af901ca181
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2573 lines
75 KiB
C
2573 lines
75 KiB
C
/*
|
|
cx231xx_avcore.c - driver for Conexant Cx23100/101/102
|
|
USB video capture devices
|
|
|
|
Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
|
|
|
|
This program contains the specific code to control the avdecoder chip and
|
|
other related usb control functions for cx231xx based chipset.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/bitmap.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/mutex.h>
|
|
|
|
#include <media/v4l2-common.h>
|
|
#include <media/v4l2-ioctl.h>
|
|
#include <media/v4l2-chip-ident.h>
|
|
|
|
#include "cx231xx.h"
|
|
|
|
/******************************************************************************
|
|
-: BLOCK ARRANGEMENT :-
|
|
I2S block ----------------------|
|
|
[I2S audio] |
|
|
|
|
|
Analog Front End --> Direct IF -|-> Cx25840 --> Audio
|
|
[video & audio] | [Audio]
|
|
|
|
|
|-> Cx25840 --> Video
|
|
[Video]
|
|
|
|
*******************************************************************************/
|
|
|
|
/******************************************************************************
|
|
* A F E - B L O C K C O N T R O L functions *
|
|
* [ANALOG FRONT END] *
|
|
******************************************************************************/
|
|
static int afe_write_byte(struct cx231xx *dev, u16 saddr, u8 data)
|
|
{
|
|
return cx231xx_write_i2c_data(dev, AFE_DEVICE_ADDRESS,
|
|
saddr, 2, data, 1);
|
|
}
|
|
|
|
static int afe_read_byte(struct cx231xx *dev, u16 saddr, u8 *data)
|
|
{
|
|
int status;
|
|
u32 temp = 0;
|
|
|
|
status = cx231xx_read_i2c_data(dev, AFE_DEVICE_ADDRESS,
|
|
saddr, 2, &temp, 1);
|
|
*data = (u8) temp;
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_afe_init_super_block(struct cx231xx *dev, u32 ref_count)
|
|
{
|
|
int status = 0;
|
|
u8 temp = 0;
|
|
u8 afe_power_status = 0;
|
|
int i = 0;
|
|
|
|
/* super block initialize */
|
|
temp = (u8) (ref_count & 0xff);
|
|
status = afe_write_byte(dev, SUP_BLK_TUNE2, temp);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
status = afe_read_byte(dev, SUP_BLK_TUNE2, &afe_power_status);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
temp = (u8) ((ref_count & 0x300) >> 8);
|
|
temp |= 0x40;
|
|
status = afe_write_byte(dev, SUP_BLK_TUNE1, temp);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
status = afe_write_byte(dev, SUP_BLK_PLL2, 0x0f);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
/* enable pll */
|
|
while (afe_power_status != 0x18) {
|
|
status = afe_write_byte(dev, SUP_BLK_PWRDN, 0x18);
|
|
if (status < 0) {
|
|
cx231xx_info(
|
|
": Init Super Block failed in send cmd\n");
|
|
break;
|
|
}
|
|
|
|
status = afe_read_byte(dev, SUP_BLK_PWRDN, &afe_power_status);
|
|
afe_power_status &= 0xff;
|
|
if (status < 0) {
|
|
cx231xx_info(
|
|
": Init Super Block failed in receive cmd\n");
|
|
break;
|
|
}
|
|
i++;
|
|
if (i == 10) {
|
|
cx231xx_info(
|
|
": Init Super Block force break in loop !!!!\n");
|
|
status = -1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (status < 0)
|
|
return status;
|
|
|
|
/* start tuning filter */
|
|
status = afe_write_byte(dev, SUP_BLK_TUNE3, 0x40);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
msleep(5);
|
|
|
|
/* exit tuning */
|
|
status = afe_write_byte(dev, SUP_BLK_TUNE3, 0x00);
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_afe_init_channels(struct cx231xx *dev)
|
|
{
|
|
int status = 0;
|
|
|
|
/* power up all 3 channels, clear pd_buffer */
|
|
status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1, 0x00);
|
|
status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2, 0x00);
|
|
status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3, 0x00);
|
|
|
|
/* Enable quantizer calibration */
|
|
status = afe_write_byte(dev, ADC_COM_QUANT, 0x02);
|
|
|
|
/* channel initialize, force modulator (fb) reset */
|
|
status = afe_write_byte(dev, ADC_FB_FRCRST_CH1, 0x17);
|
|
status = afe_write_byte(dev, ADC_FB_FRCRST_CH2, 0x17);
|
|
status = afe_write_byte(dev, ADC_FB_FRCRST_CH3, 0x17);
|
|
|
|
/* start quantilizer calibration */
|
|
status = afe_write_byte(dev, ADC_CAL_ATEST_CH1, 0x10);
|
|
status = afe_write_byte(dev, ADC_CAL_ATEST_CH2, 0x10);
|
|
status = afe_write_byte(dev, ADC_CAL_ATEST_CH3, 0x10);
|
|
msleep(5);
|
|
|
|
/* exit modulator (fb) reset */
|
|
status = afe_write_byte(dev, ADC_FB_FRCRST_CH1, 0x07);
|
|
status = afe_write_byte(dev, ADC_FB_FRCRST_CH2, 0x07);
|
|
status = afe_write_byte(dev, ADC_FB_FRCRST_CH3, 0x07);
|
|
|
|
/* enable the pre_clamp in each channel for single-ended input */
|
|
status = afe_write_byte(dev, ADC_NTF_PRECLMP_EN_CH1, 0xf0);
|
|
status = afe_write_byte(dev, ADC_NTF_PRECLMP_EN_CH2, 0xf0);
|
|
status = afe_write_byte(dev, ADC_NTF_PRECLMP_EN_CH3, 0xf0);
|
|
|
|
/* use diode instead of resistor, so set term_en to 0, res_en to 0 */
|
|
status = cx231xx_reg_mask_write(dev, AFE_DEVICE_ADDRESS, 8,
|
|
ADC_QGAIN_RES_TRM_CH1, 3, 7, 0x00);
|
|
status = cx231xx_reg_mask_write(dev, AFE_DEVICE_ADDRESS, 8,
|
|
ADC_QGAIN_RES_TRM_CH2, 3, 7, 0x00);
|
|
status = cx231xx_reg_mask_write(dev, AFE_DEVICE_ADDRESS, 8,
|
|
ADC_QGAIN_RES_TRM_CH3, 3, 7, 0x00);
|
|
|
|
/* dynamic element matching off */
|
|
status = afe_write_byte(dev, ADC_DCSERVO_DEM_CH1, 0x03);
|
|
status = afe_write_byte(dev, ADC_DCSERVO_DEM_CH2, 0x03);
|
|
status = afe_write_byte(dev, ADC_DCSERVO_DEM_CH3, 0x03);
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_afe_setup_AFE_for_baseband(struct cx231xx *dev)
|
|
{
|
|
u8 c_value = 0;
|
|
int status = 0;
|
|
|
|
status = afe_read_byte(dev, ADC_PWRDN_CLAMP_CH2, &c_value);
|
|
c_value &= (~(0x50));
|
|
status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2, c_value);
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
The Analog Front End in Cx231xx has 3 channels. These
|
|
channels are used to share between different inputs
|
|
like tuner, s-video and composite inputs.
|
|
|
|
channel 1 ----- pin 1 to pin4(in reg is 1-4)
|
|
channel 2 ----- pin 5 to pin8(in reg is 5-8)
|
|
channel 3 ----- pin 9 to pin 12(in reg is 9-11)
|
|
*/
|
|
int cx231xx_afe_set_input_mux(struct cx231xx *dev, u32 input_mux)
|
|
{
|
|
u8 ch1_setting = (u8) input_mux;
|
|
u8 ch2_setting = (u8) (input_mux >> 8);
|
|
u8 ch3_setting = (u8) (input_mux >> 16);
|
|
int status = 0;
|
|
u8 value = 0;
|
|
|
|
if (ch1_setting != 0) {
|
|
status = afe_read_byte(dev, ADC_INPUT_CH1, &value);
|
|
value &= (!INPUT_SEL_MASK);
|
|
value |= (ch1_setting - 1) << 4;
|
|
value &= 0xff;
|
|
status = afe_write_byte(dev, ADC_INPUT_CH1, value);
|
|
}
|
|
|
|
if (ch2_setting != 0) {
|
|
status = afe_read_byte(dev, ADC_INPUT_CH2, &value);
|
|
value &= (!INPUT_SEL_MASK);
|
|
value |= (ch2_setting - 1) << 4;
|
|
value &= 0xff;
|
|
status = afe_write_byte(dev, ADC_INPUT_CH2, value);
|
|
}
|
|
|
|
/* For ch3_setting, the value to put in the register is
|
|
7 less than the input number */
|
|
if (ch3_setting != 0) {
|
|
status = afe_read_byte(dev, ADC_INPUT_CH3, &value);
|
|
value &= (!INPUT_SEL_MASK);
|
|
value |= (ch3_setting - 1) << 4;
|
|
value &= 0xff;
|
|
status = afe_write_byte(dev, ADC_INPUT_CH3, value);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_afe_set_mode(struct cx231xx *dev, enum AFE_MODE mode)
|
|
{
|
|
int status = 0;
|
|
|
|
/*
|
|
* FIXME: We need to implement the AFE code for LOW IF and for HI IF.
|
|
* Currently, only baseband works.
