kernel-fxtec-pro1x/sound/soc/ux500/ux500_msp_i2s.h
Lee Jones 0475680b5c ARM: ux500: Don't use enums for MSP IDs - for easy DT conversion
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07 15:36:09 +00:00

502 lines
12 KiB
C

/*
* Copyright (C) ST-Ericsson SA 2012
*
* Author: Ola Lilja <ola.o.lilja@stericsson.com>,
* for ST-Ericsson.
*
* License terms:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#ifndef UX500_MSP_I2S_H
#define UX500_MSP_I2S_H
#include <linux/platform_device.h>
#include <linux/platform_data/asoc-ux500-msp.h>
#define MSP_INPUT_FREQ_APB 48000000
/*** Stereo mode. Used for APB data accesses as 16 bits accesses (mono),
* 32 bits accesses (stereo).
***/
enum msp_stereo_mode {
MSP_MONO,
MSP_STEREO
};
/* Direction (Transmit/Receive mode) */
enum msp_direction {
MSP_TX = 1,
MSP_RX = 2
};
/* Transmit and receive configuration register */
#define MSP_BIG_ENDIAN 0x00000000
#define MSP_LITTLE_ENDIAN 0x00001000
#define MSP_UNEXPECTED_FS_ABORT 0x00000000
#define MSP_UNEXPECTED_FS_IGNORE 0x00008000
#define MSP_NON_MODE_BIT_MASK 0x00009000
/* Global configuration register */
#define RX_ENABLE 0x00000001
#define RX_FIFO_ENABLE 0x00000002
#define RX_SYNC_SRG 0x00000010
#define RX_CLK_POL_RISING 0x00000020
#define RX_CLK_SEL_SRG 0x00000040
#define TX_ENABLE 0x00000100
#define TX_FIFO_ENABLE 0x00000200
#define TX_SYNC_SRG_PROG 0x00001800
#define TX_SYNC_SRG_AUTO 0x00001000
#define TX_CLK_POL_RISING 0x00002000
#define TX_CLK_SEL_SRG 0x00004000
#define TX_EXTRA_DELAY_ENABLE 0x00008000
#define SRG_ENABLE 0x00010000
#define FRAME_GEN_ENABLE 0x00100000
#define SRG_CLK_SEL_APB 0x00000000
#define RX_FIFO_SYNC_HI 0x00000000
#define TX_FIFO_SYNC_HI 0x00000000
#define SPI_CLK_MODE_NORMAL 0x00000000
#define MSP_FRAME_SIZE_AUTO -1
#define MSP_DR 0x00
#define MSP_GCR 0x04
#define MSP_TCF 0x08
#define MSP_RCF 0x0c
#define MSP_SRG 0x10
#define MSP_FLR 0x14
#define MSP_DMACR 0x18
#define MSP_IMSC 0x20
#define MSP_RIS 0x24
#define MSP_MIS 0x28
#define MSP_ICR 0x2c
#define MSP_MCR 0x30
#define MSP_RCV 0x34
#define MSP_RCM 0x38
#define MSP_TCE0 0x40
#define MSP_TCE1 0x44
#define MSP_TCE2 0x48
#define MSP_TCE3 0x4c
#define MSP_RCE0 0x60
#define MSP_RCE1 0x64
#define MSP_RCE2 0x68
#define MSP_RCE3 0x6c
#define MSP_IODLY 0x70
#define MSP_ITCR 0x80
#define MSP_ITIP 0x84
#define MSP_ITOP 0x88
#define MSP_TSTDR 0x8c
#define MSP_PID0 0xfe0
