d0320f7500
I believe these error messages are already logged on allocation failure by warn_alloc_failed and so get a dump_stack on OOM. Remove the unnecessary additional error logging. Around these deletions: o Alignment neatening. o Remove unnecessary casts of dma_alloc_coherent. o Hoist assigns from ifs. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
960 lines
26 KiB
C
960 lines
26 KiB
C
/*
|
|
* Copyright (C) 2005 - 2013 Emulex
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License version 2
|
|
* as published by the Free Software Foundation. The full GNU General
|
|
* Public License is included in this distribution in the file called COPYING.
|
|
*
|
|
* Contact Information:
|
|
* linux-drivers@emulex.com
|
|
*
|
|
* Emulex
|
|
* 3333 Susan Street
|
|
* Costa Mesa, CA 92626
|
|
*/
|
|
|
|
#include "be.h"
|
|
#include "be_cmds.h"
|
|
#include <linux/ethtool.h>
|
|
|
|
struct be_ethtool_stat {
|
|
char desc[ETH_GSTRING_LEN];
|
|
int type;
|
|
int size;
|
|
int offset;
|
|
};
|
|
|
|
enum {DRVSTAT_TX, DRVSTAT_RX, DRVSTAT};
|
|
#define FIELDINFO(_struct, field) FIELD_SIZEOF(_struct, field), \
|
|
offsetof(_struct, field)
|
|
#define DRVSTAT_TX_INFO(field) #field, DRVSTAT_TX,\
|
|
FIELDINFO(struct be_tx_stats, field)
|
|
#define DRVSTAT_RX_INFO(field) #field, DRVSTAT_RX,\
|
|
FIELDINFO(struct be_rx_stats, field)
|
|
#define DRVSTAT_INFO(field) #field, DRVSTAT,\
|
|
FIELDINFO(struct be_drv_stats, field)
|
|
|
|
static const struct be_ethtool_stat et_stats[] = {
|
|
{DRVSTAT_INFO(rx_crc_errors)},
|
|
{DRVSTAT_INFO(rx_alignment_symbol_errors)},
|
|
{DRVSTAT_INFO(rx_pause_frames)},
|
|
{DRVSTAT_INFO(rx_control_frames)},
|
|
/* Received packets dropped when the Ethernet length field
|
|
* is not equal to the actual Ethernet data length.
|
|
*/
|
|
{DRVSTAT_INFO(rx_in_range_errors)},
|
|
/* Received packets dropped when their length field is >= 1501 bytes
|
|
* and <= 1535 bytes.
|
|
*/
|
|
{DRVSTAT_INFO(rx_out_range_errors)},
|
|
/* Received packets dropped when they are longer than 9216 bytes */
|
|
{DRVSTAT_INFO(rx_frame_too_long)},
|
|
/* Received packets dropped when they don't pass the unicast or
|
|
* multicast address filtering.
|
|
*/
|
|
{DRVSTAT_INFO(rx_address_mismatch_drops)},
|
|
/* Received packets dropped when IP packet length field is less than
|
|
* the IP header length field.
|
|
*/
|
|
{DRVSTAT_INFO(rx_dropped_too_small)},
|
|
/* Received packets dropped when IP length field is greater than
|
|
* the actual packet length.
|
|
*/
|
|
{DRVSTAT_INFO(rx_dropped_too_short)},
|
|
/* Received packets dropped when the IP header length field is less
|
|
* than 5.
|
|
*/
|
|
{DRVSTAT_INFO(rx_dropped_header_too_small)},
|
|
/* Received packets dropped when the TCP header length field is less
|
|
* than 5 or the TCP header length + IP header length is more
|
|
* than IP packet length.
|
|
*/
|
|
{DRVSTAT_INFO(rx_dropped_tcp_length)},
|
|
{DRVSTAT_INFO(rx_dropped_runt)},
|
|
/* Number of received packets dropped when a fifo for descriptors going
|
|
* into the packet demux block overflows. In normal operation, this
|
|
* fifo must never overflow.
|
|
*/
|
|
{DRVSTAT_INFO(rxpp_fifo_overflow_drop)},
|
|
{DRVSTAT_INFO(rx_input_fifo_overflow_drop)},
|
|
{DRVSTAT_INFO(rx_ip_checksum_errs)},
|
|
{DRVSTAT_INFO(rx_tcp_checksum_errs)},
|
|
{DRVSTAT_INFO(rx_udp_checksum_errs)},
|
|
{DRVSTAT_INFO(tx_pauseframes)},
|
|
{DRVSTAT_INFO(tx_controlframes)},
|
|
{DRVSTAT_INFO(rx_priority_pause_frames)},
|
|
/* Received packets dropped when an internal fifo going into
|
|
* main packet buffer tank (PMEM) overflows.
|
|
*/
|
|
{DRVSTAT_INFO(pmem_fifo_overflow_drop)},
|
|
{DRVSTAT_INFO(jabber_events)},
|
|
/* Received packets dropped due to lack of available HW packet buffers
|
|
* used to temporarily hold the received packets.