|
|
*/
|
|
|
|
switch (mode) {
|
|
case AFE_MODE_LOW_IF:
|
|
/* SetupAFEforLowIF(); */
|
|
break;
|
|
case AFE_MODE_BASEBAND:
|
|
status = cx231xx_afe_setup_AFE_for_baseband(dev);
|
|
break;
|
|
case AFE_MODE_EU_HI_IF:
|
|
/* SetupAFEforEuHiIF(); */
|
|
break;
|
|
case AFE_MODE_US_HI_IF:
|
|
/* SetupAFEforUsHiIF(); */
|
|
break;
|
|
case AFE_MODE_JAPAN_HI_IF:
|
|
/* SetupAFEforJapanHiIF(); */
|
|
break;
|
|
}
|
|
|
|
if ((mode != dev->afe_mode) &&
|
|
(dev->video_input == CX231XX_VMUX_TELEVISION))
|
|
status = cx231xx_afe_adjust_ref_count(dev,
|
|
CX231XX_VMUX_TELEVISION);
|
|
|
|
dev->afe_mode = mode;
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_afe_update_power_control(struct cx231xx *dev,
|
|
enum AV_MODE avmode)
|
|
{
|
|
u8 afe_power_status = 0;
|
|
int status = 0;
|
|
|
|
switch (dev->model) {
|
|
case CX231XX_BOARD_CNXT_RDE_250:
|
|
case CX231XX_BOARD_CNXT_RDU_250:
|
|
if (avmode == POLARIS_AVMODE_ANALOGT_TV) {
|
|
while (afe_power_status != (FLD_PWRDN_TUNING_BIAS |
|
|
FLD_PWRDN_ENABLE_PLL)) {
|
|
status = afe_write_byte(dev, SUP_BLK_PWRDN,
|
|
FLD_PWRDN_TUNING_BIAS |
|
|
FLD_PWRDN_ENABLE_PLL);
|
|
status |= afe_read_byte(dev, SUP_BLK_PWRDN,
|
|
&afe_power_status);
|
|
if (status < 0)
|
|
break;
|
|
}
|
|
|
|
status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1,
|
|
0x00);
|
|
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2,
|
|
0x00);
|
|
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3,
|
|
0x00);
|
|
} else if (avmode == POLARIS_AVMODE_DIGITAL) {
|
|
status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1,
|
|
0x70);
|
|
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2,
|
|
0x70);
|
|
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3,
|
|
0x70);
|
|
|
|
status |= afe_read_byte(dev, SUP_BLK_PWRDN,
|
|
&afe_power_status);
|
|
afe_power_status |= FLD_PWRDN_PD_BANDGAP |
|
|
FLD_PWRDN_PD_BIAS |
|
|
FLD_PWRDN_PD_TUNECK;
|
|
status |= afe_write_byte(dev, SUP_BLK_PWRDN,
|
|
afe_power_status);
|
|
} else if (avmode == POLARIS_AVMODE_ENXTERNAL_AV) {
|
|
while (afe_power_status != (FLD_PWRDN_TUNING_BIAS |
|
|
FLD_PWRDN_ENABLE_PLL)) {
|
|
status = afe_write_byte(dev, SUP_BLK_PWRDN,
|
|
FLD_PWRDN_TUNING_BIAS |
|
|
FLD_PWRDN_ENABLE_PLL);
|
|
status |= afe_read_byte(dev, SUP_BLK_PWRDN,
|
|
&afe_power_status);
|
|
if (status < 0)
|
|
break;
|
|
}
|
|
|
|
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1,
|
|
0x00);
|
|
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2,
|
|
0x00);
|
|
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3,
|
|
0x00);
|
|
} else {
|
|
cx231xx_info("Invalid AV mode input\n");
|
|
status = -1;
|
|
}
|
|
break;
|
|
default:
|
|
if (avmode == POLARIS_AVMODE_ANALOGT_TV) {
|
|
while (afe_power_status != (FLD_PWRDN_TUNING_BIAS |
|
|
FLD_PWRDN_ENABLE_PLL)) {
|
|
status = afe_write_byte(dev, SUP_BLK_PWRDN,
|
|
FLD_PWRDN_TUNING_BIAS |
|
|
FLD_PWRDN_ENABLE_PLL);
|
|
status |= afe_read_byte(dev, SUP_BLK_PWRDN,
|
|
&afe_power_status);
|
|
if (status < 0)
|
|
break;
|
|
}
|
|
|
|
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1,
|
|
0x40);
|
|
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2,
|
|
0x40);
|
|
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3,
|
|
0x00);
|
|
} else if (avmode == POLARIS_AVMODE_DIGITAL) {
|
|
status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1,
|
|
0x70);
|
|
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2,
|
|
0x70);
|
|
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3,
|
|
0x70);
|
|
|
|
status |= afe_read_byte(dev, SUP_BLK_PWRDN,
|
|
&afe_power_status);
|
|
afe_power_status |= FLD_PWRDN_PD_BANDGAP |
|
|
FLD_PWRDN_PD_BIAS |
|
|
FLD_PWRDN_PD_TUNECK;
|
|
status |= afe_write_byte(dev, SUP_BLK_PWRDN,
|
|
afe_power_status);
|
|
} else if (avmode == POLARIS_AVMODE_ENXTERNAL_AV) {
|
|
while (afe_power_status != (FLD_PWRDN_TUNING_BIAS |
|
|
FLD_PWRDN_ENABLE_PLL)) {
|
|
status = afe_write_byte(dev, SUP_BLK_PWRDN,
|
|
FLD_PWRDN_TUNING_BIAS |
|
|
FLD_PWRDN_ENABLE_PLL);
|
|
status |= afe_read_byte(dev, SUP_BLK_PWRDN,
|
|
&afe_power_status);
|
|
if (status < 0)
|
|
break;
|
|
}
|
|
|
|
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1,
|
|
0x00);
|
|
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2,
|
|
0x00);
|
|
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3,
|
|
0x40);
|
|
} else {
|
|
cx231xx_info("Invalid AV mode input\n");
|
|
status = -1;
|
|
}
|
|
} /* switch */
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_afe_adjust_ref_count(struct cx231xx *dev, u32 video_input)
|
|
{
|
|
u8 input_mode = 0;
|
|
u8 ntf_mode = 0;
|
|
int status = 0;
|
|
|
|
dev->video_input = video_input;
|
|
|
|
if (video_input == CX231XX_VMUX_TELEVISION) {
|
|
status = afe_read_byte(dev, ADC_INPUT_CH3, &input_mode);
|
|
status = afe_read_byte(dev, ADC_NTF_PRECLMP_EN_CH3,
|
|
&ntf_mode);
|
|
} else {
|
|
status = afe_read_byte(dev, ADC_INPUT_CH1, &input_mode);
|
|
status = afe_read_byte(dev, ADC_NTF_PRECLMP_EN_CH1,
|
|
&ntf_mode);
|
|
}
|
|
|
|
input_mode = (ntf_mode & 0x3) | ((input_mode & 0x6) << 1);
|
|
|
|
switch (input_mode) {
|
|
case SINGLE_ENDED:
|
|
dev->afe_ref_count = 0x23C;
|
|
break;
|
|
case LOW_IF:
|
|
dev->afe_ref_count = 0x24C;
|
|
break;
|
|
case EU_IF:
|
|
dev->afe_ref_count = 0x258;
|
|
break;
|
|
case US_IF:
|
|
dev->afe_ref_count = 0x260;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
status = cx231xx_afe_init_super_block(dev, dev->afe_ref_count);
|
|
|
|
return status;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* V I D E O / A U D I O D E C O D E R C O N T R O L functions *
|
|
******************************************************************************/
|
|
static int vid_blk_write_byte(struct cx231xx *dev, u16 saddr, u8 data)
|
|
{
|
|
return cx231xx_write_i2c_data(dev, VID_BLK_I2C_ADDRESS,
|
|
saddr, 2, data, 1);
|
|
}
|
|
|
|
static int vid_blk_read_byte(struct cx231xx *dev, u16 saddr, u8 *data)
|
|
{
|
|
int status;
|
|
u32 temp = 0;
|
|
|
|
status = cx231xx_read_i2c_data(dev, VID_BLK_I2C_ADDRESS,
|
|
saddr, 2, &temp, 1);
|
|
*data = (u8) temp;
|
|
return status;
|
|
}
|
|
|
|
static int vid_blk_write_word(struct cx231xx *dev, u16 saddr, u32 data)
|
|
{
|
|
return cx231xx_write_i2c_data(dev, VID_BLK_I2C_ADDRESS,
|
|
saddr, 2, data, 4);
|
|
}
|
|
|
|
static int vid_blk_read_word(struct cx231xx *dev, u16 saddr, u32 *data)
|
|
{
|
|
return cx231xx_read_i2c_data(dev, VID_BLK_I2C_ADDRESS,
|
|
saddr, 2, data, 4);
|
|
}
|
|
|
|
int cx231xx_set_video_input_mux(struct cx231xx *dev, u8 input)
|
|
{
|
|
int status = 0;
|
|
|
|
switch (INPUT(input)->type) {
|
|
case CX231XX_VMUX_COMPOSITE1:
|
|
case CX231XX_VMUX_SVIDEO:
|
|
if ((dev->current_pcb_config.type == USB_BUS_POWER) &&
|
|
(dev->power_mode != POLARIS_AVMODE_ENXTERNAL_AV)) {
|
|
/* External AV */
|
|
status = cx231xx_set_power_mode(dev,
|
|
POLARIS_AVMODE_ENXTERNAL_AV);
|
|
if (status < 0) {
|
|
cx231xx_errdev("%s: set_power_mode : Failed to"
|
|
" set Power - errCode [%d]!\n",
|
|
__func__, status);
|
|
return status;
|
|
}
|
|
}
|
|
status = cx231xx_set_decoder_video_input(dev,
|
|
INPUT(input)->type,
|
|
INPUT(input)->vmux);
|
|
break;
|
|
case CX231XX_VMUX_TELEVISION:
|
|
case CX231XX_VMUX_CABLE:
|
|
if ((dev->current_pcb_config.type == USB_BUS_POWER) &&
|
|
(dev->power_mode != POLARIS_AVMODE_ANALOGT_TV)) {
|
|
/* Tuner */
|
|
status = cx231xx_set_power_mode(dev,
|
|
POLARIS_AVMODE_ANALOGT_TV);
|
|
if (status < 0) {
|
|
cx231xx_errdev("%s: set_power_mode:Failed"
|
|
" to set Power - errCode [%d]!\n",
|
|
__func__, status);
|
|
return status;
|
|
}
|
|
}
|
|
status = cx231xx_set_decoder_video_input(dev,
|
|
CX231XX_VMUX_COMPOSITE1,
|
|
INPUT(input)->vmux);
|
|
break;
|
|
default:
|
|
cx231xx_errdev("%s: set_power_mode : Unknown Input %d !\n",
|
|
__func__, INPUT(input)->type);
|
|
break;
|
|
}
|
|
|
|
/* save the selection */
|
|
dev->video_input = input;
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_set_decoder_video_input(struct cx231xx *dev,
|
|
u8 pin_type, u8 input)
|
|
{
|
|
int status = 0;
|
|
u32 value = 0;
|
|
|
|
if (pin_type != dev->video_input) {
|
|
status = cx231xx_afe_adjust_ref_count(dev, pin_type);
|
|
if (status < 0) {
|
|
cx231xx_errdev("%s: adjust_ref_count :Failed to set"
|
|
"AFE input mux - errCode [%d]!\n",
|
|
__func__, status);
|
|
return status;
|
|
}
|
|
}
|
|
|
|
/* call afe block to set video inputs */
|
|
status = cx231xx_afe_set_input_mux(dev, input);
|
|
if (status < 0) {
|
|
cx231xx_errdev("%s: set_input_mux :Failed to set"
|
|
" AFE input mux - errCode [%d]!\n",
|
|
__func__, status);
|
|
return status;
|
|
}
|
|
|
|
switch (pin_type) {
|
|
case CX231XX_VMUX_COMPOSITE1:
|
|
status = vid_blk_read_word(dev, AFE_CTRL, &value);
|
|
value |= (0 << 13) | (1 << 4);
|
|
value &= ~(1 << 5);
|
|
|
|
/* set [24:23] [22:15] to 0 */
|
|
value &= (~(0x1ff8000));
|
|
/* set FUNC_MODE[24:23] = 2 IF_MOD[22:15] = 0 */
|
|
value |= 0x1000000;
|
|
status = vid_blk_write_word(dev, AFE_CTRL, value);
|
|
|
|
status = vid_blk_read_word(dev, OUT_CTRL1, &value);
|
|
value |= (1 << 7);
|
|
status = vid_blk_write_word(dev, OUT_CTRL1, value);
|
|
|
|
/* Set vip 1.1 output mode */
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
OUT_CTRL1,
|
|
FLD_OUT_MODE,
|
|
OUT_MODE_VIP11);
|
|
|
|
/* Tell DIF object to go to baseband mode */
|
|
status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
|
|
if (status < 0) {
|
|
cx231xx_errdev("%s: cx231xx_dif set to By pass"
|
|
" mode- errCode [%d]!\n",
|
|
__func__, status);
|
|
return status;
|
|
}
|
|
|
|
/* Read the DFE_CTRL1 register */
|
|
status = vid_blk_read_word(dev, DFE_CTRL1, &value);
|
|
|
|
/* enable the VBI_GATE_EN */
|
|
value |= FLD_VBI_GATE_EN;
|
|
|
|
/* Enable the auto-VGA enable */
|
|
value |= FLD_VGA_AUTO_EN;
|
|
|
|
/* Write it back */
|
|
status = vid_blk_write_word(dev, DFE_CTRL1, value);
|
|
|
|
/* Disable auto config of registers */
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
MODE_CTRL, FLD_ACFG_DIS,
|
|
cx231xx_set_field(FLD_ACFG_DIS, 1));
|
|
|
|
/* Set CVBS input mode */
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
MODE_CTRL, FLD_INPUT_MODE,
|
|
cx231xx_set_field(FLD_INPUT_MODE, INPUT_MODE_CVBS_0));
|
|
break;
|
|
case CX231XX_VMUX_SVIDEO:
|
|
/* Disable the use of DIF */
|
|
|
|
status = vid_blk_read_word(dev, AFE_CTRL, &value);
|
|
|
|
/* set [24:23] [22:15] to 0 */
|
|
value &= (~(0x1ff8000));
|
|
/* set FUNC_MODE[24:23] = 2
|
|
IF_MOD[22:15] = 0 DCR_BYP_CH2[4:4] = 1; */
|
|
value |= 0x1000010;
|
|
