564ee46fb7
This is here most likely since the FSL bsp. Back in the FSL bsp it was set to 50Mhz and working. However the driver divided the SoC freq. only by 2. According to the TRM the platform clock (which the manual refers in its formula) is the system clock divided by two. So in the end it has to divide by 4 and this is what the fsl-spi driver in tree is doing. Since then the flash is not wokring I guess. After chaning the freq from 50Mhz to 40Mhz like others do then I can access the flash. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
291 lines
6 KiB
Text
291 lines
6 KiB
Text
/*
|
|
* P2020 RDB Device Tree Source
|
|
*
|
|
* Copyright 2009-2012 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/include/ "fsl/p2020si-pre.dtsi"
|
|
|
|
/ {
|
|
model = "fsl,P2020RDB";
|
|
compatible = "fsl,P2020RDB";
|
|
|
|
aliases {
|
|
ethernet0 = &enet0;
|
|
ethernet1 = &enet1;
|
|
ethernet2 = &enet2;
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
pci0 = &pci0;
|
|
pci1 = &pci1;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
};
|
|
|
|
lbc: localbus@ffe05000 {
|
|
reg = <0 0xffe05000 0 0x1000>;
|
|
|
|
/* NOR and NAND Flashes */
|
|
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
|
|
0x1 0x0 0x0 0xff800000 0x00040000
|
|
0x2 0x0 0x0 0xffb00000 0x00020000>;
|
|
|
|
nor@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x0 0x0 0x1000000>;
|
|
bank-width = <2>;
|
|
device-width = <1>;
|
|
|
|
partition@0 {
|
|
/* This location must not be altered */
|
|
/* 256KB for Vitesse 7385 Switch firmware */
|
|
reg = <0x0 0x00040000>;
|
|
label = "NOR (RO) Vitesse-7385 Firmware";
|
|
read-only;
|
|
};
|
|
|
|
partition@40000 {
|
|
/* 256KB for DTB Image */
|
|
reg = <0x00040000 0x00040000>;
|
|
label = "NOR (RO) DTB Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@80000 {
|
|
/* 3.5 MB for Linux Kernel Image */
|
|
reg = <0x00080000 0x00380000>;
|
|
label = "NOR (RO) Linux Kernel Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@400000 {
|
|
/* 11MB for JFFS2 based Root file System */
|
|
reg = <0x00400000 0x00b00000>;
|
|
label = "NOR (RW) JFFS2 Root File System";
|
|
};
|
|
|
|
partition@f00000 {
|
|
/* This location must not be altered */
|
|
/* 512KB for u-boot Bootloader Image */
|
|
/* 512KB for u-boot Environment Variables */
|
|
reg = <0x00f00000 0x00100000>;
|
|
label = "NOR (RO) U-Boot Image";
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
nand@1,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,p2020-fcm-nand",
|
|
"fsl,elbc-fcm-nand";
|
|
reg = <0x1 0x0 0x40000>;
|
|
|
|
partition@0 {
|
|
/* This location must not be altered */
|
|
/* 1MB for u-boot Bootloader Image */
|
|
reg = <0x0 0x00100000>;
|
|
label = "NAND (RO) U-Boot Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
/* 1MB for DTB Image */
|
|
reg = <0x00100000 0x00100000>;
|
|
label = "NAND (RO) DTB Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@200000 {
|
|
/* 4MB for Linux Kernel Image */
|
|
reg = <0x00200000 0x00400000>;
|
|
label = "NAND (RO) Linux Kernel Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@600000 {
|
|
/* 4MB for Compressed Root file System Image */
|
|
reg = <0x00600000 0x00400000>;
|
|
label = "NAND (RO) Compressed RFS Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@a00000 {
|
|
/* 7MB for JFFS2 based Root file System */
|
|
reg = <0x00a00000 0x00700000>;
|
|
label = "NAND (RW) JFFS2 Root File System";
