9b7e31bbf4
Since commit 1c6c69525b ("genirq: Reject bogus threaded irq requests")
threaded IRQs without a primary handler need to be requested with
IRQF_ONESHOT, otherwise the request will fail. This patch adds the
IRQF_ONESHOT to input drivers where it is missing. Not modified by
this patch are those drivers where the requested IRQ will always be a
nested IRQ (e.g. because it's part of an MFD), since for this special
case IRQF_ONESHOT is not required to be specified when requesting the
IRQ.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
266 lines
6.2 KiB
C
266 lines
6.2 KiB
C
/*
|
|
* Atmel AT42QT1070 QTouch Sensor Controller
|
|
*
|
|
* Copyright (C) 2011 Atmel
|
|
*
|
|
* Authors: Bo Shen <voice.shen@atmel.com>
|
|
*
|
|
* Base on AT42QT2160 driver by:
|
|
* Raphael Derosso Pereira <raphaelpereira@gmail.com>
|
|
* Copyright (C) 2009
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/input.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/delay.h>
|
|
|
|
/* Address for each register */
|
|
#define CHIP_ID 0x00
|
|
#define QT1070_CHIP_ID 0x2E
|
|
|
|
#define FW_VERSION 0x01
|
|
#define QT1070_FW_VERSION 0x15
|
|
|
|
#define DET_STATUS 0x02
|
|
|
|
#define KEY_STATUS 0x03
|
|
|
|
/* Calibrate */
|
|
#define CALIBRATE_CMD 0x38
|
|
#define QT1070_CAL_TIME 200
|
|
|
|
/* Reset */
|
|
#define RESET 0x39
|
|
#define QT1070_RESET_TIME 255
|
|
|
|
/* AT42QT1070 support up to 7 keys */
|
|
static const unsigned short qt1070_key2code[] = {
|
|
KEY_0, KEY_1, KEY_2, KEY_3,
|
|
KEY_4, KEY_5, KEY_6,
|
|
};
|
|
|
|
struct qt1070_data {
|
|
struct i2c_client *client;
|
|
struct input_dev *input;
|
|
unsigned int irq;
|
|
unsigned short keycodes[ARRAY_SIZE(qt1070_key2code)];
|
|
u8 last_keys;
|
|
};
|
|
|
|
static int qt1070_read(struct i2c_client *client, u8 reg)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(client, reg);
|
|
if (ret < 0)
|
|
dev_err(&client->dev,
|
|
"can not read register, returned %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int qt1070_write(struct i2c_client *client, u8 reg, u8 data)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_smbus_write_byte_data(client, reg, data);
|
|
if (ret < 0)
|
|
dev_err(&client->dev,
|
|
"can not write register, returned %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static bool __devinit qt1070_identify(struct i2c_client *client)
|
|
{
|
|
int id, ver;
|
|
|
|
/* Read Chip ID */
|
|
id = qt1070_read(client, CHIP_ID);
|
|
if (id != QT1070_CHIP_ID) {
|
|
dev_err(&client->dev, "ID %d not supported\n", id);
|
|
return false;
|
|
}
|
|
|
|
/* Read firmware version */
|
|
ver = qt1070_read(client, FW_VERSION);
|
|
if (ver < 0) {
|
|
dev_err(&client->dev, "could not read the firmware version\n");
|
|
return false;
|
|
}
|
|
|
|
dev_info(&client->dev, "AT42QT1070 firmware version %x\n", ver);
|
|
|
|
return true;
|
|
}
|
|
|
|
static irqreturn_t qt1070_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct qt1070_data *data = dev_id;
|
|
struct i2c_client *client = data->client;
|
|
struct input_dev *input = data->input;
|
|
int i;
|
|
u8 new_keys, keyval, mask = 0x01;
|
|
|
|
/* Read the detected status register, thus clearing interrupt */
|
|
qt1070_read(client, DET_STATUS);
|
|
|
|
/* Read which key changed */
|
|
new_keys = qt1070_read(client, KEY_STATUS);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(qt1070_key2code); i++) {
|
|
keyval = new_keys & mask;
|
|
