel-fxtec-pro1x/include/target/target_core_base.h
Paolo Bonzini 32a8811ff1 target: support zero allocation length in REQUEST SENSE
Similar to INQUIRY and MODE SENSE, construct the sense data in a
buffer and later copy it to the scatterlist.  Do not do anything,
but still clear a pending unit attention condition, if the allocation
length is zero.

However, SPC tells us that "If a REQUEST SENSE command is terminated with
CHECK CONDITION status [and] the REQUEST SENSE command was received on
an I_T nexus with a pending unit attention condition (i.e., before the
device server reports CHECK CONDITION status), then the device server
shall not clear the pending unit attention condition."  Do the
transport_kmap_data_sg early to detect this case.

It also tells us "Device servers shall not adjust the additional sense
length to reflect truncation if the allocation length is less than the
sense data available", so do not do that!  Note that the err variable
is write-only.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-07 11:14:21 -07:00

912 lines
26 KiB
C

#ifndef TARGET_CORE_BASE_H
#define TARGET_CORE_BASE_H
#include <linux/in.h>
#include <linux/configfs.h>
#include <linux/dma-mapping.h>
#include <linux/blkdev.h>
#include <scsi/scsi_cmnd.h>
#include <net/sock.h>
#include <net/tcp.h>
#define TARGET_CORE_MOD_VERSION "v4.1.0-rc2-ml"
#define TARGET_CORE_VERSION TARGET_CORE_MOD_VERSION
/* Maximum Number of LUNs per Target Portal Group */
/* Don't raise above 511 or REPORT_LUNS needs to handle >1 page */
#define TRANSPORT_MAX_LUNS_PER_TPG 256
/*
* By default we use 32-byte CDBs in TCM Core and subsystem plugin code.
*
* Note that both include/scsi/scsi_cmnd.h:MAX_COMMAND_SIZE and
* include/linux/blkdev.h:BLOCK_MAX_CDB as of v2.6.36-rc4 still use
* 16-byte CDBs by default and require an extra allocation for
* 32-byte CDBs to because of legacy issues.
*
* Within TCM Core there are no such legacy limitiations, so we go ahead
* use 32-byte CDBs by default and use include/scsi/scsi.h:scsi_command_size()
* within all TCM Core and subsystem plugin code.
*/
#define TCM_MAX_COMMAND_SIZE 32
/*
* From include/scsi/scsi_cmnd.h:SCSI_SENSE_BUFFERSIZE, currently
* defined 96, but the real limit is 252 (or 260 including the header)
*/
#define TRANSPORT_SENSE_BUFFER SCSI_SENSE_BUFFERSIZE
/* Used by transport_send_check_condition_and_sense() */
#define SPC_SENSE_KEY_OFFSET 2
#define SPC_ADD_SENSE_LEN_OFFSET 7
#define SPC_ASC_KEY_OFFSET 12
#define SPC_ASCQ_KEY_OFFSET 13
#define TRANSPORT_IQN_LEN 224
/* Used by target_core_store_alua_lu_gp() and target_core_alua_lu_gp_show_attr_members() */
#define LU_GROUP_NAME_BUF 256
/* Used by core_alua_store_tg_pt_gp_info() and target_core_alua_tg_pt_gp_show_attr_members() */
#define TG_PT_GROUP_NAME_BUF 256
/* Used to parse VPD into struct t10_vpd */
#define VPD_TMP_BUF_SIZE 128
/* Used by transport_generic_cmd_sequencer() */
#define READ_BLOCK_LEN 6
#define READ_CAP_LEN 8
#define READ_POSITION_LEN 20
#define INQUIRY_LEN 36
/* Used by transport_get_inquiry_vpd_serial() */
#define INQUIRY_VPD_SERIAL_LEN 254
/* Used by transport_get_inquiry_vpd_device_ident() */
#define INQUIRY_VPD_DEVICE_IDENTIFIER_LEN 254
/* Attempts before moving from SHORT to LONG */
#define PYX_TRANSPORT_WINDOW_CLOSED_THRESHOLD 3
#define PYX_TRANSPORT_WINDOW_CLOSED_WAIT_SHORT 3 /* In milliseconds */