|
|
*/
|
|
{DRVSTAT_INFO(rx_drops_no_pbuf)},
|
|
/* Received packets dropped due to input receive buffer
|
|
* descriptor fifo overflowing.
|
|
*/
|
|
{DRVSTAT_INFO(rx_drops_no_erx_descr)},
|
|
/* Packets dropped because the internal FIFO to the offloaded TCP
|
|
* receive processing block is full. This could happen only for
|
|
* offloaded iSCSI or FCoE trarffic.
|
|
*/
|
|
{DRVSTAT_INFO(rx_drops_no_tpre_descr)},
|
|
/* Received packets dropped when they need more than 8
|
|
* receive buffers. This cannot happen as the driver configures
|
|
* 2048 byte receive buffers.
|
|
*/
|
|
{DRVSTAT_INFO(rx_drops_too_many_frags)},
|
|
{DRVSTAT_INFO(forwarded_packets)},
|
|
/* Received packets dropped when the frame length
|
|
* is more than 9018 bytes
|
|
*/
|
|
{DRVSTAT_INFO(rx_drops_mtu)},
|
|
/* Number of packets dropped due to random early drop function */
|
|
{DRVSTAT_INFO(eth_red_drops)},
|
|
{DRVSTAT_INFO(be_on_die_temperature)}
|
|
};
|
|
#define ETHTOOL_STATS_NUM ARRAY_SIZE(et_stats)
|
|
|
|
/* Stats related to multi RX queues: get_stats routine assumes bytes, pkts
|
|
* are first and second members respectively.
|
|
*/
|
|
static const struct be_ethtool_stat et_rx_stats[] = {
|
|
{DRVSTAT_RX_INFO(rx_bytes)},/* If moving this member see above note */
|
|
{DRVSTAT_RX_INFO(rx_pkts)}, /* If moving this member see above note */
|
|
{DRVSTAT_RX_INFO(rx_compl)},
|
|
{DRVSTAT_RX_INFO(rx_mcast_pkts)},
|
|
/* Number of page allocation failures while posting receive buffers
|
|
* to HW.
|
|
*/
|
|
{DRVSTAT_RX_INFO(rx_post_fail)},
|
|
/* Recevied packets dropped due to skb allocation failure */
|
|
{DRVSTAT_RX_INFO(rx_drops_no_skbs)},
|
|
/* Received packets dropped due to lack of available fetched buffers
|
|
* posted by the driver.
|
|
*/
|
|
{DRVSTAT_RX_INFO(rx_drops_no_frags)}
|
|
};
|
|
#define ETHTOOL_RXSTATS_NUM (ARRAY_SIZE(et_rx_stats))
|
|
|
|
/* Stats related to multi TX queues: get_stats routine assumes compl is the
|
|
* first member
|
|
*/
|
|
static const struct be_ethtool_stat et_tx_stats[] = {
|
|
{DRVSTAT_TX_INFO(tx_compl)}, /* If moving this member see above note */
|
|
{DRVSTAT_TX_INFO(tx_bytes)},
|
|
{DRVSTAT_TX_INFO(tx_pkts)},
|
|
/* Number of skbs queued for trasmission by the driver */
|
|
{DRVSTAT_TX_INFO(tx_reqs)},
|
|
/* Number of TX work request blocks DMAed to HW */
|
|
{DRVSTAT_TX_INFO(tx_wrbs)},
|
|
/* Number of times the TX queue was stopped due to lack
|
|
* of spaces in the TXQ.
|
|
*/
|
|
{DRVSTAT_TX_INFO(tx_stops)}
|
|
};
|
|
#define ETHTOOL_TXSTATS_NUM (ARRAY_SIZE(et_tx_stats))
|
|
|
|
static const char et_self_tests[][ETH_GSTRING_LEN] = {
|
|
"MAC Loopback test",
|
|
"PHY Loopback test",
|
|
"External Loopback test",
|
|
"DDR DMA test",
|
|
"Link test"
|
|
};
|
|
|
|
#define ETHTOOL_TESTS_NUM ARRAY_SIZE(et_self_tests)
|
|
#define BE_MAC_LOOPBACK 0x0
|
|
#define BE_PHY_LOOPBACK 0x1
|
|
#define BE_ONE_PORT_EXT_LOOPBACK 0x2
|
|
#define BE_NO_LOOPBACK 0xff
|
|
|
|
static void be_get_drvinfo(struct net_device *netdev,
|
|
struct ethtool_drvinfo *drvinfo)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
char fw_on_flash[FW_VER_LEN];
|
|
|
|
memset(fw_on_flash, 0 , sizeof(fw_on_flash));
|
|
be_cmd_get_fw_ver(adapter, adapter->fw_ver, fw_on_flash);
|
|
|
|
strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver));
|
|
strlcpy(drvinfo->version, DRV_VER, sizeof(drvinfo->version));
|
|
if (!memcmp(adapter->fw_ver, fw_on_flash, FW_VER_LEN))
|
|
strlcpy(drvinfo->fw_version, adapter->fw_ver,
|
|
sizeof(drvinfo->fw_version));
|
|
else
