kernel-fxtec-pro1x/drivers/mfd/stmpe.c
Mark Brown 0848c94fb4 mfd: core: Push irqdomain mapping out into devices
Currently the MFD core supports remapping MFD cell interrupts using an
irqdomain but only if the MFD is being instantiated using device tree
and only if the device tree bindings use the pattern of registering IPs
in the device tree with compatible properties.  This will be actively
harmful for drivers which support non-DT platforms and use this pattern
for their DT bindings as it will mean that the core will silently change
remapping behaviour and it is also limiting for drivers which don't do
DT with this particular pattern.  There is also a potential fragility if
there are interrupts not associated with MFD cells and all the cells are
omitted from the device tree for some reason.

Instead change the code to take an IRQ domain as an optional argument,
allowing drivers to take the decision about the parent domain for their
interrupts.  The one current user of this feature is ab8500-core, it has
the domain lookup pushed out into the driver.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-15 23:22:04 +02:00

1138 lines
26 KiB
C

/*
* ST Microelectronics MFD: stmpe's driver
*
* Copyright (C) ST-Ericsson SA 2010
*
* License Terms: GNU General Public License, version 2
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
*/
#include <linux/gpio.h>
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/pm.h>
#include <linux/slab.h>
#include <linux/mfd/core.h>
#include "stmpe.h"
static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
{
return stmpe->variant->enable(stmpe, blocks, true);
}
static int __stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
{
return stmpe->variant->enable(stmpe, blocks, false);
}
static int __stmpe_reg_read(struct stmpe *stmpe, u8 reg)
{
int ret;
ret = stmpe->ci->read_byte(stmpe, reg);
if (ret < 0)
dev_err(stmpe->dev, "failed to read reg %#x: %d\n", reg, ret);
dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret);
return ret;
}
static int __stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
{
int ret;
dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val);
ret = stmpe->ci->write_byte(stmpe, reg, val);
if (ret < 0)
dev_err(stmpe->dev, "failed to write reg %#x: %d\n", reg, ret);
return ret;
}
static int __stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
{
int ret;
ret = __stmpe_reg_read(stmpe, reg);
if (ret < 0)
return ret;
ret &= ~mask;
ret |= val;
return __stmpe_reg_write(stmpe, reg, ret);
}
static int __stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
u8 *values)
{
int ret;
ret = stmpe->ci->read_block(stmpe, reg, length, values);
if (ret < 0)
dev_err(stmpe->dev, "failed to read regs %#x: %d\n", reg, ret);
dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret);
stmpe_dump_bytes("stmpe rd: ", values, length);
return ret;
}
static int __stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
const u8 *values)
{
int ret;
dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length);
stmpe_dump_bytes("stmpe wr: ", values, length);
ret = stmpe->ci->write_block(stmpe, reg, length, values);
if (ret < 0)
dev_err(stmpe->dev, "failed to write regs %#x: %d\n", reg, ret);
return ret;
}
/**
* stmpe_enable - enable blocks on an STMPE device
* @stmpe: Device to work on
