kernel-fxtec-pro1x/drivers/net/wireless/rt2x00/rt2x00lib.h
Lars Ericsson eb87eaac52 rt2x00: Don't alter rt2x00dev->default_ant
rt2x00dev->default_ant should be initialized once by the driver,
and should not be changed afterwards. Because rt2x00lib_config_antenna()
was using a reference to the struct antenna_setup it actually had the oppurtunity
to change the default antenna setting and it actually did that during the validation.

Instead of passing a pointer to antenna_setup the entire structure should be copied.

Signed-off-by: Lars Ericsson <Lars_Ericsson@telia.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27 15:24:08 -04:00

449 lines
13 KiB
C

/*
Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
Module: rt2x00lib
Abstract: Data structures and definitions for the rt2x00lib module.
*/
#ifndef RT2X00LIB_H
#define RT2X00LIB_H
#include "rt2x00dump.h"
/*
* Interval defines
*/
#define LINK_TUNE_INTERVAL round_jiffies_relative(HZ)
/*
* rt2x00_rate: Per rate device information
*/
struct rt2x00_rate {
unsigned short flags;
#define DEV_RATE_CCK 0x0001
#define DEV_RATE_OFDM 0x0002
#define DEV_RATE_SHORT_PREAMBLE 0x0004
unsigned short bitrate; /* In 100kbit/s */
unsigned short ratemask;
unsigned short plcp;
unsigned short mcs;
};
extern const struct rt2x00_rate rt2x00_supported_rates[12];
static inline const struct rt2x00_rate *rt2x00_get_rate(const u16 hw_value)
{
return &rt2x00_supported_rates[hw_value & 0xff];
}
#define RATE_MCS(__mode, __mcs) \
( (((__mode) & 0x00ff) << 8) | ((__mcs) & 0x00ff) )
static inline int rt2x00_get_rate_mcs(const u16 mcs_value)
{
return (mcs_value & 0x00ff);
}
/*
* Radio control handlers.
*/
int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state);
/*
* Initialization handlers.
*/
int rt2x00lib_start(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev);
/*
* Configuration handlers.
*/
void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev,
struct rt2x00_intf *intf,
enum nl80211_iftype type,
const u8 *mac, const u8 *bssid);
void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev,
struct rt2x00_intf *intf,
struct ieee80211_bss_conf *conf);
void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
struct antenna_setup ant);
void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
struct ieee80211_conf *conf,
const unsigned int changed_flags);
/**
* DOC: Queue handlers
*/
/**
* rt2x00queue_alloc_rxskb - allocate a skb for RX purposes.
* @rt2x00dev: Pointer to &struct rt2x00_dev.
* @queue: The queue for which the skb will be applicable.
*/
struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev,
struct queue_entry *entry);
/**
* rt2x00queue_unmap_skb - Unmap a skb from DMA.
* @rt2x00dev: Pointer to &struct rt2x00_dev.
* @skb: The skb to unmap.
*/
void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
/**
* rt2x00queue_free_skb - free a skb
* @rt2x00dev: Pointer to &struct rt2x00_dev.
* @skb: The skb to free.
*/
void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
/**
* rt2x00queue_payload_align - Align 802.11 payload to 4-byte boundary
* @skb: The skb to align
* @l2pad: Should L2 padding be used
* @header_length: Length of 802.11 header
*
* This function prepares the @skb to be send to the device or mac80211.
* If @l2pad is set to true padding will occur between the 802.11 header
* and payload. Otherwise the padding will be done in front of the 802.11
* header.
* When @l2pad is set the function will check for the &SKBDESC_L2_PADDED
* flag in &skb_frame_desc. If that flag is set, the padding is removed
* and the flag cleared. Otherwise the padding is added and the flag is set.
*/
void rt2x00queue_payload_align(struct sk_buff *skb,
bool l2pad, unsigned int header_length);
/**
* rt2x00queue_write_tx_frame - Write TX frame to hardware
* @queue: Queue over which the frame should be send
* @skb: The skb to send
*/
int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb);
/**
* rt2x00queue_update_beacon - Send new beacon from mac80211 to hardware
* @rt2x00dev: Pointer to &struct rt2x00_dev.
* @vif: Interface for which the beacon should be updated.
* @enable_beacon: Enable beaconing
*/
int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
struct ieee80211_vif *vif,
const bool enable_beacon);
/**
* rt2x00queue_index_inc - Index incrementation function
* @queue: Queue (&struct data_queue) to perform the action on.
* @index: Index type (&enum queue_index) to perform the action on.
*
* This function will increase the requested index on the queue,
* it will grab the appropriate locks and handle queue overflow events by
* resetting the index to the start of the queue.
*/
void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index);
/**
* rt2x00queue_stop_queues - Halt all data queues
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
* This function will loop through all available queues to stop
* any pending outgoing frames.
*/
void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev);
/**
* rt2x00queue_init_queues - Initialize all data queues
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
* This function will loop through all available queues to clear all
* index numbers and set the queue entry to the correct initialization
* state.
*/
void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev);
int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev);
void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev);
int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev);
void rt2x00queue_free(struct rt2x00_dev *rt2x00dev);
/**
* rt2x00link_update_stats - Update link statistics from RX frame
* @rt2x00dev: Pointer to &struct rt2x00_dev.
* @skb: Received frame
* @rxdesc: Received frame descriptor
*
* Update link statistics based on the information from the
* received frame descriptor.
*/
void rt2x00link_update_stats(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb,
struct rxdone_entry_desc *rxdesc);
/**
* rt2x00link_calculate_signal - Calculate signal quality
* @rt2x00dev: Pointer to &struct rt2x00_dev.
* @rssi: RX Frame RSSI
*
* Calculate the signal quality of a frame based on the rssi
* measured during the receiving of the frame and the global
* link quality statistics measured since the start of the
* link tuning. The result is a value between 0 and 100 which
* is an indication of the signal quality.
*/
int rt2x00link_calculate_signal(struct rt2x00_dev *rt2x00dev, int rssi);
/**