|
|
snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
|
|
"%s [%s]", adapter->fw_ver, fw_on_flash);
|
|
|
|
strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
|
|
sizeof(drvinfo->bus_info));
|
|
drvinfo->testinfo_len = 0;
|
|
drvinfo->regdump_len = 0;
|
|
drvinfo->eedump_len = 0;
|
|
}
|
|
|
|
static u32
|
|
lancer_cmd_get_file_len(struct be_adapter *adapter, u8 *file_name)
|
|
{
|
|
u32 data_read = 0, eof;
|
|
u8 addn_status;
|
|
struct be_dma_mem data_len_cmd;
|
|
int status;
|
|
|
|
memset(&data_len_cmd, 0, sizeof(data_len_cmd));
|
|
/* data_offset and data_size should be 0 to get reg len */
|
|
status = lancer_cmd_read_object(adapter, &data_len_cmd, 0, 0,
|
|
file_name, &data_read, &eof, &addn_status);
|
|
|
|
return data_read;
|
|
}
|
|
|
|
static int
|
|
lancer_cmd_read_file(struct be_adapter *adapter, u8 *file_name,
|
|
u32 buf_len, void *buf)
|
|
{
|
|
struct be_dma_mem read_cmd;
|
|
u32 read_len = 0, total_read_len = 0, chunk_size;
|
|
u32 eof = 0;
|
|
u8 addn_status;
|
|
int status = 0;
|
|
|
|
read_cmd.size = LANCER_READ_FILE_CHUNK;
|
|
read_cmd.va = pci_alloc_consistent(adapter->pdev, read_cmd.size,
|
|
&read_cmd.dma);
|
|
|
|
if (!read_cmd.va) {
|
|
dev_err(&adapter->pdev->dev,
|
|
"Memory allocation failure while reading dump\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
while ((total_read_len < buf_len) && !eof) {
|
|
chunk_size = min_t(u32, (buf_len - total_read_len),
|
|
LANCER_READ_FILE_CHUNK);
|
|
chunk_size = ALIGN(chunk_size, 4);
|
|
status = lancer_cmd_read_object(adapter, &read_cmd, chunk_size,
|
|
total_read_len, file_name, &read_len,
|
|
&eof, &addn_status);
|
|
if (!status) {
|
|
memcpy(buf + total_read_len, read_cmd.va, read_len);
|
|
total_read_len += read_len;
|
|
eof &= LANCER_READ_FILE_EOF_MASK;
|
|
} else {
|
|
status = -EIO;
|
|
break;
|
|
}
|
|
}
|
|
pci_free_consistent(adapter->pdev, read_cmd.size, read_cmd.va,
|
|
read_cmd.dma);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int
|
|
be_get_reg_len(struct net_device *netdev)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
u32 log_size = 0;
|
|
|
|
if (!check_privilege(adapter, MAX_PRIVILEGES))
|
|
return 0;
|
|
|
|
if (be_physfn(adapter)) {
|
|
if (lancer_chip(adapter))
|
|
log_size = lancer_cmd_get_file_len(adapter,
|
|
LANCER_FW_DUMP_FILE);
|
|
else
|
|
be_cmd_get_reg_len(adapter, &log_size);
|
|
}
|
|
return log_size;
|
|
}
|
|
|
|
static void
|
|
be_get_regs(struct net_device *netdev, struct ethtool_regs *regs, void *buf)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
|
|
if (be_physfn(adapter)) {
|
|
memset(buf, 0, regs->len);
|
|
if (lancer_chip(adapter))
|
|
lancer_cmd_read_file(adapter, LANCER_FW_DUMP_FILE,
|
|
regs->len, buf);
|
|
else
|
|
be_cmd_get_regs(adapter, regs->len, buf);
|
|
}
|
|
}
|
|
|
|
static int be_get_coalesce(struct net_device *netdev,
|
|
struct ethtool_coalesce *et)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
struct be_eq_obj *eqo = &adapter->eq_obj[0];
|
|
|
|
|
|
et->rx_coalesce_usecs = eqo->cur_eqd;
|
|
et->rx_coalesce_usecs_high = eqo->max_eqd;
|
|
et->rx_coalesce_usecs_low = eqo->min_eqd;
|
|
|
|
et->tx_coalesce_usecs = eqo->cur_eqd;
|
|
et->tx_coalesce_usecs_high = eqo->max_eqd;
|
|
et->tx_coalesce_usecs_low = eqo->min_eqd;
|
|
|
|
et->use_adaptive_rx_coalesce = eqo->enable_aic;
|
|
et->use_adaptive_tx_coalesce = eqo->enable_aic;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* TX attributes are ignored. Only RX attributes are considered
|
|
* eqd cmd is issued in the worker thread.
