kernel-fxtec-pro1x/sound/isa/galaxy/azt2316.c
René Herman 495311927f ALSA: ISA: New Aztech Sound Galaxy driver
This is a new driver for Aztech Sound Galaxy ISA soundcards based on the
AZT1605 and AZT2316 chipsets. It's constructed as two seperate drivers
for either chipset generated from the same source file, with (very)
minimal ifdeffery.

The drivers check the SB DSP version to decide if they are being loaded
for the right chip. AZT1605 returns 2.1 by default and AZT2316 3.1.
This isn't full-proof as the DSP version can actually be set through
software but it's close enough -- as far as I've been able to see, the
DSP version can not be stored in the EEPROM and the cards will therefore
startup with the defaults.

This distinction could (with the same success rate) also be used to
decide which chip we're looking at at runtime meaning a single, merged
driver is also an option but I feel it's actually nicer this way. A
merged driver would have to postpone translating the passed in resource
values to the card configuration until it knew which one it was looking
at and would need to postpone erring out on mpu_irq=10 for azt1605 and
mpu_irq=3 for azt2316.

The drivers have been tested on various cards. For snd-azt1605:

FCC-ID I38-MMSN811: Aztech Sound Galaxy Nova 16 Extra
FCC-ID I38-MMSN822: Aztech Sound Galaxy Pro 16 II

and for snd-azt2316:

FCC-ID I38-MMSN824: Aztech Sound Galaxy Pro 16 AB
FCC-ID I38-MMSN826: Trust Sound Expert DeLuxe Wave 32 (05201)
FCC-ID I38-MMSN830: Trust Sound Expert DeLuxe 16+ (05202)
FCC-ID I38-MMSN837: Packard Bell ISA Soundcard 030069
FCC-ID I38-MMSN846: Trust Sound Expert DeLuxe 16-3D (06300)
FCC-ID I38-MMSN847: Trust Sound Expert DeLuxe Wave 32-3D (06301)
FCC-ID I38-MMSN852: Aztech Sound Galaxy Waverider Pro 32-3D

826 and 846 were also marketed directly by Aztech and then known as:

FCC-ID I38-MMSN826: Aztech Sound Galaxy Waverider 32+
FCC-ID I38-MMSN846: Aztech Sound Galaxy Nova 16 Extra II-3D

Together, these cover the AZT1605 and AT2316A, AZT2316R and AZT2316-S
chipsets. All cards work fully -- full-duplex PCM, MIDI and FM. Full
duplex is a little flaky on some.

I38-MSN811 tends to not work in full-duplex but sometimes does with the
highest success rate being achieved when you first start the capture and
then a playback instead of the other way around (it's a CS4231-KL
codec).

The cards with an AD1845XP codec (my I38-MMSN826 and one of my
I38-MMSN830s) are also somewhat duplex-challenged. Sometimes full-duplex
works, sometimes not and this varies from try to try. This seems likely
to be a timing problem somewhere inside wss-lib.

I38-MMSN826 has an additional "ICS2115 WaveFront" wavetable synth
onboard that isn't supported yet. The wavetable synths on I38-MMSN847
and I38-MMSN852 are wired directly to the standard MPU-401 UART and the
AUX1 input on the codec and work without problem.

CD-ROM audio on the cards is routed to the codec "Line" input, Line-In
to its Aux input, and FM/Wavetable to its AUX1 input. I did not rename
the controls due to the capture source enumeration: I see that
capture-source overrides are hardcoded in wss-lib and this is just too
ugly to live.

Versus the old snd-sgalaxy driver these drivers add support for the
models without a configuration EEPROM (which are common), full-duplex,
MPU-401 UART and OPL3. In the future they might grow support for that
ICS2115 WaveFront synth on 826 and an hwdep interface to write to the
EEPROM on the models that have one.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-13 12:57:58 +02:00