#define PYX_TRANSPORT_WINDOW_CLOSED_WAIT_LONG 10 /* In milliseconds */
#define PYX_TRANSPORT_STATUS_INTERVAL 5 /* In seconds */
/*
* struct se_subsystem_dev->su_dev_flags
*/
#define SDF_FIRMWARE_VPD_UNIT_SERIAL 0x00000001
#define SDF_EMULATED_VPD_UNIT_SERIAL 0x00000002
#define SDF_USING_UDEV_PATH 0x00000004
#define SDF_USING_ALIAS 0x00000008
/*
* struct se_device->dev_flags
*/
#define DF_SPC2_RESERVATIONS 0x00000001
#define DF_SPC2_RESERVATIONS_WITH_ISID 0x00000002
/* struct se_dev_attrib sanity values */
/* Default max_unmap_lba_count */
#define DA_MAX_UNMAP_LBA_COUNT 0
/* Default max_unmap_block_desc_count */
#define DA_MAX_UNMAP_BLOCK_DESC_COUNT 0
/* Default unmap_granularity */
#define DA_UNMAP_GRANULARITY_DEFAULT 0
/* Default unmap_granularity_alignment */
#define DA_UNMAP_GRANULARITY_ALIGNMENT_DEFAULT 0
/* Default max transfer length */
#define DA_FABRIC_MAX_SECTORS 8192
/* Emulation for Direct Page Out */
#define DA_EMULATE_DPO 0
/* Emulation for Forced Unit Access WRITEs */
#define DA_EMULATE_FUA_WRITE 1
/* Emulation for Forced Unit Access READs */
#define DA_EMULATE_FUA_READ 0
/* Emulation for WriteCache and SYNCHRONIZE_CACHE */
#define DA_EMULATE_WRITE_CACHE 0
/* Emulation for UNIT ATTENTION Interlock Control */
#define DA_EMULATE_UA_INTLLCK_CTRL 0
/* Emulation for TASK_ABORTED status (TAS) by default */
#define DA_EMULATE_TAS 1
/* Emulation for Thin Provisioning UNMAP using block/blk-lib.c:blkdev_issue_discard() */
#define DA_EMULATE_TPU 0
/*
* Emulation for Thin Provisioning WRITE_SAME w/ UNMAP=1 bit using
* block/blk-lib.c:blkdev_issue_discard()
*/
#define DA_EMULATE_TPWS 0
/* No Emulation for PSCSI by default */
#define DA_EMULATE_RESERVATIONS 0
/* No Emulation for PSCSI by default */
#define DA_EMULATE_ALUA 0
/* Enforce SCSI Initiator Port TransportID with 'ISID' for PR */
#define DA_ENFORCE_PR_ISIDS 1
#define DA_STATUS_MAX_SECTORS_MIN 16
#define DA_STATUS_MAX_SECTORS_MAX 8192
/* By default don't report non-rotating (solid state) medium */
#define DA_IS_NONROT 0
/* Queue Algorithm Modifier default for restricted reordering in control mode page */
#define DA_EMULATE_REST_REORD 0
#define SE_INQUIRY_BUF 512
#define SE_MODE_PAGE_BUF 512
#define SE_SENSE_BUF 96
/* struct se_hba->hba_flags */
enum hba_flags_table {
HBA_FLAGS_INTERNAL_USE = 0x01,
HBA_FLAGS_PSCSI_MODE = 0x02,
};
/* struct se_lun->lun_status */
enum transport_lun_status_table {
TRANSPORT_LUN_STATUS_FREE = 0,
TRANSPORT_LUN_STATUS_ACTIVE = 1,
};
/* struct se_portal_group->se_tpg_type */
enum transport_tpg_type_table {
TRANSPORT_TPG_TYPE_NORMAL = 0,
TRANSPORT_TPG_TYPE_DISCOVERY = 1,
};
/* Special transport agnostic struct se_cmd->t_states */
enum transport_state_table {
TRANSPORT_NO_STATE = 0,
TRANSPORT_NEW_CMD = 1,
TRANSPORT_WRITE_PENDING = 3,
TRANSPORT_PROCESSING = 5,
TRANSPORT_COMPLETE = 6,
TRANSPORT_ISTATE_PROCESSING = 11,
TRANSPORT_COMPLETE_QF_WP = 18,
TRANSPORT_COMPLETE_QF_OK = 19,
};
/* Used for struct se_cmd->se_cmd_flags */
enum se_cmd_flags_table {
SCF_SUPPORTED_SAM_OPCODE = 0x00000001,
SCF_TRANSPORT_TASK_SENSE = 0x00000002,
SCF_EMULATED_TASK_SENSE = 0x00000004,
SCF_SCSI_DATA_CDB = 0x00000008,
SCF_SCSI_TMR_CDB = 0x00000010,
SCF_SCSI_CDB_EXCEPTION = 0x00000020,
SCF_SCSI_RESERVATION_CONFLICT = 0x00000040,
SCF_FUA = 0x00000080,
SCF_SE_LUN_CMD = 0x00000100,
SCF_BIDI = 0x00000400,
SCF_SENT_CHECK_CONDITION = 0x00000800,