|
|
*/
|
|
static int be_set_coalesce(struct net_device *netdev,
|
|
struct ethtool_coalesce *et)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
struct be_eq_obj *eqo;
|
|
int i;
|
|
|
|
for_all_evt_queues(adapter, eqo, i) {
|
|
eqo->enable_aic = et->use_adaptive_rx_coalesce;
|
|
eqo->max_eqd = min(et->rx_coalesce_usecs_high, BE_MAX_EQD);
|
|
eqo->min_eqd = min(et->rx_coalesce_usecs_low, eqo->max_eqd);
|
|
eqo->eqd = et->rx_coalesce_usecs;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
be_get_ethtool_stats(struct net_device *netdev,
|
|
struct ethtool_stats *stats, uint64_t *data)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
struct be_rx_obj *rxo;
|
|
struct be_tx_obj *txo;
|
|
void *p;
|
|
unsigned int i, j, base = 0, start;
|
|
|
|
for (i = 0; i < ETHTOOL_STATS_NUM; i++) {
|
|
p = (u8 *)&adapter->drv_stats + et_stats[i].offset;
|
|
data[i] = *(u32 *)p;
|
|
}
|
|
base += ETHTOOL_STATS_NUM;
|
|
|
|
for_all_rx_queues(adapter, rxo, j) {
|
|
struct be_rx_stats *stats = rx_stats(rxo);
|
|
|
|
do {
|
|
start = u64_stats_fetch_begin_bh(&stats->sync);
|
|
data[base] = stats->rx_bytes;
|
|
data[base + 1] = stats->rx_pkts;
|
|
} while (u64_stats_fetch_retry_bh(&stats->sync, start));
|
|
|
|
for (i = 2; i < ETHTOOL_RXSTATS_NUM; i++) {
|
|
p = (u8 *)stats + et_rx_stats[i].offset;
|
|
data[base + i] = *(u32 *)p;
|
|
}
|
|
base += ETHTOOL_RXSTATS_NUM;
|
|
}
|
|
|
|
for_all_tx_queues(adapter, txo, j) {
|
|
struct be_tx_stats *stats = tx_stats(txo);
|
|
|
|
do {
|
|
start = u64_stats_fetch_begin_bh(&stats->sync_compl);
|
|
data[base] = stats->tx_compl;
|
|
} while (u64_stats_fetch_retry_bh(&stats->sync_compl, start));
|
|
|
|
do {
|
|
start = u64_stats_fetch_begin_bh(&stats->sync);
|
|
for (i = 1; i < ETHTOOL_TXSTATS_NUM; i++) {
|
|
p = (u8 *)stats + et_tx_stats[i].offset;
|
|
data[base + i] =
|
|
(et_tx_stats[i].size == sizeof(u64)) ?
|
|
*(u64 *)p : *(u32 *)p;
|
|
}
|
|
} while (u64_stats_fetch_retry_bh(&stats->sync, start));
|
|
base += ETHTOOL_TXSTATS_NUM;
|
|
}
|
|
}
|
|
|
|
static void
|
|
be_get_stat_strings(struct net_device *netdev, uint32_t stringset,
|
|
uint8_t *data)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
int i, j;
|
|
|
|
switch (stringset) {
|
|
case ETH_SS_STATS:
|
|
for (i = 0; i < ETHTOOL_STATS_NUM; i++) {
|
|
memcpy(data, et_stats[i].desc, ETH_GSTRING_LEN);
|
|
data += ETH_GSTRING_LEN;
|
|
}
|
|
for (i = 0; i < adapter->num_rx_qs; i++) {
|
|
for (j = 0; j < ETHTOOL_RXSTATS_NUM; j++) {
|
|
sprintf(data, "rxq%d: %s", i,
|
|
et_rx_stats[j].desc);
|
|
data += ETH_GSTRING_LEN;
|
|
}
|
|
}
|
|
for (i = 0; i < adapter->num_tx_qs; i++) {
|
|
for (j = 0; j < ETHTOOL_TXSTATS_NUM; j++) {
|
|
sprintf(data, "txq%d: %s", i,
|
|
et_tx_stats[j].desc);
|
|
data += ETH_GSTRING_LEN;
|
|
}
|
|
}
|
|
break;
|
|
case ETH_SS_TEST:
|
|
for (i = 0; i < ETHTOOL_TESTS_NUM; i++) {
|
|
memcpy(data, et_self_tests[i], ETH_GSTRING_LEN);
|
|
data += ETH_GSTRING_LEN;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int be_get_sset_count(struct net_device *netdev, int stringset)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
|
|
switch (stringset) {
|
|
case ETH_SS_TEST:
|
|
return ETHTOOL_TESTS_NUM;
|
|
case ETH_SS_STATS:
|
|
return ETHTOOL_STATS_NUM +
|
|
adapter->num_rx_qs * ETHTOOL_RXSTATS_NUM +
|
|
adapter->num_tx_qs * ETHTOOL_TXSTATS_NUM;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static u32 be_get_port_type(u32 phy_type, u32 dac_cable_len)
|
|
{
|
|
u32 port;
|
|
|
|
switch (phy_type) {
|
|
case PHY_TYPE_BASET_1GB:
