ed54fcfd78
Add definitions for RDPROOF, WRPROOF and PDCFBYTE bits of the Mode Register in the updated MMC controller found on the AT91SAM9260 and AT91SAM9263 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
109 lines
4.9 KiB
C
109 lines
4.9 KiB
C
/*
|
|
* include/asm-arm/arch-at91/at91_mci.h
|
|
*
|
|
* Copyright (C) 2005 Ivan Kokshaysky
|
|
* Copyright (C) SAN People
|
|
*
|
|
* MultiMedia Card Interface (MCI) registers.
|
|
* Based on AT91RM9200 datasheet revision F.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#ifndef AT91_MCI_H
|
|
#define AT91_MCI_H
|
|
|
|
#define AT91_MCI_CR 0x00 /* Control Register */
|
|
#define AT91_MCI_MCIEN (1 << 0) /* Multi-Media Interface Enable */
|
|
#define AT91_MCI_MCIDIS (1 << 1) /* Multi-Media Interface Disable */
|
|
#define AT91_MCI_PWSEN (1 << 2) /* Power Save Mode Enable */
|
|
#define AT91_MCI_PWSDIS (1 << 3) /* Power Save Mode Disable */
|
|
#define AT91_MCI_SWRST (1 << 7) /* Software Reset */
|
|
|
|
#define AT91_MCI_MR 0x04 /* Mode Register */
|
|
#define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */
|
|
#define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */
|
|
#define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */
|
|
#define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */
|
|
#define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */
|
|
#define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */
|
|
#define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */
|
|
#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */
|
|
|
|
#define AT91_MCI_DTOR 0x08 /* Data Timeout Register */
|
|
#define AT91_MCI_DTOCYC (0xf << 0) /* Data Timeout Cycle Number */
|
|
#define AT91_MCI_DTOMUL (7 << 4) /* Data Timeout Multiplier */
|
|
#define AT91_MCI_DTOMUL_1 (0 << 4)
|
|
#define AT91_MCI_DTOMUL_16 (1 << 4)
|
|
#define AT91_MCI_DTOMUL_128 (2 << 4)
|
|
#define AT91_MCI_DTOMUL_256 (3 << 4)
|
|
#define AT91_MCI_DTOMUL_1K (4 << 4)
|
|
#define AT91_MCI_DTOMUL_4K (5 << 4)
|
|
#define AT91_MCI_DTOMUL_64K (6 << 4)
|
|
#define AT91_MCI_DTOMUL_1M (7 << 4)
|
|
|
|
#define AT91_MCI_SDCR 0x0c /* SD Card Register */
|
|
#define AT91_MCI_SDCSEL (3 << 0) /* SD Card Selector */
|
|
#define AT91_MCI_SDCBUS (1 << 7) /* 1-bit or 4-bit bus */
|
|
|
|
#define AT91_MCI_ARGR 0x10 /* Argument Register */
|
|
|
|
#define AT91_MCI_CMDR 0x14 /* Command Register */
|
|
#define AT91_MCI_CMDNB (0x3f << 0) /* Command Number */
|
|
#define AT91_MCI_RSPTYP (3 << 6) /* Response Type */
|
|
#define AT91_MCI_RSPTYP_NONE (0 << 6)
|
|
#define AT91_MCI_RSPTYP_48 (1 << 6)
|
|
#define AT91_MCI_RSPTYP_136 (2 << 6)
|
|
#define AT91_MCI_SPCMD (7 << 8) /* Special Command */
|
|
#define AT91_MCI_SPCMD_NONE (0 << 8)
|
|
#define AT91_MCI_SPCMD_INIT (1 << 8)
|
|
#define AT91_MCI_SPCMD_SYNC (2 << 8)
|
|
#define AT91_MCI_SPCMD_ICMD (4 << 8)
|
|
#define AT91_MCI_SPCMD_IRESP (5 << 8)
|
|
#define AT91_MCI_OPDCMD (1 << 11) /* Open Drain Command */
|
|
#define AT91_MCI_MAXLAT (1 << 12) /* Max Latency for Command to Response */
|
|
#define AT91_MCI_TRCMD (3 << 16) /* Transfer Command */
|
|
#define AT91_MCI_TRCMD_NONE (0 << 16)
|
|
#define AT91_MCI_TRCMD_START (1 << 16)
|
|
#define AT91_MCI_TRCMD_STOP (2 << 16)
|
|
#define AT91_MCI_TRDIR (1 << 18) /* Transfer Direction */
|
|
#define AT91_MCI_TRTYP (3 << 19) /* Transfer Type */
|
|
#define AT91_MCI_TRTYP_BLOCK (0 << 19)
|
|
#define AT91_MCI_TRTYP_MULTIPLE (1 << 19)
|
|
#define AT91_MCI_TRTYP_STREAM (2 << 19)
|
|
|
|
#define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */
|
|
#define AT91_MCR_RDR 0x30 /* Receive Data Register */
|
|
#define AT91_MCR_TDR 0x34 /* Transmit Data Register */
|
|
|
|
#define AT91_MCI_SR 0x40 /* Status Register */
|
|
#define AT91_MCI_CMDRDY (1 << 0) /* Command Ready */
|
|
#define AT91_MCI_RXRDY (1 << 1) /* Receiver Ready */
|
|
#define AT91_MCI_TXRDY (1 << 2) /* Transmit Ready */
|
|
#define AT91_MCI_BLKE (1 << 3) /* Data Block Ended */
|
|
#define AT91_MCI_DTIP (1 << 4) /* Data Transfer in Progress */
|
|
#define AT91_MCI_NOTBUSY (1 << 5) /* Data Not Busy */
|
|
#define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */
|
|
#define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */
|
|
#define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */
|
|
#define At91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B [AT91RM9200 only] */
|
|
#define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */
|
|
#define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */
|
|
#define AT91_MCI_RINDE (1 << 16) /* Response Index Error */
|
|
#define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */
|
|
#define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */
|
|
#define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */
|
|
#define AT91_MCI_RTOE (1 << 20) /* Reponse Time-out Error */
|
|
#define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */
|
|
#define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */
|
|
#define AT91_MCI_OVRE (1 << 30) /* Overrun */
|
|
#define AT91_MCI_UNRE (1 << 31) /* Underrun */
|
|
|
|
#define AT91_MCI_IER 0x44 /* Interrupt Enable Register */
|
|
#define AT91_MCI_IDR 0x48 /* Interrupt Disable Register */
|
|
#define AT91_MCI_IMR 0x4c /* Interrupt Mask Register */
|
|
|
|
#endif
|