SCF_OVERFLOW_BIT = 0x00001000,
SCF_UNDERFLOW_BIT = 0x00002000,
SCF_SENT_DELAYED_TAS = 0x00004000,
SCF_ALUA_NON_OPTIMIZED = 0x00008000,
SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC = 0x00020000,
SCF_ACK_KREF = 0x00040000,
};
/* struct se_dev_entry->lun_flags and struct se_lun->lun_access */
enum transport_lunflags_table {
TRANSPORT_LUNFLAGS_NO_ACCESS = 0x00,
TRANSPORT_LUNFLAGS_INITIATOR_ACCESS = 0x01,
TRANSPORT_LUNFLAGS_READ_ONLY = 0x02,
TRANSPORT_LUNFLAGS_READ_WRITE = 0x04,
};
/* struct se_device->dev_status */
enum transport_device_status_table {
TRANSPORT_DEVICE_ACTIVATED = 0x01,
TRANSPORT_DEVICE_DEACTIVATED = 0x02,
TRANSPORT_DEVICE_QUEUE_FULL = 0x04,
TRANSPORT_DEVICE_SHUTDOWN = 0x08,
TRANSPORT_DEVICE_OFFLINE_ACTIVATED = 0x10,
TRANSPORT_DEVICE_OFFLINE_DEACTIVATED = 0x20,
};
/*
* Used by transport_send_check_condition_and_sense() and se_cmd->scsi_sense_reason
* to signal which ASC/ASCQ sense payload should be built.
*/
enum tcm_sense_reason_table {
TCM_NON_EXISTENT_LUN = 0x01,
TCM_UNSUPPORTED_SCSI_OPCODE = 0x02,
TCM_INCORRECT_AMOUNT_OF_DATA = 0x03,
TCM_UNEXPECTED_UNSOLICITED_DATA = 0x04,
TCM_SERVICE_CRC_ERROR = 0x05,
TCM_SNACK_REJECTED = 0x06,
TCM_SECTOR_COUNT_TOO_MANY = 0x07,
TCM_INVALID_CDB_FIELD = 0x08,
TCM_INVALID_PARAMETER_LIST = 0x09,
TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE = 0x0a,
TCM_UNKNOWN_MODE_PAGE = 0x0b,
TCM_WRITE_PROTECTED = 0x0c,
TCM_CHECK_CONDITION_ABORT_CMD = 0x0d,
TCM_CHECK_CONDITION_UNIT_ATTENTION = 0x0e,
TCM_CHECK_CONDITION_NOT_READY = 0x0f,
TCM_RESERVATION_CONFLICT = 0x10,
TCM_ADDRESS_OUT_OF_RANGE = 0x11,
};
enum target_sc_flags_table {
TARGET_SCF_BIDI_OP = 0x01,
TARGET_SCF_ACK_KREF = 0x02,
TARGET_SCF_UNKNOWN_SIZE = 0x04,
};
/* fabric independent task management function values */
enum tcm_tmreq_table {
TMR_ABORT_TASK = 1,
TMR_ABORT_TASK_SET = 2,
TMR_CLEAR_ACA = 3,
TMR_CLEAR_TASK_SET = 4,
TMR_LUN_RESET = 5,
TMR_TARGET_WARM_RESET = 6,
TMR_TARGET_COLD_RESET = 7,
TMR_FABRIC_TMR = 255,
};
/* fabric independent task management response values */
enum tcm_tmrsp_table {
TMR_FUNCTION_COMPLETE = 0,
TMR_TASK_DOES_NOT_EXIST = 1,
TMR_LUN_DOES_NOT_EXIST = 2,
TMR_TASK_STILL_ALLEGIANT = 3,
TMR_TASK_FAILOVER_NOT_SUPPORTED = 4,
TMR_TASK_MGMT_FUNCTION_NOT_SUPPORTED = 5,
TMR_FUNCTION_AUTHORIZATION_FAILED = 6,
TMR_FUNCTION_REJECTED = 255,
};
struct se_obj {
atomic_t obj_access_count;
};
/*
* Used by TCM Core internally to signal if ALUA emulation is enabled or
* disabled, or running in with TCM/pSCSI passthrough mode
*/
typedef enum {
SPC_ALUA_PASSTHROUGH,
SPC2_ALUA_DISABLED,
SPC3_ALUA_EMULATED
} t10_alua_index_t;
/*
* Used by TCM Core internally to signal if SAM Task Attribute emulation
* is enabled or disabled, or running in with TCM/pSCSI passthrough mode
*/
typedef enum {
SAM_TASK_ATTR_PASSTHROUGH,
SAM_TASK_ATTR_UNTAGGED,
SAM_TASK_ATTR_EMULATED
} t10_task_attr_index_t;
/*
* Used for target SCSI statistics
*/
typedef enum {
SCSI_INST_INDEX,
SCSI_DEVICE_INDEX,
SCSI_AUTH_INTR_INDEX,
SCSI_INDEX_TYPE_MAX
} scsi_index_t;
struct se_cmd;
struct t10_alua {
t10_alua_index_t alua_type;
/* ALUA Target Port Group ID */
u16 alua_tg_pt_gps_counter;
u32 alua_tg_pt_gps_count;
spinlock_t tg_pt_gps_lock;
struct se_subsystem_dev *t10_sub_dev;
/* Used for default ALUA Target Port Group */
struct t10_alua_tg_pt_gp *default_tg_pt_gp;
/* Used for default ALUA Target Port Group ConfigFS group */
