fa21a580de
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
296 lines
7.2 KiB
C
296 lines
7.2 KiB
C
/*
|
|
* mpc8xxx_wdt.c - MPC8xx/MPC83xx/MPC86xx watchdog userspace interface
|
|
*
|
|
* Authors: Dave Updegraff <dave@cray.org>
|
|
* Kumar Gala <galak@kernel.crashing.org>
|
|
* Attribution: from 83xx_wst: Florian Schirmer <jolt@tuxbox.org>
|
|
* ..and from sc520_wdt
|
|
* Copyright (c) 2008 MontaVista Software, Inc.
|
|
* Anton Vorontsov <avorontsov@ru.mvista.com>
|
|
*
|
|
* Note: it appears that you can only actually ENABLE or DISABLE the thing
|
|
* once after POR. Once enabled, you cannot disable, and vice versa.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/fs.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/module.h>
|
|
#include <linux/watchdog.h>
|
|
#include <linux/io.h>
|
|
#include <linux/uaccess.h>
|
|
#include <sysdev/fsl_soc.h>
|
|
|
|
struct mpc8xxx_wdt {
|
|
__be32 res0;
|
|
__be32 swcrr; /* System watchdog control register */
|
|
#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count. */
|
|
#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit. */
|
|
#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit.*/
|
|
#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit. */
|
|
__be32 swcnr; /* System watchdog count register */
|
|
u8 res1[2];
|
|
__be16 swsrr; /* System watchdog service register */
|
|
u8 res2[0xF0];
|
|
};
|
|
|
|
struct mpc8xxx_wdt_type {
|
|
int prescaler;
|
|
bool hw_enabled;
|
|
};
|
|
|
|
static struct mpc8xxx_wdt __iomem *wd_base;
|
|
static int mpc8xxx_wdt_init_late(void);
|
|
|
|
static u16 timeout = 0xffff;
|
|
module_param(timeout, ushort, 0);
|
|
MODULE_PARM_DESC(timeout,
|
|
"Watchdog timeout in ticks. (0<timeout<65536, default=65535)");
|
|
|
|
static bool reset = 1;
|
|
module_param(reset, bool, 0);
|
|
MODULE_PARM_DESC(reset,
|
|
"Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset");
|
|
|
|
static bool nowayout = WATCHDOG_NOWAYOUT;
|
|
module_param(nowayout, bool, 0);
|
|
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
|
|
"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
|
|
/*
|
|
* We always prescale, but if someone really doesn't want to they can set this
|
|
* to 0
|
|
*/
|
|
static int prescale = 1;
|
|
|
|
static DEFINE_SPINLOCK(wdt_spinlock);
|
|
|
|
static void mpc8xxx_wdt_keepalive(void)
|
|
{
|
|
/* Ping the WDT */
|
|
spin_lock(&wdt_spinlock);
|
|
out_be16(&wd_base->swsrr, 0x556c);
|
|
out_be16(&wd_base->swsrr, 0xaa39);
|
|
spin_unlock(&wdt_spinlock);
|
|
}
|
|
|
|
static struct watchdog_device mpc8xxx_wdt_dev;
|
|
static void mpc8xxx_wdt_timer_ping(unsigned long arg);
|
|
static DEFINE_TIMER(wdt_timer, mpc8xxx_wdt_timer_ping, 0,
|
|
(unsigned long)&mpc8xxx_wdt_dev);
|
|
|
|
static void mpc8xxx_wdt_timer_ping(unsigned long arg)
|
|
{
|
|
struct watchdog_device *w = (struct watchdog_device *)arg;
|
|
|
|
mpc8xxx_wdt_keepalive();
|
|
/* We're pinging it twice faster than needed, just to be sure. */
|
|
mod_timer(&wdt_timer, jiffies + HZ * w->timeout / 2);
|
|
}
|
|
|
|
static int mpc8xxx_wdt_start(struct watchdog_device *w)
|
|
{
|
|
u32 tmp = SWCRR_SWEN;
|
|
|
|
/* Good, fire up the show */
|
|
if (prescale)
|
|
tmp |= SWCRR_SWPR;
|
|
if (reset)
|
|
tmp |= SWCRR_SWRI;
|
|
|
|
tmp |= timeout << 16;
|
|
|
|
out_be32(&wd_base->swcrr, tmp);
|
|
|
|
del_timer_sync(&wdt_timer);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mpc8xxx_wdt_ping(struct watchdog_device *w)
|
|
{
|
|
mpc8xxx_wdt_keepalive();
|
|
return 0;
|
|
}
|
|
|
|
static int mpc8xxx_wdt_stop(struct watchdog_device *w)
|
|
{
|
|
mod_timer(&wdt_timer, jiffies);
|
|
return 0;
|
|
}
|
|
|
|
static struct watchdog_info mpc8xxx_wdt_info = {
|
|
.options = WDIOF_KEEPALIVEPING,
|
|
.firmware_version = 1,
|
|
.identity = "MPC8xxx",
|
|
};
|
|
|
|
static struct watchdog_ops mpc8xxx_wdt_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = mpc8xxx_wdt_start,
|
|
.ping = mpc8xxx_wdt_ping,
|
|
.stop = mpc8xxx_wdt_stop,
|
