9230372aee
Commit f62349ee97
makes it possible to
have some other than first uart port as ttyS0, which breaks the workaround
serial_in_override() function which will try to address the first uart
port (for ttyS0) and not the one that was initialized.
Signed-off-by: Alexander Shishkin <virtuoso@slind.org>
CC: Mika Westerberg <ext-mika.1.westerberg@nokia.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
721 lines
17 KiB
C
721 lines
17 KiB
C
/*
|
|
* arch/arm/mach-omap2/serial.c
|
|
*
|
|
* OMAP2 serial support.
|
|
*
|
|
* Copyright (C) 2005-2008 Nokia Corporation
|
|
* Author: Paul Mundt <paul.mundt@nokia.com>
|
|
*
|
|
* Major rework for PM support by Kevin Hilman
|
|
*
|
|
* Based off of arch/arm/mach-omap/omap1/serial.c
|
|
*
|
|
* Copyright (C) 2009 Texas Instruments
|
|
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/serial_8250.h>
|
|
#include <linux/serial_reg.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <plat/common.h>
|
|
#include <plat/board.h>
|
|
#include <plat/clock.h>
|
|
#include <plat/control.h>
|
|
|
|
#include "prm.h"
|
|
#include "pm.h"
|
|
#include "prm-regbits-34xx.h"
|
|
|
|
#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52
|
|
#define UART_OMAP_WER 0x17 /* Wake-up enable register */
|
|
|
|
#define DEFAULT_TIMEOUT (5 * HZ)
|
|
|
|
struct omap_uart_state {
|
|
int num;
|
|
int can_sleep;
|
|
struct timer_list timer;
|
|
u32 timeout;
|
|
|
|
void __iomem *wk_st;
|
|
void __iomem *wk_en;
|
|
u32 wk_mask;
|
|
u32 padconf;
|
|
|
|
struct clk *ick;
|
|
struct clk *fck;
|
|
int clocked;
|
|
|
|
struct plat_serial8250_port *p;
|
|
struct list_head node;
|
|
struct platform_device pdev;
|
|
|
|
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
|
|
int context_valid;
|
|
|
|
/* Registers to be saved/restored for OFF-mode */
|
|
u16 dll;
|
|
u16 dlh;
|
|
u16 ier;
|
|
u16 sysc;
|
|
u16 scr;
|
|
u16 wer;
|
|
#endif
|
|
};
|
|
|
|
static LIST_HEAD(uart_list);
|
|
|
|
static struct plat_serial8250_port serial_platform_data0[] = {
|
|
{
|
|
.mapbase = OMAP_UART1_BASE,
|
|
.irq = 72,
|
|
.flags = UPF_BOOT_AUTOCONF,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 2,
|
|
.uartclk = OMAP24XX_BASE_BAUD * 16,
|
|
}, {
|
|
.flags = 0
|
|
}
|
|
};
|
|
|
|
static struct plat_serial8250_port serial_platform_data1[] = {
|
|
{
|
|
.mapbase = OMAP_UART2_BASE,
|
|
.irq = 73,
|
|
.flags = UPF_BOOT_AUTOCONF,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 2,
|
|
.uartclk = OMAP24XX_BASE_BAUD * 16,
|
|
}, {
|
|
.flags = 0
|
|
}
|
|
};
|
|
|
|
static struct plat_serial8250_port serial_platform_data2[] = {
|
|
{
|
|
.mapbase = OMAP_UART3_BASE,
|
|
.irq = 74,
|
|
.flags = UPF_BOOT_AUTOCONF,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 2,
|
|
.uartclk = OMAP24XX_BASE_BAUD * 16,
|
|
}, {
|
|
.flags = 0
|
|
}
|
|
};
|
|
|
|
#ifdef CONFIG_ARCH_OMAP4
|
|
static struct plat_serial8250_port serial_platform_data3[] = {
|
|
{
|
|
.mapbase = OMAP_UART4_BASE,
|
|
.irq = 70,
|
|
.flags = UPF_BOOT_AUTOCONF,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 2,
|
|
.uartclk = OMAP24XX_BASE_BAUD * 16,
|
|
}, {
|
|
.flags = 0
|
|
}
|
|
};
|
|
#endif
|
|
static inline unsigned int __serial_read_reg(struct uart_port *up,
|
|
int offset)
|
|
{
|
|
offset <<= up->regshift;
|
|
return (unsigned int)__raw_readb(up->membase + offset);
|
|
}
|
|
|
|
static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
|
|
int offset)
|
|
{
|
|
offset <<= up->regshift;
|
|
return (unsigned int)__raw_readb(up->membase + offset);
|
|
}
|
|
|
|
static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
|
|
int value)
|
|
{
|
|
offset <<= p->regshift;
|
|
__raw_writeb(value, p->membase + offset);
|
|
}
|
|
|
|
/*
|
|
* Internal UARTs need to be initialized for the 8250 autoconfig to work
|
|
* properly. Note that the TX watermark initialization may not be needed
|
|
* once the 8250.c watermark handling code is merged.
