15ac49b650
While trying to get a v3.5 kernel booted on the cubox, I noticed that VFP does not work correctly with VFP bounce handling. This is because of the confusion over 16-bit vs 32-bit instructions, and where PC is supposed to point to. The rule is that FP handlers are entered with regs->ARM_pc pointing at the _next_ instruction to be executed. However, if the exception is not handled, regs->ARM_pc points at the faulting instruction. This is easy for ARM mode, because we know that the next instruction and previous instructions are separated by four bytes. This is not true of Thumb2 though. Since all FP instructions are 32-bit in Thumb2, it makes things easy. We just need to select the appropriate adjustment. Do this by moving the adjustment out of do_undefinstr() into the assembly code, as only the assembly code knows whether it's dealing with a 32-bit or 16-bit instruction. Cc: <stable@vger.kernel.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
1192 lines
28 KiB
ArmAsm
1192 lines
28 KiB
ArmAsm
/*
|
|
* linux/arch/arm/kernel/entry-armv.S
|
|
*
|
|
* Copyright (C) 1996,1997,1998 Russell King.
|
|
* ARM700 fix by Matthew Godbolt (linux-user@willothewisp.demon.co.uk)
|
|
* nommu support by Hyok S. Choi (hyok.choi@samsung.com)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Low-level vector interface routines
|
|
*
|
|
* Note: there is a StrongARM bug in the STMIA rn, {regs}^ instruction
|
|
* that causes it to save wrong values... Be aware!
|
|
*/
|
|
|
|
#include <asm/assembler.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/glue-df.h>
|
|
#include <asm/glue-pf.h>
|
|
#include <asm/vfpmacros.h>
|
|
#ifndef CONFIG_MULTI_IRQ_HANDLER
|
|
#include <mach/entry-macro.S>
|
|
#endif
|
|
#include <asm/thread_notify.h>
|
|
#include <asm/unwind.h>
|
|
#include <asm/unistd.h>
|
|
#include <asm/tls.h>
|
|
#include <asm/system_info.h>
|
|
|
|
#include "entry-header.S"
|
|
#include <asm/entry-macro-multi.S>
|
|
|
|
/*
|
|
* Interrupt handling.
|
|
*/
|
|
.macro irq_handler
|
|
#ifdef CONFIG_MULTI_IRQ_HANDLER
|
|
ldr r1, =handle_arch_irq
|
|
mov r0, sp
|
|
adr lr, BSYM(9997f)
|
|
ldr pc, [r1]
|
|
#else
|
|
arch_irq_handler_default
|
|
#endif
|
|
9997:
|
|
.endm
|
|
|
|
.macro pabt_helper
|
|
@ PABORT handler takes pt_regs in r2, fault address in r4 and psr in r5
|
|
#ifdef MULTI_PABORT
|
|
ldr ip, .LCprocfns
|
|
mov lr, pc
|
|
ldr pc, [ip, #PROCESSOR_PABT_FUNC]
|
|
#else
|
|
bl CPU_PABORT_HANDLER
|
|
#endif
|
|
.endm
|
|
|
|
.macro dabt_helper
|
|
|
|
@
|
|
@ Call the processor-specific abort handler:
|
|
@
|
|
@ r2 - pt_regs
|
|
@ r4 - aborted context pc
|
|
@ r5 - aborted context psr
|
|
@
|
|
@ The abort handler must return the aborted address in r0, and
|
|
@ the fault status register in r1. r9 must be preserved.
|
|
@
|
|
#ifdef MULTI_DABORT
|
|
ldr ip, .LCprocfns
|
|
mov lr, pc
|
|
ldr pc, [ip, #PROCESSOR_DABT_FUNC]
|
|
#else
|
|
bl CPU_DABORT_HANDLER
|
|
#endif
|
|
.endm
|
|
|
|
#ifdef CONFIG_KPROBES
|
|
.section .kprobes.text,"ax",%progbits
|
|
#else
|
|
.text
|
|
#endif
|
|
|
|
/*
|
|
* Invalid mode handlers
|
|
*/
|
|
.macro inv_entry, reason
|
|
sub sp, sp, #S_FRAME_SIZE
|
|
ARM( stmib sp, {r1 - lr} )
|
|
THUMB( stmia sp, {r0 - r12} )
|
|
THUMB( str sp, [sp, #S_SP] )
|
|
THUMB( str lr, [sp, #S_LR] )
|
|
mov r1, #\reason
|
|
.endm
|
|
|
|
__pabt_invalid:
|
|
inv_entry BAD_PREFETCH
|
|
b common_invalid
|
|
ENDPROC(__pabt_invalid)
|
|
|
|
__dabt_invalid:
|
|
inv_entry BAD_DATA
|
|
b common_invalid
|
|
ENDPROC(__dabt_invalid)
|
|
|
|
__irq_invalid:
|
|
inv_entry BAD_IRQ
|
|
b common_invalid
|
|
ENDPROC(__irq_invalid)
|
|
|
|
__und_invalid:
|
|
inv_entry BAD_UNDEFINSTR
|
|
|
|
@
|
|
@ XXX fall through to common_invalid
|
|
@
|
|
|
|
@
|
|
@ common_invalid - generic code for failed exception (re-entrant version of handlers)
|
|
@
|
|
common_invalid:
|
|
zero_fp
|
|
|
|
ldmia r0, {r4 - r6}
|
|
add r0, sp, #S_PC @ here for interlock avoidance
|
|
mov r7, #-1 @ "" "" "" ""
|
|
str r4, [sp] @ save preserved r0
|
|
stmia r0, {r5 - r7} @ lr_<exception>,
|
|
@ cpsr_<exception>, "old_r0"
|
|
|
|
mov r0, sp
|
|
b bad_mode
|
|
ENDPROC(__und_invalid)
|
|
|
|
/*
|
|
* SVC mode handlers
|
|
*/
|
|
|
|
#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
|
|
#define SPFIX(code...) code
|
|
#else
|
|
#define SPFIX(code...)
