78c10e556e
Pull MIPS updates from Ralf Baechle: - Improvements to the tlb_dump code - KVM fixes - Add support for appended DTB - Minor improvements to the R12000 support - Minor improvements to the R12000 support - Various platform improvments for BCM47xx - The usual pile of minor cleanups - A number of BPF fixes and improvments - Some improvments to the support for R3000 and DECstations - Some improvments to the ATH79 platform support - A major patchset for the JZ4740 SOC adding support for the CI20 platform - Add support for the Pistachio SOC - Minor BMIPS/BCM63xx platform support improvments. - Avoid "SYNC 0" as memory barrier when unlocking spinlocks - Add support for the XWR-1750 board. - Paul's __cpuinit/__cpuinitdata cleanups. - New Malta CPU board support large memory so enable ZONE_DMA32. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits) MIPS: spinlock: Adjust arch_spin_lock back-off time MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA MIPS: BCM47xx: Simplify handling SPROM revisions MIPS: Cobalt Don't use module_init in non-modular MTD registration. MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/ MIPS: use for_each_sg() MIPS: BCM47xx: Don't select BCMA_HOST_PCI MIPS: BCM47xx: Add helper variable for storing NVRAM length MIPS: IRQ/IP27: Move IRQ allocation API to platform code. MIPS: Replace smp_mb with release barrier function in unlocks. MIPS: i8259: DT support MIPS: Malta: Basic DT plumbing MIPS: include errno.h for ENODEV in mips-cm.h MIPS: Define GCR_GIC_STATUS register fields MIPS: BPF: Introduce BPF ASM helpers MIPS: BPF: Use BPF register names to describe the ABI MIPS: BPF: Move register definition to the BPF header MIPS: net: BPF: Replace RSIZE with SZREG MIPS: BPF: Free up some callee-saved registers MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers ...
47 lines
2.3 KiB
Makefile
47 lines
2.3 KiB
Makefile
#
|
|
# Makefile for the phy drivers.
|
|
#
|
|
|
|
obj-$(CONFIG_GENERIC_PHY) += phy-core.o
|
|
obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
|
|
obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
|
|
obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
|
|
obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
|
|
obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
|
|
obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
|
|
obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
|
|
obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
|
|
obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
|
|
obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
|
|
obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o
|
|
obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o
|
|
obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
|
|
obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
|
|
obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
|
|
obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
|
|
obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
|
|
obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
|
|
obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
|
|
obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
|
|
obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
|
|
obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
|
|
phy-exynos-usb2-y += phy-samsung-usb2.o
|
|
phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
|
|
phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
|
|
phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
|
|
phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
|
|
obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
|
|
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
|
|
obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
|
|
obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
|
|
obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
|
|
obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
|
|
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
|
|
obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
|
|
obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o
|
|
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
|
|
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
|
|
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
|
|
obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
|
|
obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
|
|
obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
|