* @blocks: Mask of blocks (enum stmpe_block values) to enable
*/
int stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
{
int ret;
mutex_lock(&stmpe->lock);
ret = __stmpe_enable(stmpe, blocks);
mutex_unlock(&stmpe->lock);
return ret;
}
EXPORT_SYMBOL_GPL(stmpe_enable);
/**
* stmpe_disable - disable blocks on an STMPE device
* @stmpe: Device to work on
* @blocks: Mask of blocks (enum stmpe_block values) to enable
*/
int stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
{
int ret;
mutex_lock(&stmpe->lock);
ret = __stmpe_disable(stmpe, blocks);
mutex_unlock(&stmpe->lock);
return ret;
}
EXPORT_SYMBOL_GPL(stmpe_disable);
/**
* stmpe_reg_read() - read a single STMPE register
* @stmpe: Device to read from
* @reg: Register to read
*/
int stmpe_reg_read(struct stmpe *stmpe, u8 reg)
{
int ret;
mutex_lock(&stmpe->lock);
ret = __stmpe_reg_read(stmpe, reg);
mutex_unlock(&stmpe->lock);
return ret;
}
EXPORT_SYMBOL_GPL(stmpe_reg_read);
/**
* stmpe_reg_write() - write a single STMPE register
* @stmpe: Device to write to
* @reg: Register to write
* @val: Value to write
*/
int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
{
int ret;
mutex_lock(&stmpe->lock);
ret = __stmpe_reg_write(stmpe, reg, val);
mutex_unlock(&stmpe->lock);
return ret;
}
EXPORT_SYMBOL_GPL(stmpe_reg_write);
/**
* stmpe_set_bits() - set the value of a bitfield in a STMPE register
* @stmpe: Device to write to
* @reg: Register to write
* @mask: Mask of bits to set
* @val: Value to set
*/
int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
{
int ret;
mutex_lock(&stmpe->lock);
ret = __stmpe_set_bits(stmpe, reg, mask, val);
mutex_unlock(&stmpe->lock);
return ret;
}
EXPORT_SYMBOL_GPL(stmpe_set_bits);
/**
* stmpe_block_read() - read multiple STMPE registers
* @stmpe: Device to read from
* @reg: First register
* @length: Number of registers
* @values: Buffer to write to
*/
int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values)
{
int ret;
mutex_lock(&stmpe->lock);
ret = __stmpe_block_read(stmpe, reg, length, values);
mutex_unlock(&stmpe->lock);
return ret;
}
EXPORT_SYMBOL_GPL(stmpe_block_read);
/**
* stmpe_block_write() - write multiple STMPE registers
* @stmpe: Device to write to
* @reg: First register
* @length: Number of registers
* @values: Values to write
*/
int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
const u8 *values)
{
int ret;
mutex_lock(&stmpe->lock);
ret = __stmpe_block_write(stmpe, reg, length, values);
mutex_unlock(&stmpe->lock);
return ret;
}
EXPORT_SYMBOL_GPL(stmpe_block_write);
/**
* stmpe_set_altfunc()- set the alternate function for STMPE pins
* @stmpe: Device to configure
* @pins: Bitmask of pins to affect
* @block: block to enable alternate functions for
*
* @pins is assumed to have a bit set for each of the bits whose alternate
* function is to be changed, numbered according to the GPIOXY numbers.
*
* If the GPIO module is not enabled, this function automatically enables it in
* order to perform the change.
*/
int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block)
{
struct stmpe_variant_info *variant = stmpe->variant;
u8 regaddr = stmpe->regs[STMPE_IDX_GPAFR_U_MSB];
int af_bits = variant->af_bits;
int numregs = DIV_ROUND_UP(stmpe->num_gpios * af_bits, 8);
int mask = (1 << af_bits) - 1;
u8 regs[numregs];