#define MSP_PID1 0xfe4
#define MSP_PID2 0xfe8
#define MSP_PID3 0xfec
#define MSP_CID0 0xff0
#define MSP_CID1 0xff4
#define MSP_CID2 0xff8
#define MSP_CID3 0xffc
/* Protocol dependant parameters list */
#define RX_ENABLE_MASK BIT(0)
#define RX_FIFO_ENABLE_MASK BIT(1)
#define RX_FSYNC_MASK BIT(2)
#define DIRECT_COMPANDING_MASK BIT(3)
#define RX_SYNC_SEL_MASK BIT(4)
#define RX_CLK_POL_MASK BIT(5)
#define RX_CLK_SEL_MASK BIT(6)
#define LOOPBACK_MASK BIT(7)
#define TX_ENABLE_MASK BIT(8)
#define TX_FIFO_ENABLE_MASK BIT(9)
#define TX_FSYNC_MASK BIT(10)
#define TX_MSP_TDR_TSR BIT(11)
#define TX_SYNC_SEL_MASK (BIT(12) | BIT(11))
#define TX_CLK_POL_MASK BIT(13)
#define TX_CLK_SEL_MASK BIT(14)
#define TX_EXTRA_DELAY_MASK BIT(15)
#define SRG_ENABLE_MASK BIT(16)
#define SRG_CLK_POL_MASK BIT(17)
#define SRG_CLK_SEL_MASK (BIT(19) | BIT(18))
#define FRAME_GEN_EN_MASK BIT(20)
#define SPI_CLK_MODE_MASK (BIT(22) | BIT(21))
#define SPI_BURST_MODE_MASK BIT(23)
#define RXEN_SHIFT 0
#define RFFEN_SHIFT 1
#define RFSPOL_SHIFT 2
#define DCM_SHIFT 3
#define RFSSEL_SHIFT 4
#define RCKPOL_SHIFT 5
#define RCKSEL_SHIFT 6
#define LBM_SHIFT 7
#define TXEN_SHIFT 8
#define TFFEN_SHIFT 9
#define TFSPOL_SHIFT 10
#define TFSSEL_SHIFT 11
#define TCKPOL_SHIFT 13
#define TCKSEL_SHIFT 14
#define TXDDL_SHIFT 15
#define SGEN_SHIFT 16
#define SCKPOL_SHIFT 17
#define SCKSEL_SHIFT 18
#define FGEN_SHIFT 20
#define SPICKM_SHIFT 21
#define TBSWAP_SHIFT 28
#define RCKPOL_MASK BIT(0)
#define TCKPOL_MASK BIT(0)
#define SPICKM_MASK (BIT(1) | BIT(0))
#define MSP_RX_CLKPOL_BIT(n) ((n & RCKPOL_MASK) << RCKPOL_SHIFT)
#define MSP_TX_CLKPOL_BIT(n) ((n & TCKPOL_MASK) << TCKPOL_SHIFT)
#define P1ELEN_SHIFT 0
#define P1FLEN_SHIFT 3
#define DTYP_SHIFT 10
#define ENDN_SHIFT 12
#define DDLY_SHIFT 13
#define FSIG_SHIFT 15
#define P2ELEN_SHIFT 16
#define P2FLEN_SHIFT 19
#define P2SM_SHIFT 26
#define P2EN_SHIFT 27
#define FSYNC_SHIFT 15
#define P1ELEN_MASK 0x00000007
#define P2ELEN_MASK 0x00070000
#define P1FLEN_MASK 0x00000378
#define P2FLEN_MASK 0x03780000
#define DDLY_MASK 0x00003000
#define DTYP_MASK 0x00000600
#define P2SM_MASK 0x04000000
#define P2EN_MASK 0x08000000
#define ENDN_MASK 0x00001000
#define TFSPOL_MASK 0x00000400
#define TBSWAP_MASK 0x30000000
#define COMPANDING_MODE_MASK 0x00000c00
#define FSYNC_MASK 0x00008000
#define MSP_P1_ELEM_LEN_BITS(n) (n & P1ELEN_MASK)