status = vid_blk_write_word(dev, AFE_CTRL, value);
|
|
|
|
/* Tell DIF object to go to baseband mode */
|
|
status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
|
|
if (status < 0) {
|
|
cx231xx_errdev("%s: cx231xx_dif set to By pass"
|
|
" mode- errCode [%d]!\n",
|
|
__func__, status);
|
|
return status;
|
|
}
|
|
|
|
/* Read the DFE_CTRL1 register */
|
|
status = vid_blk_read_word(dev, DFE_CTRL1, &value);
|
|
|
|
/* enable the VBI_GATE_EN */
|
|
value |= FLD_VBI_GATE_EN;
|
|
|
|
/* Enable the auto-VGA enable */
|
|
value |= FLD_VGA_AUTO_EN;
|
|
|
|
/* Write it back */
|
|
status = vid_blk_write_word(dev, DFE_CTRL1, value);
|
|
|
|
/* Disable auto config of registers */
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
MODE_CTRL, FLD_ACFG_DIS,
|
|
cx231xx_set_field(FLD_ACFG_DIS, 1));
|
|
|
|
/* Set YC input mode */
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
MODE_CTRL,
|
|
FLD_INPUT_MODE,
|
|
cx231xx_set_field(FLD_INPUT_MODE, INPUT_MODE_YC_1));
|
|
|
|
/* Chroma to ADC2 */
|
|
status = vid_blk_read_word(dev, AFE_CTRL, &value);
|
|
value |= FLD_CHROMA_IN_SEL; /* set the chroma in select */
|
|
|
|
/* Clear VGA_SEL_CH2 and VGA_SEL_CH3 (bits 7 and 8)
|
|
This sets them to use video
|
|
rather than audio. Only one of the two will be in use. */
|
|
value &= ~(FLD_VGA_SEL_CH2 | FLD_VGA_SEL_CH3);
|
|
|
|
status = vid_blk_write_word(dev, AFE_CTRL, value);
|
|
|
|
status = cx231xx_afe_set_mode(dev, AFE_MODE_BASEBAND);
|
|
break;
|
|
case CX231XX_VMUX_TELEVISION:
|
|
case CX231XX_VMUX_CABLE:
|
|
default:
|
|
switch (dev->model) {
|
|
case CX231XX_BOARD_CNXT_RDE_250:
|
|
case CX231XX_BOARD_CNXT_RDU_250:
|
|
/* Disable the use of DIF */
|
|
|
|
status = vid_blk_read_word(dev, AFE_CTRL, &value);
|
|
value |= (0 << 13) | (1 << 4);
|
|
value &= ~(1 << 5);
|
|
|
|
/* set [24:23] [22:15] to 0 */
|
|
value &= (~(0x1FF8000));
|
|
/* set FUNC_MODE[24:23] = 2 IF_MOD[22:15] = 0 */
|
|
value |= 0x1000000;
|
|
status = vid_blk_write_word(dev, AFE_CTRL, value);
|
|
|
|
status = vid_blk_read_word(dev, OUT_CTRL1, &value);
|
|
value |= (1 << 7);
|
|
status = vid_blk_write_word(dev, OUT_CTRL1, value);
|
|
|
|
/* Set vip 1.1 output mode */
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
OUT_CTRL1, FLD_OUT_MODE,
|
|
OUT_MODE_VIP11);
|
|
|
|
/* Tell DIF object to go to baseband mode */
|
|
status = cx231xx_dif_set_standard(dev,
|
|
DIF_USE_BASEBAND);
|
|
if (status < 0) {
|
|
cx231xx_errdev("%s: cx231xx_dif set to By pass"
|
|
" mode- errCode [%d]!\n",
|
|
__func__, status);
|
|
return status;
|
|
}
|
|
|
|
/* Read the DFE_CTRL1 register */
|
|
status = vid_blk_read_word(dev, DFE_CTRL1, &value);
|
|
|
|
/* enable the VBI_GATE_EN */
|
|
value |= FLD_VBI_GATE_EN;
|
|
|
|
/* Enable the auto-VGA enable */
|
|
value |= FLD_VGA_AUTO_EN;
|
|
|
|
/* Write it back */
|
|
status = vid_blk_write_word(dev, DFE_CTRL1, value);
|
|
|
|
/* Disable auto config of registers */
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
MODE_CTRL, FLD_ACFG_DIS,
|
|
cx231xx_set_field(FLD_ACFG_DIS, 1));
|
|
|
|
/* Set CVBS input mode */
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
MODE_CTRL, FLD_INPUT_MODE,
|
|
cx231xx_set_field(FLD_INPUT_MODE,
|
|
INPUT_MODE_CVBS_0));
|
|
break;
|
|
default:
|
|
/* Enable the DIF for the tuner */
|
|
|
|
/* Reinitialize the DIF */
|
|
status = cx231xx_dif_set_standard(dev, dev->norm);
|
|
if (status < 0) {
|
|
cx231xx_errdev("%s: cx231xx_dif set to By pass"
|
|
" mode- errCode [%d]!\n",
|
|
__func__, status);
|
|
return status;
|
|
}
|
|
|
|
/* Make sure bypass is cleared */
|
|
status = vid_blk_read_word(dev, DIF_MISC_CTRL, &value);
|
|
|
|
/* Clear the bypass bit */
|
|
value &= ~FLD_DIF_DIF_BYPASS;
|
|
|
|
/* Enable the use of the DIF block */
|
|
status = vid_blk_write_word(dev, DIF_MISC_CTRL, value);
|
|
|
|
/* Read the DFE_CTRL1 register */
|
|
status = vid_blk_read_word(dev, DFE_CTRL1, &value);
|
|
|
|
/* Disable the VBI_GATE_EN */
|
|
value &= ~FLD_VBI_GATE_EN;
|
|
|
|
/* Enable the auto-VGA enable, AGC, and
|
|
set the skip count to 2 */
|
|
value |= FLD_VGA_AUTO_EN | FLD_AGC_AUTO_EN | 0x00200000;
|
|
|
|
/* Write it back */
|
|
status = vid_blk_write_word(dev, DFE_CTRL1, value);
|
|
|
|
/* Wait until AGC locks up */
|
|
msleep(1);
|
|
|
|
/* Disable the auto-VGA enable AGC */
|
|
value &= ~(FLD_VGA_AUTO_EN);
|
|
|
|
/* Write it back */
|
|
status = vid_blk_write_word(dev, DFE_CTRL1, value);
|
|
|
|
/* Enable Polaris B0 AGC output */
|
|
status = vid_blk_read_word(dev, PIN_CTRL, &value);
|
|
value |= (FLD_OEF_AGC_RF) |
|
|
(FLD_OEF_AGC_IFVGA) |
|
|
(FLD_OEF_AGC_IF);
|
|
status = vid_blk_write_word(dev, PIN_CTRL, value);
|
|
|
|
/* Set vip 1.1 output mode */
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
OUT_CTRL1, FLD_OUT_MODE,
|
|
OUT_MODE_VIP11);
|
|
|
|
/* Disable auto config of registers */
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
MODE_CTRL, FLD_ACFG_DIS,
|
|
cx231xx_set_field(FLD_ACFG_DIS, 1));
|
|
|
|
/* Set CVBS input mode */
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
MODE_CTRL, FLD_INPUT_MODE,
|
|
cx231xx_set_field(FLD_INPUT_MODE,
|
|
INPUT_MODE_CVBS_0));
|
|
|
|
/* Set some bits in AFE_CTRL so that channel 2 or 3
|
|
* is ready to receive audio */
|
|
/* Clear clamp for channels 2 and 3 (bit 16-17) */
|
|
/* Clear droop comp (bit 19-20) */
|
|
/* Set VGA_SEL (for audio control) (bit 7-8) */
|
|
status = vid_blk_read_word(dev, AFE_CTRL, &value);
|
|
|
|
value |= FLD_VGA_SEL_CH3 | FLD_VGA_SEL_CH2;
|
|
|
|
status = vid_blk_write_word(dev, AFE_CTRL, value);
|
|
break;
|
|
|
|
}
|
|
break;
|
|
}
|
|
|
|
/* Set raw VBI mode */
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
OUT_CTRL1, FLD_VBIHACTRAW_EN,
|
|
cx231xx_set_field(FLD_VBIHACTRAW_EN, 1));
|
|
|
|
status = vid_blk_read_word(dev, OUT_CTRL1, &value);
|
|
if (value & 0x02) {
|
|
value |= (1 << 19);
|
|
status = vid_blk_write_word(dev, OUT_CTRL1, value);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* Handle any video-mode specific overrides that are different
|
|
* on a per video standards basis after touching the MODE_CTRL
|
|
* register which resets many values for autodetect
|
|
*/
|
|
int cx231xx_do_mode_ctrl_overrides(struct cx231xx *dev)
|
|
{
|
|
int status = 0;
|
|
|
|
cx231xx_info("do_mode_ctrl_overrides : 0x%x\n",
|
|
(unsigned int)dev->norm);
|
|
|
|
/* Change the DFE_CTRL3 bp_percent to fix flagging */
|
|
status = vid_blk_write_word(dev, DFE_CTRL3, 0xCD3F0280);
|
|
|
|
if (dev->norm & (V4L2_STD_NTSC | V4L2_STD_PAL_M)) {
|
|
cx231xx_info("do_mode_ctrl_overrides NTSC\n");
|
|
|
|
/* Move the close caption lines out of active video,
|
|
adjust the active video start point */
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
VERT_TIM_CTRL,
|
|
FLD_VBLANK_CNT, 0x18);
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
VERT_TIM_CTRL,
|
|
FLD_VACTIVE_CNT,
|
|
0x1E6000);
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
VERT_TIM_CTRL,
|
|
FLD_V656BLANK_CNT,
|
|
0x1E000000);
|
|
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
HORIZ_TIM_CTRL,
|
|
FLD_HBLANK_CNT,
|
|
cx231xx_set_field
|
|
(FLD_HBLANK_CNT, 0x79));
|
|
} else if (dev->norm & V4L2_STD_SECAM) {
|
|
cx231xx_info("do_mode_ctrl_overrides SECAM\n");
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
VERT_TIM_CTRL,
|
|
FLD_VBLANK_CNT, 0x24);
|
|
/* Adjust the active video horizontal start point */
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
HORIZ_TIM_CTRL,
|
|
FLD_HBLANK_CNT,
|
|
cx231xx_set_field
|
|
(FLD_HBLANK_CNT, 0x85));
|
|
} else {
|
|
cx231xx_info("do_mode_ctrl_overrides PAL\n");
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
VERT_TIM_CTRL,
|
|
FLD_VBLANK_CNT, 0x24);
|
|
/* Adjust the active video horizontal start point */
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
HORIZ_TIM_CTRL,
|
|
FLD_HBLANK_CNT,
|
|
cx231xx_set_field
|
|
(FLD_HBLANK_CNT, 0x85));
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_set_audio_input(struct cx231xx *dev, u8 input)
|
|
{
|
|
int status = 0;
|
|
enum AUDIO_INPUT ainput = AUDIO_INPUT_LINE;
|
|
|
|
switch (INPUT(input)->amux) {
|
|
case CX231XX_AMUX_VIDEO:
|
|
ainput = AUDIO_INPUT_TUNER_TV;
|
|
break;
|
|
case CX231XX_AMUX_LINE_IN:
|
|
status = cx231xx_i2s_blk_set_audio_input(dev, input);
|
|
ainput = AUDIO_INPUT_LINE;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
status = cx231xx_set_audio_decoder_input(dev, ainput);
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_set_audio_decoder_input(struct cx231xx *dev,
|
|
enum AUDIO_INPUT audio_input)
|
|
{
|
|
u32 dwval;
|
|
int status;
|
|
u8 gen_ctrl;
|
|
u32 value = 0;
|
|
|
|
/* Put it in soft reset */
|
|
status = vid_blk_read_byte(dev, GENERAL_CTL, &gen_ctrl);
|
|
gen_ctrl |= 1;
|
|
status = vid_blk_write_byte(dev, GENERAL_CTL, gen_ctrl);
|
|
|
|
switch (audio_input) {
|
|
case AUDIO_INPUT_LINE:
|
|
/* setup AUD_IO control from Merlin paralle output */
|
|
value = cx231xx_set_field(FLD_AUD_CHAN1_SRC,
|
|
AUD_CHAN_SRC_PARALLEL);
|
|
status = vid_blk_write_word(dev, AUD_IO_CTRL, value);
|
|
|
|
/* setup input to Merlin, SRC2 connect to AC97
|
|
bypass upsample-by-2, slave mode, sony mode, left justify
|
|
adr 091c, dat 01000000 */
|
|
status = vid_blk_read_word(dev, AC97_CTL, &dwval);
|
|
|
|
status = vid_blk_write_word(dev, AC97_CTL,
|
|
(dwval | FLD_AC97_UP2X_BYPASS));
|
|
|
|
/* select the parallel1 and SRC3 */
|
|
status = vid_blk_write_word(dev, BAND_OUT_SEL,
|
|
cx231xx_set_field(FLD_SRC3_IN_SEL, 0x0) |
|
|
cx231xx_set_field(FLD_SRC3_CLK_SEL, 0x0) |
|
|
cx231xx_set_field(FLD_PARALLEL1_SRC_SEL, 0x0));
|
|
|
|
/* unmute all, AC97 in, independence mode
|
|
adr 08d0, data 0x00063073 */
|
|
status = vid_blk_write_word(dev, PATH1_CTL1, 0x00063073);
|
|
|
|
/* set AVC maximum threshold, adr 08d4, dat ffff0024 */
|
|
status = vid_blk_read_word(dev, PATH1_VOL_CTL, &dwval);
|
|
status = vid_blk_write_word(dev, PATH1_VOL_CTL,
|
|
(dwval | FLD_PATH1_AVC_THRESHOLD));
|
|
|
|
/* set SC maximum threshold, adr 08ec, dat ffffb3a3 */
|
|
status = vid_blk_read_word(dev, PATH1_SC_CTL, &dwval);
|
|
status = vid_blk_write_word(dev, PATH1_SC_CTL,
|
|
(dwval | FLD_PATH1_SC_THRESHOLD));
|
|
break;
|
|
|
|
case AUDIO_INPUT_TUNER_TV:
|
|
default:
|
|
|
|
/* Setup SRC sources and clocks */
|
|
status = vid_blk_write_word(dev, BAND_OUT_SEL,
|
|
cx231xx_set_field(FLD_SRC6_IN_SEL, 0x00) |
|
|
cx231xx_set_field(FLD_SRC6_CLK_SEL, 0x01) |
|
|
cx231xx_set_field(FLD_SRC5_IN_SEL, 0x00) |
|
|
cx231xx_set_field(FLD_SRC5_CLK_SEL, 0x02) |
|
|
