3872f19d96
Audio cards wth have AVB or BLU Link IO. Tuner card with DAB receiver Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
1735 lines
56 KiB
C
1735 lines
56 KiB
C
/******************************************************************************
|
|
|
|
AudioScience HPI driver
|
|
Copyright (C) 1997-2011 AudioScience Inc. <support@audioscience.com>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of version 2 of the GNU General Public License as
|
|
published by the Free Software Foundation;
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
*/
|
|
/** \file hpi.h
|
|
|
|
AudioScience Hardware Programming Interface (HPI)
|
|
public API definition.
|
|
|
|
The HPI is a low-level hardware abstraction layer to all
|
|
AudioScience digital audio adapters
|
|
|
|
(C) Copyright AudioScience Inc. 1998-2010
|
|
*/
|
|
|
|
#ifndef _HPI_H_
|
|
#define _HPI_H_
|
|
|
|
#include <linux/types.h>
|
|
#define HPI_BUILD_KERNEL_MODE
|
|
|
|
/******************************************************************************/
|
|
/******** HPI API DEFINITIONS *****/
|
|
/******************************************************************************/
|
|
|
|
/*******************************************/
|
|
/** Audio format types
|
|
\ingroup stream
|
|
*/
|
|
enum HPI_FORMATS {
|
|
/** Used internally on adapter. */
|
|
HPI_FORMAT_MIXER_NATIVE = 0,
|
|
/** 8-bit unsigned PCM. Windows equivalent is WAVE_FORMAT_PCM. */
|
|
HPI_FORMAT_PCM8_UNSIGNED = 1,
|
|
/** 16-bit signed PCM. Windows equivalent is WAVE_FORMAT_PCM. */
|
|
HPI_FORMAT_PCM16_SIGNED = 2,
|
|
/** MPEG-1 Layer-1. */
|
|
HPI_FORMAT_MPEG_L1 = 3,
|
|
/** MPEG-1 Layer-2.
|
|
|
|
Windows equivalent is WAVE_FORMAT_MPEG.
|
|
|
|
The following table shows what combinations of mode and bitrate are possible:
|
|
|
|
<table border=1 cellspacing=0 cellpadding=5>
|
|
<tr>
|
|
<td><p><b>Bitrate (kbs)</b></p>
|
|
<td><p><b>Mono</b></p>
|
|
<td><p><b>Stereo,<br>Joint Stereo or<br>Dual Channel</b></p>
|
|
|
|
<tr><td>32<td>X<td>_
|
|
<tr><td>40<td>_<td>_
|
|
<tr><td>48<td>X<td>_
|
|
<tr><td>56<td>X<td>_
|
|
<tr><td>64<td>X<td>X
|
|
<tr><td>80<td>X<td>_
|
|
<tr><td>96<td>X<td>X
|
|
<tr><td>112<td>X<td>X
|
|
<tr><td>128<td>X<td>X
|
|
<tr><td>160<td>X<td>X
|
|
<tr><td>192<td>X<td>X
|
|
<tr><td>224<td>_<td>X
|
|
<tr><td>256<td>-<td>X
|
|
<tr><td>320<td>-<td>X
|
|
<tr><td>384<td>_<td>X
|
|
</table>
|
|
*/
|
|
HPI_FORMAT_MPEG_L2 = 4,
|
|
/** MPEG-1 Layer-3.
|
|
Windows equivalent is WAVE_FORMAT_MPEG.
|
|
|
|
The following table shows what combinations of mode and bitrate are possible:
|
|
|
|
<table border=1 cellspacing=0 cellpadding=5>
|
|
<tr>
|
|
<td><p><b>Bitrate (kbs)</b></p>
|
|
<td><p><b>Mono<br>Stereo @ 8,<br>11.025 and<br>12kHz*</b></p>
|
|
<td><p><b>Mono<br>Stereo @ 16,<br>22.050 and<br>24kHz*</b></p>
|
|
<td><p><b>Mono<br>Stereo @ 32,<br>44.1 and<br>48kHz</b></p>
|
|
|
|
<tr><td>16<td>X<td>X<td>_
|
|
<tr><td>24<td>X<td>X<td>_
|
|
<tr><td>32<td>X<td>X<td>X
|
|
<tr><td>40<td>X<td>X<td>X
|
|
<tr><td>48<td>X<td>X<td>X
|
|
<tr><td>56<td>X<td>X<td>X
|
|
<tr><td>64<td>X<td>X<td>X
|
|
<tr><td>80<td>_<td>X<td>X
|
|
<tr><td>96<td>_<td>X<td>X
|
|
<tr><td>112<td>_<td>X<td>X
|
|
<tr><td>128<td>_<td>X<td>X
|
|
<tr><td>144<td>_<td>X<td>_
|
|
<tr><td>160<td>_<td>X<td>X
|
|
<tr><td>192<td>_<td>_<td>X
|
|
<tr><td>224<td>_<td>_<td>X
|
|
<tr><td>256<td>-<td>_<td>X
|
|
<tr><td>320<td>-<td>_<td>X
|
|
</table>
|
|
\b * Available on the ASI6000 series only
|
|
*/
|
|
HPI_FORMAT_MPEG_L3 = 5,
|
|
/** Dolby AC-2. */
|
|
HPI_FORMAT_DOLBY_AC2 = 6,
|
|
/** Dolbt AC-3. */
|
|
HPI_FORMAT_DOLBY_AC3 = 7,
|
|
/** 16-bit PCM big-endian. */
|
|
HPI_FORMAT_PCM16_BIGENDIAN = 8,
|
|
/** TAGIT-1 algorithm - hits. */
|
|
HPI_FORMAT_AA_TAGIT1_HITS = 9,
|
|
/** TAGIT-1 algorithm - inserts. */
|
|
HPI_FORMAT_AA_TAGIT1_INSERTS = 10,
|
|
/** 32-bit signed PCM. Windows equivalent is WAVE_FORMAT_PCM.
|
|
Each sample is a 32bit word. The most significant 24 bits contain a 24-bit
|
|
sample and the least significant 8 bits are set to 0.
|
|
*/
|
|
HPI_FORMAT_PCM32_SIGNED = 11,
|
|
/** Raw bitstream - unknown format. */
|
|
HPI_FORMAT_RAW_BITSTREAM = 12,
|
|
/** TAGIT-1 algorithm hits - extended. */
|
|
HPI_FORMAT_AA_TAGIT1_HITS_EX1 = 13,
|
|
/** 32-bit PCM as an IEEE float. Windows equivalent is WAVE_FORMAT_IEEE_FLOAT.
|
|
Each sample is a 32bit word in IEEE754 floating point format.
|
|
The range is +1.0 to -1.0, which corresponds to digital fullscale.
|
|
*/
|
|
HPI_FORMAT_PCM32_FLOAT = 14,
|
|
/** 24-bit PCM signed. Windows equivalent is WAVE_FORMAT_PCM. */
|
|
HPI_FORMAT_PCM24_SIGNED = 15,
|
|
/** OEM format 1 - private. */
|
|
HPI_FORMAT_OEM1 = 16,
|
|
/** OEM format 2 - private. */
|
|
HPI_FORMAT_OEM2 = 17,
|
|
/** Undefined format. */
|
|
HPI_FORMAT_UNDEFINED = 0xffff
|
|
};
|
|
|
|
/*******************************************/
|
|
/** Stream States
|
|
\ingroup stream
|
|
*/
|
|
enum HPI_STREAM_STATES {
|
|
/** State stopped - stream is stopped. */
|
|
HPI_STATE_STOPPED = 1,
|
|
/** State playing - stream is playing audio. */
|
|
HPI_STATE_PLAYING = 2,
|
|
/** State recording - stream is recording. */
|
|
HPI_STATE_RECORDING = 3,
|
|
/** State drained - playing stream ran out of data to play. */
|
|
HPI_STATE_DRAINED = 4,
|
|
/** State generate sine - to be implemented. */
|
|
HPI_STATE_SINEGEN = 5,
|
|
/** State wait - used for inter-card sync to mean waiting for all
|
|
cards to be ready. */
|
|
HPI_STATE_WAIT = 6
|
|
};
|
|
/*******************************************/
|
|
/** Source node types
|
|
\ingroup mixer
|
|
*/
|
|
enum HPI_SOURCENODES {
|
|
/** This define can be used instead of 0 to indicate
|
|
that there is no valid source node. A control that
|
|
exists on a destination node can be searched for using a source
|
|
node value of either 0, or HPI_SOURCENODE_NONE */
|
|
HPI_SOURCENODE_NONE = 100,
|
|
/** Out Stream (Play) node. */
|
|
HPI_SOURCENODE_OSTREAM = 101,
|
|
/** Line in node - could be analog, AES/EBU or network. */
|
|
HPI_SOURCENODE_LINEIN = 102,
|
|
HPI_SOURCENODE_AESEBU_IN = 103, /**< AES/EBU input node. */
|
|
HPI_SOURCENODE_TUNER = 104, /**< tuner node. */
|
|
HPI_SOURCENODE_RF = 105, /**< RF input node. */
|
|
HPI_SOURCENODE_CLOCK_SOURCE = 106, /**< clock source node. */
|
|
HPI_SOURCENODE_RAW_BITSTREAM = 107, /**< raw bitstream node. */
|
|
HPI_SOURCENODE_MICROPHONE = 108, /**< microphone node. */
|
|
/** Cobranet input node -
|
|
Audio samples come from the Cobranet network and into the device. */
|
|
HPI_SOURCENODE_COBRANET = 109,
|
|
HPI_SOURCENODE_ANALOG = 110, /**< analog input node. */
|
|
HPI_SOURCENODE_ADAPTER = 111, /**< adapter node. */
|
|
/** RTP stream input node - This node is a destination for
|
|
packets of RTP audio samples from other devices. */
|
|
HPI_SOURCENODE_RTP_DESTINATION = 112,
|
|
HPI_SOURCENODE_INTERNAL = 113, /**< node internal to the device. */
|
|
HPI_SOURCENODE_AVB = 114, /**< AVB input stream */
|
|
HPI_SOURCENODE_BLULINK = 115, /**< BLU-link input channel */
|
|
/* !!!Update this AND hpidebug.h if you add a new sourcenode type!!! */
|
|
HPI_SOURCENODE_LAST_INDEX = 115 /**< largest ID */
|
|
/* AX6 max sourcenode types = 15 */
|
|
};
|
|
|
|
/*******************************************/
|
|
/** Destination node types
|
|
\ingroup mixer
|
|
*/
|
|
enum HPI_DESTNODES {
|
|
/** This define can be used instead of 0 to indicate
|
|
that there is no valid destination node. A control that
|
|
exists on a source node can be searched for using a destination
|
|
node value of either 0, or HPI_DESTNODE_NONE */
|
|
HPI_DESTNODE_NONE = 200,
|
|
/** In Stream (Record) node. */
|
|
HPI_DESTNODE_ISTREAM = 201,
|
|
HPI_DESTNODE_LINEOUT = 202, /**< line out node. */
|
|
HPI_DESTNODE_AESEBU_OUT = 203, /**< AES/EBU output node. */
|
|
HPI_DESTNODE_RF = 204, /**< RF output node. */
|
|
HPI_DESTNODE_SPEAKER = 205, /**< speaker output node. */
|
|
/** Cobranet output node -
|
|
Audio samples from the device are sent out on the Cobranet network.*/
|
|
HPI_DESTNODE_COBRANET = 206,
|
|
HPI_DESTNODE_ANALOG = 207, /**< analog output node. */
|
|
/** RTP stream output node - This node is a source for
|
|
packets of RTP audio samples that are sent to other devices. */
|
|