|
|
*/
|
|
static inline void __init omap_uart_reset(struct omap_uart_state *uart)
|
|
{
|
|
struct plat_serial8250_port *p = uart->p;
|
|
|
|
serial_write_reg(p, UART_OMAP_MDR1, 0x07);
|
|
serial_write_reg(p, UART_OMAP_SCR, 0x08);
|
|
serial_write_reg(p, UART_OMAP_MDR1, 0x00);
|
|
serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
|
|
}
|
|
|
|
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
|
|
|
|
static void omap_uart_save_context(struct omap_uart_state *uart)
|
|
{
|
|
u16 lcr = 0;
|
|
struct plat_serial8250_port *p = uart->p;
|
|
|
|
if (!enable_off_mode)
|
|
return;
|
|
|
|
lcr = serial_read_reg(p, UART_LCR);
|
|
serial_write_reg(p, UART_LCR, 0xBF);
|
|
uart->dll = serial_read_reg(p, UART_DLL);
|
|
uart->dlh = serial_read_reg(p, UART_DLM);
|
|
serial_write_reg(p, UART_LCR, lcr);
|
|
uart->ier = serial_read_reg(p, UART_IER);
|
|
uart->sysc = serial_read_reg(p, UART_OMAP_SYSC);
|
|
uart->scr = serial_read_reg(p, UART_OMAP_SCR);
|
|
uart->wer = serial_read_reg(p, UART_OMAP_WER);
|
|
|
|
uart->context_valid = 1;
|
|
}
|
|
|
|
static void omap_uart_restore_context(struct omap_uart_state *uart)
|
|
{
|
|
u16 efr = 0;
|
|
struct plat_serial8250_port *p = uart->p;
|
|
|
|
if (!enable_off_mode)
|
|
return;
|
|
|
|
if (!uart->context_valid)
|
|
return;
|
|
|
|
uart->context_valid = 0;
|
|
|
|
serial_write_reg(p, UART_OMAP_MDR1, 0x7);
|
|
serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
|
|
efr = serial_read_reg(p, UART_EFR);
|
|
serial_write_reg(p, UART_EFR, UART_EFR_ECB);
|
|
serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
|
|
serial_write_reg(p, UART_IER, 0x0);
|
|
serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
|
|
serial_write_reg(p, UART_DLL, uart->dll);
|
|
serial_write_reg(p, UART_DLM, uart->dlh);
|
|
serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
|
|
serial_write_reg(p, UART_IER, uart->ier);
|
|
serial_write_reg(p, UART_FCR, 0xA1);
|
|
serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
|
|
serial_write_reg(p, UART_EFR, efr);
|
|
serial_write_reg(p, UART_LCR, UART_LCR_WLEN8);
|
|
serial_write_reg(p, UART_OMAP_SCR, uart->scr);
|
|
serial_write_reg(p, UART_OMAP_WER, uart->wer);
|
|
serial_write_reg(p, UART_OMAP_SYSC, uart->sysc);
|
|
serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */
|
|
}
|
|
#else
|
|
static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
|
|
static inline void omap_uart_restore_context(struct omap_uart_state *uart) {}
|
|
#endif /* CONFIG_PM && CONFIG_ARCH_OMAP3 */
|
|
|
|
static inline void omap_uart_enable_clocks(struct omap_uart_state *uart)
|
|
{
|
|
if (uart->clocked)
|
|
return;
|
|
|
|
clk_enable(uart->ick);
|
|
clk_enable(uart->fck);
|
|
uart->clocked = 1;
|
|
omap_uart_restore_context(uart);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
|
|
{
|
|
if (!uart->clocked)
|
|
return;
|
|
|
|
omap_uart_save_context(uart);
|
|
uart->clocked = 0;
|
|
clk_disable(uart->ick);
|
|
clk_disable(uart->fck);
|
|
}
|
|
|