|
|
};
|
|
|
|
partition@1100000 {
|
|
/* 15MB for JFFS2 based Root file System */
|
|
reg = <0x01100000 0x00f00000>;
|
|
label = "NAND (RW) Writable User area";
|
|
};
|
|
};
|
|
|
|
L2switch@2,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "vitesse-7385";
|
|
reg = <0x2 0x0 0x20000>;
|
|
};
|
|
|
|
};
|
|
|
|
soc: soc@ffe00000 {
|
|
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
|
|
|
i2c@3000 {
|
|
rtc@68 {
|
|
compatible = "dallas,ds1339";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
spi@7000 {
|
|
flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "spansion,s25sl12801";
|
|
reg = <0>;
|
|
spi-max-frequency = <40000000>;
|
|
|
|
partition@0 {
|
|
/* 512KB for u-boot Bootloader Image */
|
|
reg = <0x0 0x00080000>;
|
|
label = "SPI (RO) U-Boot Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@80000 {
|
|
/* 512KB for DTB Image */
|
|
reg = <0x00080000 0x00080000>;
|
|
label = "SPI (RO) DTB Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
/* 4MB for Linux Kernel Image */
|
|
reg = <0x00100000 0x00400000>;
|
|
label = "SPI (RO) Linux Kernel Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@500000 {
|
|
/* 4MB for Compressed RFS Image */
|
|
reg = <0x00500000 0x00400000>;
|
|
label = "SPI (RO) Compressed RFS Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@900000 {
|
|
/* 7MB for JFFS2 based RFS */
|
|
reg = <0x00900000 0x00700000>;
|
|
label = "SPI (RW) JFFS2 RFS";
|
|
};
|
|
};
|
|
};
|
|
|
|
usb@22000 {
|
|
phy_type = "ulpi";
|
|
dr_mode = "host";
|
|
};
|
|
|
|
mdio@24520 {
|
|
phy0: ethernet-phy@0 {
|
|
interrupts = <3 1 0 0>;
|
|
reg = <0x0>;
|
|
};
|
|
phy1: ethernet-phy@1 {
|
|
interrupts = <3 1 0 0>;
|
|
reg = <0x1>;
|
|
};
|
|
tbi-phy@2 {
|
|
device_type = "tbi-phy";
|
|
reg = <0x2>;
|
|
};
|
|
};
|
|
|
|
mdio@25520 {
|
|
tbi0: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
|
|
mdio@26520 {
|
|
status = "disabled";
|
|
};
|
|
|
|
ptp_clock@24e00 {
|
|
fsl,tclk-period = <5>;
|
|
fsl,tmr-prsc = <200>;
|
|
fsl,tmr-add = <0xCCCCCCCD>;
|
|
fsl,tmr-fiper1 = <0x3B9AC9FB>;
|
|
fsl,tmr-fiper2 = <0x0001869B>;
|
|
fsl,max-adj = <249999999>;
|
|
};
|
|
|
|
enet0: ethernet@24000 {
|
|
fixed-link = <1 1 1000 0 0>;
|
|
phy-connection-type = "rgmii-id";
|
|
};
|
|
|
|
enet1: ethernet@25000 {
|
|
tbi-handle = <&tbi0>;
|
|
phy-handle = <&phy0>;
|
|
phy-connection-type = "sgmii";
|
|
};
|
|
|
|
enet2: ethernet@26000 {
|
|
phy-handle = <&phy1>;
|
|
phy-connection-type = "rgmii-id";
|
|
};
|
|
};
|
|
|
|
pci0: pcie@ffe08000 {
|
|
reg = <0 0xffe08000 0 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pci1: pcie@ffe09000 {
|
|
reg = <0 0xffe09000 0 0x1000>;
|
|
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
|
|
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
|
|
pcie@0 {
|
|
ranges = <0x2000000 0x0 0xa0000000
|
|
0x2000000 0x0 0xa0000000
|
|
0x0 0x20000000
|
|
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x100000>;
|
|
};
|
|
};
|
|
|
|
pci2: pcie@ffe0a000 {
|
|
reg = <0 0xffe0a000 0 0x1000>;
|
|
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
|
|
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
|
|
pcie@0 {
|
|
ranges = <0x2000000 0x0 0x80000000
|
|
0x2000000 0x0 0x80000000
|
|
0x0 0x20000000
|
|
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x100000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
/include/ "fsl/p2020si-post.dtsi"
|