7a569f524d
This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
346 lines
8.6 KiB
C
346 lines
8.6 KiB
C
/* ir-sysfs.c - sysfs interface for RC devices (/sys/class/rc)
|
|
*
|
|
* Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/slab.h>
|
|
#include <linux/input.h>
|
|
#include <linux/device.h>
|
|
#include "ir-core-priv.h"
|
|
|
|
#define IRRCV_NUM_DEVICES 256
|
|
|
|
/* bit array to represent IR sysfs device number */
|
|
static unsigned long ir_core_dev_number;
|
|
|
|
/* class for /sys/class/rc */
|
|
static char *ir_devnode(struct device *dev, mode_t *mode)
|
|
{
|
|
return kasprintf(GFP_KERNEL, "rc/%s", dev_name(dev));
|
|
}
|
|
|
|
static struct class ir_input_class = {
|
|
.name = "rc",
|
|
.devnode = ir_devnode,
|
|
};
|
|
|
|
static struct {
|
|
u64 type;
|
|
char *name;
|
|
} proto_names[] = {
|
|
{ IR_TYPE_UNKNOWN, "unknown" },
|
|
{ IR_TYPE_RC5, "rc-5" },
|
|
{ IR_TYPE_NEC, "nec" },
|
|
{ IR_TYPE_RC6, "rc-6" },
|
|
{ IR_TYPE_JVC, "jvc" },
|
|
{ IR_TYPE_SONY, "sony" },
|
|
{ IR_TYPE_RC5_SZ, "rc-5-sz" },
|
|
{ IR_TYPE_LIRC, "lirc" },
|
|
};
|
|
|
|
#define PROTO_NONE "none"
|
|
|
|
/**
|
|
* show_protocols() - shows the current IR protocol(s)
|
|
* @d: the device descriptor
|
|
* @mattr: the device attribute struct (unused)
|
|
* @buf: a pointer to the output buffer
|
|
*
|
|
* This routine is a callback routine for input read the IR protocol type(s).
|
|
* it is trigged by reading /sys/class/rc/rc?/protocols.
|
|
* It returns the protocol names of supported protocols.
|
|
* Enabled protocols are printed in brackets.
|
|
*/
|
|
static ssize_t show_protocols(struct device *d,
|
|
struct device_attribute *mattr, char *buf)
|
|
{
|
|
struct ir_input_dev *ir_dev = dev_get_drvdata(d);
|
|
u64 allowed, enabled;
|
|
char *tmp = buf;
|
|
int i;
|
|
|
|
if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
|
|
enabled = ir_dev->rc_tab.ir_type;
|
|
allowed = ir_dev->props->allowed_protos;
|
|
} else if (ir_dev->raw) {
|
|
enabled = ir_dev->raw->enabled_protocols;
|
|
allowed = ir_raw_get_allowed_protocols();
|
|
} else
|
|
return sprintf(tmp, "[builtin]\n");
|
|
|
|
IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
|
|
(long long)allowed,
|
|
(long long)enabled);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
|
|
if (allowed & enabled & proto_names[i].type)
|
|
tmp += sprintf(tmp, "[%s] ", proto_names[i].name);
|
|
else if (allowed & proto_names[i].type)
|
|
tmp += sprintf(tmp, "%s ", proto_names[i].name);
|
|
}
|
|
|
|
if (tmp != buf)
|
|
tmp--;
|
|
*tmp = '\n';
|
|
return tmp + 1 - buf;
|
|
}
|
|
|
|
/**
|
|
* store_protocols() - changes the current IR protocol(s)
|
|
* @d: the device descriptor
|
|
* @mattr: the device attribute struct (unused)
|
|
* @buf: a pointer to the input buffer
|
|
* @len: length of the input buffer
|
|
*
|
|
* This routine is a callback routine for changing the IR protocol type.
|
|
* It is trigged by writing to /sys/class/rc/rc?/protocols.
|
|
* Writing "+proto" will add a protocol to the list of enabled protocols.