111 lines
3.6 KiB
C

/*
* Aztech AZT2316 Driver
* Copyright (C) 2007,2010 Rene Herman
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#define AZT2316
#define CRD_NAME "Aztech AZT2316"
#define DRV_NAME "AZT2316"
#define DEV_NAME "azt2316"
#define GALAXY_DSP_MAJOR 3
#define GALAXY_DSP_MINOR 1
#define GALAXY_CONFIG_SIZE 4
/*
* 32-bit config register
*/
#define GALAXY_CONFIG_SBA_220 (0 << 0)
#define GALAXY_CONFIG_SBA_240 (1 << 0)
#define GALAXY_CONFIG_SBA_260 (2 << 0)
#define GALAXY_CONFIG_SBA_280 (3 << 0)
#define GALAXY_CONFIG_SBA_MASK GALAXY_CONFIG_SBA_280
#define GALAXY_CONFIG_SBIRQ_2 (1 << 2)
#define GALAXY_CONFIG_SBIRQ_5 (1 << 3)
#define GALAXY_CONFIG_SBIRQ_7 (1 << 4)
#define GALAXY_CONFIG_SBIRQ_10 (1 << 5)
#define GALAXY_CONFIG_SBDMA_DISABLE (0 << 6)
#define GALAXY_CONFIG_SBDMA_0 (1 << 6)
#define GALAXY_CONFIG_SBDMA_1 (2 << 6)
#define GALAXY_CONFIG_SBDMA_3 (3 << 6)
#define GALAXY_CONFIG_WSSA_530 (0 << 8)
#define GALAXY_CONFIG_WSSA_604 (1 << 8)
#define GALAXY_CONFIG_WSSA_E80 (2 << 8)
#define GALAXY_CONFIG_WSSA_F40 (3 << 8)
#define GALAXY_CONFIG_WSS_ENABLE (1 << 10)
#define GALAXY_CONFIG_GAME_ENABLE (1 << 11)
#define GALAXY_CONFIG_MPUA_300 (0 << 12)
#define GALAXY_CONFIG_MPUA_330 (1 << 12)
#define GALAXY_CONFIG_MPU_ENABLE (1 << 13)
#define GALAXY_CONFIG_CDA_310 (0 << 14)
#define GALAXY_CONFIG_CDA_320 (1 << 14)
#define GALAXY_CONFIG_CDA_340 (2 << 14)
#define GALAXY_CONFIG_CDA_350 (3 << 14)
#define GALAXY_CONFIG_CDA_MASK GALAXY_CONFIG_CDA_350
#define GALAXY_CONFIG_CD_DISABLE (0 << 16)
#define GALAXY_CONFIG_CD_PANASONIC (1 << 16)
#define GALAXY_CONFIG_CD_SONY (2 << 16)
#define GALAXY_CONFIG_CD_MITSUMI (3 << 16)
#define GALAXY_CONFIG_CD_AZTECH (4 << 16)
#define GALAXY_CONFIG_CD_UNUSED_5 (5 << 16)
#define GALAXY_CONFIG_CD_UNUSED_6 (6 << 16)
#define GALAXY_CONFIG_CD_UNUSED_7 (7 << 16)
#define GALAXY_CONFIG_CD_MASK GALAXY_CONFIG_CD_UNUSED_7
#define GALAXY_CONFIG_CDDMA8_DISABLE (0 << 20)
#define GALAXY_CONFIG_CDDMA8_0 (1 << 20)
#define GALAXY_CONFIG_CDDMA8_1 (2 << 20)
#define GALAXY_CONFIG_CDDMA8_3 (3 << 20)
#define GALAXY_CONFIG_CDDMA8_MASK GALAXY_CONFIG_CDDMA8_3
#define GALAXY_CONFIG_CDDMA16_DISABLE (0 << 22)
#define GALAXY_CONFIG_CDDMA16_5 (1 << 22)
#define GALAXY_CONFIG_CDDMA16_6 (2 << 22)
#define GALAXY_CONFIG_CDDMA16_7 (3 << 22)
#define GALAXY_CONFIG_CDDMA16_MASK GALAXY_CONFIG_CDDMA16_7
#define GALAXY_CONFIG_MPUIRQ_2 (1 << 24)
#define GALAXY_CONFIG_MPUIRQ_5 (1 << 25)
#define GALAXY_CONFIG_MPUIRQ_7 (1 << 26)
#define GALAXY_CONFIG_MPUIRQ_10 (1 << 27)
#define GALAXY_CONFIG_CDIRQ_5 (1 << 28)
#define GALAXY_CONFIG_CDIRQ_11 (1 << 29)
#define GALAXY_CONFIG_CDIRQ_12 (1 << 30)
#define GALAXY_CONFIG_CDIRQ_15 (1 << 31)
#define GALAXY_CONFIG_CDIRQ_MASK (\
GALAXY_CONFIG_CDIRQ_5 | GALAXY_CONFIG_CDIRQ_11 |\
GALAXY_CONFIG_CDIRQ_12 | GALAXY_CONFIG_CDIRQ_15)
#define GALAXY_CONFIG_MASK (\
GALAXY_CONFIG_SBA_MASK | GALAXY_CONFIG_CDA_MASK |\
GALAXY_CONFIG_CD_MASK | GALAXY_CONFIG_CDDMA16_MASK |\
GALAXY_CONFIG_CDDMA8_MASK | GALAXY_CONFIG_CDIRQ_MASK)
#include "galaxy.c"