|
|
case PHY_TYPE_BASEX_1GB:
|
|
case PHY_TYPE_SGMII:
|
|
port = PORT_TP;
|
|
break;
|
|
case PHY_TYPE_SFP_PLUS_10GB:
|
|
port = dac_cable_len ? PORT_DA : PORT_FIBRE;
|
|
break;
|
|
case PHY_TYPE_XFP_10GB:
|
|
case PHY_TYPE_SFP_1GB:
|
|
port = PORT_FIBRE;
|
|
break;
|
|
case PHY_TYPE_BASET_10GB:
|
|
port = PORT_TP;
|
|
break;
|
|
default:
|
|
port = PORT_OTHER;
|
|
}
|
|
|
|
return port;
|
|
}
|
|
|
|
static u32 convert_to_et_setting(u32 if_type, u32 if_speeds)
|
|
{
|
|
u32 val = 0;
|
|
|
|
switch (if_type) {
|
|
case PHY_TYPE_BASET_1GB:
|
|
case PHY_TYPE_BASEX_1GB:
|
|
case PHY_TYPE_SGMII:
|
|
val |= SUPPORTED_TP;
|
|
if (if_speeds & BE_SUPPORTED_SPEED_1GBPS)
|
|
val |= SUPPORTED_1000baseT_Full;
|
|
if (if_speeds & BE_SUPPORTED_SPEED_100MBPS)
|
|
val |= SUPPORTED_100baseT_Full;
|
|
if (if_speeds & BE_SUPPORTED_SPEED_10MBPS)
|
|
val |= SUPPORTED_10baseT_Full;
|
|
break;
|
|
case PHY_TYPE_KX4_10GB:
|
|
val |= SUPPORTED_Backplane;
|
|
if (if_speeds & BE_SUPPORTED_SPEED_1GBPS)
|
|
val |= SUPPORTED_1000baseKX_Full;
|
|
if (if_speeds & BE_SUPPORTED_SPEED_10GBPS)
|
|
val |= SUPPORTED_10000baseKX4_Full;
|
|
break;
|
|
case PHY_TYPE_KR_10GB:
|
|
val |= SUPPORTED_Backplane |
|
|
SUPPORTED_10000baseKR_Full;
|
|
break;
|
|
case PHY_TYPE_SFP_PLUS_10GB:
|
|
case PHY_TYPE_XFP_10GB:
|
|
case PHY_TYPE_SFP_1GB:
|
|
val |= SUPPORTED_FIBRE;
|
|
if (if_speeds & BE_SUPPORTED_SPEED_10GBPS)
|
|
val |= SUPPORTED_10000baseT_Full;
|
|
if (if_speeds & BE_SUPPORTED_SPEED_1GBPS)
|
|
val |= SUPPORTED_1000baseT_Full;
|
|
break;
|
|
case PHY_TYPE_BASET_10GB:
|
|
val |= SUPPORTED_TP;
|
|
if (if_speeds & BE_SUPPORTED_SPEED_10GBPS)
|
|
val |= SUPPORTED_10000baseT_Full;
|
|
if (if_speeds & BE_SUPPORTED_SPEED_1GBPS)
|
|
val |= SUPPORTED_1000baseT_Full;
|
|
if (if_speeds & BE_SUPPORTED_SPEED_100MBPS)
|
|
val |= SUPPORTED_100baseT_Full;
|
|
break;
|
|
default:
|
|
val |= SUPPORTED_TP;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
bool be_pause_supported(struct be_adapter *adapter)
|
|
{
|
|
return (adapter->phy.interface_type == PHY_TYPE_SFP_PLUS_10GB ||
|
|
adapter->phy.interface_type == PHY_TYPE_XFP_10GB) ?
|
|
false : true;
|
|
}
|
|
|
|
static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
u8 link_status;
|
|
u16 link_speed = 0;
|
|
int status;
|
|
u32 auto_speeds;
|
|
u32 fixed_speeds;
|
|
u32 dac_cable_len;
|
|
u16 interface_type;
|
|
|
|
if (adapter->phy.link_speed < 0) {
|
|
status = be_cmd_link_status_query(adapter, &link_speed,
|
|
&link_status, 0);
|
|
if (!status)
|
|
be_link_status_update(adapter, link_status);
|
|
ethtool_cmd_speed_set(ecmd, link_speed);
|
|
|
|
status = be_cmd_get_phy_info(adapter);
|
|
if (!status) {
|
|
interface_type = adapter->phy.interface_type;
|
|
auto_speeds = adapter->phy.auto_speeds_supported;
|
|
fixed_speeds = adapter->phy.fixed_speeds_supported;
|
|
dac_cable_len = adapter->phy.dac_cable_len;
|
|
|
|
ecmd->supported =
|
|
convert_to_et_setting(interface_type,
|
|
auto_speeds |
|
|
fixed_speeds);
|
|
ecmd->advertising =
|
|
convert_to_et_setting(interface_type,
|
|
auto_speeds);
|
|
|
|
ecmd->port = be_get_port_type(interface_type,
|
|
dac_cable_len);
|
|
|
|
if (adapter->phy.auto_speeds_supported) {
|
|
ecmd->supported |= SUPPORTED_Autoneg;
|
|
ecmd->autoneg = AUTONEG_ENABLE;
|
|
ecmd->advertising |= ADVERTISED_Autoneg;
|
|
}
|
|
|
|
ecmd->supported |= SUPPORTED_Pause;
|
|
if (be_pause_supported(adapter))
|
|
ecmd->advertising |= ADVERTISED_Pause;
|
|
|
|
switch (adapter->phy.interface_type) {
|
|
