75f5db39ff
Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJWOehzAAoJECTWi3JdVIfQTPYH+wYMDG8gAIw2s0AJ4DvVe4qZ sOAm1UgUJZxssrEA6BNqbfM0dfRo+oQJKmRd0Dc5n7LEMsYHdI/5yKHk8PCS6ZzD iQyQCzbd0thDAqwuPaMP62cyPDHwyJX22VGTsgVnj6AZqAQ+9+g4SPKhFnm1Mlm4 hmDi6fdSrsqo8k8gkpVN8RFOfVsjAV1dLtAauQRWDHrqMxXURSrKG76eqAqUa5bn BLPXBoj5PA0DMLPO2j+ADZwWN723LrI2mSSlc+ThjEX/OIt2OhAoiOTV5RPqaafy TIsCkh68q/gYAsL5HtvvmgZByl41FLYiO0Z+rXmWUyMMbnvhZTLws9S2BNpBLuk= =DgXG -----END PGP SIGNATURE----- Merge tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...
309 lines
7 KiB
C
309 lines
7 KiB
C
/*
|
|
* AD7303 Digital to analog converters driver
|
|
*
|
|
* Copyright 2013 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2.
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#include <linux/platform_data/ad7303.h>
|
|
|
|
#define AD7303_CFG_EXTERNAL_VREF BIT(15)
|
|
#define AD7303_CFG_POWER_DOWN(ch) BIT(11 + (ch))
|
|
#define AD7303_CFG_ADDR_OFFSET 10
|
|
|
|
#define AD7303_CMD_UPDATE_DAC (0x3 << 8)
|
|
|
|
/**
|
|
* struct ad7303_state - driver instance specific data
|
|
* @spi: the device for this driver instance
|
|
* @config: cached config register value
|
|
* @dac_cache: current DAC raw value (chip does not support readback)
|
|
* @data: spi transfer buffer
|
|
*/
|
|
|
|
struct ad7303_state {
|
|
struct spi_device *spi;
|
|
uint16_t config;
|
|
uint8_t dac_cache[2];
|
|
|
|
struct regulator *vdd_reg;
|
|
struct regulator *vref_reg;
|
|
|
|
/*
|
|
* DMA (thus cache coherency maintenance) requires the
|
|
* transfer buffers to live in their own cache lines.
|
|
*/
|
|
__be16 data ____cacheline_aligned;
|
|
};
|
|
|
|
static int ad7303_write(struct ad7303_state *st, unsigned int chan,
|
|
uint8_t val)
|
|
{
|
|
st->data = cpu_to_be16(AD7303_CMD_UPDATE_DAC |
|
|
(chan << AD7303_CFG_ADDR_OFFSET) |
|
|
st->config | val);
|
|
|
|
return spi_write(st->spi, &st->data, sizeof(st->data));
|
|
}
|
|
|
|
static ssize_t ad7303_read_dac_powerdown(struct iio_dev *indio_dev,
|
|
uintptr_t private, const struct iio_chan_spec *chan, char *buf)
|
|
{
|
|
struct ad7303_state *st = iio_priv(indio_dev);
|
|
|
|
return sprintf(buf, "%d\n", (bool)(st->config &
|
|
AD7303_CFG_POWER_DOWN(chan->channel)));
|
|
}
|
|
|
|
static ssize_t ad7303_write_dac_powerdown(struct iio_dev *indio_dev,
|
|
uintptr_t private, const struct iio_chan_spec *chan, const char *buf,
|
|
size_t len)
|
|
{
|
|
struct ad7303_state *st = iio_priv(indio_dev);
|
|
bool pwr_down;
|
|
int ret;
|
|
|
|
ret = strtobool(buf, &pwr_down);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_lock(&indio_dev->mlock);
|
|
|
|
if (pwr_down)
|
|
st->config |= AD7303_CFG_POWER_DOWN(chan->channel);
|
|
else
|
|
st->config &= ~AD7303_CFG_POWER_DOWN(chan->channel);
|
|
|
|
/* There is no noop cmd which allows us to only update the powerdown
|
|
* mode, so just write one of the DAC channels again */
|
|
ad7303_write(st, chan->channel, st->dac_cache[chan->channel]);
|
|
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return len;
|
|
}
|
|
|
|
static int ad7303_get_vref(struct ad7303_state *st,
|
|
struct iio_chan_spec const *chan)
|
|
{
|
|
int ret;
|
|
|
|
if (st->config & AD7303_CFG_EXTERNAL_VREF)
|
|
return regulator_get_voltage(st->vref_reg);
|
|
|
|
ret = regulator_get_voltage(st->vdd_reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
return ret / 2;
|
|
}
|
|
|
|
static int ad7303_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int *val, int *val2, long info)
|
|
{
|
|
struct ad7303_state *st = iio_priv(indio_dev);
|
|
int vref_uv;
|
|
|
|
switch (info) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
*val = st->dac_cache[chan->channel];
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
vref_uv = ad7303_get_vref(st, chan);
|
|
if (vref_uv < 0)
|
|
return vref_uv;
|
|
|
|
*val = 2 * vref_uv / 1000;
|
|
*val2 = chan->scan_type.realbits;
|
|
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
default:
|
|
break;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int ad7303_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int val, int val2, long mask)