|
static void omap_uart_enable_wakeup(struct omap_uart_state *uart)
|
|
{
|
|
/* Set wake-enable bit */
|
|
if (uart->wk_en && uart->wk_mask) {
|
|
u32 v = __raw_readl(uart->wk_en);
|
|
v |= uart->wk_mask;
|
|
__raw_writel(v, uart->wk_en);
|
|
}
|
|
|
|
/* Ensure IOPAD wake-enables are set */
|
|
if (cpu_is_omap34xx() && uart->padconf) {
|
|
u16 v = omap_ctrl_readw(uart->padconf);
|
|
v |= OMAP3_PADCONF_WAKEUPENABLE0;
|
|
omap_ctrl_writew(v, uart->padconf);
|
|
}
|
|
}
|
|
|
|
static void omap_uart_disable_wakeup(struct omap_uart_state *uart)
|
|
{
|
|
/* Clear wake-enable bit */
|
|
if (uart->wk_en && uart->wk_mask) {
|
|
u32 v = __raw_readl(uart->wk_en);
|
|
v &= ~uart->wk_mask;
|
|
__raw_writel(v, uart->wk_en);
|
|
}
|
|
|
|
/* Ensure IOPAD wake-enables are cleared */
|
|
if (cpu_is_omap34xx() && uart->padconf) {
|
|
u16 v = omap_ctrl_readw(uart->padconf);
|
|
v &= ~OMAP3_PADCONF_WAKEUPENABLE0;
|
|
omap_ctrl_writew(v, uart->padconf);
|
|
}
|
|
}
|
|
|
|
static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
|
|
int enable)
|
|
{
|
|
struct plat_serial8250_port *p = uart->p;
|
|
u16 sysc;
|
|
|
|
sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7;
|
|
if (enable)
|
|
sysc |= 0x2 << 3;
|
|
else
|
|
sysc |= 0x1 << 3;
|
|
|
|
serial_write_reg(p, UART_OMAP_SYSC, sysc);
|
|
}
|
|
|
|
static void omap_uart_block_sleep(struct omap_uart_state *uart)
|
|
{
|
|
omap_uart_enable_clocks(uart);
|
|
|
|
omap_uart_smart_idle_enable(uart, 0);
|
|
uart->can_sleep = 0;
|
|
if (uart->timeout)
|
|
mod_timer(&uart->timer, jiffies + uart->timeout);
|
|
else
|
|
del_timer(&uart->timer);
|
|
}
|
|
|
|
static void omap_uart_allow_sleep(struct omap_uart_state *uart)
|
|
{
|
|
if (device_may_wakeup(&uart->pdev.dev))
|
|
omap_uart_enable_wakeup(uart);
|
|
else
|
|
omap_uart_disable_wakeup(uart);
|
|
|
|
if (!uart->clocked)
|
|
return;
|
|
|
|
omap_uart_smart_idle_enable(uart, 1);
|
|
uart->can_sleep = 1;
|
|
del_timer(&uart->timer);
|
|
}
|
|
|
|
static void omap_uart_idle_timer(unsigned long data)
|
|
{
|
|
struct omap_uart_state *uart = (struct omap_uart_state *)data;
|
|
|
|
omap_uart_allow_sleep(uart);
|
|
}
|
|
|
|
void omap_uart_prepare_idle(int num)
|
|
{
|
|
struct omap_uart_state *uart;
|
|
|
|
list_for_each_entry(uart, &uart_list, node) {
|
|
if (num == uart->num && uart->can_sleep) {
|
|
omap_uart_disable_clocks(uart);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
void omap_uart_resume_idle(int num)
|
|
{
|
|
struct omap_uart_state *uart;
|
|
|
|
list_for_each_entry(uart, &uart_list, node) {
|
|
if (num == uart->num) {
|
|
omap_uart_enable_clocks(uart);
|
|
|
|
/* Check for IO pad wakeup */
|
|
if (cpu_is_omap34xx() && uart->padconf) {
|
|
u16 p = omap_ctrl_readw(uart->padconf);
|
|
|
|
if (p & OMAP3_PADCONF_WAKEUPEVENT0)
|
|
omap_uart_block_sleep(uart);
|
|
}
|
|
|
|
/* Check for normal UART wakeup */
|
|
if (__raw_readl(uart->wk_st) & uart->wk_mask)
|
|
omap_uart_block_sleep(uart);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