int af, afperreg, ret;
if (!variant->get_altfunc)
return 0;
afperreg = 8 / af_bits;
mutex_lock(&stmpe->lock);
ret = __stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
if (ret < 0)
goto out;
ret = __stmpe_block_read(stmpe, regaddr, numregs, regs);
if (ret < 0)
goto out;
af = variant->get_altfunc(stmpe, block);
while (pins) {
int pin = __ffs(pins);
int regoffset = numregs - (pin / afperreg) - 1;
int pos = (pin % afperreg) * (8 / afperreg);
regs[regoffset] &= ~(mask << pos);
regs[regoffset] |= af << pos;
pins &= ~(1 << pin);
}
ret = __stmpe_block_write(stmpe, regaddr, numregs, regs);
out:
mutex_unlock(&stmpe->lock);
return ret;
}
EXPORT_SYMBOL_GPL(stmpe_set_altfunc);
/*
* GPIO (all variants)
*/
static struct resource stmpe_gpio_resources[] = {
/* Start and end filled dynamically */
{
.flags = IORESOURCE_IRQ,
},
};
static struct mfd_cell stmpe_gpio_cell = {
.name = "stmpe-gpio",
.resources = stmpe_gpio_resources,
.num_resources = ARRAY_SIZE(stmpe_gpio_resources),
};
static struct mfd_cell stmpe_gpio_cell_noirq = {
.name = "stmpe-gpio",
/* gpio cell resources consist of an irq only so no resources here */
};
/*
* Keypad (1601, 2401, 2403)
*/
static struct resource stmpe_keypad_resources[] = {
{
.name = "KEYPAD",
.start = 0,
.end = 0,
.flags = IORESOURCE_IRQ,
},
{
.name = "KEYPAD_OVER",
.start = 1,
.end = 1,
.flags = IORESOURCE_IRQ,
},
};
static struct mfd_cell stmpe_keypad_cell = {
.name = "stmpe-keypad",
.resources = stmpe_keypad_resources,
.num_resources = ARRAY_SIZE(stmpe_keypad_resources),
};
/*
* STMPE801
*/
static const u8 stmpe801_regs[] = {
[STMPE_IDX_CHIP_ID] = STMPE801_REG_CHIP_ID,
[STMPE_IDX_ICR_LSB] = STMPE801_REG_SYS_CTRL,
[STMPE_IDX_GPMR_LSB] = STMPE801_REG_GPIO_MP_STA,
[STMPE_IDX_GPSR_LSB] = STMPE801_REG_GPIO_SET_PIN,
[STMPE_IDX_GPCR_LSB] = STMPE801_REG_GPIO_SET_PIN,
[STMPE_IDX_GPDR_LSB] = STMPE801_REG_GPIO_DIR,
[STMPE_IDX_IEGPIOR_LSB] = STMPE801_REG_GPIO_INT_EN,
[STMPE_IDX_ISGPIOR_MSB] = STMPE801_REG_GPIO_INT_STA,
};
static struct stmpe_variant_block stmpe801_blocks[] = {
{
.cell = &stmpe_gpio_cell,
.irq = 0,
.block = STMPE_BLOCK_GPIO,
},
};
static struct stmpe_variant_block stmpe801_blocks_noirq[] = {
{
.cell = &stmpe_gpio_cell_noirq,
.block = STMPE_BLOCK_GPIO,
},
};
static int stmpe801_enable(struct stmpe *stmpe, unsigned int blocks,
bool enable)
{
if (blocks & STMPE_BLOCK_GPIO)
return 0;
else
return -EINVAL;
}
static struct stmpe_variant_info stmpe801 = {
.name = "stmpe801",
.id_val = STMPE801_ID,
.id_mask = 0xffff,
.num_gpios = 8,
.regs = stmpe801_regs,
.blocks = stmpe801_blocks,
.num_blocks = ARRAY_SIZE(stmpe801_blocks),
.num_irqs = STMPE801_NR_INTERNAL_IRQS,
.enable = stmpe801_enable,
};
static struct stmpe_variant_info stmpe801_noirq = {
.name = "stmpe801",
.id_val = STMPE801_ID,
.id_mask = 0xffff,
.num_gpios = 8,
.regs = stmpe801_regs,
.blocks = stmpe801_blocks_noirq,
.num_blocks = ARRAY_SIZE(stmpe801_blocks_noirq),
.enable = stmpe801_enable,
};
/*
* Touchscreen (STMPE811 or STMPE610)
*/
static struct resource stmpe_ts_resources[] = {
{
.name = "TOUCH_DET",
.start = 0,
.end = 0,
.flags = IORESOURCE_IRQ,
},
{
.name = "FIFO_TH",
.start = 1,
.end = 1,
.flags = IORESOURCE_IRQ,
},
};
static struct mfd_cell stmpe_ts_cell = {
.name = "stmpe-ts",
.resources = stmpe_ts_resources,