struct config_group alua_tg_pt_gps_group;
int (*alua_state_check)(struct se_cmd *, unsigned char *, u8 *);
struct list_head tg_pt_gps_list;
};
struct t10_alua_lu_gp {
u16 lu_gp_id;
int lu_gp_valid_id;
u32 lu_gp_members;
atomic_t lu_gp_ref_cnt;
spinlock_t lu_gp_lock;
struct config_group lu_gp_group;
struct list_head lu_gp_node;
struct list_head lu_gp_mem_list;
};
struct t10_alua_lu_gp_member {
bool lu_gp_assoc;
atomic_t lu_gp_mem_ref_cnt;
spinlock_t lu_gp_mem_lock;
struct t10_alua_lu_gp *lu_gp;
struct se_device *lu_gp_mem_dev;
struct list_head lu_gp_mem_list;
};
struct t10_alua_tg_pt_gp {
u16 tg_pt_gp_id;
int tg_pt_gp_valid_id;
int tg_pt_gp_alua_access_status;
int tg_pt_gp_alua_access_type;
int tg_pt_gp_nonop_delay_msecs;
int tg_pt_gp_trans_delay_msecs;
int tg_pt_gp_implict_trans_secs;
int tg_pt_gp_pref;
int tg_pt_gp_write_metadata;
/* Used by struct t10_alua_tg_pt_gp->tg_pt_gp_md_buf_len */
#define ALUA_MD_BUF_LEN 1024
u32 tg_pt_gp_md_buf_len;
u32 tg_pt_gp_members;
atomic_t tg_pt_gp_alua_access_state;
atomic_t tg_pt_gp_ref_cnt;
spinlock_t tg_pt_gp_lock;
struct mutex tg_pt_gp_md_mutex;
struct se_subsystem_dev *tg_pt_gp_su_dev;
struct config_group tg_pt_gp_group;
struct list_head tg_pt_gp_list;
struct list_head tg_pt_gp_mem_list;
};
struct t10_alua_tg_pt_gp_member {
bool tg_pt_gp_assoc;
atomic_t tg_pt_gp_mem_ref_cnt;
spinlock_t tg_pt_gp_mem_lock;
struct t10_alua_tg_pt_gp *tg_pt_gp;
struct se_port *tg_pt;
struct list_head tg_pt_gp_mem_list;
};
struct t10_vpd {
unsigned char device_identifier[INQUIRY_VPD_DEVICE_IDENTIFIER_LEN];
int protocol_identifier_set;
u32 protocol_identifier;
u32 device_identifier_code_set;
u32 association;
u32 device_identifier_type;
struct list_head vpd_list;
};
struct t10_wwn {
char vendor[8];
char model[16];
char revision[4];
char unit_serial[INQUIRY_VPD_SERIAL_LEN];
spinlock_t t10_vpd_lock;
struct se_subsystem_dev *t10_sub_dev;
struct config_group t10_wwn_group;
struct list_head t10_vpd_list;
};
/*
* Used by TCM Core internally to signal if >= SPC-3 persistent reservations
* emulation is enabled or disabled, or running in with TCM/pSCSI passthrough
* mode
*/
typedef enum {
SPC_PASSTHROUGH,
SPC2_RESERVATIONS,
SPC3_PERSISTENT_RESERVATIONS
} t10_reservations_index_t;
struct t10_pr_registration {
/* Used for fabrics that contain WWN+ISID */
#define PR_REG_ISID_LEN 16
/* PR_REG_ISID_LEN + ',i,0x' */
#define PR_REG_ISID_ID_LEN (PR_REG_ISID_LEN + 5)
char pr_reg_isid[PR_REG_ISID_LEN];
/* Used during APTPL metadata reading */
#define PR_APTPL_MAX_IPORT_LEN 256
unsigned char pr_iport[PR_APTPL_MAX_IPORT_LEN];
/* Used during APTPL metadata reading */
#define PR_APTPL_MAX_TPORT_LEN 256
unsigned char pr_tport[PR_APTPL_MAX_TPORT_LEN];
/* For writing out live meta data */
unsigned char *pr_aptpl_buf;
u16 pr_aptpl_rpti;
u16 pr_reg_tpgt;
/* Reservation effects all target ports */
int pr_reg_all_tg_pt;
/* Activate Persistence across Target Power Loss */
int pr_reg_aptpl;
int pr_res_holder;
int pr_res_type;
int pr_res_scope;
/* Used for fabric initiator WWPNs using a ISID */
bool isid_present_at_reg;
u32 pr_res_mapped_lun;
u32 pr_aptpl_target_lun;
u32 pr_res_generation;
u64 pr_reg_bin_isid;
u64 pr_res_key;
atomic_t pr_res_holders;
struct se_node_acl *pr_reg_nacl;
struct se_dev_entry *pr_reg_deve;
struct se_lun *pr_reg_tg_pt_lun;
struct list_head pr_reg_list;
struct list_head pr_reg_abort_list;