void omap_uart_prepare_suspend(void)
|
|
{
|
|
struct omap_uart_state *uart;
|
|
|
|
list_for_each_entry(uart, &uart_list, node) {
|
|
omap_uart_allow_sleep(uart);
|
|
}
|
|
}
|
|
|
|
int omap_uart_can_sleep(void)
|
|
{
|
|
struct omap_uart_state *uart;
|
|
int can_sleep = 1;
|
|
|
|
list_for_each_entry(uart, &uart_list, node) {
|
|
if (!uart->clocked)
|
|
continue;
|
|
|
|
if (!uart->can_sleep) {
|
|
can_sleep = 0;
|
|
continue;
|
|
}
|
|
|
|
/* This UART can now safely sleep. */
|
|
omap_uart_allow_sleep(uart);
|
|
}
|
|
|
|
return can_sleep;
|
|
}
|
|
|
|
/**
|
|
* omap_uart_interrupt()
|
|
*
|
|
* This handler is used only to detect that *any* UART interrupt has
|
|
* occurred. It does _nothing_ to handle the interrupt. Rather,
|
|
* any UART interrupt will trigger the inactivity timer so the
|
|
* UART will not idle or sleep for its timeout period.
|
|
*
|
|
**/
|
|
static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct omap_uart_state *uart = dev_id;
|
|
|
|
omap_uart_block_sleep(uart);
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static void omap_uart_idle_init(struct omap_uart_state *uart)
|
|
{
|
|
struct plat_serial8250_port *p = uart->p;
|
|
int ret;
|
|
|
|
uart->can_sleep = 0;
|
|
uart->timeout = DEFAULT_TIMEOUT;
|
|
setup_timer(&uart->timer, omap_uart_idle_timer,
|
|
(unsigned long) uart);
|
|
mod_timer(&uart->timer, jiffies + uart->timeout);
|
|
omap_uart_smart_idle_enable(uart, 0);
|
|
|
|
if (cpu_is_omap34xx()) {
|
|
u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD;
|
|
u32 wk_mask = 0;
|
|
u32 padconf = 0;
|
|
|
|
uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1);
|
|
uart->wk_st = OMAP34XX_PRM_REGADDR(mod, PM_WKST1);
|
|
switch (uart->num) {
|
|
case 0:
|
|
wk_mask = OMAP3430_ST_UART1_MASK;
|
|
padconf = 0x182;
|
|
break;
|
|
case 1:
|
|
wk_mask = OMAP3430_ST_UART2_MASK;
|
|
padconf = 0x17a;
|
|
break;
|
|
case 2:
|
|
wk_mask = OMAP3430_ST_UART3_MASK;
|
|
padconf = 0x19e;
|
|
break;
|
|
}
|
|
uart->wk_mask = wk_mask;
|
|
uart->padconf = padconf;
|
|
} else if (cpu_is_omap24xx()) {
|
|
u32 wk_mask = 0;
|
|
|
|
if (cpu_is_omap2430()) {
|
|
uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKEN1);
|
|
uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKST1);
|
|
} else if (cpu_is_omap2420()) {
|
|
uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKEN1);
|
|
uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKST1);
|
|
}
|
|
switch (uart->num) {
|
|
case 0:
|
|
wk_mask = OMAP24XX_ST_UART1_MASK;
|
|
break;
|
|
case 1:
|
|
wk_mask = OMAP24XX_ST_UART2_MASK;
|
|
break;
|
|
case 2:
|
|
wk_mask = OMAP24XX_ST_UART3_MASK;
|
|
break;
|
|
}
|
|
uart->wk_mask = wk_mask;
|
|
} else {
|
|
uart->wk_en = 0;
|
|
uart->wk_st = 0;
|
|
uart->wk_mask = 0;
|
|
uart->padconf = 0;
|
|
}
|
|
|
|
p->irqflags |= IRQF_SHARED;
|
|
ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
|
|
"serial idle", (void *)uart);
|
|
WARN_ON(ret);
|
|
}
|
|
|
|