HPI_DESTNODE_RTP_SOURCE = 208,
|
|
HPI_DESTNODE_AVB = 209, /**< AVB output stream */
|
|
HPI_DESTNODE_INTERNAL = 210, /**< node internal to the device. */
|
|
HPI_DESTNODE_BLULINK = 211, /**< BLU-link output channel. */
|
|
/* !!!Update this AND hpidebug.h if you add a new destnode type!!! */
|
|
HPI_DESTNODE_LAST_INDEX = 211 /**< largest ID */
|
|
/* AX6 max destnode types = 15 */
|
|
};
|
|
|
|
/*******************************************/
|
|
/** Mixer control types
|
|
\ingroup mixer
|
|
*/
|
|
enum HPI_CONTROLS {
|
|
HPI_CONTROL_GENERIC = 0, /**< generic control. */
|
|
HPI_CONTROL_CONNECTION = 1, /**< A connection between nodes. */
|
|
HPI_CONTROL_VOLUME = 2, /**< volume control - works in dB_fs. */
|
|
HPI_CONTROL_METER = 3, /**< peak meter control. */
|
|
HPI_CONTROL_MUTE = 4, /*mute control - not used at present. */
|
|
HPI_CONTROL_MULTIPLEXER = 5, /**< multiplexer control. */
|
|
|
|
HPI_CONTROL_AESEBU_TRANSMITTER = 6, /**< AES/EBU transmitter control */
|
|
HPI_CONTROL_AESEBUTX = 6, /* HPI_CONTROL_AESEBU_TRANSMITTER */
|
|
|
|
HPI_CONTROL_AESEBU_RECEIVER = 7, /**< AES/EBU receiver control. */
|
|
HPI_CONTROL_AESEBURX = 7, /* HPI_CONTROL_AESEBU_RECEIVER */
|
|
|
|
HPI_CONTROL_LEVEL = 8, /**< level/trim control - works in d_bu. */
|
|
HPI_CONTROL_TUNER = 9, /**< tuner control. */
|
|
/* HPI_CONTROL_ONOFFSWITCH = 10 */
|
|
HPI_CONTROL_VOX = 11, /**< vox control. */
|
|
/* HPI_CONTROL_AES18_TRANSMITTER = 12 */
|
|
/* HPI_CONTROL_AES18_RECEIVER = 13 */
|
|
/* HPI_CONTROL_AES18_BLOCKGENERATOR = 14 */
|
|
HPI_CONTROL_CHANNEL_MODE = 15, /**< channel mode control. */
|
|
|
|
HPI_CONTROL_BITSTREAM = 16, /**< bitstream control. */
|
|
HPI_CONTROL_SAMPLECLOCK = 17, /**< sample clock control. */
|
|
HPI_CONTROL_MICROPHONE = 18, /**< microphone control. */
|
|
HPI_CONTROL_PARAMETRIC_EQ = 19, /**< parametric EQ control. */
|
|
HPI_CONTROL_EQUALIZER = 19, /*HPI_CONTROL_PARAMETRIC_EQ */
|
|
|
|
HPI_CONTROL_COMPANDER = 20, /**< compander control. */
|
|
HPI_CONTROL_COBRANET = 21, /**< cobranet control. */
|
|
HPI_CONTROL_TONEDETECTOR = 22, /**< tone detector control. */
|
|
HPI_CONTROL_SILENCEDETECTOR = 23, /**< silence detector control. */
|
|
HPI_CONTROL_PAD = 24, /**< tuner PAD control. */
|
|
HPI_CONTROL_SRC = 25, /**< samplerate converter control. */
|
|
HPI_CONTROL_UNIVERSAL = 26, /**< universal control. */
|
|
|
|
/* !!! Update this AND hpidebug.h if you add a new control type!!!*/
|
|
HPI_CONTROL_LAST_INDEX = 26 /**<highest control type ID */
|
|
/* WARNING types 256 or greater impact bit packing in all AX6 DSP code */
|
|
};
|
|
|
|
/*******************************************/
|
|
/** Adapter properties
|
|
These are used in HPI_AdapterSetProperty() and HPI_AdapterGetProperty()
|
|
\ingroup adapter
|
|
*/
|
|
enum HPI_ADAPTER_PROPERTIES {
|
|
/** \internal Used in dwProperty field of HPI_AdapterSetProperty() and
|
|
HPI_AdapterGetProperty(). This errata applies to all ASI6000 cards with both
|
|
analog and digital outputs. The CS4224 A/D+D/A has a one sample delay between
|
|
left and right channels on both its input (ADC) and output (DAC).
|
|
More details are available in Cirrus Logic errata ER284B2.
|
|
PDF available from www.cirrus.com, released by Cirrus in 2001.
|
|
*/
|
|
HPI_ADAPTER_PROPERTY_ERRATA_1 = 1,
|
|
|
|
/** Adapter grouping property
|
|
Indicates whether the adapter supports the grouping API (for ASIO and SSX2)
|
|
*/
|
|
HPI_ADAPTER_PROPERTY_GROUPING = 2,
|
|
|
|
/** Driver SSX2 property
|
|
Tells the kernel driver to turn on SSX2 stream mapping.
|
|
This feature is not used by the DSP. In fact the call is completely processed
|
|
by the driver and is not passed on to the DSP at all.
|
|
*/
|
|
HPI_ADAPTER_PROPERTY_ENABLE_SSX2 = 3,
|
|
|
|
/** Adapter SSX2 property
|
|
Indicates the state of the adapter's SSX2 setting. This setting is stored in
|
|
non-volatile memory on the adapter. A typical call sequence would be to use
|
|
HPI_ADAPTER_PROPERTY_SSX2_SETTING to set SSX2 on the adapter and then to reload
|
|
the driver. The driver would query HPI_ADAPTER_PROPERTY_SSX2_SETTING during
|
|
startup and if SSX2 is set, it would then call HPI_ADAPTER_PROPERTY_ENABLE_SSX2
|
|
to enable SSX2 stream mapping within the kernel level of the driver.
|
|
*/
|
|
HPI_ADAPTER_PROPERTY_SSX2_SETTING = 4,
|
|
|
|
/** Enables/disables PCI(e) IRQ.
|
|
A setting of 0 indicates that no interrupts are being generated. A DSP boot
|
|
this property is set to 0. Setting to a non-zero value specifies the number
|
|
of frames of audio that should be processed between interrupts. This property
|
|
should be set to multiple of the mixer interval as read back from the
|
|
HPI_ADAPTER_PROPERTY_INTERVAL property.
|
|
*/
|
|
HPI_ADAPTER_PROPERTY_IRQ_RATE = 5,
|
|
|
|
/** Base number for readonly properties */
|
|
HPI_ADAPTER_PROPERTY_READONLYBASE = 256,
|
|
|
|
/** Readonly adapter latency property.
|
|
This property returns in the input and output latency in samples.
|
|
Property 1 is the estimated input latency
|
|
in samples, while Property 2 is that output latency in samples.
|
|
*/
|
|
HPI_ADAPTER_PROPERTY_LATENCY = 256,
|
|
|
|
/** Readonly adapter granularity property.
|
|
The granulariy is the smallest size chunk of stereo samples that is processed by
|
|
the adapter.
|
|
This property returns the record granularity in samples in Property 1.
|
|
Property 2 returns the play granularity.
|
|
*/
|
|
HPI_ADAPTER_PROPERTY_GRANULARITY = 257,
|
|
|
|
/** Readonly adapter number of current channels property.
|
|
Property 1 is the number of record channels per record device.
|
|
Property 2 is the number of play channels per playback device.*/
|
|
HPI_ADAPTER_PROPERTY_CURCHANNELS = 258,
|
|
|
|
/** Readonly adapter software version.
|
|
The SOFTWARE_VERSION property returns the version of the software running
|
|
on the adapter as Major.Minor.Release.
|
|
Property 1 contains Major in bits 15..8 and Minor in bits 7..0.
|
|
Property 2 contains Release in bits 7..0. */
|
|
HPI_ADAPTER_PROPERTY_SOFTWARE_VERSION = 259,
|
|
|
|
/** Readonly adapter MAC address MSBs.
|
|
The MAC_ADDRESS_MSB property returns
|
|
the most significant 32 bits of the MAC address.
|
|
Property 1 contains bits 47..32 of the MAC address.
|
|
Property 2 contains bits 31..16 of the MAC address. */
|
|
HPI_ADAPTER_PROPERTY_MAC_ADDRESS_MSB = 260,
|
|
|
|
/** Readonly adapter MAC address LSBs
|
|
The MAC_ADDRESS_LSB property returns
|
|
the least significant 16 bits of the MAC address.
|
|
Property 1 contains bits 15..0 of the MAC address. */
|
|
HPI_ADAPTER_PROPERTY_MAC_ADDRESS_LSB = 261,
|
|
|
|
/** Readonly extended adapter type number
|
|
The EXTENDED_ADAPTER_TYPE property returns the 4 digits of an extended
|
|
adapter type, i.e ASI8920-0022, 0022 is the extended type.
|
|
The digits are returned as ASCII characters rather than the hex digits that
|
|
are returned for the main type
|
|
Property 1 returns the 1st two (left most) digits, i.e "00"
|
|
in the example above, the upper byte being the left most digit.
|
|
Property 2 returns the 2nd two digits, i.e "22" in the example above*/
|
|
HPI_ADAPTER_PROPERTY_EXTENDED_ADAPTER_TYPE = 262,
|
|
|
|
/** Readonly debug log buffer information */
|
|
HPI_ADAPTER_PROPERTY_LOGTABLEN = 263,
|
|
HPI_ADAPTER_PROPERTY_LOGTABBEG = 264,
|
|
|
|
/** Readonly adapter IP address
|
|
For 192.168.1.101
|
|
Property 1 returns the 1st two (left most) digits, i.e 192*256 + 168
|
|
in the example above, the upper byte being the left most digit.
|
|
Property 2 returns the 2nd two digits, i.e 1*256 + 101 in the example above, */
|
|
HPI_ADAPTER_PROPERTY_IP_ADDRESS = 265,
|
|
|
|
/** Readonly adapter buffer processed count. Returns a buffer processed count
|
|
that is incremented every time all buffers for all streams are updated. This
|
|
is useful for checking completion of all stream operations across the adapter
|
|
when using grouped streams.
|
|
*/
|
|
HPI_ADAPTER_PROPERTY_BUFFER_UPDATE_COUNT = 266,
|
|
|
|
/** Readonly mixer and stream intervals
|
|
|
|
These intervals are measured in mixer frames.
|
|
To convert to time, divide by the adapter samplerate.
|
|
|
|
The mixer interval is the number of frames processed in one mixer iteration.
