kernel-fxtec-pro1x/arch/alpha/kernel/pci-sysfs.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

368 lines
9.2 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* arch/alpha/kernel/pci-sysfs.c
*
* Copyright (C) 2009 Ivan Kokshaysky
*
* Alpha PCI resource files.
*
* Loosely based on generic HAVE_PCI_MMAP implementation in
* drivers/pci/pci-sysfs.c
*/
#include <linux/sched.h>
#include <linux/stat.h>
#include <linux/slab.h>
#include <linux/pci.h>
static int hose_mmap_page_range(struct pci_controller *hose,
struct vm_area_struct *vma,
enum pci_mmap_state mmap_type, int sparse)
{
unsigned long base;
if (mmap_type == pci_mmap_mem)
base = sparse ? hose->sparse_mem_base : hose->dense_mem_base;
else
base = sparse ? hose->sparse_io_base : hose->dense_io_base;
vma->vm_pgoff += base >> PAGE_SHIFT;
return io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
vma->vm_end - vma->vm_start,
vma->vm_page_prot);
}
static int __pci_mmap_fits(struct pci_dev *pdev, int num,
struct vm_area_struct *vma, int sparse)
{
unsigned long nr, start, size;
int shift = sparse ? 5 : 0;
nr = vma_pages(vma);
start = vma->vm_pgoff;
size = ((pci_resource_len(pdev, num) - 1) >> (PAGE_SHIFT - shift)) + 1;
if (start < size && size - start >= nr)
return 1;
WARN(1, "process \"%s\" tried to map%s 0x%08lx-0x%08lx on %s BAR %d "
"(size 0x%08lx)\n",
current->comm, sparse ? " sparse" : "", start, start + nr,
pci_name(pdev), num, size);
return 0;
}
/**
* pci_mmap_resource - map a PCI resource into user memory space
* @kobj: kobject for mapping
* @attr: struct bin_attribute for the file being mapped
* @vma: struct vm_area_struct passed into the mmap
* @sparse: address space type
*
* Use the bus mapping routines to map a PCI resource into userspace.
*/
static int pci_mmap_resource(struct kobject *kobj,
struct bin_attribute *attr,
struct vm_area_struct *vma, int sparse)
{
struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
struct resource *res = attr->private;
enum pci_mmap_state mmap_type;
struct pci_bus_region bar;
int i;
for (i = 0; i < PCI_ROM_RESOURCE; i++)
if (res == &pdev->resource[i])
break;
if (i >= PCI_ROM_RESOURCE)
return -ENODEV;
if (res->flags & IORESOURCE_MEM && iomem_is_exclusive(res->start))
return -EINVAL;
if (!__pci_mmap_fits(pdev, i, vma, sparse))
return -EINVAL;
pcibios_resource_to_bus(pdev->bus, &bar, res);
vma->vm_pgoff += bar.start >> (PAGE_SHIFT - (sparse ? 5 : 0));
mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io;
return hose_mmap_page_range(pdev->sysdata, vma, mmap_type, sparse);
}
static int pci_mmap_resource_sparse(struct file *filp, struct kobject *kobj,
struct bin_attribute *attr,
struct vm_area_struct *vma)
{
return pci_mmap_resource(kobj, attr, vma, 1);
}
static int pci_mmap_resource_dense(struct file *filp, struct kobject *kobj,
struct bin_attribute *attr,
struct vm_area_struct *vma)
{
return pci_mmap_resource(kobj, attr, vma, 0);
}
/**
* pci_remove_resource_files - cleanup resource files
* @dev: dev to cleanup
*
* If we created resource files for @dev, remove them from sysfs and
* free their resources.
*/
void pci_remove_resource_files(struct pci_dev *pdev)
{
int i;
for (i = 0; i < PCI_ROM_RESOURCE; i++) {
struct bin_attribute *res_attr;
res_attr = pdev->res_attr[i];
if (res_attr) {
sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
kfree(res_attr);
}
res_attr = pdev->res_attr_wc[i];
if (res_attr) {
sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
kfree(res_attr);
}
}
}
static int sparse_mem_mmap_fits(struct pci_dev *pdev, int num)
{
struct pci_bus_region bar;
struct pci_controller *hose = pdev->sysdata;
long dense_offset;
unsigned long sparse_size;
pcibios_resource_to_bus(pdev->bus, &bar, &pdev->resource[num]);
/* All core logic chips have 4G sparse address space, except
CIA which has 16G (see xxx_SPARSE_MEM and xxx_DENSE_MEM
definitions in asm/core_xxx.h files). This corresponds
to 128M or 512M of the bus space. */
dense_offset = (long)(hose->dense_mem_base - hose->sparse_mem_base);
sparse_size = dense_offset >= 0x400000000UL ? 0x20000000 : 0x8000000;
return bar.end < sparse_size;
}
static int pci_create_one_attr(struct pci_dev *pdev, int num, char *name,
char *suffix, struct bin_attribute *res_attr,
unsigned long sparse)
{
size_t size = pci_resource_len(pdev, num);
sprintf(name, "resource%d%s", num, suffix);
res_attr->mmap = sparse ? pci_mmap_resource_sparse :
pci_mmap_resource_dense;
res_attr->attr.name = name;
res_attr->attr.mode = S_IRUSR | S_IWUSR;