cx231xx_set_field(FLD_SRC4_IN_SEL, 0x02) |
|
|
cx231xx_set_field(FLD_SRC4_CLK_SEL, 0x03) |
|
|
cx231xx_set_field(FLD_SRC3_IN_SEL, 0x00) |
|
|
cx231xx_set_field(FLD_SRC3_CLK_SEL, 0x00) |
|
|
cx231xx_set_field(FLD_BASEBAND_BYPASS_CTL, 0x00) |
|
|
cx231xx_set_field(FLD_AC97_SRC_SEL, 0x03) |
|
|
cx231xx_set_field(FLD_I2S_SRC_SEL, 0x00) |
|
|
cx231xx_set_field(FLD_PARALLEL2_SRC_SEL, 0x02) |
|
|
cx231xx_set_field(FLD_PARALLEL1_SRC_SEL, 0x01));
|
|
|
|
/* Setup the AUD_IO control */
|
|
status = vid_blk_write_word(dev, AUD_IO_CTRL,
|
|
cx231xx_set_field(FLD_I2S_PORT_DIR, 0x00) |
|
|
cx231xx_set_field(FLD_I2S_OUT_SRC, 0x00) |
|
|
cx231xx_set_field(FLD_AUD_CHAN3_SRC, 0x00) |
|
|
cx231xx_set_field(FLD_AUD_CHAN2_SRC, 0x00) |
|
|
cx231xx_set_field(FLD_AUD_CHAN1_SRC, 0x03));
|
|
|
|
status = vid_blk_write_word(dev, PATH1_CTL1, 0x1F063870);
|
|
|
|
/* setAudioStandard(_audio_standard); */
|
|
|
|
status = vid_blk_write_word(dev, PATH1_CTL1, 0x00063870);
|
|
switch (dev->model) {
|
|
case CX231XX_BOARD_CNXT_RDE_250:
|
|
case CX231XX_BOARD_CNXT_RDU_250:
|
|
status = cx231xx_read_modify_write_i2c_dword(dev,
|
|
VID_BLK_I2C_ADDRESS,
|
|
CHIP_CTRL,
|
|
FLD_SIF_EN,
|
|
cx231xx_set_field(FLD_SIF_EN, 1));
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case AUDIO_INPUT_TUNER_FM:
|
|
/* use SIF for FM radio
|
|
setupFM();
|
|
setAudioStandard(_audio_standard);
|
|
*/
|
|
break;
|
|
|
|
case AUDIO_INPUT_MUTE:
|
|
status = vid_blk_write_word(dev, PATH1_CTL1, 0x1F011012);
|
|
break;
|
|
}
|
|
|
|
/* Take it out of soft reset */
|
|
status = vid_blk_read_byte(dev, GENERAL_CTL, &gen_ctrl);
|
|
gen_ctrl &= ~1;
|
|
status = vid_blk_write_byte(dev, GENERAL_CTL, gen_ctrl);
|
|
|
|
return status;
|
|
}
|
|
|
|
/* Set resolution of the video */
|
|
int cx231xx_resolution_set(struct cx231xx *dev)
|
|
{
|
|
/* set horzontal scale */
|
|
int status = vid_blk_write_word(dev, HSCALE_CTRL, dev->hscale);
|
|
if (status)
|
|
return status;
|
|
|
|
/* set vertical scale */
|
|
return vid_blk_write_word(dev, VSCALE_CTRL, dev->vscale);
|
|
}
|
|
|
|
/******************************************************************************
|
|
* C H I P Specific C O N T R O L functions *
|
|
******************************************************************************/
|
|
int cx231xx_init_ctrl_pin_status(struct cx231xx *dev)
|
|
{
|
|
u32 value;
|
|
int status = 0;
|
|
|
|
status = vid_blk_read_word(dev, PIN_CTRL, &value);
|
|
value |= (~dev->board.ctl_pin_status_mask);
|
|
status = vid_blk_write_word(dev, PIN_CTRL, value);
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_set_agc_analog_digital_mux_select(struct cx231xx *dev,
|
|
u8 analog_or_digital)
|
|
{
|
|
int status = 0;
|
|
|
|
/* first set the direction to output */
|
|
status = cx231xx_set_gpio_direction(dev,
|
|
dev->board.
|
|
agc_analog_digital_select_gpio, 1);
|
|
|
|
/* 0 - demod ; 1 - Analog mode */
|
|
status = cx231xx_set_gpio_value(dev,
|
|
dev->board.agc_analog_digital_select_gpio,
|
|
analog_or_digital);
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_enable_i2c_for_tuner(struct cx231xx *dev, u8 I2CIndex)
|
|
{
|
|
u8 value[4] = { 0, 0, 0, 0 };
|
|
int status = 0;
|
|
|
|
cx231xx_info("Changing the i2c port for tuner to %d\n", I2CIndex);
|
|
|
|
status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER,
|
|
PWR_CTL_EN, value, 4);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
if (I2CIndex == I2C_1) {
|
|
if (value[0] & I2C_DEMOD_EN) {
|
|
value[0] &= ~I2C_DEMOD_EN;
|
|
status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
|
|
PWR_CTL_EN, value, 4);
|
|
}
|
|
} else {
|
|
if (!(value[0] & I2C_DEMOD_EN)) {
|
|
value[0] |= I2C_DEMOD_EN;
|
|
status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
|
|
PWR_CTL_EN, value, 4);
|
|
}
|
|
}
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
/******************************************************************************
|
|
* D I F - B L O C K C O N T R O L functions *
|
|
******************************************************************************/
|
|
int cx231xx_dif_configure_C2HH_for_low_IF(struct cx231xx *dev, u32 mode,
|
|
u32 function_mode, u32 standard)
|
|
{
|
|
int status = 0;
|
|
|
|
if (mode == V4L2_TUNER_RADIO) {
|
|
/* C2HH */
|
|
/* lo if big signal */
|
|
status = cx231xx_reg_mask_write(dev,
|
|
VID_BLK_I2C_ADDRESS, 32,
|
|
AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1);
|
|
/* FUNC_MODE = DIF */
|
|
status = cx231xx_reg_mask_write(dev,
|
|
VID_BLK_I2C_ADDRESS, 32,
|
|
AFE_CTRL_C2HH_SRC_CTRL, 23, 24, function_mode);
|
|
/* IF_MODE */
|
|
status = cx231xx_reg_mask_write(dev,
|
|
VID_BLK_I2C_ADDRESS, 32,
|
|
AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xFF);
|
|
/* no inv */
|
|
status = cx231xx_reg_mask_write(dev,
|
|
VID_BLK_I2C_ADDRESS, 32,
|
|
AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1);
|
|
} else if (standard != DIF_USE_BASEBAND) {
|
|
if (standard & V4L2_STD_MN) {
|
|
/* lo if big signal */
|
|
status = cx231xx_reg_mask_write(dev,
|
|
VID_BLK_I2C_ADDRESS, 32,
|
|
AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1);
|
|
/* FUNC_MODE = DIF */
|
|
status = cx231xx_reg_mask_write(dev,
|
|
VID_BLK_I2C_ADDRESS, 32,
|
|
AFE_CTRL_C2HH_SRC_CTRL, 23, 24,
|
|
function_mode);
|
|
/* IF_MODE */
|
|
status = cx231xx_reg_mask_write(dev,
|
|
VID_BLK_I2C_ADDRESS, 32,
|
|
AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xb);
|
|
/* no inv */
|
|
status = cx231xx_reg_mask_write(dev,
|
|
VID_BLK_I2C_ADDRESS, 32,
|
|
AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1);
|
|
/* 0x124, AUD_CHAN1_SRC = 0x3 */
|
|
status = cx231xx_reg_mask_write(dev,
|
|
VID_BLK_I2C_ADDRESS, 32,
|
|
AUD_IO_CTRL, 0, 31, 0x00000003);
|
|
} else if ((standard == V4L2_STD_PAL_I) |
|
|
(standard & V4L2_STD_SECAM)) {
|
|
/* C2HH setup */
|
|
/* lo if big signal */
|
|
status = cx231xx_reg_mask_write(dev,
|
|
VID_BLK_I2C_ADDRESS, 32,
|
|
AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1);
|
|
/* FUNC_MODE = DIF */
|
|
status = cx231xx_reg_mask_write(dev,
|
|
VID_BLK_I2C_ADDRESS, 32,
|
|
AFE_CTRL_C2HH_SRC_CTRL, 23, 24,
|
|
function_mode);
|
|
/* IF_MODE */
|
|
status = cx231xx_reg_mask_write(dev,
|
|
VID_BLK_I2C_ADDRESS, 32,
|
|
AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xF);
|
|
/* no inv */
|
|
status = cx231xx_reg_mask_write(dev,
|
|
VID_BLK_I2C_ADDRESS, 32,
|
|
AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1);
|
|
} else {
|
|
/* default PAL BG */
|
|
/* C2HH setup */
|
|
/* lo if big signal */
|
|
status = cx231xx_reg_mask_write(dev,
|
|
VID_BLK_I2C_ADDRESS, 32,
|
|
AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1);
|
|
/* FUNC_MODE = DIF */
|
|
status = cx231xx_reg_mask_write(dev,
|
|
VID_BLK_I2C_ADDRESS, 32,
|
|
AFE_CTRL_C2HH_SRC_CTRL, 23, 24,
|
|
function_mode);
|
|
/* IF_MODE */
|
|
status = cx231xx_reg_mask_write(dev,
|
|
VID_BLK_I2C_ADDRESS, 32,
|
|
AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xE);
|
|
/* no inv */
|
|
status = cx231xx_reg_mask_write(dev,
|
|
VID_BLK_I2C_ADDRESS, 32,
|
|
AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1);
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_dif_set_standard(struct cx231xx *dev, u32 standard)
|
|
{
|
|
int status = 0;
|
|
u32 dif_misc_ctrl_value = 0;
|
|
u32 func_mode = 0;
|
|
|
|
cx231xx_info("%s: setStandard to %x\n", __func__, standard);
|
|
|
|
status = vid_blk_read_word(dev, DIF_MISC_CTRL, &dif_misc_ctrl_value);
|
|
if (standard != DIF_USE_BASEBAND)
|
|
dev->norm = standard;
|
|
|
|
switch (dev->model) {
|
|
case CX231XX_BOARD_CNXT_RDE_250:
|
|
case CX231XX_BOARD_CNXT_RDU_250:
|
|
func_mode = 0x03;
|
|
break;
|
|
default:
|
|
func_mode = 0x01;
|
|
}
|
|
|
|
status = cx231xx_dif_configure_C2HH_for_low_IF(dev, dev->active_mode,
|
|
func_mode, standard);
|
|
|
|
if (standard == DIF_USE_BASEBAND) { /* base band */
|
|
/* There is a different SRC_PHASE_INC value
|
|
for baseband vs. DIF */
|
|
status = vid_blk_write_word(dev, DIF_SRC_PHASE_INC, 0xDF7DF83);
|
|
status = vid_blk_read_word(dev, DIF_MISC_CTRL,
|
|
&dif_misc_ctrl_value);
|
|
dif_misc_ctrl_value |= FLD_DIF_DIF_BYPASS;
|
|
status = vid_blk_write_word(dev, DIF_MISC_CTRL,
|
|
dif_misc_ctrl_value);
|
|
} else if (standard & V4L2_STD_PAL_D) {
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_PLL_CTRL, 0, 31, 0x6503bc0c);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_PLL_CTRL1, 0, 31, 0xbd038c85);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_PLL_CTRL2, 0, 31, 0x1db4640a);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_PLL_CTRL3, 0, 31, 0x00008800);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_IF_REF, 0, 31, 0x444C1380);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_CTRL_IF, 0, 31, 0xDA302600);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_CTRL_INT, 0, 31, 0xDA261700);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_CTRL_RF, 0, 31, 0xDA262600);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_IF_INT_CURRENT, 0, 31,
|
|
0x26001700);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_RF_CURRENT, 0, 31,
|
|
0x00002660);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_VIDEO_AGC_CTRL, 0, 31,
|
|
0x72500800);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_VID_AUD_OVERRIDE, 0, 31,
|
|
0x27000100);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AV_SEP_CTRL, 0, 31, 0x3F3934EA);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_COMP_FLT_CTRL, 0, 31,
|
|
0x00000000);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_SRC_PHASE_INC, 0, 31,
|
|
0x1befbf06);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_SRC_GAIN_CONTROL, 0, 31,
|
|
0x000035e8);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_RPT_VARIANCE, 0, 31, 0x00000000);
|
|
/* Save the Spec Inversion value */
|
|
dif_misc_ctrl_value &= FLD_DIF_SPEC_INV;
|
|
dif_misc_ctrl_value |= 0x3a023F11;
|
|
} else if (standard & V4L2_STD_PAL_I) {
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_PLL_CTRL, 0, 31, 0x6503bc0c);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_PLL_CTRL1, 0, 31, 0xbd038c85);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_PLL_CTRL2, 0, 31, 0x1db4640a);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_PLL_CTRL3, 0, 31, 0x00008800);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_IF_REF, 0, 31, 0x444C1380);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_CTRL_IF, 0, 31, 0xDA302600);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_CTRL_INT, 0, 31, 0xDA261700);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_CTRL_RF, 0, 31, 0xDA262600);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_IF_INT_CURRENT, 0, 31,
