kernel-fxtec-pro1x/Documentation/i2c/busses/i2c-i810
Jean Delvare 142078f6f0 [PATCH] i2c: i2c-i810 documentation update
Update the documented list of devices supported by the i2c-i810
driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 14:02:13 -07:00

47 lines
1.4 KiB
Text

Kernel driver i2c-i810
Supported adapters:
* Intel 82810, 82810-DC100, 82810E, and 82815 (GMCH)
* Intel 82845G (GMCH)
Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Kyösti Mälkki <kmalkki@cc.hut.fi>,
Ralph Metzler <rjkm@thp.uni-koeln.de>,
Mark D. Studebaker <mdsxyz123@yahoo.com>
Main contact: Mark Studebaker <mdsxyz123@yahoo.com>
Description
-----------
WARNING: If you have an '810' or '815' motherboard, your standard I2C
temperature sensors are most likely on the 801's I2C bus. You want the
i2c-i801 driver for those, not this driver.
Now for the i2c-i810...
The GMCH chip contains two I2C interfaces.
The first interface is used for DDC (Data Display Channel) which is a
serial channel through the VGA monitor connector to a DDC-compliant
monitor. This interface is defined by the Video Electronics Standards
Association (VESA). The standards are available for purchase at
http://www.vesa.org .
The second interface is a general-purpose I2C bus. It may be connected to a
TV-out chip such as the BT869 or possibly to a digital flat-panel display.
Features
--------
Both busses use the i2c-algo-bit driver for 'bit banging'
and support for specific transactions is provided by i2c-algo-bit.
Issues
------
If you enable bus testing in i2c-algo-bit (insmod i2c-algo-bit bit_test=1),
the test may fail; if so, the i2c-i810 driver won't be inserted. However,
we think this has been fixed.