|
|
The stream update interval is the interval at which streams check for and
|
|
process data, and BBM host buffer counters are updated.
|
|
|
|
Property 1 is the mixer interval in mixer frames.
|
|
Property 2 is the stream update interval in mixer frames.
|
|
*/
|
|
HPI_ADAPTER_PROPERTY_INTERVAL = 267,
|
|
/** Adapter capabilities 1
|
|
Property 1 - adapter can do multichannel (SSX1)
|
|
Property 2 - adapter can do stream grouping (supports SSX2)
|
|
*/
|
|
HPI_ADAPTER_PROPERTY_CAPS1 = 268,
|
|
/** Adapter capabilities 2
|
|
Property 1 - adapter can do samplerate conversion (MRX)
|
|
Property 2 - adapter can do timestretch (TSX)
|
|
*/
|
|
HPI_ADAPTER_PROPERTY_CAPS2 = 269,
|
|
|
|
/** Readonly adapter sync header connection count.
|
|
*/
|
|
HPI_ADAPTER_PROPERTY_SYNC_HEADER_CONNECTIONS = 270,
|
|
/** Readonly supports SSX2 property.
|
|
Indicates the adapter supports SSX2 in some mode setting. The
|
|
return value is true (1) or false (0). If the current adapter
|
|
mode is MONO SSX2 is disabled, even though this property will
|
|
return true.
|
|
*/
|
|
HPI_ADAPTER_PROPERTY_SUPPORTS_SSX2 = 271,
|
|
/** Readonly supports PCI(e) IRQ.
|
|
Indicates that the adapter in it's current mode supports interrupts
|
|
across the host bus. Note, this does not imply that interrupts are
|
|
enabled. Instead it indicates that they can be enabled.
|
|
*/
|
|
HPI_ADAPTER_PROPERTY_SUPPORTS_IRQ = 272,
|
|
/** Readonly supports firmware updating.
|
|
Indicates that the adapter implements an interface to update firmware
|
|
on the adapter.
|
|
*/
|
|
HPI_ADAPTER_PROPERTY_SUPPORTS_FW_UPDATE = 273,
|
|
/** Readonly Firmware IDs
|
|
Identifiy firmware independent of individual adapter type.
|
|
May be used as a filter for firmware update images.
|
|
Property 1 = Bootloader ID
|
|
Property 2 = Main program ID
|
|
*/
|
|
HPI_ADAPTER_PROPERTY_FIRMWARE_ID = 274
|
|
};
|
|
|
|
/** Adapter mode commands
|
|
|
|
Used in wQueryOrSet parameter of HPI_AdapterSetModeEx().
|
|
\ingroup adapter
|
|
*/
|
|
enum HPI_ADAPTER_MODE_CMDS {
|
|
/** Set the mode to the given parameter */
|
|
HPI_ADAPTER_MODE_SET = 0,
|
|
/** Return 0 or error depending whether mode is valid,
|
|
but don't set the mode */
|
|
HPI_ADAPTER_MODE_QUERY = 1
|
|
};
|
|
|
|
/** Adapter Modes
|
|
These are used by HPI_AdapterSetModeEx()
|
|
|
|
\warning - more than 16 possible modes breaks
|
|
a bitmask in the Windows WAVE DLL
|
|
\ingroup adapter
|
|
*/
|
|
enum HPI_ADAPTER_MODES {
|
|
/** 4 outstream mode.
|
|
- ASI6114: 1 instream
|
|
- ASI6044: 4 instreams
|
|
- ASI6012: 1 instream
|
|
- ASI6102: no instreams
|
|
- ASI6022, ASI6122: 2 instreams
|
|
- ASI5111, ASI5101: 2 instreams
|
|
- ASI652x, ASI662x: 2 instreams
|
|
- ASI654x, ASI664x: 4 instreams
|
|
*/
|
|
HPI_ADAPTER_MODE_4OSTREAM = 1,
|
|
|
|
/** 6 outstream mode.
|
|
- ASI6012: 1 instream,
|
|
- ASI6022, ASI6122: 2 instreams
|
|
- ASI652x, ASI662x: 4 instreams
|
|
*/
|
|
HPI_ADAPTER_MODE_6OSTREAM = 2,
|
|
|
|
/** 8 outstream mode.
|
|
- ASI6114: 8 instreams
|
|
- ASI6118: 8 instreams
|
|
- ASI6585: 8 instreams
|
|
*/
|
|
HPI_ADAPTER_MODE_8OSTREAM = 3,
|
|
|
|
/** 16 outstream mode.
|
|
- ASI6416 16 instreams
|
|
- ASI6518, ASI6618 16 instreams
|
|
- ASI6118 16 mono out and in streams
|
|
*/
|
|
HPI_ADAPTER_MODE_16OSTREAM = 4,
|
|
|
|
/** one outstream mode.
|
|
- ASI5111 1 outstream, 1 instream
|
|
*/
|
|
HPI_ADAPTER_MODE_1OSTREAM = 5,
|
|
|
|
/** ASI504X mode 1. 12 outstream, 4 instream 0 to 48kHz sample rates
|
|
(see ASI504X datasheet for more info).
|
|
*/
|
|
HPI_ADAPTER_MODE_1 = 6,
|
|
|
|
/** ASI504X mode 2. 4 outstreams, 4 instreams at 0 to 192kHz sample rates
|
|
(see ASI504X datasheet for more info).
|
|
*/
|
|
HPI_ADAPTER_MODE_2 = 7,
|
|
|
|
/** ASI504X mode 3. 4 outstreams, 4 instreams at 0 to 192kHz sample rates
|
|
(see ASI504X datasheet for more info).
|
|
*/
|
|
HPI_ADAPTER_MODE_3 = 8,
|
|
|
|
/** ASI504X multichannel mode.
|
|
2 outstreams -> 4 line outs = 1 to 8 channel streams),
|
|
4 lineins -> 1 instream (1 to 8 channel streams) at 0-48kHz.
|
|
For more info see the SSX Specification.
|
|
*/
|
|
HPI_ADAPTER_MODE_MULTICHANNEL = 9,
|
|
|
|
/** 12 outstream mode.
|
|
- ASI6514, ASI6614: 2 instreams
|
|
- ASI6540,ASI6544: 8 instreams
|
|
- ASI6640,ASI6644: 8 instreams
|
|
*/
|
|
HPI_ADAPTER_MODE_12OSTREAM = 10,
|
|
|
|
/** 9 outstream mode.
|
|
- ASI6044: 8 instreams
|
|
*/
|
|
HPI_ADAPTER_MODE_9OSTREAM = 11,
|
|
|
|
/** mono mode.
|
|
- ASI6416: 16 outstreams/instreams
|
|
- ASI5402: 2 outstreams/instreams
|
|
*/
|
|
HPI_ADAPTER_MODE_MONO = 12,
|
|
|
|
/** Low latency mode.
|
|
- ASI6416/ASI6316: 1 16 channel outstream and instream
|
|
*/
|
|
HPI_ADAPTER_MODE_LOW_LATENCY = 13
|
|
};
|
|
|
|
/* Note, adapters can have more than one capability -
|
|
encoding as bitfield is recommended. */
|
|
#define HPI_CAPABILITY_NONE (0)
|
|
#define HPI_CAPABILITY_MPEG_LAYER3 (1)
|
|
|
|
/* Set this equal to maximum capability index,
|
|
Must not be greater than 32 - see axnvdef.h */
|
|
#define HPI_CAPABILITY_MAX 1
|
|
/* #define HPI_CAPABILITY_AAC 2 */
|
|
|
|
/******************************************* STREAM ATTRIBUTES ****/
|
|
|
|
/** MPEG Ancillary Data modes
|
|
|
|
The mode for the ancillary data insertion or extraction to operate in.
|
|
\ingroup stream
|
|
*/
|
|
enum HPI_MPEG_ANC_MODES {
|
|
/** the MPEG frames have energy information stored in them (5 bytes per stereo frame, 3 per mono) */
|
|
HPI_MPEG_ANC_HASENERGY = 0,
|
|
/** the entire ancillary data field is taken up by data from the Anc data buffer
|
|
On encode, the encoder will insert the energy bytes before filling the remainder
|
|
of the ancillary data space with data from the ancillary data buffer.
|
|
*/
|
|
HPI_MPEG_ANC_RAW = 1
|
|
};
|
|
|
|
/** Ancillary Data Alignment
|
|
\ingroup instream
|
|
*/
|
|
enum HPI_ISTREAM_MPEG_ANC_ALIGNS {
|
|
/** data is packed against the end of data, then padded to the end of frame */
|
|
HPI_MPEG_ANC_ALIGN_LEFT = 0,
|
|
/** data is packed against the end of the frame */
|
|
HPI_MPEG_ANC_ALIGN_RIGHT = 1
|
|
};
|
|
|
|
/** MPEG modes
|
|
MPEG modes - can be used optionally for HPI_FormatCreate()
|
|
parameter dwAttributes.
|
|
|
|
Using any mode setting other than HPI_MPEG_MODE_DEFAULT
|
|
with single channel format will return an error.
|
|
\ingroup stream
|
|
*/
|
|
enum HPI_MPEG_MODES {
|
|
/** Causes the MPEG-1 Layer II bitstream to be recorded
|
|
in single_channel mode when the number of channels is 1 and in stereo when the
|
|
number of channels is 2. */
|
|
HPI_MPEG_MODE_DEFAULT = 0,
|
|
/** Standard stereo without joint-stereo compression */
|
|
HPI_MPEG_MODE_STEREO = 1,
|
|
/** Joint stereo */
|
|
HPI_MPEG_MODE_JOINTSTEREO = 2,
|
|
/** Left and Right channels are completely independent */
|
|
HPI_MPEG_MODE_DUALCHANNEL = 3
|
|
};
|
|
/******************************************* MIXER ATTRIBUTES ****/
|
|
|
|
/* \defgroup mixer_flags Mixer flags for HPI_MIXER_GET_CONTROL_MULTIPLE_VALUES
|
|
{
|
|
*/
|
|
#define HPI_MIXER_GET_CONTROL_MULTIPLE_CHANGED (0)
|
|
#define HPI_MIXER_GET_CONTROL_MULTIPLE_RESET (1)
|
|
/*}*/
|
|
|
|
/** Commands used by HPI_MixerStore()
|
|
\ingroup mixer
|
|
*/
|
|
enum HPI_MIXER_STORE_COMMAND {
|
|
/** Save all mixer control settings. */
|
|
HPI_MIXER_STORE_SAVE = 1,
|
|
/** Restore all controls from saved. */
|
|
HPI_MIXER_STORE_RESTORE = 2,
|
|
/** Delete saved control settings. */
|
|
HPI_MIXER_STORE_DELETE = 3,
|
|
/** Enable auto storage of some control settings. */
|
|
HPI_MIXER_STORE_ENABLE = 4,
|
|
/** Disable auto storage of some control settings. */
|
|
HPI_MIXER_STORE_DISABLE = 5,
|
|
/** Unimplemented - save the attributes of a single control. */
|
|
HPI_MIXER_STORE_SAVE_SINGLE = 6
|
|
};
|
|
|
|
/****************************/
|
|
/* CONTROL ATTRIBUTE VALUES */
|
|
/****************************/
|
|
|
|
/** Used by mixer plugin enable functions
|
|
|
|
E.g. HPI_ParametricEq_SetState()
|
|
\ingroup mixer
|
|
*/
|
|
enum HPI_SWITCH_STATES {
|
|
HPI_SWITCH_OFF = 0, /**< turn the mixer plugin on. */
|
|
HPI_SWITCH_ON = 1 /**< turn the mixer plugin off. */
|
|
};
|
|
|
|
/* Volume control special gain values */
|
|
|
|
/** volumes units are 100ths of a dB
|
|
\ingroup volume
|
|
*/
|
|
#define HPI_UNITS_PER_dB 100
|
|
/** turns volume control OFF or MUTE
|
|
\ingroup volume
|
|
*/
|
|
#define HPI_GAIN_OFF (-100 * HPI_UNITS_PER_dB)
|
|
|
|
/** channel mask specifying all channels
|
|
\ingroup volume
|
|
*/
|
|
#define HPI_BITMASK_ALL_CHANNELS (0xFFFFFFFF)
|
|
|
|
/** value returned for no signal
|
|
\ingroup meter
|
|
*/
|
|
#define HPI_METER_MINIMUM (-150 * HPI_UNITS_PER_dB)
|
|
|
|
/** autofade profiles
|
|
\ingroup volume
|
|
*/
|
|
enum HPI_VOLUME_AUTOFADES {
|
|
/** log fade - dB attenuation changes linearly over time */
|
|
HPI_VOLUME_AUTOFADE_LOG = 2,
|
|
/** linear fade - amplitude changes linearly */
|
|
HPI_VOLUME_AUTOFADE_LINEAR = 3
|
|
};
|
|
|
|
/** The physical encoding format of the AESEBU I/O.
