kernel-fxtec-pro1x/include/linux/usb/renesas_usbhs.h
Kuninori Morimoto f427eb64f4 usb: gadget: renesas_usbhs: support otg pin control
some renesas_usbhs device is supporting OTG external device interface.
In that device, it is necessary to control PWEN/EXTLP on DVSTCTR.
This patch support it.
But renesas_usbhs driver doesn't have OTG support for now.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-13 20:41:47 +03:00

187 lines
3.7 KiB
C

/*
* Renesas USB
*
* Copyright (C) 2011 Renesas Solutions Corp.
* Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifndef RENESAS_USB_H
#define RENESAS_USB_H
#include <linux/platform_device.h>
#include <linux/usb/ch9.h>
/*
* module type
*
* it will be return value from get_id
*/
enum {
USBHS_HOST = 0,
USBHS_GADGET,
USBHS_MAX,
};
/*
* callback functions table for driver
*
* These functions are called from platform for driver.
* Callback function's pointer will be set before
* renesas_usbhs_platform_callback :: hardware_init was called
*/
struct renesas_usbhs_driver_callback {
int (*notify_hotplug)(struct platform_device *pdev);
};
/*
* callback functions for platform
*
* These functions are called from driver for platform
*/
struct renesas_usbhs_platform_callback {
/*
* option:
*
* Hardware init function for platform.
* it is called when driver was probed.
*/
int (*hardware_init)(struct platform_device *pdev);
/*
* option:
*
* Hardware exit function for platform.
* it is called when driver was removed
*/
void (*hardware_exit)(struct platform_device *pdev);
/*
* option:
*
* Phy reset for platform
*/
void (*phy_reset)(struct platform_device *pdev);
/*
* get USB ID function
* - USBHS_HOST
* - USBHS_GADGET
*/
int (*get_id)(struct platform_device *pdev);
/*
* get VBUS status function.
*/
int (*get_vbus)(struct platform_device *pdev);
/*
* option:
*
* VBUS control is needed for Host
*/
int (*set_vbus)(struct platform_device *pdev, int enable);
};
/*
* parameters for renesas usbhs
*
* some register needs USB chip specific parameters.
* This struct show it to driver
*/
struct renesas_usbhs_driver_param {
/*
* pipe settings
*/
u32 *pipe_type; /* array of USB_ENDPOINT_XFER_xxx (from ep0) */
int pipe_size; /* pipe_type array size */
/*
* option:
*
* for BUSWAIT :: BWAIT
* see
* renesas_usbhs/common.c :: usbhsc_set_buswait()
* */
int buswait_bwait;
/*
* option:
*
* delay time from notify_hotplug callback
*/
int detection_delay;
/*
* option:
*
* dma id for dmaengine
*/
int d0_tx_id;
int d0_rx_id;
int d1_tx_id;
int d1_rx_id;
/*
* option:
*
* pio <--> dma border.
*/
int pio_dma_border; /* default is 64byte */
/*
* option:
*/
u32 has_otg:1; /* for controlling PWEN/EXTLP */
};
/*
* option:
*
* platform information for renesas_usbhs driver.
*/
struct renesas_usbhs_platform_info {
/*
* option:
*
* platform set these functions before
* call platform_add_devices if needed
*/
struct renesas_usbhs_platform_callback platform_callback;
/*
* driver set these callback functions pointer.
* platform can use it on callback functions
*/
struct renesas_usbhs_driver_callback driver_callback;
/*
* option:
*
* driver use these param for some register
*/
struct renesas_usbhs_driver_param driver_param;
};
/*
* macro for platform
*/
#define renesas_usbhs_get_info(pdev)\
((struct renesas_usbhs_platform_info *)(pdev)->dev.platform_data)
#define renesas_usbhs_call_notify_hotplug(pdev) \
({ \
struct renesas_usbhs_driver_callback *dc; \
dc = &(renesas_usbhs_get_info(pdev)->driver_callback); \
if (dc && dc->notify_hotplug) \
dc->notify_hotplug(pdev); \
})
#endif /* RENESAS_USB_H */