#define MSP_P2_ELEM_LEN_BITS(n) (((n) << P2ELEN_SHIFT) & P2ELEN_MASK)
#define MSP_P1_FRAME_LEN_BITS(n) (((n) << P1FLEN_SHIFT) & P1FLEN_MASK)
#define MSP_P2_FRAME_LEN_BITS(n) (((n) << P2FLEN_SHIFT) & P2FLEN_MASK)
#define MSP_DATA_DELAY_BITS(n) (((n) << DDLY_SHIFT) & DDLY_MASK)
#define MSP_DATA_TYPE_BITS(n) (((n) << DTYP_SHIFT) & DTYP_MASK)
#define MSP_P2_START_MODE_BIT(n) ((n << P2SM_SHIFT) & P2SM_MASK)
#define MSP_P2_ENABLE_BIT(n) ((n << P2EN_SHIFT) & P2EN_MASK)
#define MSP_SET_ENDIANNES_BIT(n) ((n << ENDN_SHIFT) & ENDN_MASK)
#define MSP_FSYNC_POL(n) ((n << TFSPOL_SHIFT) & TFSPOL_MASK)
#define MSP_DATA_WORD_SWAP(n) ((n << TBSWAP_SHIFT) & TBSWAP_MASK)
#define MSP_SET_COMPANDING_MODE(n) ((n << DTYP_SHIFT) & \
COMPANDING_MODE_MASK)
#define MSP_SET_FSYNC_IGNORE(n) ((n << FSYNC_SHIFT) & FSYNC_MASK)
/* Flag register */
#define RX_BUSY BIT(0)
#define RX_FIFO_EMPTY BIT(1)
#define RX_FIFO_FULL BIT(2)
#define TX_BUSY BIT(3)
#define TX_FIFO_EMPTY BIT(4)
#define TX_FIFO_FULL BIT(5)
#define RBUSY_SHIFT 0
#define RFE_SHIFT 1
#define RFU_SHIFT 2
#define TBUSY_SHIFT 3
#define TFE_SHIFT 4
#define TFU_SHIFT 5
/* Multichannel control register */
#define RMCEN_SHIFT 0
#define RMCSF_SHIFT 1
#define RCMPM_SHIFT 3
#define TMCEN_SHIFT 5
#define TNCSF_SHIFT 6
/* Sample rate generator register */
#define SCKDIV_SHIFT 0
#define FRWID_SHIFT 10
#define FRPER_SHIFT 16
#define SCK_DIV_MASK 0x0000003FF
#define FRAME_WIDTH_BITS(n) (((n) << FRWID_SHIFT) & 0x0000FC00)
#define FRAME_PERIOD_BITS(n) (((n) << FRPER_SHIFT) & 0x1FFF0000)
/* DMA controller register */
#define RX_DMA_ENABLE BIT(0)
#define TX_DMA_ENABLE BIT(1)
#define RDMAE_SHIFT 0
#define TDMAE_SHIFT 1
/* Interrupt Register */
#define RX_SERVICE_INT BIT(0)
#define RX_OVERRUN_ERROR_INT BIT(1)
#define RX_FSYNC_ERR_INT BIT(2)
#define RX_FSYNC_INT BIT(3)
#define TX_SERVICE_INT BIT(4)
#define TX_UNDERRUN_ERR_INT BIT(5)
#define TX_FSYNC_ERR_INT BIT(6)
#define TX_FSYNC_INT BIT(7)
#define ALL_INT 0x000000ff
/* MSP test control register */
#define MSP_ITCR_ITEN BIT(0)
#define MSP_ITCR_TESTFIFO BIT(1)
#define RMCEN_BIT 0
#define RMCSF_BIT 1
#define RCMPM_BIT 3
#define TMCEN_BIT 5
#define TNCSF_BIT 6
/* Single or dual phase mode */
enum msp_phase_mode {
MSP_SINGLE_PHASE,
MSP_DUAL_PHASE
};
/* Frame length */
enum msp_frame_length {
MSP_FRAME_LEN_1 = 0,
MSP_FRAME_LEN_2 = 1,
MSP_FRAME_LEN_4 = 3,
MSP_FRAME_LEN_8 = 7,
MSP_FRAME_LEN_12 = 11,
