830145796a
The arch/arm/mach-exynos4 directory (CONFIG_ARCH_EXYNOS4) has made for plaforms based on EXYNOS4 SoCs. But since upcoming Samsung's SoCs such as EXYNOS5 (ARM Cortex A15) can reuse most codes in current mach-exynos4, one mach-exynos directory will be used for them. This patch changes to CONFIG_ARCH_EXYNOS (arch/arm/mach-exynos) but keeps original CONFIG_ARCH_EXYNOS4 in mach-exynos/Kconfig to avoid changing in driver side. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
91 lines
2.4 KiB
ArmAsm
91 lines
2.4 KiB
ArmAsm
/* arch/arm/mach-exynos4/include/mach/entry-macro.S
|
|
*
|
|
* Cloned from arch/arm/mach-realview/include/mach/entry-macro.S
|
|
*
|
|
* Low-level IRQ helper macros for EXYNOS4 platforms
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/map.h>
|
|
#include <asm/hardware/gic.h>
|
|
|
|
.macro disable_fiq
|
|
.endm
|
|
|
|
.macro get_irqnr_preamble, base, tmp
|
|
mov \tmp, #0
|
|
|
|
mrc p15, 0, \base, c0, c0, 5
|
|
and \base, \base, #3
|
|
cmp \base, #0
|
|
beq 1f
|
|
|
|
ldr \tmp, =gic_bank_offset
|
|
ldr \tmp, [\tmp]
|
|
cmp \base, #1
|
|
beq 1f
|
|
|
|
cmp \base, #2
|
|
addeq \tmp, \tmp, \tmp
|
|
addne \tmp, \tmp, \tmp, LSL #1
|
|
|
|
1: ldr \base, =gic_cpu_base_addr
|
|
ldr \base, [\base]
|
|
add \base, \base, \tmp
|
|
.endm
|
|
|
|
.macro arch_ret_to_user, tmp1, tmp2
|
|
.endm
|
|
|
|
/*
|
|
* The interrupt numbering scheme is defined in the
|
|
* interrupt controller spec. To wit:
|
|
*
|
|
* Interrupts 0-15 are IPI
|
|
* 16-28 are reserved
|
|
* 29-31 are local. We allow 30 to be used for the watchdog.
|
|
* 32-1020 are global
|
|
* 1021-1022 are reserved
|
|
* 1023 is "spurious" (no interrupt)
|
|
*
|
|
* For now, we ignore all local interrupts so only return an interrupt if it's
|
|
* between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
|
|
*
|
|
* A simple read from the controller will tell us the number of the highest
|
|
* priority enabled interrupt. We then just need to check whether it is in the
|
|
* valid range for an IRQ (30-1020 inclusive).
|
|
*/
|
|
|
|
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
|
|
|
|
ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
|
|
|
|
ldr \tmp, =1021
|
|
|
|
bic \irqnr, \irqstat, #0x1c00
|
|
|
|
cmp \irqnr, #15
|
|
cmpcc \irqnr, \irqnr
|
|
cmpne \irqnr, \tmp
|
|
cmpcs \irqnr, \irqnr
|
|
addne \irqnr, \irqnr, #32
|
|
|
|
.endm
|
|
|
|
/* We assume that irqstat (the raw value of the IRQ acknowledge
|
|
* register) is preserved from the macro above.
|
|
* If there is an IPI, we immediately signal end of interrupt on the
|
|
* controller, since this requires the original irqstat value which
|
|
* we won't easily be able to recreate later.
|
|
*/
|
|
|
|
.macro test_for_ipi, irqnr, irqstat, base, tmp
|
|
bic \irqnr, \irqstat, #0x1c00
|
|
cmp \irqnr, #16
|
|
strcc \irqstat, [\base, #GIC_CPU_EOI]
|
|
cmpcs \irqnr, \irqnr
|
|
.endm
|