|
|
{
|
|
struct ad7303_state *st = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
if (val >= (1 << chan->scan_type.realbits) || val < 0)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&indio_dev->mlock);
|
|
ret = ad7303_write(st, chan->address, val);
|
|
if (ret == 0)
|
|
st->dac_cache[chan->channel] = val;
|
|
mutex_unlock(&indio_dev->mlock);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct iio_info ad7303_info = {
|
|
.read_raw = ad7303_read_raw,
|
|
.write_raw = ad7303_write_raw,
|
|
.driver_module = THIS_MODULE,
|
|
};
|
|
|
|
static const struct iio_chan_spec_ext_info ad7303_ext_info[] = {
|
|
{
|
|
.name = "powerdown",
|
|
.read = ad7303_read_dac_powerdown,
|
|
.write = ad7303_write_dac_powerdown,
|
|
.shared = IIO_SEPARATE,
|
|
},
|
|
{ },
|
|
};
|
|
|
|
#define AD7303_CHANNEL(chan) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.output = 1, \
|
|
.channel = (chan), \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
.address = (chan), \
|
|
.scan_type = { \
|
|
.sign = 'u', \
|
|
.realbits = '8', \
|
|
.storagebits = '8', \
|
|
.shift = '0', \
|
|
}, \
|
|
.ext_info = ad7303_ext_info, \
|
|
}
|
|
|
|
static const struct iio_chan_spec ad7303_channels[] = {
|
|
AD7303_CHANNEL(0),
|
|
AD7303_CHANNEL(1),
|
|
};
|
|
|
|
static int ad7303_probe(struct spi_device *spi)
|
|
{
|
|
const struct spi_device_id *id = spi_get_device_id(spi);
|
|
struct iio_dev *indio_dev;
|
|
struct ad7303_state *st;
|
|
bool ext_ref;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
|
|
if (indio_dev == NULL)
|
|
return -ENOMEM;
|
|
|
|
st = iio_priv(indio_dev);
|
|
spi_set_drvdata(spi, indio_dev);
|
|
|
|
st->spi = spi;
|
|
|
|
st->vdd_reg = devm_regulator_get(&spi->dev, "Vdd");
|
|
if (IS_ERR(st->vdd_reg))
|
|
return PTR_ERR(st->vdd_reg);
|
|
|
|
ret = regulator_enable(st->vdd_reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (spi->dev.of_node) {
|
|
ext_ref = of_property_read_bool(spi->dev.of_node,
|
|
"REF-supply");
|
|
} else {
|
|
struct ad7303_platform_data *pdata = spi->dev.platform_data;
|
|
if (pdata && pdata->use_external_ref)
|
|
ext_ref = true;
|
|
else
|
|
ext_ref = false;
|
|
}
|
|
|
|
if (ext_ref) {
|
|
st->vref_reg = devm_regulator_get(&spi->dev, "REF");
|
|
if (IS_ERR(st->vref_reg)) {
|
|
ret = PTR_ERR(st->vref_reg);
|
|
goto err_disable_vdd_reg;
|
|
}
|
|
|
|
ret = regulator_enable(st->vref_reg);
|
|
if (ret)
|
|
goto err_disable_vdd_reg;
|
|
|
|
st->config |= AD7303_CFG_EXTERNAL_VREF;
|
|
}
|
|
|
|
indio_dev->dev.parent = &spi->dev;
|
|
indio_dev->name = id->name;
|
|
indio_dev->info = &ad7303_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = ad7303_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(ad7303_channels);
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret)
|
|
goto err_disable_vref_reg;
|
|
|
|
return 0;
|
|
|
|
err_disable_vref_reg:
|
|
if (st->vref_reg)
|
|
regulator_disable(st->vref_reg);
|
|
err_disable_vdd_reg:
|
|
regulator_disable(st->vdd_reg);
|
|
return ret;
|
|
}
|
|
|
|
static int ad7303_remove(struct spi_device *spi)
|
|
{
|
|
struct iio_dev *indio_dev = spi_get_drvdata(spi);
|
|
struct ad7303_state *st = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
|
|
if (st->vref_reg)
|
|
regulator_disable(st->vref_reg);
|
|
regulator_disable(st->vdd_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id ad7303_spi_of_match[] = {
|
|
{ .compatible = "adi,ad7303", },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ad7303_spi_of_match);
|
|
|
|
static const struct spi_device_id ad7303_spi_ids[] = {
|
|
{ "ad7303", 0 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, ad7303_spi_ids);
|
|
|
|
static struct spi_driver ad7303_driver = {
|
|
.driver = {
|
|
.name = "ad7303",
|
|
.of_match_table = of_match_ptr(ad7303_spi_of_match),
|
|
},
|
|
.probe = ad7303_probe,
|
|
.remove = ad7303_remove,
|
|
.id_table = ad7303_spi_ids,
|
|
};
|
|
module_spi_driver(ad7303_driver);
|
|
|
|
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
|
|
MODULE_DESCRIPTION("Analog Devices AD7303 DAC driver");
|
|
MODULE_LICENSE("GPL v2");
|