if ((data->last_keys & mask) != keyval)
|
|
input_report_key(input, data->keycodes[i], keyval);
|
|
mask <<= 1;
|
|
}
|
|
input_sync(input);
|
|
|
|
data->last_keys = new_keys;
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int __devinit qt1070_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct qt1070_data *data;
|
|
struct input_dev *input;
|
|
int i;
|
|
int err;
|
|
|
|
err = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE);
|
|
if (!err) {
|
|
dev_err(&client->dev, "%s adapter not supported\n",
|
|
dev_driver_string(&client->adapter->dev));
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!client->irq) {
|
|
dev_err(&client->dev, "please assign the irq to this device\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Identify the qt1070 chip */
|
|
if (!qt1070_identify(client))
|
|
return -ENODEV;
|
|
|
|
data = kzalloc(sizeof(struct qt1070_data), GFP_KERNEL);
|
|
input = input_allocate_device();
|
|
if (!data || !input) {
|
|
dev_err(&client->dev, "insufficient memory\n");
|
|
err = -ENOMEM;
|
|
goto err_free_mem;
|
|
}
|
|
|
|
data->client = client;
|
|
data->input = input;
|
|
data->irq = client->irq;
|
|
|
|
input->name = "AT42QT1070 QTouch Sensor";
|
|
input->dev.parent = &client->dev;
|
|
input->id.bustype = BUS_I2C;
|
|
|
|
/* Add the keycode */
|
|
input->keycode = data->keycodes;
|
|
input->keycodesize = sizeof(data->keycodes[0]);
|
|
input->keycodemax = ARRAY_SIZE(qt1070_key2code);
|
|
|
|
__set_bit(EV_KEY, input->evbit);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(qt1070_key2code); i++) {
|
|
data->keycodes[i] = qt1070_key2code[i];
|
|
__set_bit(qt1070_key2code[i], input->keybit);
|
|
}
|
|
|
|
/* Calibrate device */
|
|
qt1070_write(client, CALIBRATE_CMD, 1);
|
|
msleep(QT1070_CAL_TIME);
|
|
|
|
/* Soft reset */
|
|
qt1070_write(client, RESET, 1);
|
|
msleep(QT1070_RESET_TIME);
|
|
|
|
err = request_threaded_irq(client->irq, NULL, qt1070_interrupt,
|
|
IRQF_TRIGGER_NONE | IRQF_ONESHOT,
|
|
client->dev.driver->name, data);
|
|
if (err) {
|
|
dev_err(&client->dev, "fail to request irq\n");
|
|
goto err_free_mem;
|
|
}
|
|
|
|
/* Register the input device */
|
|
err = input_register_device(data->input);
|
|
if (err) {
|
|
dev_err(&client->dev, "Failed to register input device\n");
|
|
goto err_free_irq;
|
|
}
|
|
|
|
i2c_set_clientdata(client, data);
|
|
|
|
/* Read to clear the chang line */
|
|
qt1070_read(client, DET_STATUS);
|
|
|
|
return 0;
|
|
|
|
err_free_irq:
|
|
free_irq(client->irq, data);
|
|
err_free_mem:
|
|
input_free_device(input);
|
|
kfree(data);
|
|
return err;
|
|
}
|
|
|
|
static int __devexit qt1070_remove(struct i2c_client *client)
|
|
{
|
|
struct qt1070_data *data = i2c_get_clientdata(client);
|
|
|
|
/* Release IRQ */
|
|
free_irq(client->irq, data);
|
|
|
|
input_unregister_device(data->input);
|
|
kfree(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id qt1070_id[] = {
|
|
{ "qt1070", 0 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, qt1070_id);
|
|
|
|
static struct i2c_driver qt1070_driver = {
|
|
.driver = {
|
|
.name = "qt1070",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.id_table = qt1070_id,
|
|
.probe = qt1070_probe,
|
|
.remove = __devexit_p(qt1070_remove),
|
|
};
|
|
|
|
module_i2c_driver(qt1070_driver);
|
|
|
|
MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>");
|
|
MODULE_DESCRIPTION("Driver for AT42QT1070 QTouch sensor");
|
|
MODULE_LICENSE("GPL");
|