.num_resources = ARRAY_SIZE(stmpe_ts_resources),
};
/*
* STMPE811 or STMPE610
*/
static const u8 stmpe811_regs[] = {
[STMPE_IDX_CHIP_ID] = STMPE811_REG_CHIP_ID,
[STMPE_IDX_ICR_LSB] = STMPE811_REG_INT_CTRL,
[STMPE_IDX_IER_LSB] = STMPE811_REG_INT_EN,
[STMPE_IDX_ISR_MSB] = STMPE811_REG_INT_STA,
[STMPE_IDX_GPMR_LSB] = STMPE811_REG_GPIO_MP_STA,
[STMPE_IDX_GPSR_LSB] = STMPE811_REG_GPIO_SET_PIN,
[STMPE_IDX_GPCR_LSB] = STMPE811_REG_GPIO_CLR_PIN,
[STMPE_IDX_GPDR_LSB] = STMPE811_REG_GPIO_DIR,
[STMPE_IDX_GPRER_LSB] = STMPE811_REG_GPIO_RE,
[STMPE_IDX_GPFER_LSB] = STMPE811_REG_GPIO_FE,
[STMPE_IDX_GPAFR_U_MSB] = STMPE811_REG_GPIO_AF,
[STMPE_IDX_IEGPIOR_LSB] = STMPE811_REG_GPIO_INT_EN,
[STMPE_IDX_ISGPIOR_MSB] = STMPE811_REG_GPIO_INT_STA,
[STMPE_IDX_GPEDR_MSB] = STMPE811_REG_GPIO_ED,
};
static struct stmpe_variant_block stmpe811_blocks[] = {
{
.cell = &stmpe_gpio_cell,
.irq = STMPE811_IRQ_GPIOC,
.block = STMPE_BLOCK_GPIO,
},
{
.cell = &stmpe_ts_cell,
.irq = STMPE811_IRQ_TOUCH_DET,
.block = STMPE_BLOCK_TOUCHSCREEN,
},
};
static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks,
bool enable)
{
unsigned int mask = 0;
if (blocks & STMPE_BLOCK_GPIO)
mask |= STMPE811_SYS_CTRL2_GPIO_OFF;
if (blocks & STMPE_BLOCK_ADC)
mask |= STMPE811_SYS_CTRL2_ADC_OFF;
if (blocks & STMPE_BLOCK_TOUCHSCREEN)
mask |= STMPE811_SYS_CTRL2_TSC_OFF;
return __stmpe_set_bits(stmpe, STMPE811_REG_SYS_CTRL2, mask,
enable ? 0 : mask);
}
static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
{
/* 0 for touchscreen, 1 for GPIO */
return block != STMPE_BLOCK_TOUCHSCREEN;
}
static struct stmpe_variant_info stmpe811 = {
.name = "stmpe811",
.id_val = 0x0811,
.id_mask = 0xffff,
.num_gpios = 8,
.af_bits = 1,
.regs = stmpe811_regs,
.blocks = stmpe811_blocks,
.num_blocks = ARRAY_SIZE(stmpe811_blocks),
.num_irqs = STMPE811_NR_INTERNAL_IRQS,
.enable = stmpe811_enable,
.get_altfunc = stmpe811_get_altfunc,
};
/* Similar to 811, except number of gpios */
static struct stmpe_variant_info stmpe610 = {
.name = "stmpe610",
.id_val = 0x0811,
.id_mask = 0xffff,
.num_gpios = 6,
.af_bits = 1,
.regs = stmpe811_regs,
.blocks = stmpe811_blocks,
.num_blocks = ARRAY_SIZE(stmpe811_blocks),
.num_irqs = STMPE811_NR_INTERNAL_IRQS,
.enable = stmpe811_enable,
.get_altfunc = stmpe811_get_altfunc,
};
/*
* STMPE1601
*/
static const u8 stmpe1601_regs[] = {
[STMPE_IDX_CHIP_ID] = STMPE1601_REG_CHIP_ID,
[STMPE_IDX_ICR_LSB] = STMPE1601_REG_ICR_LSB,
[STMPE_IDX_IER_LSB] = STMPE1601_REG_IER_LSB,
[STMPE_IDX_ISR_MSB] = STMPE1601_REG_ISR_MSB,
[STMPE_IDX_GPMR_LSB] = STMPE1601_REG_GPIO_MP_LSB,
[STMPE_IDX_GPSR_LSB] = STMPE1601_REG_GPIO_SET_LSB,
[STMPE_IDX_GPCR_LSB] = STMPE1601_REG_GPIO_CLR_LSB,
[STMPE_IDX_GPDR_LSB] = STMPE1601_REG_GPIO_SET_DIR_LSB,
[STMPE_IDX_GPRER_LSB] = STMPE1601_REG_GPIO_RE_LSB,
[STMPE_IDX_GPFER_LSB] = STMPE1601_REG_GPIO_FE_LSB,
[STMPE_IDX_GPAFR_U_MSB] = STMPE1601_REG_GPIO_AF_U_MSB,
[STMPE_IDX_IEGPIOR_LSB] = STMPE1601_REG_INT_EN_GPIO_MASK_LSB,
[STMPE_IDX_ISGPIOR_MSB] = STMPE1601_REG_INT_STA_GPIO_MSB,
[STMPE_IDX_GPEDR_MSB] = STMPE1601_REG_GPIO_ED_MSB,
};
static struct stmpe_variant_block stmpe1601_blocks[] = {
{
.cell = &stmpe_gpio_cell,
.irq = STMPE24XX_IRQ_GPIOC,
.block = STMPE_BLOCK_GPIO,
},
{
.cell = &stmpe_keypad_cell,
.irq = STMPE24XX_IRQ_KEYPAD,
.block = STMPE_BLOCK_KEYPAD,
},
};