|
|
|
|
Used in HPI_Aesebu_Transmitter_SetFormat(), HPI_Aesebu_Receiver_SetFormat()
|
|
along with related Get and Query functions
|
|
\ingroup aestx
|
|
*/
|
|
enum HPI_AESEBU_FORMATS {
|
|
/** AES/EBU physical format - AES/EBU balanced "professional" */
|
|
HPI_AESEBU_FORMAT_AESEBU = 1,
|
|
/** AES/EBU physical format - S/PDIF unbalanced "consumer" */
|
|
HPI_AESEBU_FORMAT_SPDIF = 2
|
|
};
|
|
|
|
/** AES/EBU error status bits
|
|
|
|
Returned by HPI_Aesebu_Receiver_GetErrorStatus()
|
|
\ingroup aesrx
|
|
*/
|
|
enum HPI_AESEBU_ERRORS {
|
|
/** bit0: 1 when PLL is not locked */
|
|
HPI_AESEBU_ERROR_NOT_LOCKED = 0x01,
|
|
/** bit1: 1 when signal quality is poor */
|
|
HPI_AESEBU_ERROR_POOR_QUALITY = 0x02,
|
|
/** bit2: 1 when there is a parity error */
|
|
HPI_AESEBU_ERROR_PARITY_ERROR = 0x04,
|
|
/** bit3: 1 when there is a bi-phase coding violation */
|
|
HPI_AESEBU_ERROR_BIPHASE_VIOLATION = 0x08,
|
|
/** bit4: 1 when the validity bit is high */
|
|
HPI_AESEBU_ERROR_VALIDITY = 0x10,
|
|
/** bit5: 1 when the CRC error bit is high */
|
|
HPI_AESEBU_ERROR_CRC = 0x20
|
|
};
|
|
|
|
/** \addtogroup pad
|
|
\{
|
|
*/
|
|
/** The text string containing the station/channel combination. */
|
|
#define HPI_PAD_CHANNEL_NAME_LEN 16
|
|
/** The text string containing the artist. */
|
|
#define HPI_PAD_ARTIST_LEN 64
|
|
/** The text string containing the title. */
|
|
#define HPI_PAD_TITLE_LEN 64
|
|
/** The text string containing the comment. */
|
|
#define HPI_PAD_COMMENT_LEN 256
|
|
/** The PTY when the tuner has not received any PTY. */
|
|
#define HPI_PAD_PROGRAM_TYPE_INVALID 0xffff
|
|
/** \} */
|
|
|
|
/** Data types for PTY string translation.
|
|
\ingroup rds
|
|
*/
|
|
enum eHPI_RDS_type {
|
|
HPI_RDS_DATATYPE_RDS = 0, /**< RDS bitstream.*/
|
|
HPI_RDS_DATATYPE_RBDS = 1 /**< RBDS bitstream.*/
|
|
};
|
|
|
|
/** Tuner bands
|
|
|
|
Used for HPI_Tuner_SetBand(),HPI_Tuner_GetBand()
|
|
\ingroup tuner
|
|
*/
|
|
enum HPI_TUNER_BAND {
|
|
HPI_TUNER_BAND_AM = 1, /**< AM band */
|
|
HPI_TUNER_BAND_FM = 2, /**< FM band (mono) */
|
|
HPI_TUNER_BAND_TV_NTSC_M = 3, /**< NTSC-M TV band*/
|
|
HPI_TUNER_BAND_TV = 3, /* use TV_NTSC_M */
|
|
HPI_TUNER_BAND_FM_STEREO = 4, /**< FM band (stereo) */
|
|
HPI_TUNER_BAND_AUX = 5, /**< auxiliary input */
|
|
HPI_TUNER_BAND_TV_PAL_BG = 6, /**< PAL-B/G TV band*/
|
|
HPI_TUNER_BAND_TV_PAL_I = 7, /**< PAL-I TV band*/
|
|
HPI_TUNER_BAND_TV_PAL_DK = 8, /**< PAL-D/K TV band*/
|
|
HPI_TUNER_BAND_TV_SECAM_L = 9, /**< SECAM-L TV band*/
|
|
HPI_TUNER_BAND_DAB = 10,
|
|
HPI_TUNER_BAND_LAST = 10 /**< the index of the last tuner band. */
|
|
};
|
|
|
|
/** Tuner mode attributes
|
|
|
|
Used by HPI_Tuner_SetMode(), HPI_Tuner_GetMode()
|
|
\ingroup tuner
|
|
|
|
*/
|
|
enum HPI_TUNER_MODES {
|
|
HPI_TUNER_MODE_RSS = 1, /**< control RSS */
|
|
HPI_TUNER_MODE_RDS = 2 /**< control RBDS/RDS */
|
|
};
|
|
|
|
/** Tuner mode attribute values
|
|
|
|
Used by HPI_Tuner_SetMode(), HPI_Tuner_GetMode()
|
|
\ingroup tuner
|
|
*/
|
|
enum HPI_TUNER_MODE_VALUES {
|
|
/* RSS attribute values */
|
|
HPI_TUNER_MODE_RSS_DISABLE = 0, /**< RSS disable */
|
|
HPI_TUNER_MODE_RSS_ENABLE = 1, /**< RSS enable */
|
|
|
|
/* RDS mode attributes */
|
|
HPI_TUNER_MODE_RDS_DISABLE = 0, /**< RDS - disabled */
|
|
HPI_TUNER_MODE_RDS_RDS = 1, /**< RDS - RDS mode */
|
|
HPI_TUNER_MODE_RDS_RBDS = 2 /**< RDS - RBDS mode */
|
|
};
|
|
|
|
/** Tuner Status Bits
|
|
|
|
These bitfield values are returned by a call to HPI_Tuner_GetStatus().
|
|
Multiple fields are returned from a single call.
|
|
\ingroup tuner
|
|
*/
|
|
enum HPI_TUNER_STATUS_BITS {
|
|
HPI_TUNER_VIDEO_COLOR_PRESENT = 0x0001, /**< video color is present. */
|
|
HPI_TUNER_VIDEO_IS_60HZ = 0x0020, /**< 60 hz video detected. */
|
|
HPI_TUNER_VIDEO_HORZ_SYNC_MISSING = 0x0040, /**< video HSYNC is missing. */
|
|
HPI_TUNER_VIDEO_STATUS_VALID = 0x0100, /**< video status is valid. */
|
|
HPI_TUNER_DIGITAL = 0x0200, /**< tuner reports digital programming. */
|
|
HPI_TUNER_MULTIPROGRAM = 0x0400, /**< tuner reports multiple programs. */
|
|
HPI_TUNER_PLL_LOCKED = 0x1000, /**< the tuner's PLL is locked. */
|
|
HPI_TUNER_FM_STEREO = 0x2000 /**< tuner reports back FM stereo. */
|
|
};
|
|
|
|
/** Channel Modes
|
|
Used for HPI_ChannelModeSet/Get()
|
|
\ingroup channelmode
|
|
*/
|
|
enum HPI_CHANNEL_MODES {
|
|
/** Left channel out = left channel in, Right channel out = right channel in. */
|
|
HPI_CHANNEL_MODE_NORMAL = 1,
|
|
/** Left channel out = right channel in, Right channel out = left channel in. */
|
|
HPI_CHANNEL_MODE_SWAP = 2,
|
|
/** Left channel out = left channel in, Right channel out = left channel in. */
|
|
HPI_CHANNEL_MODE_LEFT_TO_STEREO = 3,
|
|
/** Left channel out = right channel in, Right channel out = right channel in.*/
|
|
HPI_CHANNEL_MODE_RIGHT_TO_STEREO = 4,
|
|
/** Left channel out = (left channel in + right channel in)/2,
|
|
Right channel out = mute. */
|
|
HPI_CHANNEL_MODE_STEREO_TO_LEFT = 5,
|
|
/** Left channel out = mute,
|
|
Right channel out = (right channel in + left channel in)/2. */
|
|
HPI_CHANNEL_MODE_STEREO_TO_RIGHT = 6,
|
|
HPI_CHANNEL_MODE_LAST = 6
|
|
};
|
|
|
|
/** SampleClock source values
|
|
\ingroup sampleclock
|
|
*/
|
|
enum HPI_SAMPLECLOCK_SOURCES {
|
|
/** The sampleclock output is derived from its local samplerate generator.