struct list_head pr_reg_aptpl_list;
struct list_head pr_reg_atp_list;
struct list_head pr_reg_atp_mem_list;
};
/*
* This set of function pointer ops is set based upon SPC3_PERSISTENT_RESERVATIONS,
* SPC2_RESERVATIONS or SPC_PASSTHROUGH in drivers/target/target_core_pr.c:
* core_setup_reservations()
*/
struct t10_reservation_ops {
int (*t10_reservation_check)(struct se_cmd *, u32 *);
int (*t10_seq_non_holder)(struct se_cmd *, unsigned char *, u32);
int (*t10_pr_register)(struct se_cmd *);
int (*t10_pr_clear)(struct se_cmd *);
};
struct t10_reservation {
/* Reservation effects all target ports */
int pr_all_tg_pt;
/* Activate Persistence across Target Power Loss enabled
* for SCSI device */
int pr_aptpl_active;
/* Used by struct t10_reservation->pr_aptpl_buf_len */
#define PR_APTPL_BUF_LEN 8192
u32 pr_aptpl_buf_len;
u32 pr_generation;
t10_reservations_index_t res_type;
spinlock_t registration_lock;
spinlock_t aptpl_reg_lock;
/*
* This will always be set by one individual I_T Nexus.
* However with all_tg_pt=1, other I_T Nexus from the
* same initiator can access PR reg/res info on a different
* target port.
*
* There is also the 'All Registrants' case, where there is
* a single *pr_res_holder of the reservation, but all
* registrations are considered reservation holders.
*/
struct se_node_acl *pr_res_holder;
struct list_head registration_list;
struct list_head aptpl_reg_list;
struct t10_reservation_ops pr_ops;
};
struct se_tmr_req {
/* Task Management function to be performed */
u8 function;
/* Task Management response to send */
u8 response;
int call_transport;
/* Reference to ITT that Task Mgmt should be performed */
u32 ref_task_tag;
void *fabric_tmr_ptr;
struct se_cmd *task_cmd;
struct se_device *tmr_dev;
struct se_lun *tmr_lun;
struct list_head tmr_list;
};
struct se_cmd {
/* SAM response code being sent to initiator */
u8 scsi_status;
u8 scsi_asc;
u8 scsi_ascq;
u8 scsi_sense_reason;
u16 scsi_sense_length;
/* Delay for ALUA Active/NonOptimized state access in milliseconds */
int alua_nonop_delay;
/* See include/linux/dma-mapping.h */
enum dma_data_direction data_direction;
/* For SAM Task Attribute */
int sam_task_attr;
/* Transport protocol dependent state, see transport_state_table */
enum transport_state_table t_state;
/* Used to signal cmd->se_tfo->check_release_cmd() usage per cmd */
unsigned check_release:1;
unsigned cmd_wait_set:1;
unsigned unknown_data_length:1;
/* See se_cmd_flags_table */
u32 se_cmd_flags;
u32 se_ordered_id;
/* Total size in bytes associated with command */
u32 data_length;
u32 residual_count;
u32 orig_fe_lun;
/* Persistent Reservation key */
u64 pr_res_key;
/* Used for sense data */
void *sense_buffer;
struct list_head se_delayed_node;
struct list_head se_lun_node;
struct list_head se_qf_node;
struct se_device *se_dev;
struct se_dev_entry *se_deve;
struct se_lun *se_lun;
/* Only used for internal passthrough and legacy TCM fabric modules */
struct se_session *se_sess;
struct se_tmr_req *se_tmr_req;
struct list_head se_cmd_list;
struct completion cmd_wait_comp;
struct kref cmd_kref;
struct target_core_fabric_ops *se_tfo;
int (*execute_cmd)(struct se_cmd *);
void (*transport_complete_callback)(struct se_cmd *);
unsigned char *t_task_cdb;
unsigned char __t_task_cdb[TCM_MAX_COMMAND_SIZE];
unsigned long long t_task_lba;
atomic_t t_fe_count;