res_attr->size = sparse ? size << 5 : size;
res_attr->private = &pdev->resource[num];
return sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
}
static int pci_create_attr(struct pci_dev *pdev, int num)
{
/* allocate attribute structure, piggyback attribute name */
int retval, nlen1, nlen2 = 0, res_count = 1;
unsigned long sparse_base, dense_base;
struct bin_attribute *attr;
struct pci_controller *hose = pdev->sysdata;
char *suffix, *attr_name;
suffix = ""; /* Assume bwx machine, normal resourceN files. */
nlen1 = 10;
if (pdev->resource[num].flags & IORESOURCE_MEM) {
sparse_base = hose->sparse_mem_base;
dense_base = hose->dense_mem_base;
if (sparse_base && !sparse_mem_mmap_fits(pdev, num)) {
sparse_base = 0;
suffix = "_dense";
nlen1 = 16; /* resourceN_dense */
}
} else {
sparse_base = hose->sparse_io_base;
dense_base = hose->dense_io_base;
}
if (sparse_base) {
suffix = "_sparse";
nlen1 = 17;
if (dense_base) {
nlen2 = 16; /* resourceN_dense */
res_count = 2;
}
}
attr = kzalloc(sizeof(*attr) * res_count + nlen1 + nlen2, GFP_ATOMIC);
if (!attr)
return -ENOMEM;
/* Create bwx, sparse or single dense file */
attr_name = (char *)(attr + res_count);
pdev->res_attr[num] = attr;
retval = pci_create_one_attr(pdev, num, attr_name, suffix, attr,
sparse_base);
if (retval || res_count == 1)
return retval;
/* Create dense file */
attr_name += nlen1;
attr++;
pdev->res_attr_wc[num] = attr;
return pci_create_one_attr(pdev, num, attr_name, "_dense", attr, 0);
}
/**
* pci_create_resource_files - create resource files in sysfs for @dev
* @dev: dev in question
*
* Walk the resources in @dev creating files for each resource available.
*/
int pci_create_resource_files(struct pci_dev *pdev)
{
int i;
int retval;
/* Expose the PCI resources from this device as files */
for (i = 0; i < PCI_ROM_RESOURCE; i++) {
/* skip empty resources */
if (!pci_resource_len(pdev, i))
continue;
retval = pci_create_attr(pdev, i);
if (retval) {
pci_remove_resource_files(pdev);
return retval;
}
}
return 0;
}
/* Legacy I/O bus mapping stuff. */
static int __legacy_mmap_fits(struct pci_controller *hose,
struct vm_area_struct *vma,
unsigned long res_size, int sparse)
{
unsigned long nr, start, size;
nr = vma_pages(vma);
start = vma->vm_pgoff;
size = ((res_size - 1) >> PAGE_SHIFT) + 1;
if (start < size && size - start >= nr)
return 1;
WARN(1, "process \"%s\" tried to map%s 0x%08lx-0x%08lx on hose %d "
"(size 0x%08lx)\n",
current->comm, sparse ? " sparse" : "", start, start + nr,
hose->index, size);
return 0;
}
static inline int has_sparse(struct pci_controller *hose,
enum pci_mmap_state mmap_type)
{
unsigned long base;
base = (mmap_type == pci_mmap_mem) ? hose->sparse_mem_base :
hose->sparse_io_base;
return base != 0;
}
int pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma,
enum pci_mmap_state mmap_type)
{
struct pci_controller *hose = bus->sysdata;
int sparse = has_sparse(hose, mmap_type);
unsigned long res_size;
res_size = (mmap_type == pci_mmap_mem) ? bus->legacy_mem->size :
bus->legacy_io->size;
if (!__legacy_mmap_fits(hose, vma, res_size, sparse))
return -EINVAL;
return hose_mmap_page_range(hose, vma, mmap_type, sparse);
}
/**
* pci_adjust_legacy_attr - adjustment of legacy file attributes
* @b: bus to create files under
* @mmap_type: I/O port or memory
*
* Adjust file name and size for sparse mappings.
*/
void pci_adjust_legacy_attr(struct pci_bus *bus, enum pci_mmap_state mmap_type)
{
struct pci_controller *hose = bus->sysdata;
if (!has_sparse(hose, mmap_type))
return;
if (mmap_type == pci_mmap_mem) {
bus->legacy_mem->attr.name = "legacy_mem_sparse";
bus->legacy_mem->size <<= 5;
} else {
bus->legacy_io->attr.name = "legacy_io_sparse";
bus->legacy_io->size <<= 5;
}
return;
}
/* Legacy I/O bus read/write functions */
int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, size_t size)
{
struct pci_controller *hose = bus->sysdata;
port += hose->io_space->start;
switch(size) {
case 1:
*((u8 *)val) = inb(port);
return 1;
case 2:
if (port & 1)
return -EINVAL;
*((u16 *)val) = inw(port);
return 2;
case 4:
if (port & 3)
return -EINVAL;
*((u32 *)val) = inl(port);
return 4;
}
return -EINVAL;
}
int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, size_t size)
{
struct pci_controller *hose = bus->sysdata;
port += hose->io_space->start;
switch(size) {
case 1:
outb(port, val);
return 1;
case 2:
if (port & 1)
return -EINVAL;
outw(port, val);
return 2;
case 4:
if (port & 3)
return -EINVAL;
outl(port, val);
return 4;
}
return -EINVAL;
}