kernel-fxtec-pro1x/arch/alpha/kernel/core_wildfire.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

658 lines
17 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// SPDX-License-Identifier: GPL-2.0
/*
* linux/arch/alpha/kernel/core_wildfire.c
*
* Wildfire support.
*
* Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
*/
#define __EXTERN_INLINE inline
#include <asm/io.h>
#include <asm/core_wildfire.h>
#undef __EXTERN_INLINE
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <asm/ptrace.h>
#include <asm/smp.h>
#include "proto.h"
#include "pci_impl.h"
#define DEBUG_CONFIG 0
#define DEBUG_DUMP_REGS 0
#define DEBUG_DUMP_CONFIG 1
#if DEBUG_CONFIG
# define DBG_CFG(args) printk args
#else
# define DBG_CFG(args)
#endif
#if DEBUG_DUMP_REGS
static void wildfire_dump_pci_regs(int qbbno, int hoseno);
static void wildfire_dump_pca_regs(int qbbno, int pcano);
static void wildfire_dump_qsa_regs(int qbbno);
static void wildfire_dump_qsd_regs(int qbbno);
static void wildfire_dump_iop_regs(int qbbno);
static void wildfire_dump_gp_regs(int qbbno);
#endif
#if DEBUG_DUMP_CONFIG
static void wildfire_dump_hardware_config(void);
#endif
unsigned char wildfire_hard_qbb_map[WILDFIRE_MAX_QBB];
unsigned char wildfire_soft_qbb_map[WILDFIRE_MAX_QBB];
#define QBB_MAP_EMPTY 0xff
unsigned long wildfire_hard_qbb_mask;
unsigned long wildfire_soft_qbb_mask;
unsigned long wildfire_gp_mask;
unsigned long wildfire_hs_mask;
unsigned long wildfire_iop_mask;
unsigned long wildfire_ior_mask;
unsigned long wildfire_pca_mask;
unsigned long wildfire_cpu_mask;
unsigned long wildfire_mem_mask;
void __init
wildfire_init_hose(int qbbno, int hoseno)
{
struct pci_controller *hose;
wildfire_pci *pci;
hose = alloc_pci_controller();
hose->io_space = alloc_resource();
hose->mem_space = alloc_resource();
/* This is for userland consumption. */
hose->sparse_mem_base = 0;
hose->sparse_io_base = 0;
hose->dense_mem_base = WILDFIRE_MEM(qbbno, hoseno);
hose->dense_io_base = WILDFIRE_IO(qbbno, hoseno);
hose->config_space_base = WILDFIRE_CONF(qbbno, hoseno);
hose->index = (qbbno << 3) + hoseno;
hose->io_space->start = WILDFIRE_IO(qbbno, hoseno) - WILDFIRE_IO_BIAS;
hose->io_space->end = hose->io_space->start + WILDFIRE_IO_SPACE - 1;
hose->io_space->name = pci_io_names[hoseno];
hose->io_space->flags = IORESOURCE_IO;
hose->mem_space->start = WILDFIRE_MEM(qbbno, hoseno)-WILDFIRE_MEM_BIAS;
hose->mem_space->end = hose->mem_space->start + 0xffffffff;
hose->mem_space->name = pci_mem_names[hoseno];
hose->mem_space->flags = IORESOURCE_MEM;
if (request_resource(&ioport_resource, hose->io_space) < 0)
printk(KERN_ERR "Failed to request IO on qbb %d hose %d\n",
qbbno, hoseno);
if (request_resource(&iomem_resource, hose->mem_space) < 0)
printk(KERN_ERR "Failed to request MEM on qbb %d hose %d\n",
qbbno, hoseno);
#if DEBUG_DUMP_REGS
wildfire_dump_pci_regs(qbbno, hoseno);
#endif
/*
* Set up the PCI to main memory translation windows.
*
* Note: Window 3 is scatter-gather only
*
* Window 0 is scatter-gather 8MB at 8MB (for isa)
* Window 1 is direct access 1GB at 1GB
* Window 2 is direct access 1GB at 2GB
* Window 3 is scatter-gather 128MB at 3GB
* ??? We ought to scale window 3 memory.