|
|
#endif
|
|
|
|
.macro svc_entry, stack_hole=0
|
|
UNWIND(.fnstart )
|
|
UNWIND(.save {r0 - pc} )
|
|
sub sp, sp, #(S_FRAME_SIZE + \stack_hole - 4)
|
|
#ifdef CONFIG_THUMB2_KERNEL
|
|
SPFIX( str r0, [sp] ) @ temporarily saved
|
|
SPFIX( mov r0, sp )
|
|
SPFIX( tst r0, #4 ) @ test original stack alignment
|
|
SPFIX( ldr r0, [sp] ) @ restored
|
|
#else
|
|
SPFIX( tst sp, #4 )
|
|
#endif
|
|
SPFIX( subeq sp, sp, #4 )
|
|
stmia sp, {r1 - r12}
|
|
|
|
ldmia r0, {r3 - r5}
|
|
add r7, sp, #S_SP - 4 @ here for interlock avoidance
|
|
mov r6, #-1 @ "" "" "" ""
|
|
add r2, sp, #(S_FRAME_SIZE + \stack_hole - 4)
|
|
SPFIX( addeq r2, r2, #4 )
|
|
str r3, [sp, #-4]! @ save the "real" r0 copied
|
|
@ from the exception stack
|
|
|
|
mov r3, lr
|
|
|
|
@
|
|
@ We are now ready to fill in the remaining blanks on the stack:
|
|
@
|
|
@ r2 - sp_svc
|
|
@ r3 - lr_svc
|
|
@ r4 - lr_<exception>, already fixed up for correct return/restart
|
|
@ r5 - spsr_<exception>
|
|
@ r6 - orig_r0 (see pt_regs definition in ptrace.h)
|
|
@
|
|
stmia r7, {r2 - r6}
|
|
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
bl trace_hardirqs_off
|
|
#endif
|
|
.endm
|
|
|
|
.align 5
|
|
__dabt_svc:
|
|
svc_entry
|
|
mov r2, sp
|
|
dabt_helper
|
|
|
|
@
|
|
@ IRQs off again before pulling preserved data off the stack
|
|
@
|
|
disable_irq_notrace
|
|
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
tst r5, #PSR_I_BIT
|
|
bleq trace_hardirqs_on
|
|
tst r5, #PSR_I_BIT
|
|
blne trace_hardirqs_off
|
|
#endif
|
|
svc_exit r5 @ return from exception
|
|
UNWIND(.fnend )
|
|
ENDPROC(__dabt_svc)
|
|
|
|
.align 5
|
|
__irq_svc:
|
|
svc_entry
|
|
irq_handler
|
|
|
|
#ifdef CONFIG_PREEMPT
|
|
get_thread_info tsk
|
|
ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
|
|
ldr r0, [tsk, #TI_FLAGS] @ get flags
|
|
teq r8, #0 @ if preempt count != 0
|
|
movne r0, #0 @ force flags to 0
|
|
tst r0, #_TIF_NEED_RESCHED
|
|
blne svc_preempt
|
|
#endif
|
|
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
@ The parent context IRQs must have been enabled to get here in
|
|
@ the first place, so there's no point checking the PSR I bit.
|
|
bl trace_hardirqs_on
|
|
#endif
|
|
svc_exit r5 @ return from exception
|
|
UNWIND(.fnend )
|
|
ENDPROC(__irq_svc)
|
|
|
|
.ltorg
|
|
|
|
#ifdef CONFIG_PREEMPT
|
|
svc_preempt:
|
|
mov r8, lr
|
|
1: bl preempt_schedule_irq @ irq en/disable is done inside
|
|
ldr r0, [tsk, #TI_FLAGS] @ get new tasks TI_FLAGS
|
|
tst r0, #_TIF_NEED_RESCHED
|
|
moveq pc, r8 @ go again
|
|
b 1b
|
|
#endif
|
|
|
|
__und_fault:
|
|
@ Correct the PC such that it is pointing at the instruction
|
|
@ which caused the fault. If the faulting instruction was ARM
|
|
@ the PC will be pointing at the next instruction, and have to
|
|
@ subtract 4. Otherwise, it is Thumb, and the PC will be
|
|
@ pointing at the second half of the Thumb instruction. We
|
|
@ have to subtract 2.
|
|
ldr r2, [r0, #S_PC]
|
|
sub r2, r2, r1
|
|
str r2, [r0, #S_PC]
|
|
b do_undefinstr
|
|
ENDPROC(__und_fault)
|
|
|
|
.align 5
|
|
__und_svc:
|
|
#ifdef CONFIG_KPROBES
|
|
@ If a kprobe is about to simulate a "stmdb sp..." instruction,
|
|
@ it obviously needs free stack space which then will belong to
|
|
@ the saved context.