|
|
The local samplerate may be set using HPI_SampleClock_SetLocalRate(). */
|
|
HPI_SAMPLECLOCK_SOURCE_LOCAL = 1,
|
|
/** The adapter is clocked from a dedicated AES/EBU SampleClock input.*/
|
|
HPI_SAMPLECLOCK_SOURCE_AESEBU_SYNC = 2,
|
|
/** From external wordclock connector */
|
|
HPI_SAMPLECLOCK_SOURCE_WORD = 3,
|
|
/** Board-to-board header */
|
|
HPI_SAMPLECLOCK_SOURCE_WORD_HEADER = 4,
|
|
/** FUTURE - SMPTE clock. */
|
|
HPI_SAMPLECLOCK_SOURCE_SMPTE = 5,
|
|
/** One of the aesebu inputs */
|
|
HPI_SAMPLECLOCK_SOURCE_AESEBU_INPUT = 6,
|
|
/** From a network interface e.g. Cobranet or Livewire at either 48 or 96kHz */
|
|
HPI_SAMPLECLOCK_SOURCE_NETWORK = 8,
|
|
/** From previous adjacent module (ASI2416 only)*/
|
|
HPI_SAMPLECLOCK_SOURCE_PREV_MODULE = 10,
|
|
/** Blu link sample clock*/
|
|
HPI_SAMPLECLOCK_SOURCE_BLULINK = 11,
|
|
/*! Update this if you add a new clock source.*/
|
|
HPI_SAMPLECLOCK_SOURCE_LAST = 11
|
|
};
|
|
|
|
/** Equalizer filter types. Used by HPI_ParametricEq_SetBand()
|
|
\ingroup parmeq
|
|
*/
|
|
enum HPI_FILTER_TYPE {
|
|
HPI_FILTER_TYPE_BYPASS = 0, /**< filter is turned off */
|
|
|
|
HPI_FILTER_TYPE_LOWSHELF = 1, /**< EQ low shelf */
|
|
HPI_FILTER_TYPE_HIGHSHELF = 2, /**< EQ high shelf */
|
|
HPI_FILTER_TYPE_EQ_BAND = 3, /**< EQ gain */
|
|
|
|
HPI_FILTER_TYPE_LOWPASS = 4, /**< standard low pass */
|
|
HPI_FILTER_TYPE_HIGHPASS = 5, /**< standard high pass */
|
|
HPI_FILTER_TYPE_BANDPASS = 6, /**< standard band pass */
|
|
HPI_FILTER_TYPE_BANDSTOP = 7 /**< standard band stop/notch */
|
|
};
|
|
|
|
/** Async Event sources
|
|
\ingroup async
|
|
*/
|
|
enum ASYNC_EVENT_SOURCES {
|
|
HPI_ASYNC_EVENT_GPIO = 1, /**< GPIO event. */
|
|
HPI_ASYNC_EVENT_SILENCE = 2, /**< silence event detected. */
|
|
HPI_ASYNC_EVENT_TONE = 3 /**< tone event detected. */
|
|
};
|
|
/*******************************************/
|
|
/** HPI Error codes
|
|
|
|
Almost all HPI functions return an error code
|
|
A return value of zero means there was no error.
|
|
Otherwise one of these error codes is returned.
|
|
Error codes can be converted to a descriptive string using HPI_GetErrorText()
|
|
|
|
\note When a new error code is added HPI_GetErrorText() MUST be updated.
|
|
\note Codes 1-100 are reserved for driver use
|
|
\ingroup utility
|
|
*/
|
|
enum HPI_ERROR_CODES {
|
|
/** Message type does not exist. */
|
|
HPI_ERROR_INVALID_TYPE = 100,
|
|
/** Object type does not exist. */
|
|
HPI_ERROR_INVALID_OBJ = 101,
|
|
/** Function does not exist. */
|
|
HPI_ERROR_INVALID_FUNC = 102,
|
|
/** The specified object does not exist. */
|
|
HPI_ERROR_INVALID_OBJ_INDEX = 103,
|
|
/** Trying to access an object that has not been opened yet. */
|
|
HPI_ERROR_OBJ_NOT_OPEN = 104,
|
|
/** Trying to open an already open object. */
|
|
HPI_ERROR_OBJ_ALREADY_OPEN = 105,
|
|
/** PCI, ISA resource not valid. */
|
|
HPI_ERROR_INVALID_RESOURCE = 106,
|
|
/* HPI_ERROR_SUBSYSFINDADAPTERS_GETINFO= 107 */
|
|
/** Default response was never updated with actual error code. */
|
|
HPI_ERROR_INVALID_RESPONSE = 108,
|
|
/** wSize field of response was not updated,
|
|
indicating that the message was not processed. */
|
|
HPI_ERROR_PROCESSING_MESSAGE = 109,
|
|
/** The network did not respond in a timely manner. */
|
|
HPI_ERROR_NETWORK_TIMEOUT = 110,
|
|
/* An HPI handle is invalid (uninitialised?). */
|
|
HPI_ERROR_INVALID_HANDLE = 111,
|
|
/** A function or attribute has not been implemented yet. */
|
|
HPI_ERROR_UNIMPLEMENTED = 112,
|
|
/** There are too many clients attempting
|
|
to access a network resource. */
|
|
HPI_ERROR_NETWORK_TOO_MANY_CLIENTS = 113,
|
|
/** Response buffer passed to HPI_Message
|
|
was smaller than returned response.
|
|
wSpecificError field of hpi response contains the required size.
|
|
*/
|
|
HPI_ERROR_RESPONSE_BUFFER_TOO_SMALL = 114,
|
|
/** The returned response did not match the sent message */
|
|
HPI_ERROR_RESPONSE_MISMATCH = 115,
|
|
/** A control setting that should have been cached was not. */
|
|
HPI_ERROR_CONTROL_CACHING = 116,
|
|
/** A message buffer in the path to the adapter was smaller
|
|
than the message size.
|
|
wSpecificError field of hpi response contains the actual size.
|
|
*/
|
|
HPI_ERROR_MESSAGE_BUFFER_TOO_SMALL = 117,
|
|
|
|
/* HPI_ERROR_TOO_MANY_ADAPTERS= 200 */
|
|
/** Bad adpater. */
|
|
HPI_ERROR_BAD_ADAPTER = 201,
|
|
/** Adapter number out of range or not set properly. */
|
|
HPI_ERROR_BAD_ADAPTER_NUMBER = 202,
|
|
/** 2 adapters with the same adapter number. */
|
|
HPI_ERROR_DUPLICATE_ADAPTER_NUMBER = 203,
|
|
/** DSP code failed to bootload. Usually a DSP memory test failure. */
|
|
HPI_ERROR_DSP_BOOTLOAD = 204,
|
|
/** Couldn't find or open the DSP code file. */
|
|
HPI_ERROR_DSP_FILE_NOT_FOUND = 206,
|
|
/** Internal DSP hardware error. */
|
|
HPI_ERROR_DSP_HARDWARE = 207,
|
|
/** Could not allocate memory */
|
|
HPI_ERROR_MEMORY_ALLOC = 208,
|
|
/** Failed to correctly load/config PLD. (unused) */
|
|
HPI_ERROR_PLD_LOAD = 209,
|
|
/** Unexpected end of file, block length too big etc. */
|
|
HPI_ERROR_DSP_FILE_FORMAT = 210,
|
|
|
|
/** Found but could not open DSP code file. */
|
|
HPI_ERROR_DSP_FILE_ACCESS_DENIED = 211,
|
|
/** First DSP code section header not found in DSP file. */
|
|
HPI_ERROR_DSP_FILE_NO_HEADER = 212,
|
|
/* HPI_ERROR_DSP_FILE_READ_ERROR= 213, */
|
|
/** DSP code for adapter family not found. */
|
|
HPI_ERROR_DSP_SECTION_NOT_FOUND = 214,
|
|
/** Other OS specific error opening DSP file. */
|
|
HPI_ERROR_DSP_FILE_OTHER_ERROR = 215,
|
|
/** Sharing violation opening DSP code file. */
|
|
HPI_ERROR_DSP_FILE_SHARING_VIOLATION = 216,
|
|
/** DSP code section header had size == 0. */
|
|
HPI_ERROR_DSP_FILE_NULL_HEADER = 217,
|
|
|
|
/* HPI_ERROR_FLASH = 220, */
|
|
|
|
/** Flash has bad checksum */
|
|
HPI_ERROR_BAD_CHECKSUM = 221,
|
|
HPI_ERROR_BAD_SEQUENCE = 222,
|
|
HPI_ERROR_FLASH_ERASE = 223,
|
|
HPI_ERROR_FLASH_PROGRAM = 224,
|
|
HPI_ERROR_FLASH_VERIFY = 225,
|
|
HPI_ERROR_FLASH_TYPE = 226,
|
|
HPI_ERROR_FLASH_START = 227,
|
|
HPI_ERROR_FLASH_READ = 228,
|
|
HPI_ERROR_FLASH_READ_NO_FILE = 229,
|
|
HPI_ERROR_FLASH_SIZE = 230,
|
|
|
|
/** Reserved for OEMs. */
|
|
HPI_ERROR_RESERVED_1 = 290,
|
|
|
|
/* HPI_ERROR_INVALID_STREAM = 300 use HPI_ERROR_INVALID_OBJ_INDEX */
|
|
/** Invalid compression format. */
|
|
HPI_ERROR_INVALID_FORMAT = 301,
|
|
/** Invalid format samplerate */
|
|
HPI_ERROR_INVALID_SAMPLERATE = 302,
|
|
/** Invalid format number of channels. */
|
|
HPI_ERROR_INVALID_CHANNELS = 303,
|
|
/** Invalid format bitrate. */
|
|
HPI_ERROR_INVALID_BITRATE = 304,
|
|
/** Invalid datasize used for stream read/write. */
|
|
HPI_ERROR_INVALID_DATASIZE = 305,
|
|
/* HPI_ERROR_BUFFER_FULL = 306 use HPI_ERROR_INVALID_DATASIZE */
|
|
/* HPI_ERROR_BUFFER_EMPTY = 307 use HPI_ERROR_INVALID_DATASIZE */
|
|
/** Null data pointer used for stream read/write. */
|
|
HPI_ERROR_INVALID_DATA_POINTER = 308,
|
|
/** Packet ordering error for stream read/write. */
|
|
HPI_ERROR_INVALID_PACKET_ORDER = 309,
|
|
|
|
/** Object can't do requested operation in its current
|
|
state, eg set format, change rec mux state while recording.*/
|
|
HPI_ERROR_INVALID_OPERATION = 310,
|
|
|
|
/** Where a SRG is shared amongst streams, an incompatible samplerate
|
|
is one that is different to any currently active stream. */
|
|
HPI_ERROR_INCOMPATIBLE_SAMPLERATE = 311,
|
|
/** Adapter mode is illegal.*/
|
|
HPI_ERROR_BAD_ADAPTER_MODE = 312,
|
|
|
|
/** There have been too many attempts to set the adapter's
|
|
capabilities (using bad keys), the card should be returned
|
|
to ASI if further capabilities updates are required */
|
|
HPI_ERROR_TOO_MANY_CAPABILITY_CHANGE_ATTEMPTS = 313,
|
|
/** Streams on different adapters cannot be grouped. */
|
|
HPI_ERROR_NO_INTERADAPTER_GROUPS = 314,
|
|
/** Streams on different DSPs cannot be grouped. */
|
|
HPI_ERROR_NO_INTERDSP_GROUPS = 315,
|
|
/** Stream wait cancelled before threshold reached. */
|
|
HPI_ERROR_WAIT_CANCELLED = 316,
|
|
/** A character string is invalid. */
|
|
HPI_ERROR_INVALID_STRING = 317,
|
|
|
|
/** Invalid mixer node for this adapter. */
|
|
HPI_ERROR_INVALID_NODE = 400,
|
|
/** Invalid control. */
|
|
HPI_ERROR_INVALID_CONTROL = 401,
|
|
/** Invalid control value was passed. */
|
|
HPI_ERROR_INVALID_CONTROL_VALUE = 402,
|
|
/** Control attribute not supported by this control. */
|
|
HPI_ERROR_INVALID_CONTROL_ATTRIBUTE = 403,
|
|
/** Control is disabled. */
|
|
HPI_ERROR_CONTROL_DISABLED = 404,
|
|
/** I2C transaction failed due to a missing ACK. */
|
|
HPI_ERROR_CONTROL_I2C_MISSING_ACK = 405,
|
|
HPI_ERROR_I2C_MISSING_ACK = 405,
|
|
/** Control is busy, or coming out of
|
|
reset and cannot be accessed at this time. */
|
|
HPI_ERROR_CONTROL_NOT_READY = 407,
|
|
|
|
/** Non volatile memory */
|
|
HPI_ERROR_NVMEM_BUSY = 450,
|
|
HPI_ERROR_NVMEM_FULL = 451,
|
|
HPI_ERROR_NVMEM_FAIL = 452,
|
|
|
|
/** I2C */
|
|
HPI_ERROR_I2C_BAD_ADR = 460,
|
|
|
|
/** Entity type did not match requested type */
|
|
HPI_ERROR_ENTITY_TYPE_MISMATCH = 470,
|
|
/** Entity item count did not match requested count */
|
|
HPI_ERROR_ENTITY_ITEM_COUNT = 471,
|
|
/** Entity type is not one of the valid types */
|
|
HPI_ERROR_ENTITY_TYPE_INVALID = 472,
|
|
/** Entity role is not one of the valid roles */
|
|
HPI_ERROR_ENTITY_ROLE_INVALID = 473,
|
|
/** Entity size doesn't match target size */
|
|
HPI_ERROR_ENTITY_SIZE_MISMATCH = 474,
|
|
|
|
/* AES18 specific errors were 500..507 */
|
|
|
|
/** custom error to use for debugging */
|
|
HPI_ERROR_CUSTOM = 600,
|
|
|
|
/** hpioct32.c can't obtain mutex */
|
|
HPI_ERROR_MUTEX_TIMEOUT = 700,
|
|
|
|
/** Backend errors used to be greater than this.
