d44115f28e
Fix gpio number assignment, so that it can match the number stated in the comment. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
78 lines
2.7 KiB
Text
78 lines
2.7 KiB
Text
* Freescale MC13783/MC13892 Power Management Integrated Circuit (PMIC)
|
|
|
|
Required properties:
|
|
- compatible : Should be "fsl,mc13783" or "fsl,mc13892"
|
|
|
|
Optional properties:
|
|
- fsl,mc13xxx-uses-adc : Indicate the ADC is being used
|
|
- fsl,mc13xxx-uses-codec : Indicate the Audio Codec is being used
|
|
- fsl,mc13xxx-uses-rtc : Indicate the RTC is being used
|
|
- fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
|
|
|
|
Sub-nodes:
|
|
- regulators : Contain the regulator nodes. The MC13892 regulators are
|
|
bound using their names as listed below with their registers and bits
|
|
for enabling.
|
|
|
|
vcoincell : regulator VCOINCELL (register 13, bit 23)
|
|
sw1 : regulator SW1 (register 24, bit 0)
|
|
sw2 : regulator SW2 (register 25, bit 0)
|
|
sw3 : regulator SW3 (register 26, bit 0)
|
|
sw4 : regulator SW4 (register 27, bit 0)
|
|
swbst : regulator SWBST (register 29, bit 20)
|
|
vgen1 : regulator VGEN1 (register 32, bit 0)
|
|
viohi : regulator VIOHI (register 32, bit 3)
|
|
vdig : regulator VDIG (register 32, bit 9)
|
|
vgen2 : regulator VGEN2 (register 32, bit 12)
|
|
vpll : regulator VPLL (register 32, bit 15)
|
|
vusb2 : regulator VUSB2 (register 32, bit 18)
|
|
vgen3 : regulator VGEN3 (register 33, bit 0)
|
|
vcam : regulator VCAM (register 33, bit 6)
|
|
vvideo : regulator VVIDEO (register 33, bit 12)
|
|
vaudio : regulator VAUDIO (register 33, bit 15)
|
|
vsd : regulator VSD (register 33, bit 18)
|
|
gpo1 : regulator GPO1 (register 34, bit 6)
|
|
gpo2 : regulator GPO2 (register 34, bit 8)
|
|
gpo3 : regulator GPO3 (register 34, bit 10)
|
|
gpo4 : regulator GPO4 (register 34, bit 12)
|
|
pwgt1spi : regulator PWGT1SPI (register 34, bit 15)
|
|
pwgt2spi : regulator PWGT2SPI (register 34, bit 16)
|
|
vusb : regulator VUSB (register 50, bit 3)
|
|
|
|
The bindings details of individual regulator device can be found in:
|
|
Documentation/devicetree/bindings/regulator/regulator.txt
|
|
|
|
Examples:
|
|
|
|
ecspi@70010000 { /* ECSPI1 */
|
|
fsl,spi-num-chipselects = <2>;
|
|
cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
|
|
<&gpio4 25 0>; /* GPIO4_25 */
|
|
status = "okay";
|
|
|
|
pmic: mc13892@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,mc13892";
|
|
spi-max-frequency = <6000000>;
|
|
reg = <0>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <8>;
|
|
|
|
regulators {
|
|
sw1_reg: mc13892__sw1 {
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <1375000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw2_reg: mc13892__sw2 {
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1850000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|