* rt2x00link_start_tuner - Start periodic link tuner work
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
* This start the link tuner periodic work, this work will
* be executed periodically until &rt2x00link_stop_tuner has
* been called.
*/
void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev);
/**
* rt2x00link_stop_tuner - Stop periodic link tuner work
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
* After this function completed the link tuner will not
* be running until &rt2x00link_start_tuner is called.
*/
void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev);
/**
* rt2x00link_reset_tuner - Reset periodic link tuner work
* @rt2x00dev: Pointer to &struct rt2x00_dev.
* @antenna: Should the antenna tuning also be reset
*
* The VGC limit configured in the hardware will be reset to 0
* which forces the driver to rediscover the correct value for
* the current association. This is needed when configuration
* options have changed which could drastically change the
* SNR level or link quality (i.e. changing the antenna setting).
*
* Resetting the link tuner will also cause the periodic work counter
* to be reset. Any driver which has a fixed limit on the number
* of rounds the link tuner is supposed to work will accept the
* tuner actions again if this limit was previously reached.
*
* If @antenna is set to true a the software antenna diversity
* tuning will also be reset.
*/
void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna);
/**
* rt2x00link_register - Initialize link tuning functionality
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
* Initialize work structure and all link tuning related
* parameters. This will not start the link tuning process itself.
*/
void rt2x00link_register(struct rt2x00_dev *rt2x00dev);
/*
* Firmware handlers.
*/
#ifdef CONFIG_RT2X00_LIB_FIRMWARE
int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev);
#else
static inline int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev)
{
return 0;
}
static inline void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev)
{
}
#endif /* CONFIG_RT2X00_LIB_FIRMWARE */
/*
* Debugfs handlers.
*/
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
void rt2x00debug_register(struct rt2x00_dev *rt2x00dev);
void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev);
void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
enum rt2x00_dump_type type, struct sk_buff *skb);
void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
struct rxdone_entry_desc *rxdesc);
#else
static inline void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
{
}
static inline void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev)
{
}
static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
enum rt2x00_dump_type type,
struct sk_buff *skb)
{
}
static inline void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
struct rxdone_entry_desc *rxdesc)
{
}
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
/*
* Crypto handlers.
*/
#ifdef CONFIG_RT2X00_LIB_CRYPTO
enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key);
void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry,
struct txentry_desc *txdesc);
unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb);
void rt2x00crypto_tx_copy_iv(struct sk_buff *skb,
struct txentry_desc *txdesc);
void rt2x00crypto_tx_remove_iv(struct sk_buff *skb,
struct txentry_desc *txdesc);
void rt2x00crypto_tx_insert_iv(struct sk_buff *skb, unsigned int header_length);
void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad,
unsigned int header_length,
struct rxdone_entry_desc *rxdesc);
#else
static inline enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key)
{
return CIPHER_NONE;
}
static inline void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry,
struct txentry_desc *txdesc)
{
}
static inline unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb)
{
return 0;
}
static inline void rt2x00crypto_tx_copy_iv(struct sk_buff *skb,
struct txentry_desc *txdesc)
{
}
static inline void rt2x00crypto_tx_remove_iv(struct sk_buff *skb,
struct txentry_desc *txdesc)
{
}
static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb,
unsigned int header_length)
{
}
static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad,
unsigned int header_length,
struct rxdone_entry_desc *rxdesc)
{
}
#endif /* CONFIG_RT2X00_LIB_CRYPTO */
/*
* HT handlers.
*/
#ifdef CONFIG_RT2X00_LIB_HT
void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
struct txentry_desc *txdesc,
const struct rt2x00_rate *hwrate);
#else
static inline void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
struct txentry_desc *txdesc,
const struct rt2x00_rate *hwrate)
{
}
#endif /* CONFIG_RT2X00_LIB_HT */
/*
* RFkill handlers.
*/
static inline void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
{
if (test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
wiphy_rfkill_start_polling(rt2x00dev->hw->wiphy);
}
static inline void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
{
if (test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
wiphy_rfkill_stop_polling(rt2x00dev->hw->wiphy);
}
/*
* LED handlers
*/
#ifdef CONFIG_RT2X00_LIB_LEDS
void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev, int rssi);
void rt2x00led_led_activity(struct rt2x00_dev *rt2x00dev, bool enabled);
void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev, bool enabled);
void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev, bool enabled);
void rt2x00leds_register(struct rt2x00_dev *rt2x00dev);
void rt2x00leds_unregister(struct rt2x00_dev *rt2x00dev);
void rt2x00leds_suspend(struct rt2x00_dev *rt2x00dev);
void rt2x00leds_resume(struct rt2x00_dev *rt2x00dev);
#else
static inline void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev,
int rssi)
{
}
static inline void rt2x00led_led_activity(struct rt2x00_dev *rt2x00dev,
bool enabled)
{
}
static inline void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev,
bool enabled)
{
}
static inline void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev,
bool enabled)
{
}
static inline void rt2x00leds_register(struct rt2x00_dev *rt2x00dev)
{
}
static inline void rt2x00leds_unregister(struct rt2x00_dev *rt2x00dev)
{
}
static inline void rt2x00leds_suspend(struct rt2x00_dev *rt2x00dev)
{
}
static inline void rt2x00leds_resume(struct rt2x00_dev *rt2x00dev)
{
}
#endif /* CONFIG_RT2X00_LIB_LEDS */
#endif /* RT2X00LIB_H */