case PHY_TYPE_KR_10GB:
|
|
case PHY_TYPE_KX4_10GB:
|
|
ecmd->transceiver = XCVR_INTERNAL;
|
|
break;
|
|
default:
|
|
ecmd->transceiver = XCVR_EXTERNAL;
|
|
break;
|
|
}
|
|
} else {
|
|
ecmd->port = PORT_OTHER;
|
|
ecmd->autoneg = AUTONEG_DISABLE;
|
|
ecmd->transceiver = XCVR_DUMMY1;
|
|
}
|
|
|
|
/* Save for future use */
|
|
adapter->phy.link_speed = ethtool_cmd_speed(ecmd);
|
|
adapter->phy.port_type = ecmd->port;
|
|
adapter->phy.transceiver = ecmd->transceiver;
|
|
adapter->phy.autoneg = ecmd->autoneg;
|
|
adapter->phy.advertising = ecmd->advertising;
|
|
adapter->phy.supported = ecmd->supported;
|
|
} else {
|
|
ethtool_cmd_speed_set(ecmd, adapter->phy.link_speed);
|
|
ecmd->port = adapter->phy.port_type;
|
|
ecmd->transceiver = adapter->phy.transceiver;
|
|
ecmd->autoneg = adapter->phy.autoneg;
|
|
ecmd->advertising = adapter->phy.advertising;
|
|
ecmd->supported = adapter->phy.supported;
|
|
}
|
|
|
|
ecmd->duplex = netif_carrier_ok(netdev) ? DUPLEX_FULL : DUPLEX_UNKNOWN;
|
|
ecmd->phy_address = adapter->port_num;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void be_get_ringparam(struct net_device *netdev,
|
|
struct ethtool_ringparam *ring)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
|
|
ring->rx_max_pending = ring->rx_pending = adapter->rx_obj[0].q.len;
|
|
ring->tx_max_pending = ring->tx_pending = adapter->tx_obj[0].q.len;
|
|
}
|
|
|
|
static void
|
|
be_get_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
|
|
be_cmd_get_flow_control(adapter, &ecmd->tx_pause, &ecmd->rx_pause);
|
|
ecmd->autoneg = adapter->phy.fc_autoneg;
|
|
}
|
|
|
|
static int
|
|
be_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
int status;
|
|
|
|
if (ecmd->autoneg != adapter->phy.fc_autoneg)
|
|
return -EINVAL;
|
|
adapter->tx_fc = ecmd->tx_pause;
|
|
adapter->rx_fc = ecmd->rx_pause;
|
|
|
|
status = be_cmd_set_flow_control(adapter,
|
|
adapter->tx_fc, adapter->rx_fc);
|
|
if (status)
|
|
dev_warn(&adapter->pdev->dev, "Pause param set failed.\n");
|
|
|
|
return status;
|
|
}
|
|
|
|
static int
|
|
be_set_phys_id(struct net_device *netdev,
|
|
enum ethtool_phys_id_state state)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
|
|
switch (state) {
|
|
case ETHTOOL_ID_ACTIVE:
|
|
be_cmd_get_beacon_state(adapter, adapter->hba_port_num,
|
|
&adapter->beacon_state);
|
|
return 1; /* cycle on/off once per second */
|
|
|
|
case ETHTOOL_ID_ON:
|
|
be_cmd_set_beacon_state(adapter, adapter->hba_port_num, 0, 0,
|
|
BEACON_STATE_ENABLED);
|
|
break;
|
|
|
|
case ETHTOOL_ID_OFF:
|
|
be_cmd_set_beacon_state(adapter, adapter->hba_port_num, 0, 0,
|
|
BEACON_STATE_DISABLED);
|
|
break;
|
|
|
|
case ETHTOOL_ID_INACTIVE:
|
|
be_cmd_set_beacon_state(adapter, adapter->hba_port_num, 0, 0,
|
|
adapter->beacon_state);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void
|
|
be_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
|
|
if (be_is_wol_supported(adapter)) {
|
|
wol->supported |= WAKE_MAGIC;
|
|
wol->wolopts |= WAKE_MAGIC;
|
|
} else
|
|
wol->wolopts = 0;
|
|
memset(&wol->sopass, 0, sizeof(wol->sopass));
|
|
}
|
|
|
|
static int
|
|
be_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
|
|
if (wol->wolopts & ~WAKE_MAGIC)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (!be_is_wol_supported(adapter)) {
|
|
dev_warn(&adapter->pdev->dev, "WOL not supported\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (wol->wolopts & WAKE_MAGIC)
|
|
adapter->wol = true;
|
|
else
|
|
adapter->wol = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