|
|
svc_entry 64
|
|
#else
|
|
svc_entry
|
|
#endif
|
|
@
|
|
@ call emulation code, which returns using r9 if it has emulated
|
|
@ the instruction, or the more conventional lr if we are to treat
|
|
@ this as a real undefined instruction
|
|
@
|
|
@ r0 - instruction
|
|
@
|
|
#ifndef CONFIG_THUMB2_KERNEL
|
|
ldr r0, [r4, #-4]
|
|
#else
|
|
mov r1, #2
|
|
ldrh r0, [r4, #-2] @ Thumb instruction at LR - 2
|
|
cmp r0, #0xe800 @ 32-bit instruction if xx >= 0
|
|
blo __und_svc_fault
|
|
ldrh r9, [r4] @ bottom 16 bits
|
|
add r4, r4, #2
|
|
str r4, [sp, #S_PC]
|
|
orr r0, r9, r0, lsl #16
|
|
#endif
|
|
adr r9, BSYM(__und_svc_finish)
|
|
mov r2, r4
|
|
bl call_fpe
|
|
|
|
mov r1, #4 @ PC correction to apply
|
|
__und_svc_fault:
|
|
mov r0, sp @ struct pt_regs *regs
|
|
bl __und_fault
|
|
|
|
@
|
|
@ IRQs off again before pulling preserved data off the stack
|
|
@
|
|
__und_svc_finish:
|
|
disable_irq_notrace
|
|
|
|
@
|
|
@ restore SPSR and restart the instruction
|
|
@
|
|
ldr r5, [sp, #S_PSR] @ Get SVC cpsr
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
tst r5, #PSR_I_BIT
|
|
bleq trace_hardirqs_on
|
|
tst r5, #PSR_I_BIT
|
|
blne trace_hardirqs_off
|
|
#endif
|
|
svc_exit r5 @ return from exception
|
|
UNWIND(.fnend )
|
|
ENDPROC(__und_svc)
|
|
|
|
.align 5
|
|
__pabt_svc:
|
|
svc_entry
|
|
mov r2, sp @ regs
|
|
pabt_helper
|
|
|
|
@
|
|
@ IRQs off again before pulling preserved data off the stack
|
|
@
|
|
disable_irq_notrace
|
|
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
tst r5, #PSR_I_BIT
|
|
bleq trace_hardirqs_on
|
|
tst r5, #PSR_I_BIT
|
|
blne trace_hardirqs_off
|
|
#endif
|
|
svc_exit r5 @ return from exception
|
|
UNWIND(.fnend )
|
|
ENDPROC(__pabt_svc)
|
|
|
|
.align 5
|
|
.LCcralign:
|
|
.word cr_alignment
|
|
#ifdef MULTI_DABORT
|
|
.LCprocfns:
|
|
.word processor
|
|
#endif
|
|
.LCfp:
|
|
.word fp_enter
|
|
|
|
/*
|
|
* User mode handlers
|
|
*
|
|
* EABI note: sp_svc is always 64-bit aligned here, so should S_FRAME_SIZE
|
|
*/
|
|
|
|
#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) && (S_FRAME_SIZE & 7)
|
|
#error "sizeof(struct pt_regs) must be a multiple of 8"
|
|
#endif
|
|
|
|
.macro usr_entry
|
|
UNWIND(.fnstart )
|
|
UNWIND(.cantunwind ) @ don't unwind the user space
|
|
sub sp, sp, #S_FRAME_SIZE
|
|
ARM( stmib sp, {r1 - r12} )
|
|
THUMB( stmia sp, {r0 - r12} )
|
|
|
|
ldmia r0, {r3 - r5}
|
|
add r0, sp, #S_PC @ here for interlock avoidance
|
|
mov r6, #-1 @ "" "" "" ""
|
|
|
|
str r3, [sp] @ save the "real" r0 copied
|
|
@ from the exception stack
|
|
|
|
@
|
|
@ We are now ready to fill in the remaining blanks on the stack:
|
|
@
|
|
@ r4 - lr_<exception>, already fixed up for correct return/restart
|
|
@ r5 - spsr_<exception>
|
|
@ r6 - orig_r0 (see pt_regs definition in ptrace.h)
|
|
@
|
|
@ Also, separately save sp_usr and lr_usr
|
|
@
|
|
stmia r0, {r4 - r6}
|
|
ARM( stmdb r0, {sp, lr}^ )
|
|
THUMB( store_user_sp_lr r0, r1, S_SP - S_PC )
|
|
|
|
@
|
|
@ Enable the alignment trap while in kernel mode
|
|
@
|
|
alignment_trap r0
|
|
|
|
@
|
|
@ Clear FP to mark the first stack frame
|
|
@
|
|
zero_fp
|
|
|
|
#ifdef CONFIG_IRQSOFF_TRACER
|
|
bl trace_hardirqs_off
|
|
#endif
|
|
.endm
|
|
|
|
.macro kuser_cmpxchg_check
|
|
#if !defined(CONFIG_CPU_32v6K) && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
|
|
#ifndef CONFIG_MMU
|
|
#warning "NPTL on non MMU needs fixing"
|
|
#else
|
|
@ Make sure our user space atomic helper is restarted
|
|
@ if it was interrupted in a critical region. Here we
|
|
@ perform a quick test inline since it should be false
|
|
@ 99.9999% of the time. The rest is done out of line.
|
|
cmp r4, #TASK_SIZE
|
|
blhs kuser_cmpxchg64_fixup
|
|
#endif
|
|
#endif
|
|
.endm
|
|
|
|
.align 5
|
|
__dabt_usr:
|
|
usr_entry
|
|
kuser_cmpxchg_check
|
|
mov r2, sp
|
|
dabt_helper
|
|
b ret_from_exception
|
|
UNWIND(.fnend )
|
|
ENDPROC(__dabt_usr)
|
|
|
|
.align 5
|
|
__irq_usr:
|
|
usr_entry
|
|
kuser_cmpxchg_check
|
|
irq_handler
|
|
get_thread_info tsk
|
|
mov why, #0
|
|
b ret_to_user_from_irq
|
|
UNWIND(.fnend )
|
|
ENDPROC(__irq_usr)
|
|
|
|
.ltorg
|
|
|
|
.align 5
|
|
__und_usr:
|
|
usr_entry
|
|
|
|
mov r2, r4
|
|
mov r3, r5
|
|
|
|
@ r2 = regs->ARM_pc, which is either 2 or 4 bytes ahead of the
|
|
@ faulting instruction depending on Thumb mode.
|
|
@ r3 = regs->ARM_cpsr
|
|
@
|
|
@ The emulation code returns using r9 if it has emulated the
|
|
@ instruction, or the more conventional lr if we are to treat
|
|
@ this as a real undefined instruction
|
|
@
|
|
adr r9, BSYM(ret_from_exception)
|
|
|
|
tst r3, #PSR_T_BIT @ Thumb mode?
|
|
bne __und_usr_thumb
|
|
sub r4, r2, #4 @ ARM instr at LR - 4
|
|
1: ldrt r0, [r4]
|
|
#ifdef CONFIG_CPU_ENDIAN_BE8
|
|
rev r0, r0 @ little endian instruction
|
|
#endif
|
|
@ r0 = 32-bit ARM instruction which caused the exception
|
|
@ r2 = PC value for the following instruction (:= regs->ARM_pc)
|
|
@ r4 = PC value for the faulting instruction
|
|
@ lr = 32-bit undefined instruction function
|
|
adr lr, BSYM(__und_usr_fault_32)
|
|
b call_fpe
|
|
|
|
__und_usr_thumb:
|
|
@ Thumb instruction
|
|
sub r4, r2, #2 @ First half of thumb instr at LR - 2
|
|
#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
|
|
/*
|
|
* Thumb-2 instruction handling. Note that because pre-v6 and >= v6 platforms
|
|
* can never be supported in a single kernel, this code is not applicable at
|
|
* all when __LINUX_ARM_ARCH__ < 6. This allows simplifying assumptions to be
|
|
* made about .arch directives.