|
|
0x26001700);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_RF_CURRENT, 0, 31,
|
|
0x00002660);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_VIDEO_AGC_CTRL, 0, 31,
|
|
0x72500800);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_VID_AUD_OVERRIDE, 0, 31,
|
|
0x27000100);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AV_SEP_CTRL, 0, 31, 0x5F39A934);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_COMP_FLT_CTRL, 0, 31,
|
|
0x00000000);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_SRC_PHASE_INC, 0, 31,
|
|
0x1befbf06);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_SRC_GAIN_CONTROL, 0, 31,
|
|
0x000035e8);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_RPT_VARIANCE, 0, 31, 0x00000000);
|
|
/* Save the Spec Inversion value */
|
|
dif_misc_ctrl_value &= FLD_DIF_SPEC_INV;
|
|
dif_misc_ctrl_value |= 0x3a033F11;
|
|
} else if (standard & V4L2_STD_PAL_M) {
|
|
/* improved Low Frequency Phase Noise */
|
|
status = vid_blk_write_word(dev, DIF_PLL_CTRL, 0xFF01FF0C);
|
|
status = vid_blk_write_word(dev, DIF_PLL_CTRL1, 0xbd038c85);
|
|
status = vid_blk_write_word(dev, DIF_PLL_CTRL2, 0x1db4640a);
|
|
status = vid_blk_write_word(dev, DIF_PLL_CTRL3, 0x00008800);
|
|
status = vid_blk_write_word(dev, DIF_AGC_IF_REF, 0x444C1380);
|
|
status = vid_blk_write_word(dev, DIF_AGC_IF_INT_CURRENT,
|
|
0x26001700);
|
|
status = vid_blk_write_word(dev, DIF_AGC_RF_CURRENT,
|
|
0x00002660);
|
|
status = vid_blk_write_word(dev, DIF_VIDEO_AGC_CTRL,
|
|
0x72500800);
|
|
status = vid_blk_write_word(dev, DIF_VID_AUD_OVERRIDE,
|
|
0x27000100);
|
|
status = vid_blk_write_word(dev, DIF_AV_SEP_CTRL, 0x012c405d);
|
|
status = vid_blk_write_word(dev, DIF_COMP_FLT_CTRL,
|
|
0x009f50c1);
|
|
status = vid_blk_write_word(dev, DIF_SRC_PHASE_INC,
|
|
0x1befbf06);
|
|
status = vid_blk_write_word(dev, DIF_SRC_GAIN_CONTROL,
|
|
0x000035e8);
|
|
status = vid_blk_write_word(dev, DIF_SOFT_RST_CTRL_REVB,
|
|
0x00000000);
|
|
/* Save the Spec Inversion value */
|
|
dif_misc_ctrl_value &= FLD_DIF_SPEC_INV;
|
|
dif_misc_ctrl_value |= 0x3A0A3F10;
|
|
} else if (standard & (V4L2_STD_PAL_N | V4L2_STD_PAL_Nc)) {
|
|
/* improved Low Frequency Phase Noise */
|
|
status = vid_blk_write_word(dev, DIF_PLL_CTRL, 0xFF01FF0C);
|
|
status = vid_blk_write_word(dev, DIF_PLL_CTRL1, 0xbd038c85);
|
|
status = vid_blk_write_word(dev, DIF_PLL_CTRL2, 0x1db4640a);
|
|
status = vid_blk_write_word(dev, DIF_PLL_CTRL3, 0x00008800);
|
|
status = vid_blk_write_word(dev, DIF_AGC_IF_REF, 0x444C1380);
|
|
status = vid_blk_write_word(dev, DIF_AGC_IF_INT_CURRENT,
|
|
0x26001700);
|
|
status = vid_blk_write_word(dev, DIF_AGC_RF_CURRENT,
|
|
0x00002660);
|
|
status = vid_blk_write_word(dev, DIF_VIDEO_AGC_CTRL,
|
|
0x72500800);
|
|
status = vid_blk_write_word(dev, DIF_VID_AUD_OVERRIDE,
|
|
0x27000100);
|
|
status = vid_blk_write_word(dev, DIF_AV_SEP_CTRL,
|
|
0x012c405d);
|
|
status = vid_blk_write_word(dev, DIF_COMP_FLT_CTRL,
|
|
0x009f50c1);
|
|
status = vid_blk_write_word(dev, DIF_SRC_PHASE_INC,
|
|
0x1befbf06);
|
|
status = vid_blk_write_word(dev, DIF_SRC_GAIN_CONTROL,
|
|
0x000035e8);
|
|
status = vid_blk_write_word(dev, DIF_SOFT_RST_CTRL_REVB,
|
|
0x00000000);
|
|
/* Save the Spec Inversion value */
|
|
dif_misc_ctrl_value &= FLD_DIF_SPEC_INV;
|
|
dif_misc_ctrl_value = 0x3A093F10;
|
|
} else if (standard &
|
|
(V4L2_STD_SECAM_B | V4L2_STD_SECAM_D | V4L2_STD_SECAM_G |
|
|
V4L2_STD_SECAM_K | V4L2_STD_SECAM_K1)) {
|
|
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_PLL_CTRL, 0, 31, 0x6503bc0c);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_PLL_CTRL1, 0, 31, 0xbd038c85);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_PLL_CTRL2, 0, 31, 0x1db4640a);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_PLL_CTRL3, 0, 31, 0x00008800);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_IF_REF, 0, 31, 0x888C0380);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_CTRL_IF, 0, 31, 0xe0262600);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_CTRL_INT, 0, 31, 0xc2171700);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_CTRL_RF, 0, 31, 0xc2262600);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_IF_INT_CURRENT, 0, 31,
|
|
0x26001700);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_RF_CURRENT, 0, 31,
|
|
0x00002660);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_VID_AUD_OVERRIDE, 0, 31,
|
|
0x27000100);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AV_SEP_CTRL, 0, 31, 0x3F3530ec);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_COMP_FLT_CTRL, 0, 31,
|
|
0x00000000);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_SRC_PHASE_INC, 0, 31,
|
|
0x1befbf06);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_SRC_GAIN_CONTROL, 0, 31,
|
|
0x000035e8);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_RPT_VARIANCE, 0, 31, 0x00000000);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_VIDEO_AGC_CTRL, 0, 31,
|
|
0xf4000000);
|
|
|
|
/* Save the Spec Inversion value */
|
|
dif_misc_ctrl_value &= FLD_DIF_SPEC_INV;
|
|
dif_misc_ctrl_value |= 0x3a023F11;
|
|
} else if (standard & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC)) {
|
|
/* Is it SECAM_L1? */
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_PLL_CTRL, 0, 31, 0x6503bc0c);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_PLL_CTRL1, 0, 31, 0xbd038c85);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_PLL_CTRL2, 0, 31, 0x1db4640a);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_PLL_CTRL3, 0, 31, 0x00008800);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_IF_REF, 0, 31, 0x888C0380);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_CTRL_IF, 0, 31, 0xe0262600);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_CTRL_INT, 0, 31, 0xc2171700);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_CTRL_RF, 0, 31, 0xc2262600);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_IF_INT_CURRENT, 0, 31,
|
|
0x26001700);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_RF_CURRENT, 0, 31,
|
|
0x00002660);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_VID_AUD_OVERRIDE, 0, 31,
|
|
0x27000100);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AV_SEP_CTRL, 0, 31, 0x3F3530ec);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_COMP_FLT_CTRL, 0, 31,
|
|
0x00000000);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_SRC_PHASE_INC, 0, 31,
|
|
0x1befbf06);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_SRC_GAIN_CONTROL, 0, 31,
|
|
0x000035e8);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_RPT_VARIANCE, 0, 31, 0x00000000);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_VIDEO_AGC_CTRL, 0, 31,
|
|
0xf2560000);
|
|
|
|
/* Save the Spec Inversion value */
|
|
dif_misc_ctrl_value &= FLD_DIF_SPEC_INV;
|
|
dif_misc_ctrl_value |= 0x3a023F11;
|
|
|
|
} else if (standard & V4L2_STD_NTSC_M) {
|
|
/* V4L2_STD_NTSC_M (75 IRE Setup) Or
|
|
V4L2_STD_NTSC_M_JP (Japan, 0 IRE Setup) */
|
|
|
|
/* For NTSC the centre frequency of video coming out of
|
|
sidewinder is around 7.1MHz or 3.6MHz depending on the
|
|
spectral inversion. so for a non spectrally inverted channel
|
|
the pll freq word is 0x03420c49
|
|
*/
|
|
|
|
status = vid_blk_write_word(dev, DIF_PLL_CTRL, 0x6503BC0C);
|
|
status = vid_blk_write_word(dev, DIF_PLL_CTRL1, 0xBD038C85);
|
|
status = vid_blk_write_word(dev, DIF_PLL_CTRL2, 0x1DB4640A);
|
|
status = vid_blk_write_word(dev, DIF_PLL_CTRL3, 0x00008800);
|
|
status = vid_blk_write_word(dev, DIF_AGC_IF_REF, 0x444C0380);
|
|
status = vid_blk_write_word(dev, DIF_AGC_IF_INT_CURRENT,
|
|
0x26001700);
|
|
status = vid_blk_write_word(dev, DIF_AGC_RF_CURRENT,
|
|
0x00002660);
|
|
status = vid_blk_write_word(dev, DIF_VIDEO_AGC_CTRL,
|
|
0x04000800);
|
|
status = vid_blk_write_word(dev, DIF_VID_AUD_OVERRIDE,
|
|
0x27000100);
|
|
status = vid_blk_write_word(dev, DIF_AV_SEP_CTRL, 0x01296e1f);
|
|
|
|
status = vid_blk_write_word(dev, DIF_COMP_FLT_CTRL,
|
|
0x009f50c1);
|
|
status = vid_blk_write_word(dev, DIF_SRC_PHASE_INC,
|
|
0x1befbf06);
|
|
status = vid_blk_write_word(dev, DIF_SRC_GAIN_CONTROL,
|
|
0x000035e8);
|
|
|
|
status = vid_blk_write_word(dev, DIF_AGC_CTRL_IF, 0xC2262600);
|
|
status = vid_blk_write_word(dev, DIF_AGC_CTRL_INT,
|
|
0xC2262600);
|
|
status = vid_blk_write_word(dev, DIF_AGC_CTRL_RF, 0xC2262600);
|
|
|
|
/* Save the Spec Inversion value */
|
|
dif_misc_ctrl_value &= FLD_DIF_SPEC_INV;
|
|
dif_misc_ctrl_value |= 0x3a003F10;
|
|
} else {
|
|
/* default PAL BG */
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_PLL_CTRL, 0, 31, 0x6503bc0c);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_PLL_CTRL1, 0, 31, 0xbd038c85);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_PLL_CTRL2, 0, 31, 0x1db4640a);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_PLL_CTRL3, 0, 31, 0x00008800);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_IF_REF, 0, 31, 0x444C1380);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_CTRL_IF, 0, 31, 0xDA302600);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_CTRL_INT, 0, 31, 0xDA261700);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_CTRL_RF, 0, 31, 0xDA262600);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_IF_INT_CURRENT, 0, 31,
|
|
0x26001700);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AGC_RF_CURRENT, 0, 31,
|
|
0x00002660);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_VIDEO_AGC_CTRL, 0, 31,
|
|
0x72500800);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_VID_AUD_OVERRIDE, 0, 31,
|
|
0x27000100);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_AV_SEP_CTRL, 0, 31, 0x3F3530EC);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_COMP_FLT_CTRL, 0, 31,
|
|
0x00A653A8);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_SRC_PHASE_INC, 0, 31,
|
|
0x1befbf06);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_SRC_GAIN_CONTROL, 0, 31,
|
|
0x000035e8);
|
|
status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32,
|
|
DIF_RPT_VARIANCE, 0, 31, 0x00000000);
|
|
/* Save the Spec Inversion value */
|
|
dif_misc_ctrl_value &= FLD_DIF_SPEC_INV;
|
|
dif_misc_ctrl_value |= 0x3a013F11;
|
|
}
|
|
|
|
/* The AGC values should be the same for all standards,
|
|
AUD_SRC_SEL[19] should always be disabled */
|
|
dif_misc_ctrl_value &= ~FLD_DIF_AUD_SRC_SEL;
|
|
|
|
/* It is still possible to get Set Standard calls even when we
|
|
are in FM mode.
