6c0a11c118
On the 85xx/86xx PCIe controllers if there is no device connected to the PHB we will still allocate a pci_bus for downstream bus of the virtual P2P bridge. However the resources allocated to the downstream bus are not correct and so we just mimic the resources from the upstream pci_bus. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
88 lines
3.4 KiB
C
88 lines
3.4 KiB
C
/*
|
|
* MPC85xx/86xx PCI Express structure define
|
|
*
|
|
* Copyright 2007 Freescale Semiconductor, Inc
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#ifdef __KERNEL__
|
|
#ifndef __POWERPC_FSL_PCI_H
|
|
#define __POWERPC_FSL_PCI_H
|
|
|
|
#define PCIE_LTSSM 0x0404 /* PCIE Link Training and Status */
|
|
#define PCIE_LTSSM_L0 0x16 /* L0 state */
|
|
#define PIWAR_2G 0xa0f5501e /* Enable, Prefetch, Local Mem, Snoop R/W, 2G */
|
|
|
|
/* PCI/PCI Express outbound window reg */
|
|
struct pci_outbound_window_regs {
|
|
__be32 potar; /* 0x.0 - Outbound translation address register */
|
|
__be32 potear; /* 0x.4 - Outbound translation extended address register */
|
|
__be32 powbar; /* 0x.8 - Outbound window base address register */
|
|
u8 res1[4];
|
|
__be32 powar; /* 0x.10 - Outbound window attributes register */
|
|
u8 res2[12];
|
|
};
|
|
|
|
/* PCI/PCI Express inbound window reg */
|
|
struct pci_inbound_window_regs {
|
|
__be32 pitar; /* 0x.0 - Inbound translation address register */
|
|
u8 res1[4];
|
|
__be32 piwbar; /* 0x.8 - Inbound window base address register */
|
|
__be32 piwbear; /* 0x.c - Inbound window base extended address register */
|
|
__be32 piwar; /* 0x.10 - Inbound window attributes register */
|
|
u8 res2[12];
|
|
};
|
|
|
|
/* PCI/PCI Express IO block registers for 85xx/86xx */
|
|
struct ccsr_pci {
|
|
__be32 config_addr; /* 0x.000 - PCI/PCIE Configuration Address Register */
|
|
__be32 config_data; /* 0x.004 - PCI/PCIE Configuration Data Register */
|
|
__be32 int_ack; /* 0x.008 - PCI Interrupt Acknowledge Register */
|
|
__be32 pex_otb_cpl_tor; /* 0x.00c - PCIE Outbound completion timeout register */
|
|
__be32 pex_conf_tor; /* 0x.010 - PCIE configuration timeout register */
|
|
u8 res2[12];
|
|
__be32 pex_pme_mes_dr; /* 0x.020 - PCIE PME and message detect register */
|
|
__be32 pex_pme_mes_disr; /* 0x.024 - PCIE PME and message disable register */
|
|
__be32 pex_pme_mes_ier; /* 0x.028 - PCIE PME and message interrupt enable register */
|
|
__be32 pex_pmcr; /* 0x.02c - PCIE power management command register */
|
|
u8 res3[3024];
|
|
|
|
/* PCI/PCI Express outbound window 0-4
|
|
* Window 0 is the default window and is the only window enabled upon reset.
|
|
* The default outbound register set is used when a transaction misses
|
|
* in all of the other outbound windows.
|
|
*/
|
|
struct pci_outbound_window_regs pow[5];
|
|
|
|
u8 res14[256];
|
|
|
|
/* PCI/PCI Express inbound window 3-1
|
|
* inbound window 1 supports only a 32-bit base address and does not
|
|
* define an inbound window base extended address register.
|
|
*/
|
|
struct pci_inbound_window_regs piw[3];
|
|
|
|
__be32 pex_err_dr; /* 0x.e00 - PCI/PCIE error detect register */
|
|
u8 res21[4];
|
|
__be32 pex_err_en; /* 0x.e08 - PCI/PCIE error interrupt enable register */
|
|
u8 res22[4];
|
|
__be32 pex_err_disr; /* 0x.e10 - PCI/PCIE error disable register */
|
|
u8 res23[12];
|
|
__be32 pex_err_cap_stat; /* 0x.e20 - PCI/PCIE error capture status register */
|
|
u8 res24[4];
|
|
__be32 pex_err_cap_r0; /* 0x.e28 - PCIE error capture register 0 */
|
|
__be32 pex_err_cap_r1; /* 0x.e2c - PCIE error capture register 0 */
|
|
__be32 pex_err_cap_r2; /* 0x.e30 - PCIE error capture register 0 */
|
|
__be32 pex_err_cap_r3; /* 0x.e34 - PCIE error capture register 0 */
|
|
};
|
|
|
|
extern int fsl_add_bridge(struct device_node *dev, int is_primary);
|
|
extern void fsl_pcibios_fixup_bus(struct pci_bus *bus);
|
|
|
|
#endif /* __POWERPC_FSL_PCI_H */
|
|
#endif /* __KERNEL__ */
|