b78d8e59a6
The patch makes necessary changes on gpio-mxc as below to turn it into an upstanding gpio driver. * Add a list to save all mx2 ports references, so that mx2_gpio_irq_handler can walk through all interrupt status registers * Use readl/writel to replace mach-specific accessors __raw_readl/__raw_writel * Change mxc_gpio_init into mxc_gpio_probe function * Move "struct mxc_gpio_port" into gpio-mxc.c, as it needs not to be public at all, and also make some other cleanup on plat-mxc/include/mach/gpio.h at the same time And the patch then migrates mach-imx and mach-mx5 to the updated driver by adding corresponding platform devices. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
145 lines
3.8 KiB
C
145 lines
3.8 KiB
C
/*
|
|
* Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
*/
|
|
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include <mach/common.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/iomux-mx53.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/time.h>
|
|
|
|
#include "crm_regs.h"
|
|
#include "devices-imx53.h"
|
|
|
|
#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6)
|
|
|
|
static iomux_v3_cfg_t mx53_smd_pads[] = {
|
|
MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
|
|
MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
|
|
|
|
MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
|
|
MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
|
|
|
|
MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
|
|
MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
|
|
MX53_PAD_PATA_DA_1__UART3_CTS,
|
|
MX53_PAD_PATA_DA_2__UART3_RTS,
|
|
/* I2C1 */
|
|
MX53_PAD_CSI0_DAT8__I2C1_SDA,
|
|
MX53_PAD_CSI0_DAT9__I2C1_SCL,
|
|
/* SD1 */
|
|
MX53_PAD_SD1_CMD__ESDHC1_CMD,
|
|
MX53_PAD_SD1_CLK__ESDHC1_CLK,
|
|
MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
|
|
MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
|
|
MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
|
|
MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
|
|
/* SD2 */
|
|
MX53_PAD_SD2_CMD__ESDHC2_CMD,
|
|
MX53_PAD_SD2_CLK__ESDHC2_CLK,
|
|
MX53_PAD_SD2_DATA0__ESDHC2_DAT0,
|
|
MX53_PAD_SD2_DATA1__ESDHC2_DAT1,
|
|
MX53_PAD_SD2_DATA2__ESDHC2_DAT2,
|
|
MX53_PAD_SD2_DATA3__ESDHC2_DAT3,
|
|
/* SD3 */
|
|
MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
|
|
MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
|
|
MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
|
|
MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
|
|
MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
|
|
MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
|
|
MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
|
|
MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
|
|
MX53_PAD_PATA_IORDY__ESDHC3_CLK,
|
|
MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
|
|
};
|
|
|
|
static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
|
|
.flags = IMXUART_HAVE_RTSCTS,
|
|
};
|
|
|
|
static inline void mx53_smd_init_uart(void)
|
|
{
|
|
imx53_add_imx_uart(0, NULL);
|
|
imx53_add_imx_uart(1, NULL);
|
|
imx53_add_imx_uart(2, &mx53_smd_uart_data);
|
|
}
|
|
|
|
static inline void mx53_smd_fec_reset(void)
|
|
{
|
|
int ret;
|
|
|
|
/* reset FEC PHY */
|
|
ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
|
|
if (ret) {
|
|
printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
|
|
return;
|
|
}
|
|
gpio_direction_output(SMD_FEC_PHY_RST, 0);
|
|
msleep(1);
|
|
gpio_set_value(SMD_FEC_PHY_RST, 1);
|
|
}
|
|
|
|
static struct fec_platform_data mx53_smd_fec_data = {
|
|
.phy = PHY_INTERFACE_MODE_RMII,
|
|
};
|
|
|
|
static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
|
|
.bitrate = 100000,
|
|
};
|
|
|
|
static void __init mx53_smd_board_init(void)
|
|
{
|
|
imx53_soc_init();
|
|
|
|
mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
|
|
ARRAY_SIZE(mx53_smd_pads));
|
|
mx53_smd_init_uart();
|
|
mx53_smd_fec_reset();
|
|
imx53_add_fec(&mx53_smd_fec_data);
|
|
imx53_add_imx2_wdt(0, NULL);
|
|
imx53_add_imx_i2c(0, &mx53_smd_i2c_data);
|
|
imx53_add_sdhci_esdhc_imx(0, NULL);
|
|
imx53_add_sdhci_esdhc_imx(1, NULL);
|
|
imx53_add_sdhci_esdhc_imx(2, NULL);
|
|
}
|
|
|
|
static void __init mx53_smd_timer_init(void)
|
|
{
|
|
mx53_clocks_init(32768, 24000000, 22579200, 0);
|
|
}
|
|
|
|
static struct sys_timer mx53_smd_timer = {
|
|
.init = mx53_smd_timer_init,
|
|
};
|
|
|
|
MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
|
|
.map_io = mx53_map_io,
|
|
.init_early = imx53_init_early,
|
|
.init_irq = mx53_init_irq,
|
|
.timer = &mx53_smd_timer,
|
|
.init_machine = mx53_smd_board_init,
|
|
MACHINE_END
|