*
*/
hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 0);
hose->sg_pci = iommu_arena_new(hose, 0xc0000000, 0x08000000, 0);
pci = WILDFIRE_pci(qbbno, hoseno);
pci->pci_window[0].wbase.csr = hose->sg_isa->dma_base | 3;
pci->pci_window[0].wmask.csr = (hose->sg_isa->size - 1) & 0xfff00000;
pci->pci_window[0].tbase.csr = virt_to_phys(hose->sg_isa->ptes);
pci->pci_window[1].wbase.csr = 0x40000000 | 1;
pci->pci_window[1].wmask.csr = (0x40000000 -1) & 0xfff00000;
pci->pci_window[1].tbase.csr = 0;
pci->pci_window[2].wbase.csr = 0x80000000 | 1;
pci->pci_window[2].wmask.csr = (0x40000000 -1) & 0xfff00000;
pci->pci_window[2].tbase.csr = 0x40000000;
pci->pci_window[3].wbase.csr = hose->sg_pci->dma_base | 3;
pci->pci_window[3].wmask.csr = (hose->sg_pci->size - 1) & 0xfff00000;
pci->pci_window[3].tbase.csr = virt_to_phys(hose->sg_pci->ptes);
wildfire_pci_tbi(hose, 0, 0); /* Flush TLB at the end. */
}
void __init
wildfire_init_pca(int qbbno, int pcano)
{
/* Test for PCA existence first. */
if (!WILDFIRE_PCA_EXISTS(qbbno, pcano))
return;
#if DEBUG_DUMP_REGS
wildfire_dump_pca_regs(qbbno, pcano);
#endif
/* Do both hoses of the PCA. */
wildfire_init_hose(qbbno, (pcano << 1) + 0);
wildfire_init_hose(qbbno, (pcano << 1) + 1);
}
void __init
wildfire_init_qbb(int qbbno)
{
int pcano;
/* Test for QBB existence first. */
if (!WILDFIRE_QBB_EXISTS(qbbno))
return;
#if DEBUG_DUMP_REGS
wildfire_dump_qsa_regs(qbbno);
wildfire_dump_qsd_regs(qbbno);
wildfire_dump_iop_regs(qbbno);
wildfire_dump_gp_regs(qbbno);
#endif
/* Init all PCAs here. */
for (pcano = 0; pcano < WILDFIRE_PCA_PER_QBB; pcano++) {
wildfire_init_pca(qbbno, pcano);
}
}
void __init
wildfire_hardware_probe(void)
{
unsigned long temp;
unsigned int hard_qbb, soft_qbb;
wildfire_fast_qsd *fast = WILDFIRE_fast_qsd();
wildfire_qsd *qsd;
wildfire_qsa *qsa;
wildfire_iop *iop;
wildfire_gp *gp;
wildfire_ne *ne;
wildfire_fe *fe;
int i;
temp = fast->qsd_whami.csr;
#if 0
printk(KERN_ERR "fast QSD_WHAMI at base %p is 0x%lx\n", fast, temp);
#endif
hard_qbb = (temp >> 8) & 7;
soft_qbb = (temp >> 4) & 7;
/* Init the HW configuration variables. */
wildfire_hard_qbb_mask = (1 << hard_qbb);
wildfire_soft_qbb_mask = (1 << soft_qbb);
wildfire_gp_mask = 0;
wildfire_hs_mask = 0;
wildfire_iop_mask = 0;
wildfire_ior_mask = 0;
wildfire_pca_mask = 0;
wildfire_cpu_mask = 0;
wildfire_mem_mask = 0;
memset(wildfire_hard_qbb_map, QBB_MAP_EMPTY, WILDFIRE_MAX_QBB);
memset(wildfire_soft_qbb_map, QBB_MAP_EMPTY, WILDFIRE_MAX_QBB);
/* First, determine which QBBs are present. */
qsa = WILDFIRE_qsa(soft_qbb);
temp = qsa->qsa_qbb_id.csr;
#if 0
printk(KERN_ERR "QSA_QBB_ID at base %p is 0x%lx\n", qsa, temp);
#endif
if (temp & 0x40) /* Is there an HS? */
wildfire_hs_mask = 1;
if (temp & 0x20) { /* Is there a GP? */
gp = WILDFIRE_gp(soft_qbb);
temp = 0;
for (i = 0; i < 4; i++) {
temp |= gp->gpa_qbb_map[i].csr << (i * 8);
#if 0
printk(KERN_ERR "GPA_QBB_MAP[%d] at base %p is 0x%lx\n",
i, gp, temp);
#endif
}
for (hard_qbb = 0; hard_qbb < WILDFIRE_MAX_QBB; hard_qbb++) {
if (temp & 8) { /* Is there a QBB? */
soft_qbb = temp & 7;
wildfire_hard_qbb_mask |= (1 << hard_qbb);
wildfire_soft_qbb_mask |= (1 << soft_qbb);
}
temp >>= 4;
}
wildfire_gp_mask = wildfire_soft_qbb_mask;
}
/* Next determine each QBBs resources. */
for (soft_qbb = 0; soft_qbb < WILDFIRE_MAX_QBB; soft_qbb++) {
if (WILDFIRE_QBB_EXISTS(soft_qbb)) {
qsd = WILDFIRE_qsd(soft_qbb);
temp = qsd->qsd_whami.csr;
#if 0
printk(KERN_ERR "QSD_WHAMI at base %p is 0x%lx\n", qsd, temp);
#endif
hard_qbb = (temp >> 8) & 7;
wildfire_hard_qbb_map[hard_qbb] = soft_qbb;
wildfire_soft_qbb_map[soft_qbb] = hard_qbb;
qsa = WILDFIRE_qsa(soft_qbb);
temp = qsa->qsa_qbb_pop[0].csr;
#if 0
printk(KERN_ERR "QSA_QBB_POP_0 at base %p is 0x%lx\n", qsa, temp);
#endif