/* supported autosleep timeout delay (in msecs) */
static const int stmpe_autosleep_delay[] = {
4, 16, 32, 64, 128, 256, 512, 1024,
};
static int stmpe_round_timeout(int timeout)
{
int i;
for (i = 0; i < ARRAY_SIZE(stmpe_autosleep_delay); i++) {
if (stmpe_autosleep_delay[i] >= timeout)
return i;
}
/*
* requests for delays longer than supported should not return the
* longest supported delay
*/
return -EINVAL;
}
static int stmpe_autosleep(struct stmpe *stmpe, int autosleep_timeout)
{
int ret;
if (!stmpe->variant->enable_autosleep)
return -ENOSYS;
mutex_lock(&stmpe->lock);
ret = stmpe->variant->enable_autosleep(stmpe, autosleep_timeout);
mutex_unlock(&stmpe->lock);
return ret;
}
/*
* Both stmpe 1601/2403 support same layout for autosleep
*/
static int stmpe1601_autosleep(struct stmpe *stmpe,
int autosleep_timeout)
{
int ret, timeout;
/* choose the best available timeout */
timeout = stmpe_round_timeout(autosleep_timeout);
if (timeout < 0) {
dev_err(stmpe->dev, "invalid timeout\n");
return timeout;
}
ret = __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2,
STMPE1601_AUTOSLEEP_TIMEOUT_MASK,
timeout);
if (ret < 0)
return ret;
return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2,
STPME1601_AUTOSLEEP_ENABLE,
STPME1601_AUTOSLEEP_ENABLE);
}
static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks,
bool enable)
{
unsigned int mask = 0;
if (blocks & STMPE_BLOCK_GPIO)
mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO;
if (blocks & STMPE_BLOCK_KEYPAD)
mask |= STMPE1601_SYS_CTRL_ENABLE_KPC;
return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL, mask,
enable ? mask : 0);
}
static int stmpe1601_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
{
switch (block) {
case STMPE_BLOCK_PWM:
return 2;
case STMPE_BLOCK_KEYPAD:
return 1;
case STMPE_BLOCK_GPIO:
default:
return 0;
}
}
static struct stmpe_variant_info stmpe1601 = {
.name = "stmpe1601",
.id_val = 0x0210,
.id_mask = 0xfff0, /* at least 0x0210 and 0x0212 */
.num_gpios = 16,
.af_bits = 2,
.regs = stmpe1601_regs,
.blocks = stmpe1601_blocks,
.num_blocks = ARRAY_SIZE(stmpe1601_blocks),
.num_irqs = STMPE1601_NR_INTERNAL_IRQS,
.enable = stmpe1601_enable,
.get_altfunc = stmpe1601_get_altfunc,
.enable_autosleep = stmpe1601_autosleep,
};
/*
* STMPE24XX
*/
static const u8 stmpe24xx_regs[] = {
[STMPE_IDX_CHIP_ID] = STMPE24XX_REG_CHIP_ID,
[STMPE_IDX_ICR_LSB] = STMPE24XX_REG_ICR_LSB,
[STMPE_IDX_IER_LSB] = STMPE24XX_REG_IER_LSB,
[STMPE_IDX_ISR_MSB] = STMPE24XX_REG_ISR_MSB,
[STMPE_IDX_GPMR_LSB] = STMPE24XX_REG_GPMR_LSB,
[STMPE_IDX_GPSR_LSB] = STMPE24XX_REG_GPSR_LSB,
[STMPE_IDX_GPCR_LSB] = STMPE24XX_REG_GPCR_LSB,
[STMPE_IDX_GPDR_LSB] = STMPE24XX_REG_GPDR_LSB,
[STMPE_IDX_GPRER_LSB] = STMPE24XX_REG_GPRER_LSB,
[STMPE_IDX_GPFER_LSB] = STMPE24XX_REG_GPFER_LSB,
[STMPE_IDX_GPAFR_U_MSB] = STMPE24XX_REG_GPAFR_U_MSB,
[STMPE_IDX_IEGPIOR_LSB] = STMPE24XX_REG_IEGPIOR_LSB,
[STMPE_IDX_ISGPIOR_MSB] = STMPE24XX_REG_ISGPIOR_MSB,
[STMPE_IDX_GPEDR_MSB] = STMPE24XX_REG_GPEDR_MSB,
};
static struct stmpe_variant_block stmpe24xx_blocks[] = {
{
.cell = &stmpe_gpio_cell,
.irq = STMPE24XX_IRQ_GPIOC,
.block = STMPE_BLOCK_GPIO,
},
{
.cell = &stmpe_keypad_cell,
.irq = STMPE24XX_IRQ_KEYPAD,
.block = STMPE_BLOCK_KEYPAD,
},
};
static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks,
bool enable)
{
unsigned int mask = 0;