|
|
This is done to override the value for FM. */
|
|
if (dev->active_mode == V4L2_TUNER_RADIO)
|
|
dif_misc_ctrl_value = 0x7a080000;
|
|
|
|
/* Write the calculated value for misc ontrol register */
|
|
status = vid_blk_write_word(dev, DIF_MISC_CTRL, dif_misc_ctrl_value);
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_tuner_pre_channel_change(struct cx231xx *dev)
|
|
{
|
|
int status = 0;
|
|
u32 dwval;
|
|
|
|
/* Set the RF and IF k_agc values to 3 */
|
|
status = vid_blk_read_word(dev, DIF_AGC_IF_REF, &dwval);
|
|
dwval &= ~(FLD_DIF_K_AGC_RF | FLD_DIF_K_AGC_IF);
|
|
dwval |= 0x33000000;
|
|
|
|
status = vid_blk_write_word(dev, DIF_AGC_IF_REF, dwval);
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_tuner_post_channel_change(struct cx231xx *dev)
|
|
{
|
|
int status = 0;
|
|
u32 dwval;
|
|
|
|
/* Set the RF and IF k_agc values to 4 for PAL/NTSC and 8 for
|
|
* SECAM L/B/D standards */
|
|
status = vid_blk_read_word(dev, DIF_AGC_IF_REF, &dwval);
|
|
dwval &= ~(FLD_DIF_K_AGC_RF | FLD_DIF_K_AGC_IF);
|
|
|
|
if (dev->norm & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_B |
|
|
V4L2_STD_SECAM_D))
|
|
dwval |= 0x88000000;
|
|
else
|
|
dwval |= 0x44000000;
|
|
|
|
status = vid_blk_write_word(dev, DIF_AGC_IF_REF, dwval);
|
|
|
|
return status;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* I 2 S - B L O C K C O N T R O L functions *
|
|
******************************************************************************/
|
|
int cx231xx_i2s_blk_initialize(struct cx231xx *dev)
|
|
{
|
|
int status = 0;
|
|
u32 value;
|
|
|
|
status = cx231xx_read_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS,
|
|
CH_PWR_CTRL1, 1, &value, 1);
|
|
/* enables clock to delta-sigma and decimation filter */
|
|
value |= 0x80;
|
|
status = cx231xx_write_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS,
|
|
CH_PWR_CTRL1, 1, value, 1);
|
|
/* power up all channel */
|
|
status = cx231xx_write_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS,
|
|
CH_PWR_CTRL2, 1, 0x00, 1);
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_i2s_blk_update_power_control(struct cx231xx *dev,
|
|
enum AV_MODE avmode)
|
|
{
|
|
int status = 0;
|
|
u32 value = 0;
|
|
|
|
if (avmode != POLARIS_AVMODE_ENXTERNAL_AV) {
|
|
status = cx231xx_read_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS,
|
|
CH_PWR_CTRL2, 1, &value, 1);
|
|
value |= 0xfe;
|
|
status = cx231xx_write_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS,
|
|
CH_PWR_CTRL2, 1, value, 1);
|
|
} else {
|
|
status = cx231xx_write_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS,
|
|
CH_PWR_CTRL2, 1, 0x00, 1);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/* set i2s_blk for audio input types */
|
|
int cx231xx_i2s_blk_set_audio_input(struct cx231xx *dev, u8 audio_input)
|
|
{
|
|
int status = 0;
|
|
|
|
switch (audio_input) {
|
|
case CX231XX_AMUX_LINE_IN:
|
|
status = cx231xx_write_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS,
|
|
CH_PWR_CTRL2, 1, 0x00, 1);
|
|
status = cx231xx_write_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS,
|
|
CH_PWR_CTRL1, 1, 0x80, 1);
|
|
break;
|
|
case CX231XX_AMUX_VIDEO:
|
|
default:
|
|
break;
|
|
}
|
|
|
|
dev->ctl_ainput = audio_input;
|
|
|
|
return status;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* P O W E R C O N T R O L functions *
|
|
******************************************************************************/
|
|
int cx231xx_set_power_mode(struct cx231xx *dev, enum AV_MODE mode)
|
|
{
|
|
u8 value[4] = { 0, 0, 0, 0 };
|
|
u32 tmp = 0;
|
|
int status = 0;
|
|
|
|
if (dev->power_mode != mode)
|
|
dev->power_mode = mode;
|
|
else {
|
|
cx231xx_info(" setPowerMode::mode = %d, No Change req.\n",
|
|
mode);
|
|
return 0;
|
|
}
|
|
|
|
cx231xx_info(" setPowerMode::mode = %d\n", mode);
|
|
|
|
status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN, value,
|
|
4);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
tmp = *((u32 *) value);
|
|
|
|
switch (mode) {
|
|
case POLARIS_AVMODE_ENXTERNAL_AV:
|
|
|
|
tmp &= (~PWR_MODE_MASK);
|
|
|
|
tmp |= PWR_AV_EN;
|
|
value[0] = (u8) tmp;
|
|
value[1] = (u8) (tmp >> 8);
|
|
value[2] = (u8) (tmp >> 16);
|
|
value[3] = (u8) (tmp >> 24);
|
|
status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
|
|
PWR_CTL_EN, value, 4);
|
|
msleep(PWR_SLEEP_INTERVAL);
|
|
|
|
tmp |= PWR_ISO_EN;
|
|
value[0] = (u8) tmp;
|
|
value[1] = (u8) (tmp >> 8);
|
|
value[2] = (u8) (tmp >> 16);
|
|
value[3] = (u8) (tmp >> 24);
|
|
status =
|
|
cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, PWR_CTL_EN,
|
|
value, 4);
|
|
msleep(PWR_SLEEP_INTERVAL);
|
|
|
|
tmp |= POLARIS_AVMODE_ENXTERNAL_AV;
|
|
value[0] = (u8) tmp;
|
|
value[1] = (u8) (tmp >> 8);
|
|
value[2] = (u8) (tmp >> 16);
|
|
value[3] = (u8) (tmp >> 24);
|
|
status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
|
|
PWR_CTL_EN, value, 4);
|
|
|
|
/* reset state of xceive tuner */
|
|
dev->xc_fw_load_done = 0;
|
|
break;
|
|
|
|
case POLARIS_AVMODE_ANALOGT_TV:
|
|
|
|
tmp &= (~PWR_DEMOD_EN);
|
|
tmp |= (I2C_DEMOD_EN);
|
|
value[0] = (u8) tmp;
|
|
value[1] = (u8) (tmp >> 8);
|
|
value[2] = (u8) (tmp >> 16);
|
|
value[3] = (u8) (tmp >> 24);
|
|
status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
|
|
PWR_CTL_EN, value, 4);
|
|
msleep(PWR_SLEEP_INTERVAL);
|
|
|
|
if (!(tmp & PWR_TUNER_EN)) {
|
|
tmp |= (PWR_TUNER_EN);
|
|
value[0] = (u8) tmp;
|
|
value[1] = (u8) (tmp >> 8);
|
|
value[2] = (u8) (tmp >> 16);
|
|
value[3] = (u8) (tmp >> 24);
|
|
status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
|
|
PWR_CTL_EN, value, 4);
|
|
msleep(PWR_SLEEP_INTERVAL);
|
|
}
|
|
|
|
if (!(tmp & PWR_AV_EN)) {
|
|
tmp |= PWR_AV_EN;
|
|
value[0] = (u8) tmp;
|
|
value[1] = (u8) (tmp >> 8);
|
|
value[2] = (u8) (tmp >> 16);
|
|
value[3] = (u8) (tmp >> 24);
|
|
status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
|
|
PWR_CTL_EN, value, 4);
|
|
msleep(PWR_SLEEP_INTERVAL);
|
|
}
|
|
if (!(tmp & PWR_ISO_EN)) {
|
|
tmp |= PWR_ISO_EN;
|
|
value[0] = (u8) tmp;
|
|
value[1] = (u8) (tmp >> 8);
|
|
value[2] = (u8) (tmp >> 16);
|
|
value[3] = (u8) (tmp >> 24);
|
|
status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
|
|
PWR_CTL_EN, value, 4);
|
|
msleep(PWR_SLEEP_INTERVAL);
|
|
}
|
|
|
|
if (!(tmp & POLARIS_AVMODE_ANALOGT_TV)) {
|
|
tmp |= POLARIS_AVMODE_ANALOGT_TV;
|
|
value[0] = (u8) tmp;
|
|
value[1] = (u8) (tmp >> 8);
|
|
value[2] = (u8) (tmp >> 16);
|
|
value[3] = (u8) (tmp >> 24);
|
|
status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
|
|
PWR_CTL_EN, value, 4);
|
|
msleep(PWR_SLEEP_INTERVAL);
|
|
}
|
|
|
|
if ((dev->model == CX231XX_BOARD_CNXT_RDE_250) ||
|
|
(dev->model == CX231XX_BOARD_CNXT_RDU_250)) {
|
|
/* tuner path to channel 1 from port 3 */
|
|
cx231xx_enable_i2c_for_tuner(dev, I2C_3);
|
|
|
|
if (dev->cx231xx_reset_analog_tuner)
|
|
dev->cx231xx_reset_analog_tuner(dev);
|
|
}
|
|
break;
|
|
|
|
case POLARIS_AVMODE_DIGITAL:
|
|
if (!(tmp & PWR_TUNER_EN)) {
|
|
tmp |= (PWR_TUNER_EN);
|
|
value[0] = (u8) tmp;
|
|
value[1] = (u8) (tmp >> 8);
|
|
value[2] = (u8) (tmp >> 16);
|
|
value[3] = (u8) (tmp >> 24);
|
|
status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
|
|
PWR_CTL_EN, value, 4);
|
|
msleep(PWR_SLEEP_INTERVAL);
|
|
}
|
|
if (!(tmp & PWR_AV_EN)) {
|
|
tmp |= PWR_AV_EN;
|
|
value[0] = (u8) tmp;
|
|
value[1] = (u8) (tmp >> 8);
|
|
value[2] = (u8) (tmp >> 16);
|
|
value[3] = (u8) (tmp >> 24);
|
|
status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
|
|
PWR_CTL_EN, value, 4);
|
|
msleep(PWR_SLEEP_INTERVAL);
|
|
}
|
|
if (!(tmp & PWR_ISO_EN)) {
|
|
tmp |= PWR_ISO_EN;
|
|
value[0] = (u8) tmp;
|
|
value[1] = (u8) (tmp >> 8);
|
|
value[2] = (u8) (tmp >> 16);
|
|
value[3] = (u8) (tmp >> 24);
|
|
status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
|
|
PWR_CTL_EN, value, 4);
|
|
msleep(PWR_SLEEP_INTERVAL);
|
|
}
|
|
|
|
tmp |= POLARIS_AVMODE_DIGITAL | I2C_DEMOD_EN;
|
|
value[0] = (u8) tmp;
|
|
value[1] = (u8) (tmp >> 8);
|
|
value[2] = (u8) (tmp >> 16);
|
|
value[3] = (u8) (tmp >> 24);
|
|
status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
|
|
PWR_CTL_EN, value, 4);
|
|
msleep(PWR_SLEEP_INTERVAL);
|
|
|
|
if (!(tmp & PWR_DEMOD_EN)) {
|
|
tmp |= PWR_DEMOD_EN;
|
|
value[0] = (u8) tmp;
|
|
value[1] = (u8) (tmp >> 8);
|
|
value[2] = (u8) (tmp >> 16);
|
|
value[3] = (u8) (tmp >> 24);
|
|
status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
|
|
PWR_CTL_EN, value, 4);
|
|
msleep(PWR_SLEEP_INTERVAL);
|
|
}
|
|
|
|
if ((dev->model == CX231XX_BOARD_CNXT_RDE_250) ||
|
|