unsigned int transport_state;
#define CMD_T_ABORTED (1 << 0)
#define CMD_T_ACTIVE (1 << 1)
#define CMD_T_COMPLETE (1 << 2)
#define CMD_T_QUEUED (1 << 3)
#define CMD_T_SENT (1 << 4)
#define CMD_T_STOP (1 << 5)
#define CMD_T_FAILED (1 << 6)
#define CMD_T_LUN_STOP (1 << 7)
#define CMD_T_LUN_FE_STOP (1 << 8)
#define CMD_T_DEV_ACTIVE (1 << 9)
#define CMD_T_REQUEST_STOP (1 << 10)
#define CMD_T_BUSY (1 << 11)
spinlock_t t_state_lock;
struct completion t_transport_stop_comp;
struct completion transport_lun_fe_stop_comp;
struct completion transport_lun_stop_comp;
struct work_struct work;
struct scatterlist *t_data_sg;
unsigned int t_data_nents;
void *t_data_vmap;
struct scatterlist *t_bidi_data_sg;
unsigned int t_bidi_data_nents;
struct list_head state_list;
bool state_active;
/* old task stop completion, consider merging with some of the above */
struct completion task_stop_comp;
/* backend private data */
void *priv;
};
struct se_ua {
u8 ua_asc;
u8 ua_ascq;
struct se_node_acl *ua_nacl;
struct list_head ua_dev_list;
struct list_head ua_nacl_list;
};
struct se_node_acl {
char initiatorname[TRANSPORT_IQN_LEN];
/* Used to signal demo mode created ACL, disabled by default */
bool dynamic_node_acl;
bool acl_stop:1;
u32 queue_depth;
u32 acl_index;
u64 num_cmds;
u64 read_bytes;
u64 write_bytes;
spinlock_t stats_lock;
/* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
atomic_t acl_pr_ref_count;
struct se_dev_entry **device_list;
struct se_session *nacl_sess;
struct se_portal_group *se_tpg;
spinlock_t device_list_lock;
spinlock_t nacl_sess_lock;
struct config_group acl_group;
struct config_group acl_attrib_group;
struct config_group acl_auth_group;
struct config_group acl_param_group;
struct config_group acl_fabric_stat_group;
struct config_group *acl_default_groups[5];
struct list_head acl_list;
struct list_head acl_sess_list;
struct completion acl_free_comp;
struct kref acl_kref;
};
struct se_session {
unsigned sess_tearing_down:1;
u64 sess_bin_isid;
struct se_node_acl *se_node_acl;
struct se_portal_group *se_tpg;
void *fabric_sess_ptr;
struct list_head sess_list;
struct list_head sess_acl_list;
struct list_head sess_cmd_list;
spinlock_t sess_cmd_lock;
struct kref sess_kref;
};
struct se_device;
struct se_transform_info;
struct scatterlist;
struct se_ml_stat_grps {
struct config_group stat_group;
struct config_group scsi_auth_intr_group;
struct config_group scsi_att_intr_port_group;
};
struct se_lun_acl {
char initiatorname[TRANSPORT_IQN_LEN];
u32 mapped_lun;
struct se_node_acl *se_lun_nacl;
struct se_lun *se_lun;
struct list_head lacl_list;
struct config_group se_lun_group;
struct se_ml_stat_grps ml_stat_grps;
};
struct se_dev_entry {
bool def_pr_registered;
/* See transport_lunflags_table */
u32 lun_flags;
u32 deve_cmds;
u32 mapped_lun;
u32 average_bytes;
u32 last_byte_count;
u32 total_cmds;
u32 total_bytes;
u64 pr_res_key;
u64 creation_time;
u32 attach_count;
u64 read_bytes;
u64 write_bytes;
atomic_t ua_count;
/* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
atomic_t pr_ref_count;
struct se_lun_acl *se_lun_acl;
spinlock_t ua_lock;
struct se_lun *se_lun;
struct list_head alua_port_list;
struct list_head ua_list;
};
struct se_dev_limits {
/* Max supported HW queue depth */
u32 hw_queue_depth;
/* Max supported virtual queue depth */
u32 queue_depth;
/* From include/linux/blkdev.h for the other HW/SW limits. */