|
|
* Writing "-proto" will remove a protocol from the list of enabled protocols.
|
|
* Writing "proto" will enable only "proto".
|
|
* Writing "none" will disable all protocols.
|
|
* Returns -EINVAL if an invalid protocol combination or unknown protocol name
|
|
* is used, otherwise @len.
|
|
*/
|
|
static ssize_t store_protocols(struct device *d,
|
|
struct device_attribute *mattr,
|
|
const char *data,
|
|
size_t len)
|
|
{
|
|
struct ir_input_dev *ir_dev = dev_get_drvdata(d);
|
|
bool enable, disable;
|
|
const char *tmp;
|
|
u64 type;
|
|
u64 mask;
|
|
int rc, i, count = 0;
|
|
unsigned long flags;
|
|
|
|
if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
|
|
type = ir_dev->rc_tab.ir_type;
|
|
else if (ir_dev->raw)
|
|
type = ir_dev->raw->enabled_protocols;
|
|
else {
|
|
IR_dprintk(1, "Protocol switching not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
while ((tmp = strsep((char **) &data, " \n")) != NULL) {
|
|
if (!*tmp)
|
|
break;
|
|
|
|
if (*tmp == '+') {
|
|
enable = true;
|
|
disable = false;
|
|
tmp++;
|
|
} else if (*tmp == '-') {
|
|
enable = false;
|
|
disable = true;
|
|
tmp++;
|
|
} else {
|
|
enable = false;
|
|
disable = false;
|
|
}
|
|
|
|
if (!enable && !disable && !strncasecmp(tmp, PROTO_NONE, sizeof(PROTO_NONE))) {
|
|
tmp += sizeof(PROTO_NONE);
|
|
mask = 0;
|
|
count++;
|
|
} else {
|
|
for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
|
|
if (!strncasecmp(tmp, proto_names[i].name, strlen(proto_names[i].name))) {
|
|
tmp += strlen(proto_names[i].name);
|
|
mask = proto_names[i].type;
|
|
break;
|
|
}
|
|
}
|
|
if (i == ARRAY_SIZE(proto_names)) {
|
|
IR_dprintk(1, "Unknown protocol: '%s'\n", tmp);
|
|
return -EINVAL;
|
|
}
|
|
count++;
|
|
}
|
|
|
|
if (enable)
|
|
type |= mask;
|
|
else if (disable)
|
|
type &= ~mask;
|
|
else
|
|
type = mask;
|
|
}
|
|
|
|
if (!count) {
|
|
IR_dprintk(1, "Protocol not specified\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (ir_dev->props && ir_dev->props->change_protocol) {
|
|
rc = ir_dev->props->change_protocol(ir_dev->props->priv,
|
|
type);
|
|
if (rc < 0) {
|
|
IR_dprintk(1, "Error setting protocols to 0x%llx\n",
|
|
(long long)type);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
|
|
spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
|
|
ir_dev->rc_tab.ir_type = type;
|
|
spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
|
|
} else {
|
|
ir_dev->raw->enabled_protocols = type;
|
|
}
|
|
|
|
IR_dprintk(1, "Current protocol(s): 0x%llx\n",
|
|
(long long)type);
|
|
|
|
return len;
|
|
}
|
|
|
|
#define ADD_HOTPLUG_VAR(fmt, val...) \
|
|
do { \
|
|
int err = add_uevent_var(env, fmt, val); \
|
|
if (err) \
|
|
return err; \
|
|
} while (0)
|
|
|
|
static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env)
|
|
{
|
|
struct ir_input_dev *ir_dev = dev_get_drvdata(device);
|
|
|
|
if (ir_dev->rc_tab.name)
|
|
ADD_HOTPLUG_VAR("NAME=%s", ir_dev->rc_tab.name);
|
|
if (ir_dev->driver_name)
|
|
ADD_HOTPLUG_VAR("DRV_NAME=%s", ir_dev->driver_name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Static device attribute struct with the sysfs attributes for IR's
|
|
*/
|
|
static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR,
|
|
show_protocols, store_protocols);
|
|
|
|
static struct attribute *rc_dev_attrs[] = {
|
|
&dev_attr_protocols.attr,
|
|
NULL,
|
|
};
|
|
|
|
static struct attribute_group rc_dev_attr_grp = {
|
|
.attrs = rc_dev_attrs,
|
|
};
|
|
|
|
static const struct attribute_group *rc_dev_attr_groups[] = {
|
|
&rc_dev_attr_grp,
|
|
NULL
|
|
};
|
|
|
|
static struct device_type rc_dev_type = {
|
|
.groups = rc_dev_attr_groups,
|
|
.uevent = rc_dev_uevent,
|
|
};
|
|
|
|
/**
|
|
* ir_register_class() - creates the sysfs for /sys/class/rc/rc?