void omap_uart_enable_irqs(int enable)
|
|
{
|
|
int ret;
|
|
struct omap_uart_state *uart;
|
|
|
|
list_for_each_entry(uart, &uart_list, node) {
|
|
if (enable)
|
|
ret = request_irq(uart->p->irq, omap_uart_interrupt,
|
|
IRQF_SHARED, "serial idle", (void *)uart);
|
|
else
|
|
free_irq(uart->p->irq, (void *)uart);
|
|
}
|
|
}
|
|
|
|
static ssize_t sleep_timeout_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct platform_device *pdev = container_of(dev,
|
|
struct platform_device, dev);
|
|
struct omap_uart_state *uart = container_of(pdev,
|
|
struct omap_uart_state, pdev);
|
|
|
|
return sprintf(buf, "%u\n", uart->timeout / HZ);
|
|
}
|
|
|
|
static ssize_t sleep_timeout_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t n)
|
|
{
|
|
struct platform_device *pdev = container_of(dev,
|
|
struct platform_device, dev);
|
|
struct omap_uart_state *uart = container_of(pdev,
|
|
struct omap_uart_state, pdev);
|
|
unsigned int value;
|
|
|
|
if (sscanf(buf, "%u", &value) != 1) {
|
|
printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
uart->timeout = value * HZ;
|
|
if (uart->timeout)
|
|
mod_timer(&uart->timer, jiffies + uart->timeout);
|
|
else
|
|
/* A zero value means disable timeout feature */
|
|
omap_uart_block_sleep(uart);
|
|
|
|
return n;
|
|
}
|
|
|
|
DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
|
|
#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr))
|
|
#else
|
|
static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
|
|
#define DEV_CREATE_FILE(dev, attr)
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct omap_uart_state omap_uart[] = {
|
|
{
|
|
.pdev = {
|
|
.name = "serial8250",
|
|
.id = PLAT8250_DEV_PLATFORM,
|
|
.dev = {
|
|
.platform_data = serial_platform_data0,
|
|
},
|
|
},
|
|
}, {
|
|
.pdev = {
|
|
.name = "serial8250",
|
|
.id = PLAT8250_DEV_PLATFORM1,
|
|
.dev = {
|
|
.platform_data = serial_platform_data1,
|
|
},
|
|
},
|
|
}, {
|
|
.pdev = {
|
|
.name = "serial8250",
|
|
.id = PLAT8250_DEV_PLATFORM2,
|
|
.dev = {
|
|
.platform_data = serial_platform_data2,
|
|
},
|
|
},
|
|
},
|
|
#ifdef CONFIG_ARCH_OMAP4
|
|
{
|
|
.pdev = {
|
|
.name = "serial8250",
|
|
.id = 3,
|
|
.dev = {
|
|
.platform_data = serial_platform_data3,
|
|
},
|
|
},
|
|
},
|
|
#endif
|
|
};
|
|
|
|
/*
|
|
* Override the default 8250 read handler: mem_serial_in()
|
|
* Empty RX fifo read causes an abort on omap3630 and omap4
|
|
* This function makes sure that an empty rx fifo is not read on these silicons
|
|
* (OMAP1/2/3430 are not affected)
|
|
*/
|
|
static unsigned int serial_in_override(struct uart_port *up, int offset)
|
|
{
|
|
if (UART_RX == offset) {
|
|
unsigned int lsr;
|
|
lsr = __serial_read_reg(up, UART_LSR);
|
|
if (!(lsr & UART_LSR_DR))
|
|
return -EPERM;
|
|
}
|
|
|
|
return __serial_read_reg(up, offset);
|
|
}
|
|
|
|
void __init omap_serial_early_init(void)
|
|
{
|
|
int i;
|
|
char name[16];
|
|
|
|
/*
|
|
* Make sure the serial ports are muxed on at this point.