struct queue_limits limits;
};
struct se_dev_attrib {
int emulate_dpo;
int emulate_fua_write;
int emulate_fua_read;
int emulate_write_cache;
int emulate_ua_intlck_ctrl;
int emulate_tas;
int emulate_tpu;
int emulate_tpws;
int emulate_reservations;
int emulate_alua;
int enforce_pr_isids;
int is_nonrot;
int emulate_rest_reord;
u32 hw_block_size;
u32 block_size;
u32 hw_max_sectors;
u32 fabric_max_sectors;
u32 optimal_sectors;
u32 hw_queue_depth;
u32 queue_depth;
u32 max_unmap_lba_count;
u32 max_unmap_block_desc_count;
u32 unmap_granularity;
u32 unmap_granularity_alignment;
struct se_subsystem_dev *da_sub_dev;
struct config_group da_group;
};
struct se_dev_stat_grps {
struct config_group stat_group;
struct config_group scsi_dev_group;
struct config_group scsi_tgt_dev_group;
struct config_group scsi_lu_group;
};
struct se_subsystem_dev {
/* Used for struct se_subsystem_dev-->se_dev_alias, must be less than PAGE_SIZE */
#define SE_DEV_ALIAS_LEN 512
unsigned char se_dev_alias[SE_DEV_ALIAS_LEN];
/* Used for struct se_subsystem_dev->se_dev_udev_path[], must be less than PAGE_SIZE */
#define SE_UDEV_PATH_LEN 512
unsigned char se_dev_udev_path[SE_UDEV_PATH_LEN];
u32 su_dev_flags;
struct se_hba *se_dev_hba;
struct se_device *se_dev_ptr;
struct se_dev_attrib se_dev_attrib;
/* T10 Asymmetric Logical Unit Assignment for Target Ports */
struct t10_alua t10_alua;
/* T10 Inquiry and VPD WWN Information */
struct t10_wwn t10_wwn;
/* T10 SPC-2 + SPC-3 Reservations */
struct t10_reservation t10_pr;
spinlock_t se_dev_lock;
void *se_dev_su_ptr;
struct config_group se_dev_group;
/* For T10 Reservations */
struct config_group se_dev_pr_group;
/* For target_core_stat.c groups */
struct se_dev_stat_grps dev_stat_grps;
};
struct se_device {
/* RELATIVE TARGET PORT IDENTIFER Counter */
u16 dev_rpti_counter;
/* Used for SAM Task Attribute ordering */
u32 dev_cur_ordered_id;
u32 dev_flags;
u32 dev_port_count;
/* See transport_device_status_table */
u32 dev_status;
/* Physical device queue depth */
u32 queue_depth;
/* Used for SPC-2 reservations enforce of ISIDs */
u64 dev_res_bin_isid;
t10_task_attr_index_t dev_task_attr_type;
/* Pointer to transport specific device structure */
void *dev_ptr;
u32 dev_index;
u64 creation_time;
u32 num_resets;
u64 num_cmds;
u64 read_bytes;
u64 write_bytes;
spinlock_t stats_lock;
/* Active commands on this virtual SE device */
atomic_t simple_cmds;
atomic_t dev_ordered_id;
atomic_t dev_ordered_sync;
atomic_t dev_qf_count;
struct se_obj dev_obj;
struct se_obj dev_access_obj;
struct se_obj dev_export_obj;
spinlock_t delayed_cmd_lock;
spinlock_t execute_task_lock;
spinlock_t dev_reservation_lock;
spinlock_t dev_status_lock;
spinlock_t se_port_lock;
spinlock_t se_tmr_lock;
spinlock_t qf_cmd_lock;
/* Used for legacy SPC-2 reservationsa */
struct se_node_acl *dev_reserved_node_acl;
/* Used for ALUA Logical Unit Group membership */
struct t10_alua_lu_gp_member *dev_alua_lu_gp_mem;
/* Used for SPC-3 Persistent Reservations */
struct t10_pr_registration *dev_pr_res_holder;
struct list_head dev_sep_list;
struct list_head dev_tmr_list;
struct workqueue_struct *tmr_wq;
struct work_struct qf_work_queue;
struct list_head delayed_cmd_list;
struct list_head state_list;
struct list_head qf_cmd_list;
/* Pointer to associated SE HBA */
struct se_hba *se_hba;
struct se_subsystem_dev *se_sub_dev;