|
|
* @input_dev: the struct input_dev descriptor of the device
|
|
*
|
|
* This routine is used to register the syfs code for IR class
|
|
*/
|
|
int ir_register_class(struct input_dev *input_dev)
|
|
{
|
|
int rc;
|
|
const char *path;
|
|
struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
|
|
int devno = find_first_zero_bit(&ir_core_dev_number,
|
|
IRRCV_NUM_DEVICES);
|
|
|
|
if (unlikely(devno < 0))
|
|
return devno;
|
|
|
|
ir_dev->dev.type = &rc_dev_type;
|
|
|
|
ir_dev->dev.class = &ir_input_class;
|
|
ir_dev->dev.parent = input_dev->dev.parent;
|
|
dev_set_name(&ir_dev->dev, "rc%d", devno);
|
|
dev_set_drvdata(&ir_dev->dev, ir_dev);
|
|
rc = device_register(&ir_dev->dev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
|
|
input_dev->dev.parent = &ir_dev->dev;
|
|
rc = input_register_device(input_dev);
|
|
if (rc < 0) {
|
|
device_del(&ir_dev->dev);
|
|
return rc;
|
|
}
|
|
|
|
__module_get(THIS_MODULE);
|
|
|
|
path = kobject_get_path(&ir_dev->dev.kobj, GFP_KERNEL);
|
|
printk(KERN_INFO "%s: %s as %s\n",
|
|
dev_name(&ir_dev->dev),
|
|
input_dev->name ? input_dev->name : "Unspecified device",
|
|
path ? path : "N/A");
|
|
kfree(path);
|
|
|
|
ir_dev->devno = devno;
|
|
set_bit(devno, &ir_core_dev_number);
|
|
|
|
return 0;
|
|
};
|
|
|
|
/**
|
|
* ir_unregister_class() - removes the sysfs for sysfs for
|
|
* /sys/class/rc/rc?
|
|
* @input_dev: the struct input_dev descriptor of the device
|
|
*
|
|
* This routine is used to unregister the syfs code for IR class
|
|
*/
|
|
void ir_unregister_class(struct input_dev *input_dev)
|
|
{
|
|
struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
|
|
|
|
clear_bit(ir_dev->devno, &ir_core_dev_number);
|
|
input_unregister_device(input_dev);
|
|
device_del(&ir_dev->dev);
|
|
|
|
module_put(THIS_MODULE);
|
|
}
|
|
|
|
/*
|
|
* Init/exit code for the module. Basically, creates/removes /sys/class/rc
|
|
*/
|
|
|
|
static int __init ir_core_init(void)
|
|
{
|
|
int rc = class_register(&ir_input_class);
|
|
if (rc) {
|
|
printk(KERN_ERR "ir_core: unable to register rc class\n");
|
|
return rc;
|
|
}
|
|
|
|
/* Initialize/load the decoders/keymap code that will be used */
|
|
ir_raw_init();
|
|
ir_rcmap_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit ir_core_exit(void)
|
|
{
|
|
class_unregister(&ir_input_class);
|
|
ir_rcmap_cleanup();
|
|
}
|
|
|
|
module_init(ir_core_init);
|
|
module_exit(ir_core_exit);
|