(dev->model == CX231XX_BOARD_CNXT_RDU_250)) {
|
|
/* tuner path to channel 1 from port 3 */
|
|
cx231xx_enable_i2c_for_tuner(dev, I2C_3);
|
|
|
|
if (dev->cx231xx_reset_analog_tuner)
|
|
dev->cx231xx_reset_analog_tuner(dev);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
msleep(PWR_SLEEP_INTERVAL);
|
|
|
|
/* For power saving, only enable Pwr_resetout_n
|
|
when digital TV is selected. */
|
|
if (mode == POLARIS_AVMODE_DIGITAL) {
|
|
tmp |= PWR_RESETOUT_EN;
|
|
value[0] = (u8) tmp;
|
|
value[1] = (u8) (tmp >> 8);
|
|
value[2] = (u8) (tmp >> 16);
|
|
value[3] = (u8) (tmp >> 24);
|
|
status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
|
|
PWR_CTL_EN, value, 4);
|
|
msleep(PWR_SLEEP_INTERVAL);
|
|
}
|
|
|
|
/* update power control for afe */
|
|
status = cx231xx_afe_update_power_control(dev, mode);
|
|
|
|
/* update power control for i2s_blk */
|
|
status = cx231xx_i2s_blk_update_power_control(dev, mode);
|
|
|
|
status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN, value,
|
|
4);
|
|
cx231xx_info(" The data of PWR_CTL_EN register 0x74"
|
|
"=0x%0x,0x%0x,0x%0x,0x%0x\n",
|
|
value[0], value[1], value[2], value[3]);
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_power_suspend(struct cx231xx *dev)
|
|
{
|
|
u8 value[4] = { 0, 0, 0, 0 };
|
|
u32 tmp = 0;
|
|
int status = 0;
|
|
|
|
status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN,
|
|
value, 4);
|
|
if (status > 0)
|
|
return status;
|
|
|
|
tmp = *((u32 *) value);
|
|
tmp &= (~PWR_MODE_MASK);
|
|
|
|
value[0] = (u8) tmp;
|
|
value[1] = (u8) (tmp >> 8);
|
|
value[2] = (u8) (tmp >> 16);
|
|
value[3] = (u8) (tmp >> 24);
|
|
status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, PWR_CTL_EN,
|
|
value, 4);
|
|
|
|
return status;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* S T R E A M C O N T R O L functions *
|
|
******************************************************************************/
|
|
int cx231xx_start_stream(struct cx231xx *dev, u32 ep_mask)
|
|
{
|
|
u8 value[4] = { 0x0, 0x0, 0x0, 0x0 };
|
|
u32 tmp = 0;
|
|
int status = 0;
|
|
|
|
cx231xx_info("cx231xx_start_stream():: ep_mask = %x\n", ep_mask);
|
|
status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET,
|
|
value, 4);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
tmp = *((u32 *) value);
|
|
tmp |= ep_mask;
|
|
value[0] = (u8) tmp;
|
|
value[1] = (u8) (tmp >> 8);
|
|
value[2] = (u8) (tmp >> 16);
|
|
value[3] = (u8) (tmp >> 24);
|
|
|
|
status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, EP_MODE_SET,
|
|
value, 4);
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_stop_stream(struct cx231xx *dev, u32 ep_mask)
|
|
{
|
|
u8 value[4] = { 0x0, 0x0, 0x0, 0x0 };
|
|
u32 tmp = 0;
|
|
int status = 0;
|
|
|
|
cx231xx_info("cx231xx_stop_stream():: ep_mask = %x\n", ep_mask);
|
|
status =
|
|
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET, value, 4);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
tmp = *((u32 *) value);
|
|
tmp &= (~ep_mask);
|
|
value[0] = (u8) tmp;
|
|
value[1] = (u8) (tmp >> 8);
|
|
value[2] = (u8) (tmp >> 16);
|
|
value[3] = (u8) (tmp >> 24);
|
|
|
|
status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, EP_MODE_SET,
|
|
value, 4);
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type)
|
|
{
|
|
int status = 0;
|
|
|
|
if (dev->udev->speed == USB_SPEED_HIGH) {
|
|
switch (media_type) {
|
|
case 81: /* audio */
|
|
cx231xx_info("%s: Audio enter HANC\n", __func__);
|
|
status =
|
|
cx231xx_mode_register(dev, TS_MODE_REG, 0x9300);
|
|
break;
|
|
|
|
case 2: /* vbi */
|
|
cx231xx_info("%s: set vanc registers\n", __func__);
|
|
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x300);
|
|
break;
|
|
|
|
case 3: /* sliced cc */
|
|
cx231xx_info("%s: set hanc registers\n", __func__);
|
|
status =
|
|
cx231xx_mode_register(dev, TS_MODE_REG, 0x1300);
|
|
break;
|
|
|
|
case 0: /* video */
|
|
cx231xx_info("%s: set video registers\n", __func__);
|
|
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100);
|
|
break;
|
|
|
|
case 4: /* ts1 */
|
|
cx231xx_info("%s: set ts1 registers\n", __func__);
|
|
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x101);
|
|
status = cx231xx_mode_register(dev, TS1_CFG_REG, 0x400);
|
|
break;
|
|
case 6: /* ts1 parallel mode */
|
|
cx231xx_info("%s: set ts1 parrallel mode registers\n",
|
|
__func__);
|
|
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100);
|
|
status = cx231xx_mode_register(dev, TS1_CFG_REG, 0x400);
|
|
break;
|
|
}
|
|
} else {
|
|
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x101);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_capture_start(struct cx231xx *dev, int start, u8 media_type)
|
|
{
|
|
int rc = -1;
|
|
u32 ep_mask = -1;
|
|
struct pcb_config *pcb_config;
|
|
|
|
/* get EP for media type */
|
|
pcb_config = (struct pcb_config *)&dev->current_pcb_config;
|
|
|
|
if (pcb_config->config_num == 1) {
|
|
switch (media_type) {
|
|
case 0: /* Video */
|
|
ep_mask = ENABLE_EP4; /* ep4 [00:1000] */
|
|
break;
|
|
case 1: /* Audio */
|
|
ep_mask = ENABLE_EP3; /* ep3 [00:0100] */
|
|
break;
|
|
case 2: /* Vbi */
|
|
ep_mask = ENABLE_EP5; /* ep5 [01:0000] */
|
|
break;
|
|
case 3: /* Sliced_cc */
|
|
ep_mask = ENABLE_EP6; /* ep6 [10:0000] */
|
|
break;
|
|
case 4: /* ts1 */
|
|
case 6: /* ts1 parallel mode */
|
|
ep_mask = ENABLE_EP1; /* ep1 [00:0001] */
|
|
break;
|
|
case 5: /* ts2 */
|
|
ep_mask = ENABLE_EP2; /* ep2 [00:0010] */
|
|
break;
|
|
}
|
|
|
|
} else if (pcb_config->config_num > 1) {
|
|
switch (media_type) {
|
|
case 0: /* Video */
|
|
ep_mask = ENABLE_EP4; /* ep4 [00:1000] */
|
|
break;
|
|
case 1: /* Audio */
|
|
ep_mask = ENABLE_EP3; /* ep3 [00:0100] */
|
|
break;
|
|
case 2: /* Vbi */
|
|
ep_mask = ENABLE_EP5; /* ep5 [01:0000] */
|
|
break;
|
|
case 3: /* Sliced_cc */
|
|
ep_mask = ENABLE_EP6; /* ep6 [10:0000] */
|
|
break;
|
|
case 4: /* ts1 */
|
|
case 6: /* ts1 parallel mode */
|
|
ep_mask = ENABLE_EP1; /* ep1 [00:0001] */
|
|
break;
|
|
case 5: /* ts2 */
|
|
ep_mask = ENABLE_EP2; /* ep2 [00:0010] */
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
if (start) {
|
|
rc = cx231xx_initialize_stream_xfer(dev, media_type);
|
|
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* enable video capture */
|
|
if (ep_mask > 0)
|
|
rc = cx231xx_start_stream(dev, ep_mask);
|
|
} else {
|
|
/* disable video capture */
|
|
if (ep_mask > 0)
|
|
rc = cx231xx_stop_stream(dev, ep_mask);
|
|
}
|
|
|
|
if (dev->mode == CX231XX_ANALOG_MODE)
|
|
;/* do any in Analog mode */
|
|
else
|
|
;/* do any in digital mode */
|
|
|
|
return rc;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cx231xx_capture_start);
|
|
|
|
/*****************************************************************************
|
|
* G P I O B I T control functions *
|
|
******************************************************************************/
|
|
int cx231xx_set_gpio_bit(struct cx231xx *dev, u32 gpio_bit, u8 * gpio_val)
|
|
{
|
|
int status = 0;
|
|
|
|
status = cx231xx_send_gpio_cmd(dev, gpio_bit, gpio_val, 4, 0, 0);
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_get_gpio_bit(struct cx231xx *dev, u32 gpio_bit, u8 * gpio_val)
|
|
{
|
|
int status = 0;
|
|
|
|
status = cx231xx_send_gpio_cmd(dev, gpio_bit, gpio_val, 4, 0, 1);
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* cx231xx_set_gpio_direction
|
|
* Sets the direction of the GPIO pin to input or output
|
|
*
|
|
* Parameters :
|
|
* pin_number : The GPIO Pin number to program the direction for
|
|
* from 0 to 31
|
|
* pin_value : The Direction of the GPIO Pin under reference.
|
|
* 0 = Input direction
|
|
* 1 = Output direction
|
|
*/
|
|
int cx231xx_set_gpio_direction(struct cx231xx *dev,
|
|
int pin_number, int pin_value)
|
|
{
|
|
int status = 0;
|
|
u32 value = 0;
|
|
|
|
/* Check for valid pin_number - if 32 , bail out */
|
|
if (pin_number >= 32)
|
|
return -EINVAL;
|
|
|
|
/* input */
|
|
if (pin_value == 0)
|
|
value = dev->gpio_dir & (~(1 << pin_number)); /* clear */
|
|
else
|
|
value = dev->gpio_dir | (1 << pin_number);
|
|
|
|
status = cx231xx_set_gpio_bit(dev, value, (u8 *) &dev->gpio_val);
|
|
|
|
/* cache the value for future */
|
|
dev->gpio_dir = value;
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* cx231xx_set_gpio_value
|
|
* Sets the value of the GPIO pin to Logic high or low. The Pin under
|
|
* reference should ALREADY BE SET IN OUTPUT MODE !!!!!!!!!
|
|
*
|
|
* Parameters :
|
|
* pin_number : The GPIO Pin number to program the direction for
|
|
* pin_value : The value of the GPIO Pin under reference.
