kernel-fxtec-pro1x/drivers/ata
Tejun Heo 8b09f0da0f ata_piix: convert to prepare - activate initialization
ata_piix requires more configuration during initialization than most
other SFF compliant controllers and one-go initialzation with
ata_pci_one() is too rigid.

This patch converts ata_piix to use two step prepare - activate
initialization used by other more advanced controllers.  This
conversion brings the happy side effect of enabling PCI device before
accessing PCI configuration registers.  Other than that, there
shouldn't be any behavior change.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-23 05:24:16 -05:00
..
ahci.c libata annotations and fixes 2008-01-23 05:24:15 -05:00
ata_generic.c libata: kill ata_id_to_dma_mode() 2008-01-23 05:24:11 -05:00
ata_piix.c ata_piix: convert to prepare - activate initialization 2008-01-23 05:24:16 -05:00
Kconfig pata_ninja32: Cardbus ATA initial support 2008-01-23 05:24:10 -05:00
libata-acpi.c libata: reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask() 2008-01-23 05:24:12 -05:00
libata-core.c libata: factor out ata_pci_activate_sff_host() from ata_pci_one() 2008-01-23 05:24:16 -05:00
libata-eh.c libata: rename ATA_PROT_ATAPI_* to ATAPI_PROT_* 2008-01-23 05:24:14 -05:00
libata-pmp.c libata-pmp: 4726 hates SRST 2008-01-10 16:53:12 -05:00
libata-scsi.c [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof() 2008-01-23 05:24:16 -05:00
libata-sff.c libata: factor out ata_pci_activate_sff_host() from ata_pci_one() 2008-01-23 05:24:16 -05:00
libata.h libata: move ata_set_mode() to libata-eh.c 2008-01-23 05:24:10 -05:00
Makefile pata_ninja32: Cardbus ATA initial support 2008-01-23 05:24:10 -05:00
pata_acpi.c libata: implement ata_timing_cycle2mode() and use it in libata-acpi and pata_acpi 2008-01-23 05:24:12 -05:00
pata_ali.c libata: checkpatch fixes 2008-01-23 05:24:10 -05:00
pata_amd.c pata_amd: update mode selection for NV PATAs 2008-01-23 05:24:12 -05:00
pata_artop.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_at32.c Several fixes for the AVR32 PATA driver 2007-12-01 17:35:58 -05:00
pata_atiixp.c pata_atiixp: Audit notes on locking 2007-10-12 14:55:42 -04:00
pata_bf54x.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
pata_cmd64x.c pata_cmd64x.c typo fix 2007-10-20 01:02:48 +02:00
pata_cmd640.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_cs5520.c libata annotations and fixes 2008-01-23 05:24:15 -05:00
pata_cs5530.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_cs5535.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_cs5536.c pata_cs5536: MWDMA fix 2007-10-19 22:55:03 -04:00
pata_cypress.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_efar.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_hpt3x2n.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_hpt3x3.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pata_hpt37x.c pata_hpt37x: checkpatch fixes 2008-01-23 05:24:13 -05:00
pata_hpt366.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_icside.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
pata_isapnp.c pata_isapnp: Polled devices 2007-11-23 19:33:27 -05:00
pata_it821x.c libata/pata_it821x: Improve handling of poorly compatible emulations 2008-01-23 05:24:15 -05:00
pata_it8213.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_ixp4xx_cf.c libata: update ->data_xfer hook for ATAPI 2008-01-23 05:24:14 -05:00
pata_jmicron.c pata_jmicron: fix disabled port handling in jmicron_pre_reset() 2007-11-23 19:23:55 -05:00
pata_legacy.c pata_legacy: resychronize with upstream changes and resubmit 2008-01-23 05:24:16 -05:00
pata_marvell.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_mpc52xx.c mpc52xx-ata: fix compile warning (unused variable) 2007-10-14 08:57:30 -07:00
pata_mpiix.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_netcell.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_ninja32.c libata: checkpatch fixes 2008-01-23 05:24:10 -05:00
pata_ns87410.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_ns87415.c pata_ns87415: define SUPERIO_IDE_MAX_RETRIES 2007-10-29 06:21:33 -04:00
pata_oldpiix.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_opti.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_optidma.c [libata] fix 'if(' and similar areas that lack whitespace 2007-10-29 06:15:27 -04:00
pata_pcmcia.c pata_pcmcia: convert to new data_xfer prototype 2008-01-23 05:24:15 -05:00
pata_pdc202xx_old.c libata: rename ATA_PROT_ATAPI_* to ATAPI_PROT_* 2008-01-23 05:24:14 -05:00
pata_pdc2027x.c libata annotations and fixes 2008-01-23 05:24:15 -05:00
pata_platform.c libata: pata_platform: Support polling-mode configuration. 2007-11-08 13:08:41 -05:00
pata_qdi.c libata: update ->data_xfer hook for ATAPI 2008-01-23 05:24:14 -05:00
pata_radisys.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_rz1000.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_sc1200.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_scc.c libata: update ->data_xfer hook for ATAPI 2008-01-23 05:24:14 -05:00
pata_serverworks.c pata_serverworks: Fix problem with some drive combinations 2007-11-05 18:08:46 -05:00
pata_sil680.c pata_sil680: kill bogus reset code (take 2) 2007-11-23 19:23:55 -05:00
pata_sis.c pata_sis.c: Add Packard Bell EasyNote K5305 to laptops 2007-11-19 12:28:11 +09:00
pata_sl82c105.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_triflex.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_via.c libata: reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask() 2008-01-23 05:24:12 -05:00
pata_winbond.c [libata] pata_winbond: update for new ->data_xfer hook 2008-01-23 05:24:16 -05:00
pdc_adma.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
sata_fsl.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
sata_inic162x.c libata: rename ATA_PROT_ATAPI_* to ATAPI_PROT_* 2008-01-23 05:24:14 -05:00
sata_mv.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
sata_nv.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
sata_promise.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
sata_promise.h libata annotations and fixes 2008-01-23 05:24:15 -05:00
sata_qstor.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
sata_sil.c libata: implement protocol tests 2008-01-23 05:24:10 -05:00
sata_sil24.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
sata_sis.c [libata] Address some checkpatch-spotted issues 2007-10-29 06:15:27 -04:00
sata_svw.c [libata] Address some checkpatch-spotted issues 2007-10-29 06:15:27 -04:00
sata_sx4.c libata annotations and fixes 2008-01-23 05:24:15 -05:00
sata_uli.c [libata] Address some checkpatch-spotted issues 2007-10-29 06:15:27 -04:00
sata_via.c [libata] Address some checkpatch-spotted issues 2007-10-29 06:15:27 -04:00
sata_vsc.c [libata] Address some checkpatch-spotted issues 2007-10-29 06:15:27 -04:00
sis.h libata: PATA-mode fixes for sis_sata 2007-07-02 10:17:42 -04:00