MSP_FRAME_LEN_16 = 15,
MSP_FRAME_LEN_20 = 19,
MSP_FRAME_LEN_32 = 31,
MSP_FRAME_LEN_48 = 47,
MSP_FRAME_LEN_64 = 63
};
/* Element length */
enum msp_elem_length {
MSP_ELEM_LEN_8 = 0,
MSP_ELEM_LEN_10 = 1,
MSP_ELEM_LEN_12 = 2,
MSP_ELEM_LEN_14 = 3,
MSP_ELEM_LEN_16 = 4,
MSP_ELEM_LEN_20 = 5,
MSP_ELEM_LEN_24 = 6,
MSP_ELEM_LEN_32 = 7
};
enum msp_data_xfer_width {
MSP_DATA_TRANSFER_WIDTH_BYTE,
MSP_DATA_TRANSFER_WIDTH_HALFWORD,
MSP_DATA_TRANSFER_WIDTH_WORD
};
enum msp_frame_sync {
MSP_FSYNC_UNIGNORE = 0,
MSP_FSYNC_IGNORE = 1,
};
enum msp_phase2_start_mode {
MSP_PHASE2_START_MODE_IMEDIATE,
MSP_PHASE2_START_MODE_FSYNC
};
enum msp_btf {
MSP_BTF_MS_BIT_FIRST = 0,
MSP_BTF_LS_BIT_FIRST = 1
};
enum msp_fsync_pol {
MSP_FSYNC_POL_ACT_HI = 0,
MSP_FSYNC_POL_ACT_LO = 1
};
/* Data delay (in bit clock cycles) */
enum msp_delay {
MSP_DELAY_0 = 0,
MSP_DELAY_1 = 1,
MSP_DELAY_2 = 2,
MSP_DELAY_3 = 3
};
/* Configurations of clocks (transmit, receive or sample rate generator) */
enum msp_edge {
MSP_FALLING_EDGE = 0,
MSP_RISING_EDGE = 1,
};
enum msp_hws {
MSP_SWAP_NONE = 0,
MSP_SWAP_BYTE_PER_WORD = 1,
MSP_SWAP_BYTE_PER_HALF_WORD = 2,
MSP_SWAP_HALF_WORD_PER_WORD = 3
};
enum msp_compress_mode {
MSP_COMPRESS_MODE_LINEAR = 0,
MSP_COMPRESS_MODE_MU_LAW = 2,
MSP_COMPRESS_MODE_A_LAW = 3
};
enum msp_expand_mode {
MSP_EXPAND_MODE_LINEAR = 0,
MSP_EXPAND_MODE_LINEAR_SIGNED = 1,
MSP_EXPAND_MODE_MU_LAW = 2,
MSP_EXPAND_MODE_A_LAW = 3
};
#define MSP_FRAME_PERIOD_IN_MONO_MODE 256
#define MSP_FRAME_PERIOD_IN_STEREO_MODE 32
#define MSP_FRAME_WIDTH_IN_STEREO_MODE 16
enum msp_protocol {
MSP_I2S_PROTOCOL,
MSP_PCM_PROTOCOL,
MSP_PCM_COMPAND_PROTOCOL,
MSP_INVALID_PROTOCOL
};
/*
* No of registers to backup during
* suspend resume
*/
#define MAX_MSP_BACKUP_REGS 36
enum i2s_direction_t {
MSP_DIR_TX = 0x01,
MSP_DIR_RX = 0x02,
};
enum msp_data_size {
MSP_DATA_BITS_DEFAULT = -1,
MSP_DATA_BITS_8 = 0x00,
MSP_DATA_BITS_10,
MSP_DATA_BITS_12,
MSP_DATA_BITS_14,
MSP_DATA_BITS_16,
MSP_DATA_BITS_20,
MSP_DATA_BITS_24,
MSP_DATA_BITS_32,
};
enum msp_state {
MSP_STATE_IDLE = 0,
MSP_STATE_CONFIGURED = 1,
MSP_STATE_RUNNING = 2,
};
enum msp_rx_comparison_enable_mode {
MSP_COMPARISON_DISABLED = 0,
MSP_COMPARISON_NONEQUAL_ENABLED = 2,
MSP_COMPARISON_EQUAL_ENABLED = 3
};
struct msp_multichannel_config {
bool rx_multichannel_enable;
bool tx_multichannel_enable;
enum msp_rx_comparison_enable_mode rx_comparison_enable_mode;