|
|
*/
|
|
#if __LINUX_ARM_ARCH__ < 7
|
|
/* If the target CPU may not be Thumb-2-capable, a run-time check is needed: */
|
|
#define NEED_CPU_ARCHITECTURE
|
|
ldr r5, .LCcpu_architecture
|
|
ldr r5, [r5]
|
|
cmp r5, #CPU_ARCH_ARMv7
|
|
blo __und_usr_fault_16 @ 16bit undefined instruction
|
|
/*
|
|
* The following code won't get run unless the running CPU really is v7, so
|
|
* coding round the lack of ldrht on older arches is pointless. Temporarily
|
|
* override the assembler target arch with the minimum required instead:
|
|
*/
|
|
.arch armv6t2
|
|
#endif
|
|
2: ldrht r5, [r4]
|
|
cmp r5, #0xe800 @ 32bit instruction if xx != 0
|
|
blo __und_usr_fault_16 @ 16bit undefined instruction
|
|
3: ldrht r0, [r2]
|
|
add r2, r2, #2 @ r2 is PC + 2, make it PC + 4
|
|
str r2, [sp, #S_PC] @ it's a 2x16bit instr, update
|
|
orr r0, r0, r5, lsl #16
|
|
adr lr, BSYM(__und_usr_fault_32)
|
|
@ r0 = the two 16-bit Thumb instructions which caused the exception
|
|
@ r2 = PC value for the following Thumb instruction (:= regs->ARM_pc)
|
|
@ r4 = PC value for the first 16-bit Thumb instruction
|
|
@ lr = 32bit undefined instruction function
|
|
|
|
#if __LINUX_ARM_ARCH__ < 7
|
|
/* If the target arch was overridden, change it back: */
|
|
#ifdef CONFIG_CPU_32v6K
|
|
.arch armv6k
|
|
#else
|
|
.arch armv6
|
|
#endif
|
|
#endif /* __LINUX_ARM_ARCH__ < 7 */
|
|
#else /* !(CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7) */
|
|
b __und_usr_fault_16
|
|
#endif
|
|
UNWIND(.fnend)
|
|
ENDPROC(__und_usr)
|
|
|
|
/*
|
|
* The out of line fixup for the ldrt instructions above.
|
|
*/
|
|
.pushsection .fixup, "ax"
|
|
.align 2
|
|
4: mov pc, r9
|
|
.popsection
|
|
.pushsection __ex_table,"a"
|
|
.long 1b, 4b
|
|
#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
|
|
.long 2b, 4b
|
|
.long 3b, 4b
|
|
#endif
|
|
.popsection
|
|
|
|
/*
|
|
* Check whether the instruction is a co-processor instruction.
|
|
* If yes, we need to call the relevant co-processor handler.
|
|
*
|
|
* Note that we don't do a full check here for the co-processor
|
|
* instructions; all instructions with bit 27 set are well
|
|
* defined. The only instructions that should fault are the
|
|
* co-processor instructions. However, we have to watch out
|
|
* for the ARM6/ARM7 SWI bug.
|
|
*
|
|
* NEON is a special case that has to be handled here. Not all
|
|
* NEON instructions are co-processor instructions, so we have
|
|
* to make a special case of checking for them. Plus, there's
|
|
* five groups of them, so we have a table of mask/opcode pairs
|
|
* to check against, and if any match then we branch off into the
|
|
* NEON handler code.
|
|
*
|
|
* Emulators may wish to make use of the following registers:
|
|
* r0 = instruction opcode (32-bit ARM or two 16-bit Thumb)
|
|
* r2 = PC value to resume execution after successful emulation
|
|
* r9 = normal "successful" return address
|
|
* r10 = this threads thread_info structure
|
|
* lr = unrecognised instruction return address
|
|
* IRQs disabled, FIQs enabled.
|
|
*/
|
|
@
|
|
@ Fall-through from Thumb-2 __und_usr
|
|
@
|
|
#ifdef CONFIG_NEON
|
|
adr r6, .LCneon_thumb_opcodes
|
|
b 2f
|
|
#endif
|
|
call_fpe:
|
|
#ifdef CONFIG_NEON
|
|
adr r6, .LCneon_arm_opcodes
|
|
2:
|
|
ldr r7, [r6], #4 @ mask value
|
|
cmp r7, #0 @ end mask?
|
|
beq 1f
|
|
and r8, r0, r7
|
|
ldr r7, [r6], #4 @ opcode bits matching in mask
|
|
cmp r8, r7 @ NEON instruction?