if (blocks & STMPE_BLOCK_GPIO)
mask |= STMPE24XX_SYS_CTRL_ENABLE_GPIO;
if (blocks & STMPE_BLOCK_KEYPAD)
mask |= STMPE24XX_SYS_CTRL_ENABLE_KPC;
return __stmpe_set_bits(stmpe, STMPE24XX_REG_SYS_CTRL, mask,
enable ? mask : 0);
}
static int stmpe24xx_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
{
switch (block) {
case STMPE_BLOCK_ROTATOR:
return 2;
case STMPE_BLOCK_KEYPAD:
return 1;
case STMPE_BLOCK_GPIO:
default:
return 0;
}
}
static struct stmpe_variant_info stmpe2401 = {
.name = "stmpe2401",
.id_val = 0x0101,
.id_mask = 0xffff,
.num_gpios = 24,
.af_bits = 2,
.regs = stmpe24xx_regs,
.blocks = stmpe24xx_blocks,
.num_blocks = ARRAY_SIZE(stmpe24xx_blocks),
.num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
.enable = stmpe24xx_enable,
.get_altfunc = stmpe24xx_get_altfunc,
};
static struct stmpe_variant_info stmpe2403 = {
.name = "stmpe2403",
.id_val = 0x0120,
.id_mask = 0xffff,
.num_gpios = 24,
.af_bits = 2,
.regs = stmpe24xx_regs,
.blocks = stmpe24xx_blocks,
.num_blocks = ARRAY_SIZE(stmpe24xx_blocks),
.num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
.enable = stmpe24xx_enable,
.get_altfunc = stmpe24xx_get_altfunc,
.enable_autosleep = stmpe1601_autosleep, /* same as stmpe1601 */
};
static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = {
[STMPE610] = &stmpe610,
[STMPE801] = &stmpe801,
[STMPE811] = &stmpe811,
[STMPE1601] = &stmpe1601,
[STMPE2401] = &stmpe2401,
[STMPE2403] = &stmpe2403,
};
/*
* These devices can be connected in a 'no-irq' configuration - the irq pin
* is not used and the device cannot interrupt the CPU. Here we only list
* devices which support this configuration - the driver will fail probing
* for any devices not listed here which are configured in this way.
*/
static struct stmpe_variant_info *stmpe_noirq_variant_info[STMPE_NBR_PARTS] = {
[STMPE801] = &stmpe801_noirq,
};
static irqreturn_t stmpe_irq(int irq, void *data)
{
struct stmpe *stmpe = data;
struct stmpe_variant_info *variant = stmpe->variant;
int num = DIV_ROUND_UP(variant->num_irqs, 8);
u8 israddr = stmpe->regs[STMPE_IDX_ISR_MSB];
u8 isr[num];
int ret;
int i;
if (variant->id_val == STMPE801_ID) {
handle_nested_irq(stmpe->irq_base);
return IRQ_HANDLED;
}
ret = stmpe_block_read(stmpe, israddr, num, isr);
if (ret < 0)
return IRQ_NONE;
for (i = 0; i < num; i++) {
int bank = num - i - 1;
u8 status = isr[i];
u8 clear;
status &= stmpe->ier[bank];
if (!status)
continue;
clear = status;
while (status) {
int bit = __ffs(status);
int line = bank * 8 + bit;
handle_nested_irq(stmpe->irq_base + line);
status &= ~(1 << bit);
}
stmpe_reg_write(stmpe, israddr + i, clear);
}
return IRQ_HANDLED;
}
static void stmpe_irq_lock(struct irq_data *data)
{
struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
mutex_lock(&stmpe->irq_lock);
}
static void stmpe_irq_sync_unlock(struct irq_data *data)
{
struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
struct stmpe_variant_info *variant = stmpe->variant;
int num = DIV_ROUND_UP(variant->num_irqs, 8);
int i;
for (i = 0; i < num; i++) {
u8 new = stmpe->ier[i];
u8 old = stmpe->oldier[i];
if (new == old)
continue;
stmpe->oldier[i] = new;
stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_IER_LSB] - i, new);
}
mutex_unlock(&stmpe->irq_lock);
}
static void stmpe_irq_mask(struct irq_data *data)