|
|
* You have to mux them off in device drivers later on
|
|
* if not needed.
|
|
*/
|
|
|
|
for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
|
|
struct omap_uart_state *uart = &omap_uart[i];
|
|
struct platform_device *pdev = &uart->pdev;
|
|
struct device *dev = &pdev->dev;
|
|
struct plat_serial8250_port *p = dev->platform_data;
|
|
|
|
/*
|
|
* Module 4KB + L4 interconnect 4KB
|
|
* Static mapping, never released
|
|
*/
|
|
p->membase = ioremap(p->mapbase, SZ_8K);
|
|
if (!p->membase) {
|
|
printk(KERN_ERR "ioremap failed for uart%i\n", i + 1);
|
|
continue;
|
|
}
|
|
|
|
sprintf(name, "uart%d_ick", i+1);
|
|
uart->ick = clk_get(NULL, name);
|
|
if (IS_ERR(uart->ick)) {
|
|
printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
|
|
uart->ick = NULL;
|
|
}
|
|
|
|
sprintf(name, "uart%d_fck", i+1);
|
|
uart->fck = clk_get(NULL, name);
|
|
if (IS_ERR(uart->fck)) {
|
|
printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
|
|
uart->fck = NULL;
|
|
}
|
|
|
|
/* FIXME: Remove this once the clkdev is ready */
|
|
if (!cpu_is_omap44xx()) {
|
|
if (!uart->ick || !uart->fck)
|
|
continue;
|
|
}
|
|
|
|
uart->num = i;
|
|
p->private_data = uart;
|
|
uart->p = p;
|
|
|
|
if (cpu_is_omap44xx())
|
|
p->irq += 32;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* omap_serial_init_port() - initialize single serial port
|
|
* @port: serial port number (0-3)
|
|
*
|
|
* This function initialies serial driver for given @port only.
|
|
* Platforms can call this function instead of omap_serial_init()
|
|
* if they don't plan to use all available UARTs as serial ports.
|
|
*
|
|
* Don't mix calls to omap_serial_init_port() and omap_serial_init(),
|
|
* use only one of the two.
|
|
*/
|
|
void __init omap_serial_init_port(int port)
|
|
{
|
|
struct omap_uart_state *uart;
|
|
struct platform_device *pdev;
|
|
struct device *dev;
|
|
|
|
BUG_ON(port < 0);
|
|
BUG_ON(port >= ARRAY_SIZE(omap_uart));
|
|
|
|
uart = &omap_uart[port];
|
|
pdev = &uart->pdev;
|
|
dev = &pdev->dev;
|
|
|
|
omap_uart_enable_clocks(uart);
|
|
|
|
omap_uart_reset(uart);
|
|
omap_uart_idle_init(uart);
|
|
|
|
list_add_tail(&uart->node, &uart_list);
|
|
|
|
if (WARN_ON(platform_device_register(pdev)))
|
|
return;
|
|
|
|
if ((cpu_is_omap34xx() && uart->padconf) ||
|
|
(uart->wk_en && uart->wk_mask)) {
|
|
device_init_wakeup(dev, true);
|
|
DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
|
|
}
|
|
|
|
/* omap44xx: Never read empty UART fifo
|
|
* omap3xxx: Never read empty UART fifo on UARTs
|
|
* with IP rev >=0x52
|
|
*/
|
|
if (cpu_is_omap44xx())
|
|
uart->p->serial_in = serial_in_override;
|
|
else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
|
|
>= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
|
|
uart->p->serial_in = serial_in_override;
|
|
}
|
|
|
|
/**
|
|
* omap_serial_init() - intialize all supported serial ports
|
|
*
|
|
* Initializes all available UARTs as serial ports. Platforms
|
|
* can call this function when they want to have default behaviour
|
|
* for serial ports (e.g initialize them all as serial ports).
|
|
*/
|
|
void __init omap_serial_init(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(omap_uart); i++)
|
|
omap_serial_init_port(i);
|
|
}
|