|
|
\deprecated Now, all backends return only errors defined here in hpi.h
|
|
*/
|
|
HPI_ERROR_BACKEND_BASE = 900,
|
|
|
|
/** Communication with DSP failed */
|
|
HPI_ERROR_DSP_COMMUNICATION = 900
|
|
/* Note that the dsp communication error is set to this value so that
|
|
it remains compatible with any software that expects such errors
|
|
to be backend errors i.e. >= 900.
|
|
Do not define any new error codes with values > 900.
|
|
*/
|
|
};
|
|
|
|
/** \defgroup maximums HPI maximum values
|
|
\{
|
|
*/
|
|
/** Maximum number of PCI HPI adapters */
|
|
#define HPI_MAX_ADAPTERS 20
|
|
/** Maximum number of in or out streams per adapter */
|
|
#define HPI_MAX_STREAMS 16
|
|
#define HPI_MAX_CHANNELS 2 /* per stream */
|
|
#define HPI_MAX_NODES 8 /* per mixer ? */
|
|
#define HPI_MAX_CONTROLS 4 /* per node ? */
|
|
/** maximum number of ancillary bytes per MPEG frame */
|
|
#define HPI_MAX_ANC_BYTES_PER_FRAME (64)
|
|
#define HPI_STRING_LEN 16
|
|
|
|
/** Networked adapters have index >= 100 */
|
|
#define HPI_MIN_NETWORK_ADAPTER_IDX 100
|
|
|
|
/** Velocity units */
|
|
#define HPI_OSTREAM_VELOCITY_UNITS 4096
|
|
/** OutStream timescale units */
|
|
#define HPI_OSTREAM_TIMESCALE_UNITS 10000
|
|
/** OutStream timescale passthrough - turns timescaling on in passthough mode */
|
|
#define HPI_OSTREAM_TIMESCALE_PASSTHROUGH 99999
|
|
|
|
/**\}*/
|
|
|
|
/**************/
|
|
/* STRUCTURES */
|
|
#ifndef DISABLE_PRAGMA_PACK1
|
|
#pragma pack(push, 1)
|
|
#endif
|
|
|
|
/** Structure containing sample format information.
|
|
See also HPI_FormatCreate().
|
|
*/
|
|
struct hpi_format {
|
|
u32 sample_rate;
|
|
/**< 11025, 32000, 44100 ... */
|
|
u32 bit_rate; /**< for MPEG */
|
|
u32 attributes;
|
|
/**< Stereo/JointStereo/Mono */
|
|
u16 mode_legacy;
|
|
/**< Legacy ancillary mode or idle bit */
|
|
u16 unused; /**< Unused */
|
|
u16 channels; /**< 1,2..., (or ancillary mode or idle bit */
|
|
u16 format; /**< HPI_FORMAT_PCM16, _MPEG etc. see #HPI_FORMATS. */
|
|
};
|
|
|
|
struct hpi_anc_frame {
|
|
u32 valid_bits_in_this_frame;
|
|
u8 b_data[HPI_MAX_ANC_BYTES_PER_FRAME];
|
|
};
|
|
|
|
/** An object for containing a single async event.
|
|
*/
|
|
struct hpi_async_event {
|
|
u16 event_type; /**< type of event. \sa async_event */
|
|
u16 sequence; /**< Sequence number, allows lost event detection */
|
|
u32 state; /**< New state */
|
|
u32 h_object; /**< handle to the object returning the event. */
|
|
union {
|
|
struct {
|
|
u16 index; /**< GPIO bit index. */
|
|
} gpio;
|
|
struct {
|
|
u16 node_index; /**< what node is the control on ? */
|
|
u16 node_type; /**< what type of node is the control on ? */
|
|
} control;
|
|
} u;
|
|
};
|
|
|
|
#ifndef DISABLE_PRAGMA_PACK1
|
|
#pragma pack(pop)
|
|
#endif
|
|
|
|
/*****************/
|
|
/* HPI FUNCTIONS */
|
|
/*****************/
|
|
|
|
/* Stream */
|
|
u16 hpi_stream_estimate_buffer_size(struct hpi_format *pF,
|
|
u32 host_polling_rate_in_milli_seconds, u32 *recommended_buffer_size);
|
|
|
|
/*************/
|
|
/* SubSystem */
|
|
/*************/
|
|
|
|
u16 hpi_subsys_get_version_ex(u32 *pversion_ex);
|
|
|
|
u16 hpi_subsys_get_num_adapters(int *pn_num_adapters);
|
|
|
|
u16 hpi_subsys_get_adapter(int iterator, u32 *padapter_index,
|
|
u16 *pw_adapter_type);
|
|
|
|
/***********/
|
|
/* Adapter */
|
|
/***********/
|
|
|
|
u16 hpi_adapter_open(u16 adapter_index);
|
|
|
|
u16 hpi_adapter_close(u16 adapter_index);
|
|
|
|
u16 hpi_adapter_get_info(u16 adapter_index, u16 *pw_num_outstreams,
|
|
u16 *pw_num_instreams, u16 *pw_version, u32 *pserial_number,
|
|
u16 *pw_adapter_type);
|
|
|
|
u16 hpi_adapter_get_module_by_index(u16 adapter_index, u16 module_index,
|
|
u16 *pw_num_outputs, u16 *pw_num_inputs, u16 *pw_version,
|
|
u32 *pserial_number, u16 *pw_module_type, u32 *ph_module);
|
|
|
|
u16 hpi_adapter_set_mode(u16 adapter_index, u32 adapter_mode);
|
|
|
|
u16 hpi_adapter_set_mode_ex(u16 adapter_index, u32 adapter_mode,
|
|
u16 query_or_set);
|
|
|
|
u16 hpi_adapter_get_mode(u16 adapter_index, u32 *padapter_mode);
|
|
|
|
u16 hpi_adapter_get_assert2(u16 adapter_index, u16 *p_assert_count,
|
|
char *psz_assert, u32 *p_param1, u32 *p_param2,
|
|
u32 *p_dsp_string_addr, u16 *p_processor_id);
|
|
|
|
u16 hpi_adapter_test_assert(u16 adapter_index, u16 assert_id);
|
|
|
|
u16 hpi_adapter_enable_capability(u16 adapter_index, u16 capability, u32 key);
|
|
|
|
u16 hpi_adapter_self_test(u16 adapter_index);
|
|
|
|
u16 hpi_adapter_debug_read(u16 adapter_index, u32 dsp_address, char *p_bytes,
|
|
int *count_bytes);
|
|
|
|
u16 hpi_adapter_set_property(u16 adapter_index, u16 property, u16 paramter1,
|
|
u16 paramter2);
|
|
|
|
u16 hpi_adapter_get_property(u16 adapter_index, u16 property,
|
|
u16 *pw_paramter1, u16 *pw_paramter2);
|
|
|
|
u16 hpi_adapter_enumerate_property(u16 adapter_index, u16 index,
|
|
u16 what_to_enumerate, u16 property_index, u32 *psetting);
|
|
/*************/
|
|
/* OutStream */
|
|
/*************/
|
|
u16 hpi_outstream_open(u16 adapter_index, u16 outstream_index,
|
|
u32 *ph_outstream);
|
|
|
|
u16 hpi_outstream_close(u32 h_outstream);
|
|
|
|
u16 hpi_outstream_get_info_ex(u32 h_outstream, u16 *pw_state,
|
|
u32 *pbuffer_size, u32 *pdata_to_play, u32 *psamples_played,
|
|
u32 *pauxiliary_data_to_play);
|
|
|
|
u16 hpi_outstream_write_buf(u32 h_outstream, const u8 *pb_write_buf,
|
|
u32 bytes_to_write, const struct hpi_format *p_format);
|
|
|
|
u16 hpi_outstream_start(u32 h_outstream);
|
|
|
|
u16 hpi_outstream_wait_start(u32 h_outstream);
|
|
|
|
u16 hpi_outstream_stop(u32 h_outstream);
|
|
|
|
u16 hpi_outstream_sinegen(u32 h_outstream);
|
|
|
|
u16 hpi_outstream_reset(u32 h_outstream);
|
|
|
|
u16 hpi_outstream_query_format(u32 h_outstream, struct hpi_format *p_format);
|
|
|
|
u16 hpi_outstream_set_format(u32 h_outstream, struct hpi_format *p_format);
|
|
|
|
u16 hpi_outstream_set_punch_in_out(u32 h_outstream, u32 punch_in_sample,
|
|
u32 punch_out_sample);
|
|
|
|
u16 hpi_outstream_set_velocity(u32 h_outstream, short velocity);
|
|
|
|
u16 hpi_outstream_ancillary_reset(u32 h_outstream, u16 mode);
|
|
|
|
u16 hpi_outstream_ancillary_get_info(u32 h_outstream, u32 *pframes_available);
|
|
|
|
u16 hpi_outstream_ancillary_read(u32 h_outstream,
|
|
struct hpi_anc_frame *p_anc_frame_buffer,
|
|
u32 anc_frame_buffer_size_in_bytes,
|
|
u32 number_of_ancillary_frames_to_read);
|
|
|
|
u16 hpi_outstream_set_time_scale(u32 h_outstream, u32 time_scaleX10000);
|
|
|
|
u16 hpi_outstream_host_buffer_allocate(u32 h_outstream, u32 size_in_bytes);
|
|
|
|
u16 hpi_outstream_host_buffer_free(u32 h_outstream);
|
|
|
|
u16 hpi_outstream_group_add(u32 h_outstream, u32 h_stream);
|
|
|
|
u16 hpi_outstream_group_get_map(u32 h_outstream, u32 *poutstream_map,
|
|
u32 *pinstream_map);
|
|
|
|
u16 hpi_outstream_group_reset(u32 h_outstream);
|
|
|
|
/************/
|
|
/* InStream */
|
|
/************/
|
|
u16 hpi_instream_open(u16 adapter_index, u16 instream_index,
|
|
u32 *ph_instream);
|
|
|
|
u16 hpi_instream_close(u32 h_instream);
|
|
|
|
u16 hpi_instream_query_format(u32 h_instream,
|
|
const struct hpi_format *p_format);
|
|
|
|
u16 hpi_instream_set_format(u32 h_instream,
|
|
const struct hpi_format *p_format);
|
|
|
|
u16 hpi_instream_read_buf(u32 h_instream, u8 *pb_read_buf, u32 bytes_to_read);
|
|
|
|
u16 hpi_instream_start(u32 h_instream);
|
|
|
|
u16 hpi_instream_wait_start(u32 h_instream);
|
|
|
|
u16 hpi_instream_stop(u32 h_instream);
|
|
|
|
u16 hpi_instream_reset(u32 h_instream);