|
|
bne 2b
|
|
get_thread_info r10
|
|
mov r7, #1
|
|
strb r7, [r10, #TI_USED_CP + 10] @ mark CP#10 as used
|
|
strb r7, [r10, #TI_USED_CP + 11] @ mark CP#11 as used
|
|
b do_vfp @ let VFP handler handle this
|
|
1:
|
|
#endif
|
|
tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27
|
|
tstne r0, #0x04000000 @ bit 26 set on both ARM and Thumb-2
|
|
moveq pc, lr
|
|
get_thread_info r10 @ get current thread
|
|
and r8, r0, #0x00000f00 @ mask out CP number
|
|
THUMB( lsr r8, r8, #8 )
|
|
mov r7, #1
|
|
add r6, r10, #TI_USED_CP
|
|
ARM( strb r7, [r6, r8, lsr #8] ) @ set appropriate used_cp[]
|
|
THUMB( strb r7, [r6, r8] ) @ set appropriate used_cp[]
|
|
#ifdef CONFIG_IWMMXT
|
|
@ Test if we need to give access to iWMMXt coprocessors
|
|
ldr r5, [r10, #TI_FLAGS]
|
|
rsbs r7, r8, #(1 << 8) @ CP 0 or 1 only
|
|
movcss r7, r5, lsr #(TIF_USING_IWMMXT + 1)
|
|
bcs iwmmxt_task_enable
|
|
#endif
|
|
ARM( add pc, pc, r8, lsr #6 )
|
|
THUMB( lsl r8, r8, #2 )
|
|
THUMB( add pc, r8 )
|
|
nop
|
|
|
|
movw_pc lr @ CP#0
|
|
W(b) do_fpe @ CP#1 (FPE)
|
|
W(b) do_fpe @ CP#2 (FPE)
|
|
movw_pc lr @ CP#3
|
|
#ifdef CONFIG_CRUNCH
|
|
b crunch_task_enable @ CP#4 (MaverickCrunch)
|
|
b crunch_task_enable @ CP#5 (MaverickCrunch)
|
|
b crunch_task_enable @ CP#6 (MaverickCrunch)
|
|
#else
|
|
movw_pc lr @ CP#4
|
|
movw_pc lr @ CP#5
|
|
movw_pc lr @ CP#6
|
|
#endif
|
|
movw_pc lr @ CP#7
|
|
movw_pc lr @ CP#8
|
|
movw_pc lr @ CP#9
|
|
#ifdef CONFIG_VFP
|
|
W(b) do_vfp @ CP#10 (VFP)
|
|
W(b) do_vfp @ CP#11 (VFP)
|
|
#else
|
|
movw_pc lr @ CP#10 (VFP)
|
|
movw_pc lr @ CP#11 (VFP)
|
|
#endif
|
|
movw_pc lr @ CP#12
|
|
movw_pc lr @ CP#13
|
|
movw_pc lr @ CP#14 (Debug)
|
|
movw_pc lr @ CP#15 (Control)
|
|
|
|
#ifdef NEED_CPU_ARCHITECTURE
|
|
.align 2
|
|
.LCcpu_architecture:
|
|
.word __cpu_architecture
|
|
#endif
|
|
|
|
#ifdef CONFIG_NEON
|
|
.align 6
|
|
|
|
.LCneon_arm_opcodes:
|
|
.word 0xfe000000 @ mask
|
|
.word 0xf2000000 @ opcode
|
|
|
|
.word 0xff100000 @ mask
|
|
.word 0xf4000000 @ opcode
|
|
|
|
.word 0x00000000 @ mask
|
|
.word 0x00000000 @ opcode
|
|
|
|
.LCneon_thumb_opcodes:
|
|
.word 0xef000000 @ mask
|
|
.word 0xef000000 @ opcode
|
|
|
|
.word 0xff100000 @ mask
|
|
.word 0xf9000000 @ opcode
|
|
|
|
.word 0x00000000 @ mask
|
|
.word 0x00000000 @ opcode
|
|
#endif
|
|
|
|
do_fpe:
|
|
enable_irq
|
|
ldr r4, .LCfp
|
|
add r10, r10, #TI_FPSTATE @ r10 = workspace
|
|
ldr pc, [r4] @ Call FP module USR entry point
|
|
|
|
/*
|
|
* The FP module is called with these registers set:
|
|
* r0 = instruction
|
|
* r2 = PC+4
|
|
* r9 = normal "successful" return address
|
|
* r10 = FP workspace
|
|
* lr = unrecognised FP instruction return address
|
|
*/
|
|
|
|
.pushsection .data
|
|
ENTRY(fp_enter)
|
|
.word no_fp
|
|
.popsection
|
|
|
|
ENTRY(no_fp)
|
|
mov pc, lr
|
|
ENDPROC(no_fp)
|
|
|
|
__und_usr_fault_32:
|
|
mov r1, #4
|
|
b 1f
|
|
__und_usr_fault_16:
|
|
mov r1, #2
|
|
1: enable_irq
|
|
mov r0, sp
|
|
adr lr, BSYM(ret_from_exception)
|
|
b __und_fault
|
|
ENDPROC(__und_usr_fault_32)
|
|
ENDPROC(__und_usr_fault_16)
|
|
|
|
.align 5
|
|
__pabt_usr:
|
|
usr_entry
|
|
mov r2, sp @ regs
|
|
pabt_helper
|
|
UNWIND(.fnend )
|
|
/* fall through */
|
|
/*
|
|
* This is the return code to user mode for abort handlers
|
|
*/
|
|
ENTRY(ret_from_exception)
|
|
UNWIND(.fnstart )
|
|
UNWIND(.cantunwind )
|
|
get_thread_info tsk
|
|
mov why, #0
|
|
b ret_to_user
|
|
UNWIND(.fnend )
|
|
ENDPROC(__pabt_usr)
|
|
ENDPROC(ret_from_exception)
|
|
|
|
/*
|
|
* Register switch for ARMv3 and ARMv4 processors
|
|
* r0 = previous task_struct, r1 = previous thread_info, r2 = next thread_info
|
|
* previous and next are guaranteed not to be the same.
|
|
*/
|
|
ENTRY(__switch_to)
|
|
UNWIND(.fnstart )
|
|
UNWIND(.cantunwind )
|
|
add ip, r1, #TI_CPU_SAVE
|
|
ldr r3, [r2, #TI_TP_VALUE]
|
|
ARM( stmia ip!, {r4 - sl, fp, sp, lr} ) @ Store most regs on stack
|
|
THUMB( stmia ip!, {r4 - sl, fp} ) @ Store most regs on stack
|
|
THUMB( str sp, [ip], #4 )
|
|
THUMB( str lr, [ip], #4 )
|
|
#ifdef CONFIG_CPU_USE_DOMAINS
|
|
ldr r6, [r2, #TI_CPU_DOMAIN]
|
|
#endif
|
|
set_tls r3, r4, r5
|
|
#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
|
|
ldr r7, [r2, #TI_TASK]
|
|
ldr r8, =__stack_chk_guard
|
|
ldr r7, [r7, #TSK_STACK_CANARY]
|
|
#endif
|
|
#ifdef CONFIG_CPU_USE_DOMAINS
|
|
mcr p15, 0, r6, c3, c0, 0 @ Set domain register
|
|
#endif
|
|
mov r5, r0
|
|
add r4, r2, #TI_CPU_SAVE
|
|
ldr r0, =thread_notify_head
|
|
mov r1, #THREAD_NOTIFY_SWITCH
|
|
bl atomic_notifier_call_chain
|
|
#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
|
|
str r7, [r8]
|
|
#endif
|
|
THUMB( mov ip, r4 )
|
|
mov r0, r5
|
|
ARM( ldmia r4, {r4 - sl, fp, sp, pc} ) @ Load all regs saved previously
|
|
THUMB( ldmia ip!, {r4 - sl, fp} ) @ Load all regs saved previously
|
|
THUMB( ldr sp, [ip], #4 )
|
|
THUMB( ldr pc, [ip] )
|
|
UNWIND(.fnend )
|
|
ENDPROC(__switch_to)
|
|
|
|
__INIT
|
|
|
|
/*
|
|
* User helpers.
