1ceacea220
The ACCES 104-IDIO-16 family of PC/104 utility boards feature 16 optically isolated inputs and 16 optically isolated FET solid state outputs. This driver provides GPIO support for these 32 channels of digital I/O. Change-of-State detection interrupts are not supported. GPIO 0-15 correspond to digital outputs 0-15, while GPIO 16-31 correspond to digital inputs 0-15. The base port address for the device may be set via the idio_16_base module parameter. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
216 lines
5.3 KiB
C
216 lines
5.3 KiB
C
/*
|
|
* GPIO driver for the ACCES 104-IDIO-16 family
|
|
* Copyright (C) 2015 William Breathitt Gray
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License, version 2, as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*/
|
|
#include <linux/device.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
static unsigned idio_16_base;
|
|
module_param(idio_16_base, uint, 0);
|
|
MODULE_PARM_DESC(idio_16_base, "ACCES 104-IDIO-16 base address");
|
|
|
|
/**
|
|
* struct idio_16_gpio - GPIO device private data structure
|
|
* @chip: instance of the gpio_chip
|
|
* @lock: synchronization lock to prevent gpio_set race conditions
|
|
* @base: base port address of the GPIO device
|
|
* @extent: extent of port address region of the GPIO device
|
|
* @out_state: output bits state
|
|
*/
|
|
struct idio_16_gpio {
|
|
struct gpio_chip chip;
|
|
spinlock_t lock;
|
|
unsigned base;
|
|
unsigned extent;
|
|
unsigned out_state;
|
|
};
|
|
|
|
static int idio_16_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
if (offset > 15)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int idio_16_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int idio_16_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned offset, int value)
|
|
{
|
|
chip->set(chip, offset, value);
|
|
return 0;
|
|
}
|
|
|
|
static struct idio_16_gpio *to_idio16gpio(struct gpio_chip *gc)
|
|
{
|
|
return container_of(gc, struct idio_16_gpio, chip);
|
|
}
|
|
|
|
static int idio_16_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct idio_16_gpio *const idio16gpio = to_idio16gpio(chip);
|
|
const unsigned BIT_MASK = 1U << (offset-16);
|
|
|
|
if (offset < 16)
|
|
return -EINVAL;
|
|
|
|
if (offset < 24)
|
|
return !!(inb(idio16gpio->base + 1) & BIT_MASK);
|
|
|
|
return !!(inb(idio16gpio->base + 5) & (BIT_MASK>>8));
|
|
}
|
|
|
|
static void idio_16_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct idio_16_gpio *const idio16gpio = to_idio16gpio(chip);
|
|
const unsigned BIT_MASK = 1U << offset;
|
|
unsigned long flags;
|
|
|
|
if (offset > 15)
|
|
return;
|
|
|
|
spin_lock_irqsave(&idio16gpio->lock, flags);
|
|
|
|
if (value)
|
|
idio16gpio->out_state |= BIT_MASK;
|
|
else
|
|
idio16gpio->out_state &= ~BIT_MASK;
|
|
|
|
if (offset > 7)
|
|
outb(idio16gpio->out_state >> 8, idio16gpio->base + 4);
|
|
else
|
|
outb(idio16gpio->out_state, idio16gpio->base);
|
|
|
|
spin_unlock_irqrestore(&idio16gpio->lock, flags);
|
|
}
|
|
|
|
static int __init idio_16_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct idio_16_gpio *idio16gpio;
|
|
int err;
|
|
|
|
const unsigned BASE = idio_16_base;
|
|
const unsigned EXTENT = 8;
|
|
const char *const NAME = dev_name(dev);
|
|
|
|
idio16gpio = devm_kzalloc(dev, sizeof(*idio16gpio), GFP_KERNEL);
|
|
if (!idio16gpio)
|
|
return -ENOMEM;
|
|
|
|
if (!request_region(BASE, EXTENT, NAME)) {
|
|
dev_err(dev, "Unable to lock %s port addresses (0x%X-0x%X)\n",
|
|
NAME, BASE, BASE + EXTENT);
|
|
err = -EBUSY;
|
|
goto err_lock_io_port;
|
|
}
|
|
|
|
idio16gpio->chip.label = NAME;
|
|
idio16gpio->chip.dev = dev;
|
|
idio16gpio->chip.owner = THIS_MODULE;
|
|
idio16gpio->chip.base = -1;
|
|
idio16gpio->chip.ngpio = 32;
|
|
idio16gpio->chip.get_direction = idio_16_gpio_get_direction;
|
|
idio16gpio->chip.direction_input = idio_16_gpio_direction_input;
|
|
idio16gpio->chip.direction_output = idio_16_gpio_direction_output;
|
|
idio16gpio->chip.get = idio_16_gpio_get;
|
|
idio16gpio->chip.set = idio_16_gpio_set;
|
|
idio16gpio->base = BASE;
|
|
idio16gpio->extent = EXTENT;
|
|
idio16gpio->out_state = 0xFFFF;
|
|
|
|
spin_lock_init(&idio16gpio->lock);
|
|
|
|
dev_set_drvdata(dev, idio16gpio);
|
|
|
|
err = gpiochip_add(&idio16gpio->chip);
|
|
if (err) {
|
|
dev_err(dev, "GPIO registering failed (%d)\n", err);
|
|
goto err_gpio_register;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_gpio_register:
|
|
release_region(BASE, EXTENT);
|
|
err_lock_io_port:
|
|
return err;
|
|
}
|
|
|
|
static int idio_16_remove(struct platform_device *pdev)
|
|
{
|
|
struct idio_16_gpio *const idio16gpio = platform_get_drvdata(pdev);
|
|
|
|
gpiochip_remove(&idio16gpio->chip);
|
|
release_region(idio16gpio->base, idio16gpio->extent);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_device *idio_16_device;
|
|
|
|
static struct platform_driver idio_16_driver = {
|
|
.driver = {
|
|
.name = "104-idio-16"
|
|
},
|
|
.remove = idio_16_remove
|
|
};
|
|
|
|
static void __exit idio_16_exit(void)
|
|
{
|
|
platform_device_unregister(idio_16_device);
|
|
platform_driver_unregister(&idio_16_driver);
|
|
}
|
|
|
|
static int __init idio_16_init(void)
|
|
{
|
|
int err;
|
|
|
|
idio_16_device = platform_device_alloc(idio_16_driver.driver.name, -1);
|
|
if (!idio_16_device)
|
|
return -ENOMEM;
|
|
|
|
err = platform_device_add(idio_16_device);
|
|
if (err)
|
|
goto err_platform_device;
|
|
|
|
err = platform_driver_probe(&idio_16_driver, idio_16_probe);
|
|
if (err)
|
|
goto err_platform_driver;
|
|
|
|
return 0;
|
|
|
|
err_platform_driver:
|
|
platform_device_del(idio_16_device);
|
|
err_platform_device:
|
|
platform_device_put(idio_16_device);
|
|
return err;
|
|
}
|
|
|
|
module_init(idio_16_init);
|
|
module_exit(idio_16_exit);
|
|
|
|
MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
|
|
MODULE_DESCRIPTION("ACCES 104-IDIO-16 GPIO driver");
|
|
MODULE_LICENSE("GPL");
|