/* Pointer to template of function pointers for transport */
struct se_subsystem_api *transport;
/* Linked list for struct se_hba struct se_device list */
struct list_head dev_list;
};
struct se_hba {
u16 hba_tpgt;
u32 hba_id;
/* See hba_flags_table */
u32 hba_flags;
/* Virtual iSCSI devices attached. */
u32 dev_count;
u32 hba_index;
/* Pointer to transport specific host structure. */
void *hba_ptr;
/* Linked list for struct se_device */
struct list_head hba_dev_list;
struct list_head hba_node;
spinlock_t device_lock;
struct config_group hba_group;
struct mutex hba_access_mutex;
struct se_subsystem_api *transport;
};
struct se_port_stat_grps {
struct config_group stat_group;
struct config_group scsi_port_group;
struct config_group scsi_tgt_port_group;
struct config_group scsi_transport_group;
};
struct se_lun {
/* See transport_lun_status_table */
enum transport_lun_status_table lun_status;
u32 lun_access;
u32 lun_flags;
u32 unpacked_lun;
atomic_t lun_acl_count;
spinlock_t lun_acl_lock;
spinlock_t lun_cmd_lock;
spinlock_t lun_sep_lock;
struct completion lun_shutdown_comp;
struct list_head lun_cmd_list;
struct list_head lun_acl_list;
struct se_device *lun_se_dev;
struct se_port *lun_sep;
struct config_group lun_group;
struct se_port_stat_grps port_stat_grps;
};
struct scsi_port_stats {
u64 cmd_pdus;
u64 tx_data_octets;
u64 rx_data_octets;
};
struct se_port {
/* RELATIVE TARGET PORT IDENTIFER */
u16 sep_rtpi;
int sep_tg_pt_secondary_stat;
int sep_tg_pt_secondary_write_md;
u32 sep_index;
struct scsi_port_stats sep_stats;
/* Used for ALUA Target Port Groups membership */
atomic_t sep_tg_pt_secondary_offline;
/* Used for PR ALL_TG_PT=1 */
atomic_t sep_tg_pt_ref_cnt;
spinlock_t sep_alua_lock;
struct mutex sep_tg_pt_md_mutex;
struct t10_alua_tg_pt_gp_member *sep_alua_tg_pt_gp_mem;
struct se_lun *sep_lun;
struct se_portal_group *sep_tpg;
struct list_head sep_alua_list;
struct list_head sep_list;
};
struct se_tpg_np {
struct se_portal_group *tpg_np_parent;
struct config_group tpg_np_group;
};
struct se_portal_group {
/* Type of target portal group, see transport_tpg_type_table */
enum transport_tpg_type_table se_tpg_type;
/* Number of ACLed Initiator Nodes for this TPG */
u32 num_node_acls;
/* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
atomic_t tpg_pr_ref_count;
/* Spinlock for adding/removing ACLed Nodes */
spinlock_t acl_node_lock;
/* Spinlock for adding/removing sessions */
spinlock_t session_lock;
spinlock_t tpg_lun_lock;
/* Pointer to $FABRIC_MOD portal group */
void *se_tpg_fabric_ptr;
struct list_head se_tpg_node;
/* linked list for initiator ACL list */
struct list_head acl_node_list;
struct se_lun **tpg_lun_list;
struct se_lun tpg_virt_lun0;
/* List of TCM sessions associated wth this TPG */
struct list_head tpg_sess_list;
/* Pointer to $FABRIC_MOD dependent code */
struct target_core_fabric_ops *se_tpg_tfo;
struct se_wwn *se_tpg_wwn;
struct config_group tpg_group;
struct config_group *tpg_default_groups[6];
struct config_group tpg_lun_group;
struct config_group tpg_np_group;
struct config_group tpg_acl_group;
struct config_group tpg_attrib_group;
struct config_group tpg_param_group;
};
struct se_wwn {
struct target_fabric_configfs *wwn_tf;
struct config_group wwn_group;
struct config_group *wwn_default_groups[2];
struct config_group fabric_stat_group;
};
#endif /* TARGET_CORE_BASE_H */