u8 padding;
u32 comparison_value;
u32 comparison_mask;
u32 rx_channel_0_enable;
u32 rx_channel_1_enable;
u32 rx_channel_2_enable;
u32 rx_channel_3_enable;
u32 tx_channel_0_enable;
u32 tx_channel_1_enable;
u32 tx_channel_2_enable;
u32 tx_channel_3_enable;
};
struct msp_protdesc {
u32 rx_phase_mode;
u32 tx_phase_mode;
u32 rx_phase2_start_mode;
u32 tx_phase2_start_mode;
u32 rx_byte_order;
u32 tx_byte_order;
u32 rx_frame_len_1;
u32 rx_frame_len_2;
u32 tx_frame_len_1;
u32 tx_frame_len_2;
u32 rx_elem_len_1;
u32 rx_elem_len_2;
u32 tx_elem_len_1;
u32 tx_elem_len_2;
u32 rx_data_delay;
u32 tx_data_delay;
u32 rx_clk_pol;
u32 tx_clk_pol;
u32 rx_fsync_pol;
u32 tx_fsync_pol;
u32 rx_half_word_swap;
u32 tx_half_word_swap;
u32 compression_mode;
u32 expansion_mode;
u32 frame_sync_ignore;
u32 frame_period;
u32 frame_width;
u32 clocks_per_frame;
};
struct ux500_msp_config {
unsigned int f_inputclk;
unsigned int rx_clk_sel;
unsigned int tx_clk_sel;
unsigned int srg_clk_sel;
unsigned int rx_fsync_pol;
unsigned int tx_fsync_pol;
unsigned int rx_fsync_sel;
unsigned int tx_fsync_sel;
unsigned int rx_fifo_config;
unsigned int tx_fifo_config;
unsigned int loopback_enable;
unsigned int tx_data_enable;
unsigned int default_protdesc;
struct msp_protdesc protdesc;
int multichannel_configured;
struct msp_multichannel_config multichannel_config;
unsigned int direction;
unsigned int protocol;
unsigned int frame_freq;
enum msp_data_size data_size;
unsigned int def_elem_len;
unsigned int iodelay;
};
struct ux500_msp_dma_params {
unsigned int data_size;
dma_addr_t tx_rx_addr;
struct stedma40_chan_cfg *dma_cfg;
};
struct ux500_msp {
int id;
void __iomem *registers;
struct device *dev;
struct ux500_msp_dma_params playback_dma_data;
struct ux500_msp_dma_params capture_dma_data;
enum msp_state msp_state;
int def_elem_len;
unsigned int dir_busy;
int loopback_enable;
unsigned int f_bitclk;
};
struct msp_i2s_platform_data;
int ux500_msp_i2s_init_msp(struct platform_device *pdev,
struct ux500_msp **msp_p,
struct msp_i2s_platform_data *platform_data);
void ux500_msp_i2s_cleanup_msp(struct platform_device *pdev,
struct ux500_msp *msp);
int ux500_msp_i2s_open(struct ux500_msp *msp, struct ux500_msp_config *config);
int ux500_msp_i2s_close(struct ux500_msp *msp,
unsigned int dir);
int ux500_msp_i2s_trigger(struct ux500_msp *msp, int cmd,
int direction);
#endif