be_test_ddr_dma(struct be_adapter *adapter)
|
|
{
|
|
int ret, i;
|
|
struct be_dma_mem ddrdma_cmd;
|
|
static const u64 pattern[2] = {
|
|
0x5a5a5a5a5a5a5a5aULL, 0xa5a5a5a5a5a5a5a5ULL
|
|
};
|
|
|
|
ddrdma_cmd.size = sizeof(struct be_cmd_req_ddrdma_test);
|
|
ddrdma_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, ddrdma_cmd.size,
|
|
&ddrdma_cmd.dma, GFP_KERNEL);
|
|
if (!ddrdma_cmd.va)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
ret = be_cmd_ddr_dma_test(adapter, pattern[i],
|
|
4096, &ddrdma_cmd);
|
|
if (ret != 0)
|
|
goto err;
|
|
}
|
|
|
|
err:
|
|
dma_free_coherent(&adapter->pdev->dev, ddrdma_cmd.size, ddrdma_cmd.va,
|
|
ddrdma_cmd.dma);
|
|
return ret;
|
|
}
|
|
|
|
static u64 be_loopback_test(struct be_adapter *adapter, u8 loopback_type,
|
|
u64 *status)
|
|
{
|
|
be_cmd_set_loopback(adapter, adapter->hba_port_num,
|
|
loopback_type, 1);
|
|
*status = be_cmd_loopback_test(adapter, adapter->hba_port_num,
|
|
loopback_type, 1500,
|
|
2, 0xabc);
|
|
be_cmd_set_loopback(adapter, adapter->hba_port_num,
|
|
BE_NO_LOOPBACK, 1);
|
|
return *status;
|
|
}
|
|
|
|
static void
|
|
be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
int status;
|
|
u8 link_status = 0;
|
|
|
|
memset(data, 0, sizeof(u64) * ETHTOOL_TESTS_NUM);
|
|
|
|
if (test->flags & ETH_TEST_FL_OFFLINE) {
|
|
if (be_loopback_test(adapter, BE_MAC_LOOPBACK,
|
|
&data[0]) != 0) {
|
|
test->flags |= ETH_TEST_FL_FAILED;
|
|
}
|
|
if (be_loopback_test(adapter, BE_PHY_LOOPBACK,
|
|
&data[1]) != 0) {
|
|
test->flags |= ETH_TEST_FL_FAILED;
|
|
}
|
|
if (be_loopback_test(adapter, BE_ONE_PORT_EXT_LOOPBACK,
|
|
&data[2]) != 0) {
|
|
test->flags |= ETH_TEST_FL_FAILED;
|
|
}
|
|
}
|
|
|
|
if (!lancer_chip(adapter) && be_test_ddr_dma(adapter) != 0) {
|
|
data[3] = 1;
|
|
test->flags |= ETH_TEST_FL_FAILED;
|
|
}
|
|
|
|
status = be_cmd_link_status_query(adapter, NULL, &link_status, 0);
|
|
if (status) {
|
|
test->flags |= ETH_TEST_FL_FAILED;
|
|
data[4] = -1;
|
|
} else if (!link_status) {
|
|
test->flags |= ETH_TEST_FL_FAILED;
|
|
data[4] = 1;
|
|
}
|
|
}
|
|
|
|
static int
|
|
be_do_flash(struct net_device *netdev, struct ethtool_flash *efl)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
|
|
return be_load_fw(adapter, efl->data);
|
|
}
|
|
|
|
static int
|
|
be_get_eeprom_len(struct net_device *netdev)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
|
|
if (!check_privilege(adapter, MAX_PRIVILEGES))
|
|
return 0;
|
|
|
|
if (lancer_chip(adapter)) {
|
|
if (be_physfn(adapter))
|
|
return lancer_cmd_get_file_len(adapter,
|
|
LANCER_VPD_PF_FILE);
|
|
else
|
|
return lancer_cmd_get_file_len(adapter,
|
|
LANCER_VPD_VF_FILE);
|
|
} else {
|
|
return BE_READ_SEEPROM_LEN;
|
|
}
|
|
}
|
|
|
|
static int
|
|
be_read_eeprom(struct net_device *netdev, struct ethtool_eeprom *eeprom,
|
|
uint8_t *data)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
struct be_dma_mem eeprom_cmd;
|
|
struct be_cmd_resp_seeprom_read *resp;
|
|
int status;
|
|
|
|
if (!eeprom->len)
|
|
return -EINVAL;
|
|
|
|
if (lancer_chip(adapter)) {
|
|
if (be_physfn(adapter))
|
|
return lancer_cmd_read_file(adapter, LANCER_VPD_PF_FILE,
|
|
eeprom->len, data);
|
|
else
|
|
return lancer_cmd_read_file(adapter, LANCER_VPD_VF_FILE,
|
|
eeprom->len, data);
|
|
}
|
|
|
|
eeprom->magic = BE_VENDOR_ID | (adapter->pdev->device<<16);
|
|
|
|
memset(&eeprom_cmd, 0, sizeof(struct be_dma_mem));
|
|
eeprom_cmd.size = sizeof(struct be_cmd_req_seeprom_read);
|
|
eeprom_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, eeprom_cmd.size,