|
|
*
|
|
* Each segment is 32-byte aligned and will be moved to the top of the high
|
|
* vector page. New segments (if ever needed) must be added in front of
|
|
* existing ones. This mechanism should be used only for things that are
|
|
* really small and justified, and not be abused freely.
|
|
*
|
|
* See Documentation/arm/kernel_user_helpers.txt for formal definitions.
|
|
*/
|
|
THUMB( .arm )
|
|
|
|
.macro usr_ret, reg
|
|
#ifdef CONFIG_ARM_THUMB
|
|
bx \reg
|
|
#else
|
|
mov pc, \reg
|
|
#endif
|
|
.endm
|
|
|
|
.align 5
|
|
.globl __kuser_helper_start
|
|
__kuser_helper_start:
|
|
|
|
/*
|
|
* Due to the length of some sequences, __kuser_cmpxchg64 spans 2 regular
|
|
* kuser "slots", therefore 0xffff0f80 is not used as a valid entry point.
|
|
*/
|
|
|
|
__kuser_cmpxchg64: @ 0xffff0f60
|
|
|
|
#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
|
|
|
|
/*
|
|
* Poor you. No fast solution possible...
|
|
* The kernel itself must perform the operation.
|
|
* A special ghost syscall is used for that (see traps.c).
|
|
*/
|
|
stmfd sp!, {r7, lr}
|
|
ldr r7, 1f @ it's 20 bits
|
|
swi __ARM_NR_cmpxchg64
|
|
ldmfd sp!, {r7, pc}
|
|
1: .word __ARM_NR_cmpxchg64
|
|
|
|
#elif defined(CONFIG_CPU_32v6K)
|
|
|
|
stmfd sp!, {r4, r5, r6, r7}
|
|
ldrd r4, r5, [r0] @ load old val
|
|
ldrd r6, r7, [r1] @ load new val
|
|
smp_dmb arm
|
|
1: ldrexd r0, r1, [r2] @ load current val
|
|
eors r3, r0, r4 @ compare with oldval (1)
|
|
eoreqs r3, r1, r5 @ compare with oldval (2)
|
|
strexdeq r3, r6, r7, [r2] @ store newval if eq
|
|
teqeq r3, #1 @ success?
|
|
beq 1b @ if no then retry
|
|
smp_dmb arm
|
|
rsbs r0, r3, #0 @ set returned val and C flag
|
|
ldmfd sp!, {r4, r5, r6, r7}
|
|
usr_ret lr
|
|
|
|
#elif !defined(CONFIG_SMP)
|
|
|
|
#ifdef CONFIG_MMU
|
|
|
|
/*
|
|
* The only thing that can break atomicity in this cmpxchg64
|
|
* implementation is either an IRQ or a data abort exception
|
|
* causing another process/thread to be scheduled in the middle of
|
|
* the critical sequence. The same strategy as for cmpxchg is used.
|
|
*/
|
|
stmfd sp!, {r4, r5, r6, lr}
|
|
ldmia r0, {r4, r5} @ load old val
|
|
ldmia r1, {r6, lr} @ load new val
|
|
1: ldmia r2, {r0, r1} @ load current val
|
|
eors r3, r0, r4 @ compare with oldval (1)
|
|
eoreqs r3, r1, r5 @ compare with oldval (2)
|
|
2: stmeqia r2, {r6, lr} @ store newval if eq
|
|
rsbs r0, r3, #0 @ set return val and C flag
|
|
ldmfd sp!, {r4, r5, r6, pc}
|
|
|
|
.text
|
|
kuser_cmpxchg64_fixup:
|
|
@ Called from kuser_cmpxchg_fixup.
|
|
@ r4 = address of interrupted insn (must be preserved).
|
|
@ sp = saved regs. r7 and r8 are clobbered.
|
|
@ 1b = first critical insn, 2b = last critical insn.
|
|
@ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b.
|
|
mov r7, #0xffff0fff
|
|
sub r7, r7, #(0xffff0fff - (0xffff0f60 + (1b - __kuser_cmpxchg64)))
|
|
subs r8, r4, r7
|
|
rsbcss r8, r8, #(2b - 1b)
|
|
strcs r7, [sp, #S_PC]
|
|
#if __LINUX_ARM_ARCH__ < 6
|
|
bcc kuser_cmpxchg32_fixup
|
|
#endif
|
|
mov pc, lr
|
|
.previous
|
|
|
|
#else
|
|
#warning "NPTL on non MMU needs fixing"
|
|
mov r0, #-1
|
|
adds r0, r0, #0
|
|
usr_ret lr
|
|
#endif
|
|
|
|
#else
|
|
#error "incoherent kernel configuration"
|
|
#endif
|
|
|
|
/* pad to next slot */
|
|
.rept (16 - (. - __kuser_cmpxchg64)/4)
|
|
.word 0
|
|
.endr
|
|
|
|
.align 5
|
|
|
|
__kuser_memory_barrier: @ 0xffff0fa0
|
|
smp_dmb arm
|
|
usr_ret lr
|
|
|
|
.align 5
|
|
|
|
__kuser_cmpxchg: @ 0xffff0fc0
|
|
|
|
#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
|
|
|
|
/*
|
|
* Poor you. No fast solution possible...
|
|
* The kernel itself must perform the operation.