|
|
* 0 = set it to 0
|
|
* 1 = set it to 1
|
|
*/
|
|
int cx231xx_set_gpio_value(struct cx231xx *dev, int pin_number, int pin_value)
|
|
{
|
|
int status = 0;
|
|
u32 value = 0;
|
|
|
|
/* Check for valid pin_number - if 0xFF , bail out */
|
|
if (pin_number >= 32)
|
|
return -EINVAL;
|
|
|
|
/* first do a sanity check - if the Pin is not output, make it output */
|
|
if ((dev->gpio_dir & (1 << pin_number)) == 0x00) {
|
|
/* It was in input mode */
|
|
value = dev->gpio_dir | (1 << pin_number);
|
|
dev->gpio_dir = value;
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir,
|
|
(u8 *) &dev->gpio_val);
|
|
value = 0;
|
|
}
|
|
|
|
if (pin_value == 0)
|
|
value = dev->gpio_val & (~(1 << pin_number));
|
|
else
|
|
value = dev->gpio_val | (1 << pin_number);
|
|
|
|
/* store the value */
|
|
dev->gpio_val = value;
|
|
|
|
/* toggle bit0 of GP_IO */
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
|
|
|
|
return status;
|
|
}
|
|
|
|
/*****************************************************************************
|
|
* G P I O I2C related functions *
|
|
******************************************************************************/
|
|
int cx231xx_gpio_i2c_start(struct cx231xx *dev)
|
|
{
|
|
int status = 0;
|
|
|
|
/* set SCL to output 1 ; set SDA to output 1 */
|
|
dev->gpio_dir |= 1 << dev->board.tuner_scl_gpio;
|
|
dev->gpio_dir |= 1 << dev->board.tuner_sda_gpio;
|
|
dev->gpio_val |= 1 << dev->board.tuner_scl_gpio;
|
|
dev->gpio_val |= 1 << dev->board.tuner_sda_gpio;
|
|
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
|
|
if (status < 0)
|
|
return -EINVAL;
|
|
|
|
/* set SCL to output 1; set SDA to output 0 */
|
|
dev->gpio_val |= 1 << dev->board.tuner_scl_gpio;
|
|
dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio);
|
|
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
|
|
if (status < 0)
|
|
return -EINVAL;
|
|
|
|
/* set SCL to output 0; set SDA to output 0 */
|
|
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
|
|
dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio);
|
|
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
|
|
if (status < 0)
|
|
return -EINVAL;
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_gpio_i2c_end(struct cx231xx *dev)
|
|
{
|
|
int status = 0;
|
|
|
|
/* set SCL to output 0; set SDA to output 0 */
|
|
dev->gpio_dir |= 1 << dev->board.tuner_scl_gpio;
|
|
dev->gpio_dir |= 1 << dev->board.tuner_sda_gpio;
|
|
|
|
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
|
|
dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio);
|
|
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
|
|
if (status < 0)
|
|
return -EINVAL;
|
|
|
|
/* set SCL to output 1; set SDA to output 0 */
|
|
dev->gpio_val |= 1 << dev->board.tuner_scl_gpio;
|
|
dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio);
|
|
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
|
|
if (status < 0)
|
|
return -EINVAL;
|
|
|
|
/* set SCL to input ,release SCL cable control
|
|
set SDA to input ,release SDA cable control */
|
|
dev->gpio_dir &= ~(1 << dev->board.tuner_scl_gpio);
|
|
dev->gpio_dir &= ~(1 << dev->board.tuner_sda_gpio);
|
|
|
|
status =
|
|
cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
|
|
if (status < 0)
|
|
return -EINVAL;
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_gpio_i2c_write_byte(struct cx231xx *dev, u8 data)
|
|
{
|
|
int status = 0;
|
|
u8 i;
|
|
|
|
/* set SCL to output ; set SDA to output */
|
|
dev->gpio_dir |= 1 << dev->board.tuner_scl_gpio;
|
|
dev->gpio_dir |= 1 << dev->board.tuner_sda_gpio;
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
if (((data << i) & 0x80) == 0) {
|
|
/* set SCL to output 0; set SDA to output 0 */
|
|
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
|
|
dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio);
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir,
|
|
(u8 *)&dev->gpio_val);
|
|
|
|
/* set SCL to output 1; set SDA to output 0 */
|
|
dev->gpio_val |= 1 << dev->board.tuner_scl_gpio;
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir,
|
|
(u8 *)&dev->gpio_val);
|
|
|
|
/* set SCL to output 0; set SDA to output 0 */
|
|
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir,
|
|
(u8 *)&dev->gpio_val);
|
|
} else {
|
|
/* set SCL to output 0; set SDA to output 1 */
|
|
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
|
|
dev->gpio_val |= 1 << dev->board.tuner_sda_gpio;
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir,
|
|
(u8 *)&dev->gpio_val);
|
|
|
|
/* set SCL to output 1; set SDA to output 1 */
|
|
dev->gpio_val |= 1 << dev->board.tuner_scl_gpio;
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir,
|
|
(u8 *)&dev->gpio_val);
|
|
|
|
/* set SCL to output 0; set SDA to output 1 */
|
|
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir,
|
|
(u8 *)&dev->gpio_val);
|
|
}
|
|
}
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_gpio_i2c_read_byte(struct cx231xx *dev, u8 * buf)
|
|
{
|
|
u8 value = 0;
|
|
int status = 0;
|
|
u32 gpio_logic_value = 0;
|
|
u8 i;
|
|
|
|
/* read byte */
|
|
for (i = 0; i < 8; i++) { /* send write I2c addr */
|
|
|
|
/* set SCL to output 0; set SDA to input */
|
|
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir,
|
|
(u8 *)&dev->gpio_val);
|
|
|
|
/* set SCL to output 1; set SDA to input */
|
|
dev->gpio_val |= 1 << dev->board.tuner_scl_gpio;
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir,
|
|
(u8 *)&dev->gpio_val);
|
|
|
|
/* get SDA data bit */
|
|
gpio_logic_value = dev->gpio_val;
|
|
status = cx231xx_get_gpio_bit(dev, dev->gpio_dir,
|
|
(u8 *)&dev->gpio_val);
|
|
if ((dev->gpio_val & (1 << dev->board.tuner_sda_gpio)) != 0)
|
|
value |= (1 << (8 - i - 1));
|
|
|
|
dev->gpio_val = gpio_logic_value;
|
|
}
|
|
|
|
/* set SCL to output 0,finish the read latest SCL signal.
|
|
!!!set SDA to input, never to modify SDA direction at
|
|
the same times */
|
|
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
|
|
|
|
/* store the value */
|
|
*buf = value & 0xff;
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_gpio_i2c_read_ack(struct cx231xx *dev)
|
|
{
|
|
int status = 0;
|
|
u32 gpio_logic_value = 0;
|
|
int nCnt = 10;
|
|
int nInit = nCnt;
|
|
|
|
/* clock stretch; set SCL to input; set SDA to input;
|
|
get SCL value till SCL = 1 */
|
|
dev->gpio_dir &= ~(1 << dev->board.tuner_sda_gpio);
|
|
dev->gpio_dir &= ~(1 << dev->board.tuner_scl_gpio);
|
|
|
|
gpio_logic_value = dev->gpio_val;
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
|
|
|
|
do {
|
|
msleep(2);
|
|
status = cx231xx_get_gpio_bit(dev, dev->gpio_dir,
|
|
(u8 *)&dev->gpio_val);
|
|
nCnt--;
|
|
} while (((dev->gpio_val &
|
|
(1 << dev->board.tuner_scl_gpio)) == 0) &&
|
|
(nCnt > 0));
|
|
|
|
if (nCnt == 0)
|
|
cx231xx_info("No ACK after %d msec -GPIO I2C failed!",
|
|
nInit * 10);
|
|
|
|
/*
|
|
* readAck
|
|
* through clock stretch, slave has given a SCL signal,
|
|
* so the SDA data can be directly read.
|
|
*/
|
|
status = cx231xx_get_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
|
|
|
|
if ((dev->gpio_val & 1 << dev->board.tuner_sda_gpio) == 0) {
|
|
dev->gpio_val = gpio_logic_value;
|
|
dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio);
|
|
status = 0;
|
|
} else {
|
|
dev->gpio_val = gpio_logic_value;
|
|
dev->gpio_val |= (1 << dev->board.tuner_sda_gpio);
|
|
}
|
|
|
|
/* read SDA end, set the SCL to output 0, after this operation,
|
|
SDA direction can be changed. */
|
|
dev->gpio_val = gpio_logic_value;
|
|
dev->gpio_dir |= (1 << dev->board.tuner_scl_gpio);
|
|
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_gpio_i2c_write_ack(struct cx231xx *dev)
|
|
{
|
|
int status = 0;
|
|
|
|
/* set SDA to ouput */
|
|
dev->gpio_dir |= 1 << dev->board.tuner_sda_gpio;
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
|
|
|
|
/* set SCL = 0 (output); set SDA = 0 (output) */
|
|
dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio);
|
|
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
|
|
|
|
/* set SCL = 1 (output); set SDA = 0 (output) */
|
|
dev->gpio_val |= 1 << dev->board.tuner_scl_gpio;
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
|
|
|
|
/* set SCL = 0 (output); set SDA = 0 (output) */
|
|
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
|
|
|
|
/* set SDA to input,and then the slave will read data from SDA. */
|
|
dev->gpio_dir &= ~(1 << dev->board.tuner_sda_gpio);
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_gpio_i2c_write_nak(struct cx231xx *dev)
|
|
{
|
|
int status = 0;
|
|
|
|
/* set scl to output ; set sda to input */
|
|
dev->gpio_dir |= 1 << dev->board.tuner_scl_gpio;
|
|
dev->gpio_dir &= ~(1 << dev->board.tuner_sda_gpio);
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
|
|
|
|
/* set scl to output 0; set sda to input */
|
|
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
|
|
|
|
/* set scl to output 1; set sda to input */
|
|
dev->gpio_val |= 1 << dev->board.tuner_scl_gpio;
|
|
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
|
|
|
|
return status;
|
|
}
|
|
|
|
/*****************************************************************************
|
|
* G P I O I2C related functions *
|
|
******************************************************************************/
|
|
/* cx231xx_gpio_i2c_read
|
|
* Function to read data from gpio based I2C interface
|
|
*/
|
|
int cx231xx_gpio_i2c_read(struct cx231xx *dev, u8 dev_addr, u8 * buf, u8 len)
|
|
{
|
|
int status = 0;
|
|
int i = 0;
|
|
|
|
/* get the lock */
|
|
mutex_lock(&dev->gpio_i2c_lock);
|
|
|
|
/* start */
|
|
status = cx231xx_gpio_i2c_start(dev);
|
|
|
|
/* write dev_addr */
|
|
status = cx231xx_gpio_i2c_write_byte(dev, (dev_addr << 1) + 1);
|
|
|
|
/* readAck */
|
|
status = cx231xx_gpio_i2c_read_ack(dev);
|
|
|
|
/* read data */
|
|
for (i = 0; i < len; i++) {
|
|
/* read data */
|
|
buf[i] = 0;
|
|
status = cx231xx_gpio_i2c_read_byte(dev, &buf[i]);
|
|
|
|
if ((i + 1) != len) {
|
|
/* only do write ack if we more length */
|
|
status = cx231xx_gpio_i2c_write_ack(dev);
|
|
}
|
|
}
|
|
|
|
/* write NAK - inform reads are complete */
|
|
status = cx231xx_gpio_i2c_write_nak(dev);
|
|
|
|
/* write end */
|
|
status = cx231xx_gpio_i2c_end(dev);
|
|
|
|
/* release the lock */
|
|
mutex_unlock(&dev->gpio_i2c_lock);
|
|
|
|
return status;
|
|
}
|
|
|
|
/* cx231xx_gpio_i2c_write
|
|
* Function to write data to gpio based I2C interface
|
|
*/
|
|
int cx231xx_gpio_i2c_write(struct cx231xx *dev, u8 dev_addr, u8 * buf, u8 len)
|
|
{
|
|
int status = 0;
|
|
int i = 0;
|
|
|
|
/* get the lock */
|
|
mutex_lock(&dev->gpio_i2c_lock);
|
|
|
|
/* start */
|
|
status = cx231xx_gpio_i2c_start(dev);
|
|
|
|
/* write dev_addr */
|
|
status = cx231xx_gpio_i2c_write_byte(dev, dev_addr << 1);
|
|
|
|
/* read Ack */
|
|
status = cx231xx_gpio_i2c_read_ack(dev);
|
|
|
|
for (i = 0; i < len; i++) {
|
|
/* Write data */
|
|
status = cx231xx_gpio_i2c_write_byte(dev, buf[i]);
|
|
|
|
/* read Ack */
|
|
status = cx231xx_gpio_i2c_read_ack(dev);
|
|
}
|
|
|
|
/* write End */
|
|
status = cx231xx_gpio_i2c_end(dev);
|
|
|
|
/* release the lock */
|
|
mutex_unlock(&dev->gpio_i2c_lock);
|
|
|
|
return 0;
|
|
}
|