|
|
&eeprom_cmd.dma, GFP_KERNEL);
|
|
|
|
if (!eeprom_cmd.va)
|
|
return -ENOMEM;
|
|
|
|
status = be_cmd_get_seeprom_data(adapter, &eeprom_cmd);
|
|
|
|
if (!status) {
|
|
resp = eeprom_cmd.va;
|
|
memcpy(data, resp->seeprom_data + eeprom->offset, eeprom->len);
|
|
}
|
|
dma_free_coherent(&adapter->pdev->dev, eeprom_cmd.size, eeprom_cmd.va,
|
|
eeprom_cmd.dma);
|
|
|
|
return status;
|
|
}
|
|
|
|
static u32 be_get_msg_level(struct net_device *netdev)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
|
|
if (lancer_chip(adapter)) {
|
|
dev_err(&adapter->pdev->dev, "Operation not supported\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return adapter->msg_enable;
|
|
}
|
|
|
|
static void be_set_fw_log_level(struct be_adapter *adapter, u32 level)
|
|
{
|
|
struct be_dma_mem extfat_cmd;
|
|
struct be_fat_conf_params *cfgs;
|
|
int status;
|
|
int i, j;
|
|
|
|
memset(&extfat_cmd, 0, sizeof(struct be_dma_mem));
|
|
extfat_cmd.size = sizeof(struct be_cmd_resp_get_ext_fat_caps);
|
|
extfat_cmd.va = pci_alloc_consistent(adapter->pdev, extfat_cmd.size,
|
|
&extfat_cmd.dma);
|
|
if (!extfat_cmd.va) {
|
|
dev_err(&adapter->pdev->dev, "%s: Memory allocation failure\n",
|
|
__func__);
|
|
goto err;
|
|
}
|
|
status = be_cmd_get_ext_fat_capabilites(adapter, &extfat_cmd);
|
|
if (!status) {
|
|
cfgs = (struct be_fat_conf_params *)(extfat_cmd.va +
|
|
sizeof(struct be_cmd_resp_hdr));
|
|
for (i = 0; i < le32_to_cpu(cfgs->num_modules); i++) {
|
|
u32 num_modes = le32_to_cpu(cfgs->module[i].num_modes);
|
|
for (j = 0; j < num_modes; j++) {
|
|
if (cfgs->module[i].trace_lvl[j].mode ==
|
|
MODE_UART)
|
|
cfgs->module[i].trace_lvl[j].dbg_lvl =
|
|
cpu_to_le32(level);
|
|
}
|
|
}
|
|
status = be_cmd_set_ext_fat_capabilites(adapter, &extfat_cmd,
|
|
cfgs);
|
|
if (status)
|
|
dev_err(&adapter->pdev->dev,
|
|
"Message level set failed\n");
|
|
} else {
|
|
dev_err(&adapter->pdev->dev, "Message level get failed\n");
|
|
}
|
|
|
|
pci_free_consistent(adapter->pdev, extfat_cmd.size, extfat_cmd.va,
|
|
extfat_cmd.dma);
|
|
err:
|
|
return;
|
|
}
|
|
|
|
static void be_set_msg_level(struct net_device *netdev, u32 level)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
|
|
if (lancer_chip(adapter)) {
|
|
dev_err(&adapter->pdev->dev, "Operation not supported\n");
|
|
return;
|
|
}
|
|
|
|
if (adapter->msg_enable == level)
|
|
return;
|
|
|
|
if ((level & NETIF_MSG_HW) != (adapter->msg_enable & NETIF_MSG_HW))
|
|
be_set_fw_log_level(adapter, level & NETIF_MSG_HW ?
|
|
FW_LOG_LEVEL_DEFAULT : FW_LOG_LEVEL_FATAL);
|
|
adapter->msg_enable = level;
|
|
|
|
return;
|
|
}
|
|
|
|
const struct ethtool_ops be_ethtool_ops = {
|
|
.get_settings = be_get_settings,
|
|
.get_drvinfo = be_get_drvinfo,
|
|
.get_wol = be_get_wol,
|
|
.set_wol = be_set_wol,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_eeprom_len = be_get_eeprom_len,
|
|
.get_eeprom = be_read_eeprom,
|
|
.get_coalesce = be_get_coalesce,
|
|
.set_coalesce = be_set_coalesce,
|
|
.get_ringparam = be_get_ringparam,
|
|
.get_pauseparam = be_get_pauseparam,
|
|
.set_pauseparam = be_set_pauseparam,
|
|
.get_strings = be_get_stat_strings,
|
|
.set_phys_id = be_set_phys_id,
|
|
.get_msglevel = be_get_msg_level,
|
|
.set_msglevel = be_set_msg_level,
|
|
.get_sset_count = be_get_sset_count,
|
|
.get_ethtool_stats = be_get_ethtool_stats,
|
|
.get_regs_len = be_get_reg_len,
|
|
.get_regs = be_get_regs,
|
|
.flash_device = be_do_flash,
|
|
.self_test = be_self_test,
|
|
};
|