|
|
* A special ghost syscall is used for that (see traps.c).
|
|
*/
|
|
stmfd sp!, {r7, lr}
|
|
ldr r7, 1f @ it's 20 bits
|
|
swi __ARM_NR_cmpxchg
|
|
ldmfd sp!, {r7, pc}
|
|
1: .word __ARM_NR_cmpxchg
|
|
|
|
#elif __LINUX_ARM_ARCH__ < 6
|
|
|
|
#ifdef CONFIG_MMU
|
|
|
|
/*
|
|
* The only thing that can break atomicity in this cmpxchg
|
|
* implementation is either an IRQ or a data abort exception
|
|
* causing another process/thread to be scheduled in the middle
|
|
* of the critical sequence. To prevent this, code is added to
|
|
* the IRQ and data abort exception handlers to set the pc back
|
|
* to the beginning of the critical section if it is found to be
|
|
* within that critical section (see kuser_cmpxchg_fixup).
|
|
*/
|
|
1: ldr r3, [r2] @ load current val
|
|
subs r3, r3, r0 @ compare with oldval
|
|
2: streq r1, [r2] @ store newval if eq
|
|
rsbs r0, r3, #0 @ set return val and C flag
|
|
usr_ret lr
|
|
|
|
.text
|
|
kuser_cmpxchg32_fixup:
|
|
@ Called from kuser_cmpxchg_check macro.
|
|
@ r4 = address of interrupted insn (must be preserved).
|
|
@ sp = saved regs. r7 and r8 are clobbered.
|
|
@ 1b = first critical insn, 2b = last critical insn.
|
|
@ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b.
|
|
mov r7, #0xffff0fff
|
|
sub r7, r7, #(0xffff0fff - (0xffff0fc0 + (1b - __kuser_cmpxchg)))
|
|
subs r8, r4, r7
|
|
rsbcss r8, r8, #(2b - 1b)
|
|
strcs r7, [sp, #S_PC]
|
|
mov pc, lr
|
|
.previous
|
|
|
|
#else
|
|
#warning "NPTL on non MMU needs fixing"
|
|
mov r0, #-1
|
|
adds r0, r0, #0
|
|
usr_ret lr
|
|
#endif
|
|
|
|
#else
|
|
|
|
smp_dmb arm
|
|
1: ldrex r3, [r2]
|
|
subs r3, r3, r0
|
|
strexeq r3, r1, [r2]
|
|
teqeq r3, #1
|
|
beq 1b
|
|
rsbs r0, r3, #0
|
|
/* beware -- each __kuser slot must be 8 instructions max */
|
|
ALT_SMP(b __kuser_memory_barrier)
|
|
ALT_UP(usr_ret lr)
|
|
|
|
#endif
|
|
|
|
.align 5
|
|
|
|
__kuser_get_tls: @ 0xffff0fe0
|
|
ldr r0, [pc, #(16 - 8)] @ read TLS, set in kuser_get_tls_init
|
|
usr_ret lr
|
|
mrc p15, 0, r0, c13, c0, 3 @ 0xffff0fe8 hardware TLS code
|
|
.rep 4
|
|
.word 0 @ 0xffff0ff0 software TLS value, then
|
|
.endr @ pad up to __kuser_helper_version
|
|
|
|
__kuser_helper_version: @ 0xffff0ffc
|
|
.word ((__kuser_helper_end - __kuser_helper_start) >> 5)
|
|
|
|
.globl __kuser_helper_end
|
|
__kuser_helper_end:
|
|
|
|
THUMB( .thumb )
|
|
|
|
/*
|
|
* Vector stubs.
|
|
*
|
|
* This code is copied to 0xffff0200 so we can use branches in the
|
|
* vectors, rather than ldr's. Note that this code must not
|
|
* exceed 0x300 bytes.
|
|
*
|
|
* Common stub entry macro:
|
|
* Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
|
|
*
|
|
* SP points to a minimal amount of processor-private memory, the address
|
|
* of which is copied into r0 for the mode specific abort handler.
|
|
*/
|
|
.macro vector_stub, name, mode, correction=0
|
|
.align 5
|
|
|
|
vector_\name:
|
|
.if \correction
|
|
sub lr, lr, #\correction
|
|
.endif
|
|
|
|
@
|
|
@ Save r0, lr_<exception> (parent PC) and spsr_<exception>
|
|
@ (parent CPSR)
|
|
@
|
|
stmia sp, {r0, lr} @ save r0, lr
|
|
mrs lr, spsr
|
|
str lr, [sp, #8] @ save spsr
|
|
|
|
@
|
|
@ Prepare for SVC32 mode. IRQs remain disabled.
