f90bb153b1
This patch reworks the way IRQs are fixed up on PCI for arch powerpc. It makes pci_read_irq_line() called by default in the PCI code for devices that are probed, and add an optional per-device fixup in ppc_md for platforms that really need to correct what they obtain from pci_read_irq_line(). It also removes ppc_md.irq_bus_setup which was only used by pSeries and should not be needed anymore. I've also removed the pSeries s7a workaround as it can't work with the current interrupt code anyway. I'm trying to get one of these machines working so I can test a proper fix for that problem. I also haven't updated the old-style fixup code from 85xx_cds.c because it's actually buggy :) It assigns pci_dev->irq hard coded numbers which is no good with the new IRQ mapping code. It should at least use irq_create_mapping(NULL, hard_coded_number); and possibly also set_irq_type() to set them as level low. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
106 lines
2.8 KiB
C
106 lines
2.8 KiB
C
/*
|
|
* FSL SoC setup code
|
|
*
|
|
* Maintained by Kumar Gala (see MAINTAINERS for contact information)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/stddef.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/atomic.h>
|
|
#include <asm/io.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/prom.h>
|
|
#include <sysdev/fsl_soc.h>
|
|
|
|
#undef DEBUG
|
|
|
|
#ifdef DEBUG
|
|
#define DBG(x...) printk(x)
|
|
#else
|
|
#define DBG(x...)
|
|
#endif
|
|
|
|
int mpc83xx_pci2_busno;
|
|
|
|
int mpc83xx_exclude_device(u_char bus, u_char devfn)
|
|
{
|
|
if (bus == 0 && PCI_SLOT(devfn) == 0)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
if (mpc83xx_pci2_busno)
|
|
if (bus == (mpc83xx_pci2_busno) && PCI_SLOT(devfn) == 0)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
int __init add_bridge(struct device_node *dev)
|
|
{
|
|
int len;
|
|
struct pci_controller *hose;
|
|
struct resource rsrc;
|
|
const int *bus_range;
|
|
int primary = 1, has_address = 0;
|
|
phys_addr_t immr = get_immrbase();
|
|
|
|
DBG("Adding PCI host bridge %s\n", dev->full_name);
|
|
|
|
/* Fetch host bridge registers address */
|
|
has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
|
|
|
|
/* Get bus range if any */
|
|
bus_range = get_property(dev, "bus-range", &len);
|
|
if (bus_range == NULL || len < 2 * sizeof(int)) {
|
|
printk(KERN_WARNING "Can't get bus-range for %s, assume"
|
|
" bus 0\n", dev->full_name);
|
|
}
|
|
|
|
hose = pcibios_alloc_controller();
|
|
if (!hose)
|
|
return -ENOMEM;
|
|
hose->arch_data = dev;
|
|
hose->set_cfg_type = 1;
|
|
|
|
hose->first_busno = bus_range ? bus_range[0] : 0;
|
|
hose->last_busno = bus_range ? bus_range[1] : 0xff;
|
|
|
|
/* MPC83xx supports up to two host controllers one at 0x8500 from immrbar
|
|
* the other at 0x8600, we consider the 0x8500 the primary controller
|
|
*/
|
|
/* PCI 1 */
|
|
if ((rsrc.start & 0xfffff) == 0x8500) {
|
|
setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304);
|
|
}
|
|
/* PCI 2 */
|
|
if ((rsrc.start & 0xfffff) == 0x8600) {
|
|
setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384);
|
|
primary = 0;
|
|
hose->bus_offset = hose->first_busno;
|
|
mpc83xx_pci2_busno = hose->first_busno;
|
|
}
|
|
|
|
printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. "
|
|
"Firmware bus number: %d->%d\n",
|
|
(unsigned long long)rsrc.start, hose->first_busno,
|
|
hose->last_busno);
|
|
|
|
DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
|
|
hose, hose->cfg_addr, hose->cfg_data);
|
|
|
|
/* Interpret the "ranges" property */
|
|
/* This also maps the I/O region and sets isa_io/mem_base */
|
|
pci_process_bridge_OF_ranges(hose, dev, primary);
|
|
|
|
return 0;
|
|
}
|