|
|
|
|
u16 hpi_instream_get_info_ex(u32 h_instream, u16 *pw_state, u32 *pbuffer_size,
|
|
u32 *pdata_recorded, u32 *psamples_recorded,
|
|
u32 *pauxiliary_data_recorded);
|
|
|
|
u16 hpi_instream_ancillary_reset(u32 h_instream, u16 bytes_per_frame,
|
|
u16 mode, u16 alignment, u16 idle_bit);
|
|
|
|
u16 hpi_instream_ancillary_get_info(u32 h_instream, u32 *pframe_space);
|
|
|
|
u16 hpi_instream_ancillary_write(u32 h_instream,
|
|
const struct hpi_anc_frame *p_anc_frame_buffer,
|
|
u32 anc_frame_buffer_size_in_bytes,
|
|
u32 number_of_ancillary_frames_to_write);
|
|
|
|
u16 hpi_instream_host_buffer_allocate(u32 h_instream, u32 size_in_bytes);
|
|
|
|
u16 hpi_instream_host_buffer_free(u32 h_instream);
|
|
|
|
u16 hpi_instream_group_add(u32 h_instream, u32 h_stream);
|
|
|
|
u16 hpi_instream_group_get_map(u32 h_instream, u32 *poutstream_map,
|
|
u32 *pinstream_map);
|
|
|
|
u16 hpi_instream_group_reset(u32 h_instream);
|
|
|
|
/*********/
|
|
/* Mixer */
|
|
/*********/
|
|
u16 hpi_mixer_open(u16 adapter_index, u32 *ph_mixer);
|
|
|
|
u16 hpi_mixer_close(u32 h_mixer);
|
|
|
|
u16 hpi_mixer_get_control(u32 h_mixer, u16 src_node_type,
|
|
u16 src_node_type_index, u16 dst_node_type, u16 dst_node_type_index,
|
|
u16 control_type, u32 *ph_control);
|
|
|
|
u16 hpi_mixer_get_control_by_index(u32 h_mixer, u16 control_index,
|
|
u16 *pw_src_node_type, u16 *pw_src_node_index, u16 *pw_dst_node_type,
|
|
u16 *pw_dst_node_index, u16 *pw_control_type, u32 *ph_control);
|
|
|
|
u16 hpi_mixer_store(u32 h_mixer, enum HPI_MIXER_STORE_COMMAND command,
|
|
u16 index);
|
|
/************/
|
|
/* Controls */
|
|
/************/
|
|
/******************/
|
|
/* Volume control */
|
|
/******************/
|
|
u16 hpi_volume_set_gain(u32 h_control, short an_gain0_01dB[HPI_MAX_CHANNELS]
|
|
);
|
|
|
|
u16 hpi_volume_get_gain(u32 h_control,
|
|
short an_gain0_01dB_out[HPI_MAX_CHANNELS]
|
|
);
|
|
|
|
u16 hpi_volume_set_mute(u32 h_control, u32 mute);
|
|
|
|
u16 hpi_volume_get_mute(u32 h_control, u32 *mute);
|
|
|
|
#define hpi_volume_get_range hpi_volume_query_range
|
|
u16 hpi_volume_query_range(u32 h_control, short *min_gain_01dB,
|
|
short *max_gain_01dB, short *step_gain_01dB);
|
|
|
|
u16 hpi_volume_query_channels(const u32 h_control, u32 *p_channels);
|
|
|
|
u16 hpi_volume_auto_fade(u32 h_control,
|
|
short an_stop_gain0_01dB[HPI_MAX_CHANNELS], u32 duration_ms);
|
|
|
|
u16 hpi_volume_auto_fade_profile(u32 h_control,
|
|
short an_stop_gain0_01dB[HPI_MAX_CHANNELS], u32 duration_ms,
|
|
u16 profile);
|
|
|
|
u16 hpi_volume_query_auto_fade_profile(const u32 h_control, const u32 i,
|
|
u16 *profile);
|
|
|
|
/*****************/
|
|
/* Level control */
|
|
/*****************/
|
|
u16 hpi_level_query_range(u32 h_control, short *min_gain_01dB,
|
|
short *max_gain_01dB, short *step_gain_01dB);
|
|
|
|
u16 hpi_level_set_gain(u32 h_control, short an_gain0_01dB[HPI_MAX_CHANNELS]
|
|
);
|
|
|
|
u16 hpi_level_get_gain(u32 h_control,
|
|
short an_gain0_01dB_out[HPI_MAX_CHANNELS]
|
|
);
|
|
|
|
/*****************/
|
|
/* Meter control */
|
|
/*****************/
|
|
u16 hpi_meter_query_channels(const u32 h_meter, u32 *p_channels);
|
|
|
|
u16 hpi_meter_get_peak(u32 h_control,
|
|
short an_peak0_01dB_out[HPI_MAX_CHANNELS]
|
|
);
|
|
|
|
u16 hpi_meter_get_rms(u32 h_control, short an_peak0_01dB_out[HPI_MAX_CHANNELS]
|
|
);
|
|
|
|
u16 hpi_meter_set_peak_ballistics(u32 h_control, u16 attack, u16 decay);
|
|
|
|
u16 hpi_meter_set_rms_ballistics(u32 h_control, u16 attack, u16 decay);
|
|
|
|
u16 hpi_meter_get_peak_ballistics(u32 h_control, u16 *attack, u16 *decay);
|
|
|
|
u16 hpi_meter_get_rms_ballistics(u32 h_control, u16 *attack, u16 *decay);
|
|
|
|
/************************/
|
|
/* ChannelMode control */
|
|
/************************/
|
|
u16 hpi_channel_mode_query_mode(const u32 h_mode, const u32 index,
|
|
u16 *pw_mode);
|
|
|
|
u16 hpi_channel_mode_set(u32 h_control, u16 mode);
|
|
|
|
u16 hpi_channel_mode_get(u32 h_control, u16 *mode);
|
|
|
|
/*****************/
|
|
/* Tuner control */
|
|
/*****************/
|
|
u16 hpi_tuner_query_band(const u32 h_tuner, const u32 index, u16 *pw_band);
|
|
|
|
u16 hpi_tuner_set_band(u32 h_control, u16 band);
|
|
|
|
u16 hpi_tuner_get_band(u32 h_control, u16 *pw_band);
|
|
|
|
u16 hpi_tuner_query_frequency(const u32 h_tuner, const u32 index,
|
|
const u16 band, u32 *pfreq);
|
|
|
|
u16 hpi_tuner_set_frequency(u32 h_control, u32 freq_ink_hz);
|
|
|
|
u16 hpi_tuner_get_frequency(u32 h_control, u32 *pw_freq_ink_hz);
|
|
|
|
u16 hpi_tuner_get_rf_level(u32 h_control, short *pw_level);
|
|
|
|
u16 hpi_tuner_get_raw_rf_level(u32 h_control, short *pw_level);
|
|
|
|
u16 hpi_tuner_query_gain(const u32 h_tuner, const u32 index, u16 *pw_gain);
|
|
|
|
u16 hpi_tuner_set_gain(u32 h_control, short gain);
|
|
|
|
u16 hpi_tuner_get_gain(u32 h_control, short *pn_gain);
|
|
|
|
u16 hpi_tuner_get_status(u32 h_control, u16 *pw_status_mask, u16 *pw_status);
|
|
|
|
u16 hpi_tuner_set_mode(u32 h_control, u32 mode, u32 value);
|
|
|
|
u16 hpi_tuner_get_mode(u32 h_control, u32 mode, u32 *pn_value);
|
|
|
|
u16 hpi_tuner_get_rds(u32 h_control, char *p_rds_data);
|
|
|
|
u16 hpi_tuner_query_deemphasis(const u32 h_tuner, const u32 index,
|
|
const u16 band, u32 *pdeemphasis);
|
|
|
|
u16 hpi_tuner_set_deemphasis(u32 h_control, u32 deemphasis);
|
|
u16 hpi_tuner_get_deemphasis(u32 h_control, u32 *pdeemphasis);
|
|
|
|
u16 hpi_tuner_query_program(const u32 h_tuner, u32 *pbitmap_program);
|
|
|
|
u16 hpi_tuner_set_program(u32 h_control, u32 program);
|
|
|
|
u16 hpi_tuner_get_program(u32 h_control, u32 *pprogram);
|
|
|
|
u16 hpi_tuner_get_hd_radio_dsp_version(u32 h_control, char *psz_dsp_version,
|
|
const u32 string_size);
|
|
|
|
u16 hpi_tuner_get_hd_radio_sdk_version(u32 h_control, char *psz_sdk_version,
|
|
const u32 string_size);
|
|
|
|
u16 hpi_tuner_get_hd_radio_signal_quality(u32 h_control, u32 *pquality);
|
|
|
|
u16 hpi_tuner_get_hd_radio_signal_blend(u32 h_control, u32 *pblend);
|
|
|
|
u16 hpi_tuner_set_hd_radio_signal_blend(u32 h_control, const u32 blend);
|
|
|
|
/***************/
|
|
/* PAD control */
|
|
/***************/
|
|
|
|
u16 hpi_pad_get_channel_name(u32 h_control, char *psz_string,
|
|
const u32 string_length);
|
|
|
|
u16 hpi_pad_get_artist(u32 h_control, char *psz_string,
|
|
const u32 string_length);
|
|
|
|
u16 hpi_pad_get_title(u32 h_control, char *psz_string,
|
|
const u32 string_length);
|
|
|
|
u16 hpi_pad_get_comment(u32 h_control, char *psz_string,
|
|
const u32 string_length);
|
|
|
|
u16 hpi_pad_get_program_type(u32 h_control, u32 *ppTY);
|
|
|
|
u16 hpi_pad_get_rdsPI(u32 h_control, u32 *ppI);
|
|
|
|
u16 hpi_pad_get_program_type_string(u32 h_control, const u32 data_type,
|
|
const u32 pTY, char *psz_string, const u32 string_length);
|
|
|
|
/****************************/
|
|
/* AES/EBU Receiver control */
|
|
/****************************/
|
|
u16 hpi_aesebu_receiver_query_format(const u32 h_aes_rx, const u32 index,
|
|
u16 *pw_format);
|
|
|
|
u16 hpi_aesebu_receiver_set_format(u32 h_control, u16 source);
|
|
|
|
u16 hpi_aesebu_receiver_get_format(u32 h_control, u16 *pw_source);
|
|
|
|
u16 hpi_aesebu_receiver_get_sample_rate(u32 h_control, u32 *psample_rate);
|
|
|
|
u16 hpi_aesebu_receiver_get_user_data(u32 h_control, u16 index, u16 *pw_data);
|
|
|
|
u16 hpi_aesebu_receiver_get_channel_status(u32 h_control, u16 index,
|
|
u16 *pw_data);
|
|
|
|
u16 hpi_aesebu_receiver_get_error_status(u32 h_control, u16 *pw_error_data);