|
|
@
|
|
mrs r0, cpsr
|
|
eor r0, r0, #(\mode ^ SVC_MODE | PSR_ISETSTATE)
|
|
msr spsr_cxsf, r0
|
|
|
|
@
|
|
@ the branch table must immediately follow this code
|
|
@
|
|
and lr, lr, #0x0f
|
|
THUMB( adr r0, 1f )
|
|
THUMB( ldr lr, [r0, lr, lsl #2] )
|
|
mov r0, sp
|
|
ARM( ldr lr, [pc, lr, lsl #2] )
|
|
movs pc, lr @ branch to handler in SVC mode
|
|
ENDPROC(vector_\name)
|
|
|
|
.align 2
|
|
@ handler addresses follow this label
|
|
1:
|
|
.endm
|
|
|
|
.globl __stubs_start
|
|
__stubs_start:
|
|
/*
|
|
* Interrupt dispatcher
|
|
*/
|
|
vector_stub irq, IRQ_MODE, 4
|
|
|
|
.long __irq_usr @ 0 (USR_26 / USR_32)
|
|
.long __irq_invalid @ 1 (FIQ_26 / FIQ_32)
|
|
.long __irq_invalid @ 2 (IRQ_26 / IRQ_32)
|
|
.long __irq_svc @ 3 (SVC_26 / SVC_32)
|
|
.long __irq_invalid @ 4
|
|
.long __irq_invalid @ 5
|
|
.long __irq_invalid @ 6
|
|
.long __irq_invalid @ 7
|
|
.long __irq_invalid @ 8
|
|
.long __irq_invalid @ 9
|
|
.long __irq_invalid @ a
|
|
.long __irq_invalid @ b
|
|
.long __irq_invalid @ c
|
|
.long __irq_invalid @ d
|
|
.long __irq_invalid @ e
|
|
.long __irq_invalid @ f
|
|
|
|
/*
|
|
* Data abort dispatcher
|
|
* Enter in ABT mode, spsr = USR CPSR, lr = USR PC
|
|
*/
|
|
vector_stub dabt, ABT_MODE, 8
|
|
|
|
.long __dabt_usr @ 0 (USR_26 / USR_32)
|
|
.long __dabt_invalid @ 1 (FIQ_26 / FIQ_32)
|
|
.long __dabt_invalid @ 2 (IRQ_26 / IRQ_32)
|
|
.long __dabt_svc @ 3 (SVC_26 / SVC_32)
|
|
.long __dabt_invalid @ 4
|
|
.long __dabt_invalid @ 5
|
|
.long __dabt_invalid @ 6
|
|
.long __dabt_invalid @ 7
|
|
.long __dabt_invalid @ 8
|
|
.long __dabt_invalid @ 9
|
|
.long __dabt_invalid @ a
|
|
.long __dabt_invalid @ b
|
|
.long __dabt_invalid @ c
|
|
.long __dabt_invalid @ d
|
|
.long __dabt_invalid @ e
|
|
.long __dabt_invalid @ f
|
|
|
|
/*
|
|
* Prefetch abort dispatcher
|
|
* Enter in ABT mode, spsr = USR CPSR, lr = USR PC
|
|
*/
|
|
vector_stub pabt, ABT_MODE, 4
|
|
|
|
.long __pabt_usr @ 0 (USR_26 / USR_32)
|
|
.long __pabt_invalid @ 1 (FIQ_26 / FIQ_32)
|
|
.long __pabt_invalid @ 2 (IRQ_26 / IRQ_32)
|
|
.long __pabt_svc @ 3 (SVC_26 / SVC_32)
|
|
.long __pabt_invalid @ 4
|
|
.long __pabt_invalid @ 5
|
|
.long __pabt_invalid @ 6
|
|
.long __pabt_invalid @ 7
|
|
.long __pabt_invalid @ 8
|
|
.long __pabt_invalid @ 9
|
|
.long __pabt_invalid @ a
|
|
.long __pabt_invalid @ b
|
|
.long __pabt_invalid @ c
|
|
.long __pabt_invalid @ d
|
|
.long __pabt_invalid @ e
|
|
.long __pabt_invalid @ f
|
|
|
|
/*
|
|
* Undef instr entry dispatcher
|
|
* Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
|
|
*/
|
|
vector_stub und, UND_MODE
|
|
|
|
.long __und_usr @ 0 (USR_26 / USR_32)
|
|
.long __und_invalid @ 1 (FIQ_26 / FIQ_32)
|
|
.long __und_invalid @ 2 (IRQ_26 / IRQ_32)
|
|
.long __und_svc @ 3 (SVC_26 / SVC_32)
|
|
.long __und_invalid @ 4
|
|
.long __und_invalid @ 5
|
|
.long __und_invalid @ 6
|
|
.long __und_invalid @ 7
|
|
.long __und_invalid @ 8
|
|
.long __und_invalid @ 9
|
|
.long __und_invalid @ a
|
|
.long __und_invalid @ b
|
|
.long __und_invalid @ c
|
|
.long __und_invalid @ d
|
|
.long __und_invalid @ e
|
|
.long __und_invalid @ f
|
|
|
|
.align 5
|
|
|
|
/*=============================================================================
|
|
* Undefined FIQs
|
|
*-----------------------------------------------------------------------------
|
|
* Enter in FIQ mode, spsr = ANY CPSR, lr = ANY PC
|
|
* MUST PRESERVE SVC SPSR, but need to switch to SVC mode to show our msg.
|
|
* Basically to switch modes, we *HAVE* to clobber one register... brain
|
|
* damage alert! I don't think that we can execute any code in here in any
|
|
* other mode than FIQ... Ok you can switch to another mode, but you can't
|
|
* get out of that mode without clobbering one register.
|
|
*/
|
|
vector_fiq:
|
|
subs pc, lr, #4
|
|
|
|
/*=============================================================================
|
|
* Address exception handler
|
|
*-----------------------------------------------------------------------------
|
|
* These aren't too critical.
|
|
* (they're not supposed to happen, and won't happen in 32-bit data mode).
|
|
*/
|
|
|
|
vector_addrexcptn:
|
|
b vector_addrexcptn
|
|
|
|
/*
|
|
* We group all the following data together to optimise
|
|
* for CPUs with separate I & D caches.
|
|
*/
|
|
.align 5
|
|
|
|
.LCvswi:
|
|
.word vector_swi
|
|
|
|
.globl __stubs_end
|
|
__stubs_end:
|
|
|
|
.equ stubs_offset, __vectors_start + 0x200 - __stubs_start
|
|
|
|
.globl __vectors_start
|
|
__vectors_start:
|
|
ARM( swi SYS_ERROR0 )
|
|
THUMB( svc #0 )
|
|
THUMB( nop )
|
|
W(b) vector_und + stubs_offset
|
|
W(ldr) pc, .LCvswi + stubs_offset
|
|
W(b) vector_pabt + stubs_offset
|
|
W(b) vector_dabt + stubs_offset
|
|
W(b) vector_addrexcptn + stubs_offset
|
|
W(b) vector_irq + stubs_offset
|
|
W(b) vector_fiq + stubs_offset
|
|
|
|
.globl __vectors_end
|
|
__vectors_end:
|
|
|
|
.data
|
|
|
|
.globl cr_alignment
|
|
.globl cr_no_alignment
|
|
cr_alignment:
|
|
.space 4
|
|
cr_no_alignment:
|
|
.space 4
|
|
|
|
#ifdef CONFIG_MULTI_IRQ_HANDLER
|
|
.globl handle_arch_irq
|
|
handle_arch_irq:
|
|
.space 4
|
|
#endif
|