{
struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
int offset = data->irq - stmpe->irq_base;
int regoffset = offset / 8;
int mask = 1 << (offset % 8);
stmpe->ier[regoffset] &= ~mask;
}
static void stmpe_irq_unmask(struct irq_data *data)
{
struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
int offset = data->irq - stmpe->irq_base;
int regoffset = offset / 8;
int mask = 1 << (offset % 8);
stmpe->ier[regoffset] |= mask;
}
static struct irq_chip stmpe_irq_chip = {
.name = "stmpe",
.irq_bus_lock = stmpe_irq_lock,
.irq_bus_sync_unlock = stmpe_irq_sync_unlock,
.irq_mask = stmpe_irq_mask,
.irq_unmask = stmpe_irq_unmask,
};
static int __devinit stmpe_irq_init(struct stmpe *stmpe)
{
struct irq_chip *chip = NULL;
int num_irqs = stmpe->variant->num_irqs;
int base = stmpe->irq_base;
int irq;
if (stmpe->variant->id_val != STMPE801_ID)
chip = &stmpe_irq_chip;
for (irq = base; irq < base + num_irqs; irq++) {
irq_set_chip_data(irq, stmpe);
irq_set_chip_and_handler(irq, chip, handle_edge_irq);
irq_set_nested_thread(irq, 1);
#ifdef CONFIG_ARM
set_irq_flags(irq, IRQF_VALID);
#else
irq_set_noprobe(irq);
#endif
}
return 0;
}
static void stmpe_irq_remove(struct stmpe *stmpe)
{
int num_irqs = stmpe->variant->num_irqs;
int base = stmpe->irq_base;
int irq;
for (irq = base; irq < base + num_irqs; irq++) {
#ifdef CONFIG_ARM
set_irq_flags(irq, 0);
#endif
irq_set_chip_and_handler(irq, NULL, NULL);
irq_set_chip_data(irq, NULL);
}
}
static int __devinit stmpe_chip_init(struct stmpe *stmpe)
{
unsigned int irq_trigger = stmpe->pdata->irq_trigger;
int autosleep_timeout = stmpe->pdata->autosleep_timeout;
struct stmpe_variant_info *variant = stmpe->variant;
u8 icr = 0;
unsigned int id;
u8 data[2];
int ret;
ret = stmpe_block_read(stmpe, stmpe->regs[STMPE_IDX_CHIP_ID],
ARRAY_SIZE(data), data);
if (ret < 0)
return ret;
id = (data[0] << 8) | data[1];
if ((id & variant->id_mask) != variant->id_val) {
dev_err(stmpe->dev, "unknown chip id: %#x\n", id);
return -EINVAL;
}
dev_info(stmpe->dev, "%s detected, chip id: %#x\n", variant->name, id);
/* Disable all modules -- subdrivers should enable what they need. */
ret = stmpe_disable(stmpe, ~0);
if (ret)
return ret;
if (stmpe->irq >= 0) {
if (id == STMPE801_ID)
icr = STMPE801_REG_SYS_CTRL_INT_EN;
else
icr = STMPE_ICR_LSB_GIM;
/* STMPE801 doesn't support Edge interrupts */
if (id != STMPE801_ID) {
if (irq_trigger == IRQF_TRIGGER_FALLING ||
irq_trigger == IRQF_TRIGGER_RISING)
icr |= STMPE_ICR_LSB_EDGE;
}
if (irq_trigger == IRQF_TRIGGER_RISING ||
irq_trigger == IRQF_TRIGGER_HIGH) {
if (id == STMPE801_ID)
icr |= STMPE801_REG_SYS_CTRL_INT_HI;
else
icr |= STMPE_ICR_LSB_HIGH;
}
if (stmpe->pdata->irq_invert_polarity) {
if (id == STMPE801_ID)
icr ^= STMPE801_REG_SYS_CTRL_INT_HI;
else
icr ^= STMPE_ICR_LSB_HIGH;
}
}
if (stmpe->pdata->autosleep) {
ret = stmpe_autosleep(stmpe, autosleep_timeout);
if (ret)
return ret;
}
return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr);
}
static int __devinit stmpe_add_device(struct stmpe *stmpe,
struct mfd_cell *cell, int irq)
{
return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1,
NULL, stmpe->irq_base + irq, NULL);
}
static int __devinit stmpe_devices_init(struct stmpe *stmpe)
{
struct stmpe_variant_info *variant = stmpe->variant;