|
};
|
|
|
|
static struct watchdog_device mpc8xxx_wdt_dev = {
|
|
.info = &mpc8xxx_wdt_info,
|
|
.ops = &mpc8xxx_wdt_ops,
|
|
};
|
|
|
|
static const struct of_device_id mpc8xxx_wdt_match[];
|
|
static int mpc8xxx_wdt_probe(struct platform_device *ofdev)
|
|
{
|
|
int ret;
|
|
const struct of_device_id *match;
|
|
struct device_node *np = ofdev->dev.of_node;
|
|
const struct mpc8xxx_wdt_type *wdt_type;
|
|
u32 freq = fsl_get_sys_freq();
|
|
bool enabled;
|
|
unsigned int timeout_sec;
|
|
|
|
match = of_match_device(mpc8xxx_wdt_match, &ofdev->dev);
|
|
if (!match)
|
|
return -EINVAL;
|
|
wdt_type = match->data;
|
|
|
|
if (!freq || freq == -1)
|
|
return -EINVAL;
|
|
|
|
wd_base = of_iomap(np, 0);
|
|
if (!wd_base)
|
|
return -ENOMEM;
|
|
|
|
enabled = in_be32(&wd_base->swcrr) & SWCRR_SWEN;
|
|
if (!enabled && wdt_type->hw_enabled) {
|
|
pr_info("could not be enabled in software\n");
|
|
ret = -ENOSYS;
|
|
goto err_unmap;
|
|
}
|
|
|
|
/* Calculate the timeout in seconds */
|
|
if (prescale)
|
|
timeout_sec = (timeout * wdt_type->prescaler) / freq;
|
|
else
|
|
timeout_sec = timeout / freq;
|
|
|
|
mpc8xxx_wdt_dev.timeout = timeout_sec;
|
|
#ifdef MODULE
|
|
ret = mpc8xxx_wdt_init_late();
|
|
if (ret)
|
|
goto err_unmap;
|
|
#endif
|
|
|
|
pr_info("WDT driver for MPC8xxx initialized. mode:%s timeout=%d (%d seconds)\n",
|
|
reset ? "reset" : "interrupt", timeout, timeout_sec);
|
|
|
|
/*
|
|
* If the watchdog was previously enabled or we're running on
|
|
* MPC8xxx, we should ping the wdt from the kernel until the
|
|
* userspace handles it.
|
|
*/
|
|
if (enabled)
|
|
mod_timer(&wdt_timer, jiffies);
|
|
return 0;
|
|
err_unmap:
|
|
iounmap(wd_base);
|
|
wd_base = NULL;
|
|
return ret;
|
|
}
|
|
|
|
static int mpc8xxx_wdt_remove(struct platform_device *ofdev)
|
|
{
|
|
pr_crit("Watchdog removed, expect the %s soon!\n",
|
|
reset ? "reset" : "machine check exception");
|
|
del_timer_sync(&wdt_timer);
|
|
watchdog_unregister_device(&mpc8xxx_wdt_dev);
|
|
iounmap(wd_base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id mpc8xxx_wdt_match[] = {
|
|
{
|
|
.compatible = "mpc83xx_wdt",
|
|
.data = &(struct mpc8xxx_wdt_type) {
|
|
.prescaler = 0x10000,
|
|
},
|
|
},
|
|
{
|
|
.compatible = "fsl,mpc8610-wdt",
|
|
.data = &(struct mpc8xxx_wdt_type) {
|
|
.prescaler = 0x10000,
|
|
.hw_enabled = true,
|
|
},
|
|
},
|
|
{
|
|
.compatible = "fsl,mpc823-wdt",
|
|
.data = &(struct mpc8xxx_wdt_type) {
|
|
.prescaler = 0x800,
|
|
.hw_enabled = true,
|
|
},
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mpc8xxx_wdt_match);
|
|
|
|
static struct platform_driver mpc8xxx_wdt_driver = {
|
|
.probe = mpc8xxx_wdt_probe,
|
|
.remove = mpc8xxx_wdt_remove,
|
|
.driver = {
|
|
.name = "mpc8xxx_wdt",
|
|
.of_match_table = mpc8xxx_wdt_match,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* We do wdt initialization in two steps: arch_initcall probes the wdt
|
|
* very early to start pinging the watchdog (misc devices are not yet
|
|
* available), and later module_init() just registers the misc device.
|
|
*/
|
|
static int mpc8xxx_wdt_init_late(void)
|
|
{
|
|
int ret;
|
|
|
|
if (!wd_base)
|
|
return -ENODEV;
|
|
|
|
watchdog_set_nowayout(&mpc8xxx_wdt_dev, nowayout);
|
|
|
|
ret = watchdog_register_device(&mpc8xxx_wdt_dev);
|
|
if (ret) {
|
|
pr_err("cannot register watchdog device (err=%d)\n", ret);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
#ifndef MODULE
|
|
module_init(mpc8xxx_wdt_init_late);
|
|
#endif
|
|
|
|
static int __init mpc8xxx_wdt_init(void)
|
|
{
|
|
return platform_driver_register(&mpc8xxx_wdt_driver);
|
|
}
|
|
arch_initcall(mpc8xxx_wdt_init);
|
|
|
|
static void __exit mpc8xxx_wdt_exit(void)
|
|
{
|
|
platform_driver_unregister(&mpc8xxx_wdt_driver);
|
|
}
|
|
module_exit(mpc8xxx_wdt_exit);
|
|
|
|
MODULE_AUTHOR("Dave Updegraff, Kumar Gala");
|
|
MODULE_DESCRIPTION("Driver for watchdog timer in MPC8xx/MPC83xx/MPC86xx "
|
|
"uProcessors");
|
|
MODULE_LICENSE("GPL");
|