kernel-fxtec-pro1x/include/asm-i386/mach-es7000/mach_apic.h
Andi Kleen 874c4fe389 [PATCH] i386: Allow to use GENERICARCH for UP kernels
There are some machines around (large xSeries or Unisys ES7000) that
need physical IO-APIC destination mode to access all of their IO
devices. This currently doesn't work in UP kernels as used in
distribution installers.

This patch allows to compile even UP kernels as GENERICARCH which
allows to use physical or clustered APIC mode.

Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:26 +02:00

209 lines
4.8 KiB
C

#ifndef __ASM_MACH_APIC_H
#define __ASM_MACH_APIC_H
extern u8 bios_cpu_apicid[];
#define xapic_phys_to_log_apicid(cpu) (bios_cpu_apicid[cpu])
#define esr_disable (1)
static inline int apic_id_registered(void)
{
return (1);
}
static inline cpumask_t target_cpus(void)
{
#if defined CONFIG_ES7000_CLUSTERED_APIC
return CPU_MASK_ALL;
#else
return cpumask_of_cpu(smp_processor_id());
#endif
}
#define TARGET_CPUS (target_cpus())
#if defined CONFIG_ES7000_CLUSTERED_APIC
#define APIC_DFR_VALUE (APIC_DFR_CLUSTER)
#define INT_DELIVERY_MODE (dest_LowestPrio)
#define INT_DEST_MODE (1) /* logical delivery broadcast to all procs */
#define NO_BALANCE_IRQ (1)
#undef WAKE_SECONDARY_VIA_INIT
#define WAKE_SECONDARY_VIA_MIP
#else
#define APIC_DFR_VALUE (APIC_DFR_FLAT)
#define INT_DELIVERY_MODE (dest_Fixed)
#define INT_DEST_MODE (0) /* phys delivery to target procs */
#define NO_BALANCE_IRQ (0)
#undef APIC_DEST_LOGICAL
#define APIC_DEST_LOGICAL 0x0
#define WAKE_SECONDARY_VIA_INIT
#endif
static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
{
return 0;
}
static inline unsigned long check_apicid_present(int bit)
{
return physid_isset(bit, phys_cpu_present_map);
}
#define apicid_cluster(apicid) (apicid & 0xF0)
static inline unsigned long calculate_ldr(int cpu)
{
unsigned long id;
id = xapic_phys_to_log_apicid(cpu);
return (SET_APIC_LOGICAL_ID(id));
}
/*
* Set up the logical destination ID.
*
* Intel recommends to set DFR, LdR and TPR before enabling
* an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
* document number 292116). So here it goes...
*/
static inline void init_apic_ldr(void)
{
unsigned long val;
int cpu = smp_processor_id();
apic_write_around(APIC_DFR, APIC_DFR_VALUE);
val = calculate_ldr(cpu);
apic_write_around(APIC_LDR, val);
}
extern void es7000_sw_apic(void);
static inline void enable_apic_mode(void)
{
es7000_sw_apic();
return;
}
extern int apic_version [MAX_APICS];
static inline void clustered_apic_check(void)
{
int apic = bios_cpu_apicid[smp_processor_id()];
printk("Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n",
(apic_version[apic] == 0x14) ?
"Physical Cluster" : "Logical Cluster", nr_ioapics, cpus_addr(TARGET_CPUS)[0]);
}
static inline int multi_timer_check(int apic, int irq)
{
return 0;
}
static inline int apicid_to_node(int logical_apicid)
{
return 0;
}
static inline int cpu_present_to_apicid(int mps_cpu)
{
if (!mps_cpu)
return boot_cpu_physical_apicid;
else if (mps_cpu < NR_CPUS)
return (int) bios_cpu_apicid[mps_cpu];
else
return BAD_APICID;
}
static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
{
static int id = 0;
physid_mask_t mask;
mask = physid_mask_of_physid(id);
++id;
return mask;
}
extern u8 cpu_2_logical_apicid[];
/* Mapping from cpu number to logical apicid */
static inline int cpu_to_logical_apicid(int cpu)
{
#ifdef CONFIG_SMP
if (cpu >= NR_CPUS)
return BAD_APICID;
return (int)cpu_2_logical_apicid[cpu];
#else
return logical_smp_processor_id();
#endif
}
static inline int mpc_apic_id(struct mpc_config_processor *m, struct mpc_config_translation *unused)
{
printk("Processor #%d %ld:%ld APIC version %d\n",
m->mpc_apicid,
(m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
(m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
m->mpc_apicver);
return (m->mpc_apicid);
}
static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
{
/* For clustered we don't have a good way to do this yet - hack */
return physids_promote(0xff);
}
static inline void setup_portio_remap(void)
{
}
extern unsigned int boot_cpu_physical_apicid;
static inline int check_phys_apicid_present(int cpu_physical_apicid)
{
boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
return (1);
}
static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
{
int num_bits_set;
int cpus_found = 0;
int cpu;
int apicid;
num_bits_set = cpus_weight(cpumask);
/* Return id to all */
if (num_bits_set == NR_CPUS)
#if defined CONFIG_ES7000_CLUSTERED_APIC
return 0xFF;
#else
return cpu_to_logical_apicid(0);
#endif
/*
* The cpus in the mask must all be on the apic cluster. If are not
* on the same apicid cluster return default value of TARGET_CPUS.
*/
cpu = first_cpu(cpumask);
apicid = cpu_to_logical_apicid(cpu);
while (cpus_found < num_bits_set) {
if (cpu_isset(cpu, cpumask)) {
int new_apicid = cpu_to_logical_apicid(cpu);
if (apicid_cluster(apicid) !=
apicid_cluster(new_apicid)){
printk ("%s: Not a valid mask!\n",__FUNCTION__);
#if defined CONFIG_ES7000_CLUSTERED_APIC
return 0xFF;
#else
return cpu_to_logical_apicid(0);
#endif
}
apicid = new_apicid;
cpus_found++;
}
cpu++;
}
return apicid;
}
static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
{
return cpuid_apic >> index_msb;
}
#endif /* __ASM_MACH_APIC_H */