unsigned int platform_blocks = stmpe->pdata->blocks;
int ret = -EINVAL;
int i;
for (i = 0; i < variant->num_blocks; i++) {
struct stmpe_variant_block *block = &variant->blocks[i];
if (!(platform_blocks & block->block))
continue;
platform_blocks &= ~block->block;
ret = stmpe_add_device(stmpe, block->cell, block->irq);
if (ret)
return ret;
}
if (platform_blocks)
dev_warn(stmpe->dev,
"platform wants blocks (%#x) not present on variant",
platform_blocks);
return ret;
}
/* Called from client specific probe routines */
int __devinit stmpe_probe(struct stmpe_client_info *ci, int partnum)
{
struct stmpe_platform_data *pdata = dev_get_platdata(ci->dev);
struct stmpe *stmpe;
int ret;
if (!pdata)
return -EINVAL;
stmpe = kzalloc(sizeof(struct stmpe), GFP_KERNEL);
if (!stmpe)
return -ENOMEM;
mutex_init(&stmpe->irq_lock);
mutex_init(&stmpe->lock);
stmpe->dev = ci->dev;
stmpe->client = ci->client;
stmpe->pdata = pdata;
stmpe->irq_base = pdata->irq_base;
stmpe->ci = ci;
stmpe->partnum = partnum;
stmpe->variant = stmpe_variant_info[partnum];
stmpe->regs = stmpe->variant->regs;
stmpe->num_gpios = stmpe->variant->num_gpios;
dev_set_drvdata(stmpe->dev, stmpe);
if (ci->init)
ci->init(stmpe);
if (pdata->irq_over_gpio) {
ret = gpio_request_one(pdata->irq_gpio, GPIOF_DIR_IN, "stmpe");
if (ret) {
dev_err(stmpe->dev, "failed to request IRQ GPIO: %d\n",
ret);
goto out_free;
}
stmpe->irq = gpio_to_irq(pdata->irq_gpio);
} else {
stmpe->irq = ci->irq;
}
if (stmpe->irq < 0) {
/* use alternate variant info for no-irq mode, if supported */
dev_info(stmpe->dev,
"%s configured in no-irq mode by platform data\n",
stmpe->variant->name);
if (!stmpe_noirq_variant_info[stmpe->partnum]) {
dev_err(stmpe->dev,
"%s does not support no-irq mode!\n",
stmpe->variant->name);
ret = -ENODEV;
goto free_gpio;
}
stmpe->variant = stmpe_noirq_variant_info[stmpe->partnum];
}
ret = stmpe_chip_init(stmpe);
if (ret)
goto free_gpio;
if (stmpe->irq >= 0) {
ret = stmpe_irq_init(stmpe);
if (ret)
goto free_gpio;
ret = request_threaded_irq(stmpe->irq, NULL, stmpe_irq,
pdata->irq_trigger | IRQF_ONESHOT,
"stmpe", stmpe);
if (ret) {
dev_err(stmpe->dev, "failed to request IRQ: %d\n",
ret);
goto out_removeirq;
}
}
ret = stmpe_devices_init(stmpe);
if (ret) {
dev_err(stmpe->dev, "failed to add children\n");
goto out_removedevs;
}
return 0;
out_removedevs:
mfd_remove_devices(stmpe->dev);
if (stmpe->irq >= 0)
free_irq(stmpe->irq, stmpe);
out_removeirq:
if (stmpe->irq >= 0)
stmpe_irq_remove(stmpe);
free_gpio:
if (pdata->irq_over_gpio)
gpio_free(pdata->irq_gpio);
out_free:
kfree(stmpe);
return ret;
}
int stmpe_remove(struct stmpe *stmpe)
{
mfd_remove_devices(stmpe->dev);
if (stmpe->irq >= 0) {
free_irq(stmpe->irq, stmpe);
stmpe_irq_remove(stmpe);
}
if (stmpe->pdata->irq_over_gpio)
gpio_free(stmpe->pdata->irq_gpio);
kfree(stmpe);
return 0;
}
#ifdef CONFIG_PM
static int stmpe_suspend(struct device *dev)
{
struct stmpe *stmpe = dev_get_drvdata(dev);
if (stmpe->irq >= 0 && device_may_wakeup(dev))
enable_irq_wake(stmpe->irq);
return 0;
}
static int stmpe_resume(struct device *dev)
{
struct stmpe *stmpe = dev_get_drvdata(dev);
if (stmpe->irq >= 0 && device_may_wakeup(dev))
disable_irq_wake(stmpe->irq);
return 0;
}
const struct dev_pm_ops stmpe_dev_pm_ops = {
.suspend = stmpe_suspend,
.resume = stmpe_resume,
};
#endif