|
|
|
|
/*******************************/
|
|
/* AES/EBU Transmitter control */
|
|
/*******************************/
|
|
u16 hpi_aesebu_transmitter_set_sample_rate(u32 h_control, u32 sample_rate);
|
|
|
|
u16 hpi_aesebu_transmitter_set_user_data(u32 h_control, u16 index, u16 data);
|
|
|
|
u16 hpi_aesebu_transmitter_set_channel_status(u32 h_control, u16 index,
|
|
u16 data);
|
|
|
|
u16 hpi_aesebu_transmitter_get_channel_status(u32 h_control, u16 index,
|
|
u16 *pw_data);
|
|
|
|
u16 hpi_aesebu_transmitter_query_format(const u32 h_aes_tx, const u32 index,
|
|
u16 *pw_format);
|
|
|
|
u16 hpi_aesebu_transmitter_set_format(u32 h_control, u16 output_format);
|
|
|
|
u16 hpi_aesebu_transmitter_get_format(u32 h_control, u16 *pw_output_format);
|
|
|
|
/***********************/
|
|
/* Multiplexer control */
|
|
/***********************/
|
|
u16 hpi_multiplexer_set_source(u32 h_control, u16 source_node_type,
|
|
u16 source_node_index);
|
|
|
|
u16 hpi_multiplexer_get_source(u32 h_control, u16 *source_node_type,
|
|
u16 *source_node_index);
|
|
|
|
u16 hpi_multiplexer_query_source(u32 h_control, u16 index,
|
|
u16 *source_node_type, u16 *source_node_index);
|
|
|
|
/***************/
|
|
/* Vox control */
|
|
/***************/
|
|
u16 hpi_vox_set_threshold(u32 h_control, short an_gain0_01dB);
|
|
|
|
u16 hpi_vox_get_threshold(u32 h_control, short *an_gain0_01dB);
|
|
|
|
/*********************/
|
|
/* Bitstream control */
|
|
/*********************/
|
|
u16 hpi_bitstream_set_clock_edge(u32 h_control, u16 edge_type);
|
|
|
|
u16 hpi_bitstream_set_data_polarity(u32 h_control, u16 polarity);
|
|
|
|
u16 hpi_bitstream_get_activity(u32 h_control, u16 *pw_clk_activity,
|
|
u16 *pw_data_activity);
|
|
|
|
/***********************/
|
|
/* SampleClock control */
|
|
/***********************/
|
|
|
|
u16 hpi_sample_clock_query_source(const u32 h_clock, const u32 index,
|
|
u16 *pw_source);
|
|
|
|
u16 hpi_sample_clock_set_source(u32 h_control, u16 source);
|
|
|
|
u16 hpi_sample_clock_get_source(u32 h_control, u16 *pw_source);
|
|
|
|
u16 hpi_sample_clock_query_source_index(const u32 h_clock, const u32 index,
|
|
const u32 source, u16 *pw_source_index);
|
|
|
|
u16 hpi_sample_clock_set_source_index(u32 h_control, u16 source_index);
|
|
|
|
u16 hpi_sample_clock_get_source_index(u32 h_control, u16 *pw_source_index);
|
|
|
|
u16 hpi_sample_clock_get_sample_rate(u32 h_control, u32 *psample_rate);
|
|
|
|
u16 hpi_sample_clock_query_local_rate(const u32 h_clock, const u32 index,
|
|
u32 *psource);
|
|
|
|
u16 hpi_sample_clock_set_local_rate(u32 h_control, u32 sample_rate);
|
|
|
|
u16 hpi_sample_clock_get_local_rate(u32 h_control, u32 *psample_rate);
|
|
|
|
u16 hpi_sample_clock_set_auto(u32 h_control, u32 enable);
|
|
|
|
u16 hpi_sample_clock_get_auto(u32 h_control, u32 *penable);
|
|
|
|
u16 hpi_sample_clock_set_local_rate_lock(u32 h_control, u32 lock);
|
|
|
|
u16 hpi_sample_clock_get_local_rate_lock(u32 h_control, u32 *plock);
|
|
|
|
/***********************/
|
|
/* Microphone control */
|
|
/***********************/
|
|
u16 hpi_microphone_set_phantom_power(u32 h_control, u16 on_off);
|
|
|
|
u16 hpi_microphone_get_phantom_power(u32 h_control, u16 *pw_on_off);
|
|
|
|
/********************************/
|
|
/* Parametric Equalizer control */
|
|
/********************************/
|
|
u16 hpi_parametric_eq_get_info(u32 h_control, u16 *pw_number_of_bands,
|
|
u16 *pw_enabled);
|
|
|
|
u16 hpi_parametric_eq_set_state(u32 h_control, u16 on_off);
|
|
|
|
u16 hpi_parametric_eq_set_band(u32 h_control, u16 index, u16 type,
|
|
u32 frequency_hz, short q100, short gain0_01dB);
|
|
|
|
u16 hpi_parametric_eq_get_band(u32 h_control, u16 index, u16 *pn_type,
|
|
u32 *pfrequency_hz, short *pnQ100, short *pn_gain0_01dB);
|
|
|
|
u16 hpi_parametric_eq_get_coeffs(u32 h_control, u16 index, short coeffs[5]
|
|
);
|
|
|
|
/*******************************/
|
|
/* Compressor Expander control */
|
|
/*******************************/
|
|
|
|
u16 hpi_compander_set_enable(u32 h_control, u32 on);
|
|
|
|
u16 hpi_compander_get_enable(u32 h_control, u32 *pon);
|
|
|
|
u16 hpi_compander_set_makeup_gain(u32 h_control, short makeup_gain0_01dB);
|
|
|
|
u16 hpi_compander_get_makeup_gain(u32 h_control, short *pn_makeup_gain0_01dB);
|
|
|
|
u16 hpi_compander_set_attack_time_constant(u32 h_control, u32 index,
|
|
u32 attack);
|
|
|
|
u16 hpi_compander_get_attack_time_constant(u32 h_control, u32 index,
|
|
u32 *pw_attack);
|
|
|
|
u16 hpi_compander_set_decay_time_constant(u32 h_control, u32 index,
|
|
u32 decay);
|
|
|
|
u16 hpi_compander_get_decay_time_constant(u32 h_control, u32 index,
|
|
u32 *pw_decay);
|
|
|
|
u16 hpi_compander_set_threshold(u32 h_control, u32 index,
|
|
short threshold0_01dB);
|
|
|
|
u16 hpi_compander_get_threshold(u32 h_control, u32 index,
|
|
short *pn_threshold0_01dB);
|
|
|
|
u16 hpi_compander_set_ratio(u32 h_control, u32 index, u32 ratio100);
|
|
|
|
u16 hpi_compander_get_ratio(u32 h_control, u32 index, u32 *pw_ratio100);
|
|
|
|
/********************/
|
|
/* Cobranet control */
|
|
/********************/
|
|
u16 hpi_cobranet_hmi_write(u32 h_control, u32 hmi_address, u32 byte_count,
|
|
u8 *pb_data);
|
|
|
|
u16 hpi_cobranet_hmi_read(u32 h_control, u32 hmi_address, u32 max_byte_count,
|
|
u32 *pbyte_count, u8 *pb_data);
|
|
|
|
u16 hpi_cobranet_hmi_get_status(u32 h_control, u32 *pstatus,
|
|
u32 *preadable_size, u32 *pwriteable_size);
|
|
|
|
u16 hpi_cobranet_get_ip_address(u32 h_control, u32 *pdw_ip_address);
|
|
|
|
u16 hpi_cobranet_set_ip_address(u32 h_control, u32 dw_ip_address);
|
|
|
|
u16 hpi_cobranet_get_static_ip_address(u32 h_control, u32 *pdw_ip_address);
|
|
|
|
u16 hpi_cobranet_set_static_ip_address(u32 h_control, u32 dw_ip_address);
|
|
|
|
u16 hpi_cobranet_get_macaddress(u32 h_control, u32 *p_mac_msbs,
|
|
u32 *p_mac_lsbs);
|
|
|
|
/*************************/
|
|
/* Tone Detector control */
|
|
/*************************/
|
|
u16 hpi_tone_detector_get_state(u32 hC, u32 *state);
|
|
|
|
u16 hpi_tone_detector_set_enable(u32 hC, u32 enable);
|
|
|
|
u16 hpi_tone_detector_get_enable(u32 hC, u32 *enable);
|
|
|
|
u16 hpi_tone_detector_set_event_enable(u32 hC, u32 event_enable);
|
|
|
|
u16 hpi_tone_detector_get_event_enable(u32 hC, u32 *event_enable);
|
|
|
|
u16 hpi_tone_detector_set_threshold(u32 hC, int threshold);
|
|
|
|
u16 hpi_tone_detector_get_threshold(u32 hC, int *threshold);
|
|
|
|
u16 hpi_tone_detector_get_frequency(u32 hC, u32 index, u32 *frequency);
|
|
|
|
/****************************/
|
|
/* Silence Detector control */
|
|
/****************************/
|
|
u16 hpi_silence_detector_get_state(u32 hC, u32 *state);
|
|
|
|
u16 hpi_silence_detector_set_enable(u32 hC, u32 enable);
|
|
|
|
u16 hpi_silence_detector_get_enable(u32 hC, u32 *enable);
|
|
|
|
u16 hpi_silence_detector_set_event_enable(u32 hC, u32 event_enable);
|
|
|
|
u16 hpi_silence_detector_get_event_enable(u32 hC, u32 *event_enable);
|
|
|
|
u16 hpi_silence_detector_set_delay(u32 hC, u32 delay);
|
|
|
|
u16 hpi_silence_detector_get_delay(u32 hC, u32 *delay);
|
|
|
|
u16 hpi_silence_detector_set_threshold(u32 hC, int threshold);
|
|
|
|
u16 hpi_silence_detector_get_threshold(u32 hC, int *threshold);
|
|
/*********************/
|
|
/* Utility functions */
|
|
/*********************/
|
|
|
|
u16 hpi_format_create(struct hpi_format *p_format, u16 channels, u16 format,
|
|
u32 sample_rate, u32 bit_rate, u32 attributes);
|
|
|
|
#endif /*_HPI_H_ */
|