81d68a96a3
This patch adds latency tracing for critical timings
(how long interrupts are disabled for).
"irqsoff" is added to /debugfs/tracing/available_tracers
Note:
tracing_max_latency
also holds the max latency for irqsoff (in usecs).
(default to large number so one must start latency tracing)
tracing_thresh
threshold (in usecs) to always print out if irqs off
is detected to be longer than stated here.
If irq_thresh is non-zero, then max_irq_latency
is ignored.
Here's an example of a trace with ftrace_enabled = 0
=======
preemption latency trace v1.1.5 on 2.6.24-rc7
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--------------------------------------------------------------------
latency: 100 us, #3/3, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2)
-----------------
| task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
=> started at: _spin_lock_irqsave+0x2a/0xb7
=> ended at: _spin_unlock_irqrestore+0x32/0x5f
_------=> CPU#
/ _-----=> irqs-off
| / _----=> need-resched
|| / _---=> hardirq/softirq
||| / _--=> preempt-depth
|||| /
||||| delay
cmd pid ||||| time | caller
\ / ||||| \ | /
swapper-0 1d.s3 0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000])
swapper-0 1d.s3 100us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000])
swapper-0 1d.s3 100us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f)
vim:ft=help
=======
And this is a trace with ftrace_enabled == 1
=======
preemption latency trace v1.1.5 on 2.6.24-rc7
--------------------------------------------------------------------
latency: 102 us, #12/12, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2)
-----------------
| task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
=> started at: _spin_lock_irqsave+0x2a/0xb7
=> ended at: _spin_unlock_irqrestore+0x32/0x5f
_------=> CPU#
/ _-----=> irqs-off
| / _----=> need-resched
|| / _---=> hardirq/softirq
||| / _--=> preempt-depth
|||| /
||||| delay
cmd pid ||||| time | caller
\ / ||||| \ | /
swapper-0 1dNs3 0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000])
swapper-0 1dNs3 46us : e1000_read_phy_reg+0x16/0x225 [e1000] (e1000_update_stats+0x5e2/0x64c [e1000])
swapper-0 1dNs3 46us : e1000_swfw_sync_acquire+0x10/0x99 [e1000] (e1000_read_phy_reg+0x49/0x225 [e1000])
swapper-0 1dNs3 46us : e1000_get_hw_eeprom_semaphore+0x12/0xa6 [e1000] (e1000_swfw_sync_acquire+0x36/0x99 [e1000])
swapper-0 1dNs3 47us : __const_udelay+0x9/0x47 (e1000_read_phy_reg+0x116/0x225 [e1000])
swapper-0 1dNs3 47us+: __delay+0x9/0x50 (__const_udelay+0x45/0x47)
swapper-0 1dNs3 97us : preempt_schedule+0xc/0x84 (__delay+0x4e/0x50)
swapper-0 1dNs3 98us : e1000_swfw_sync_release+0xc/0x55 [e1000] (e1000_read_phy_reg+0x211/0x225 [e1000])
swapper-0 1dNs3 99us+: e1000_put_hw_eeprom_semaphore+0x9/0x35 [e1000] (e1000_swfw_sync_release+0x50/0x55 [e1000])
swapper-0 1dNs3 101us : _spin_unlock_irqrestore+0xe/0x5f (e1000_update_stats+0x641/0x64c [e1000])
swapper-0 1dNs3 102us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000])
swapper-0 1dNs3 102us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f)
vim:ft=help
=======
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
61 lines
2 KiB
C
61 lines
2 KiB
C
#ifndef _LINUX_FTRACE_H
|
|
#define _LINUX_FTRACE_H
|
|
|
|
#ifdef CONFIG_FTRACE
|
|
|
|
#include <linux/linkage.h>
|
|
|
|
typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip);
|
|
|
|
struct ftrace_ops {
|
|
ftrace_func_t func;
|
|
struct ftrace_ops *next;
|
|
};
|
|
|
|
/*
|
|
* The ftrace_ops must be a static and should also
|
|
* be read_mostly. These functions do modify read_mostly variables
|
|
* so use them sparely. Never free an ftrace_op or modify the
|
|
* next pointer after it has been registered. Even after unregistering
|
|
* it, the next pointer may still be used internally.
|
|
*/
|
|
int register_ftrace_function(struct ftrace_ops *ops);
|
|
int unregister_ftrace_function(struct ftrace_ops *ops);
|
|
void clear_ftrace_function(void);
|
|
|
|
extern void ftrace_stub(unsigned long a0, unsigned long a1);
|
|
extern void mcount(void);
|
|
|
|
#else /* !CONFIG_FTRACE */
|
|
# define register_ftrace_function(ops) do { } while (0)
|
|
# define unregister_ftrace_function(ops) do { } while (0)
|
|
# define clear_ftrace_function(ops) do { } while (0)
|
|
#endif /* CONFIG_FTRACE */
|
|
|
|
|
|
#ifdef CONFIG_FRAME_POINTER
|
|
/* TODO: need to fix this for ARM */
|
|
# define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
|
|
# define CALLER_ADDR1 ((unsigned long)__builtin_return_address(1))
|
|
# define CALLER_ADDR2 ((unsigned long)__builtin_return_address(2))
|
|
# define CALLER_ADDR3 ((unsigned long)__builtin_return_address(3))
|
|
# define CALLER_ADDR4 ((unsigned long)__builtin_return_address(4))
|
|
# define CALLER_ADDR5 ((unsigned long)__builtin_return_address(5))
|
|
#else
|
|
# define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
|
|
# define CALLER_ADDR1 0UL
|
|
# define CALLER_ADDR2 0UL
|
|
# define CALLER_ADDR3 0UL
|
|
# define CALLER_ADDR4 0UL
|
|
# define CALLER_ADDR5 0UL
|
|
#endif
|
|
|
|
#ifdef CONFIG_IRQSOFF_TRACER
|
|
extern void notrace time_hardirqs_on(unsigned long a0, unsigned long a1);
|
|
extern void notrace time_hardirqs_off(unsigned long a0, unsigned long a1);
|
|
#else
|
|
# define time_hardirqs_on(a0, a1) do { } while (0)
|
|
# define time_hardirqs_off(a0, a1) do { } while (0)
|
|
#endif
|
|
|
|
#endif /* _LINUX_FTRACE_H */
|