wildfire_cpu_mask |= ((temp >> 0) & 0xf) << (soft_qbb << 2);
wildfire_mem_mask |= ((temp >> 4) & 0xf) << (soft_qbb << 2);
temp = qsa->qsa_qbb_pop[1].csr;
#if 0
printk(KERN_ERR "QSA_QBB_POP_1 at base %p is 0x%lx\n", qsa, temp);
#endif
wildfire_iop_mask |= (1 << soft_qbb);
wildfire_ior_mask |= ((temp >> 4) & 0xf) << (soft_qbb << 2);
temp = qsa->qsa_qbb_id.csr;
#if 0
printk(KERN_ERR "QSA_QBB_ID at %p is 0x%lx\n", qsa, temp);
#endif
if (temp & 0x20)
wildfire_gp_mask |= (1 << soft_qbb);
/* Probe for PCA existence here. */
for (i = 0; i < WILDFIRE_PCA_PER_QBB; i++) {
iop = WILDFIRE_iop(soft_qbb);
ne = WILDFIRE_ne(soft_qbb, i);
fe = WILDFIRE_fe(soft_qbb, i);
if ((iop->iop_hose[i].init.csr & 1) == 1 &&
((ne->ne_what_am_i.csr & 0xf00000300UL) == 0x100000300UL) &&
((fe->fe_what_am_i.csr & 0xf00000300UL) == 0x100000200UL))
{
wildfire_pca_mask |= 1 << ((soft_qbb << 2) + i);
}
}
}
}
#if DEBUG_DUMP_CONFIG
wildfire_dump_hardware_config();
#endif
}
void __init
wildfire_init_arch(void)
{
int qbbno;
/* With multiple PCI buses, we play with I/O as physical addrs. */
ioport_resource.end = ~0UL;
/* Probe the hardware for info about configuration. */
wildfire_hardware_probe();
/* Now init all the found QBBs. */
for (qbbno = 0; qbbno < WILDFIRE_MAX_QBB; qbbno++) {
wildfire_init_qbb(qbbno);
}
/* Normal direct PCI DMA mapping. */
__direct_map_base = 0x40000000UL;
__direct_map_size = 0x80000000UL;
}
void
wildfire_machine_check(unsigned long vector, unsigned long la_ptr)
{
mb();
mb(); /* magic */
draina();
/* FIXME: clear pci errors */
wrmces(0x7);
mb();
process_mcheck_info(vector, la_ptr, "WILDFIRE",
mcheck_expected(smp_processor_id()));
}
void
wildfire_kill_arch(int mode)
{
}
void
wildfire_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
{
int qbbno = hose->index >> 3;
int hoseno = hose->index & 7;
wildfire_pci *pci = WILDFIRE_pci(qbbno, hoseno);
mb();
pci->pci_flush_tlb.csr; /* reading does the trick */
}
static int
mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
unsigned long *pci_addr, unsigned char *type1)
{
struct pci_controller *hose = pbus->sysdata;
unsigned long addr;
u8 bus = pbus->number;
DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, "
"pci_addr=0x%p, type1=0x%p)\n",
bus, device_fn, where, pci_addr, type1));
if (!pbus->parent) /* No parent means peer PCI bus. */
bus = 0;
*type1 = (bus != 0);
addr = (bus << 16) | (device_fn << 8) | where;
addr |= hose->config_space_base;
*pci_addr = addr;
DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
return 0;
}
static int
wildfire_read_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 *value)
{
unsigned long addr;
unsigned char type1;
if (mk_conf_addr(bus, devfn, where, &addr, &type1))
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
case 1:
*value = __kernel_ldbu(*(vucp)addr);
break;
case 2:
*value = __kernel_ldwu(*(vusp)addr);
break;
case 4:
*value = *(vuip)addr;
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int
wildfire_write_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 value)
{
unsigned long addr;
unsigned char type1;
if (mk_conf_addr(bus, devfn, where, &addr, &type1))
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
case 1:
__kernel_stb(value, *(vucp)addr);
mb();
__kernel_ldbu(*(vucp)addr);
break;
case 2:
__kernel_stw(value, *(vusp)addr);
mb();
__kernel_ldwu(*(vusp)addr);
break;
case 4:
*(vuip)addr = value;
mb();
*(vuip)addr;
break;
}
return PCIBIOS_SUCCESSFUL;
}
struct pci_ops wildfire_pci_ops =
{
.read = wildfire_read_config,
.write = wildfire_write_config,
};
/*
* NUMA Support
*/
int wildfire_pa_to_nid(unsigned long pa)
{
return pa >> 36;
}
int wildfire_cpuid_to_nid(int cpuid)
{
/* assume 4 CPUs per node */
return cpuid >> 2;
}
unsigned long wildfire_node_mem_start(int nid)
{
/* 64GB per node */
return (unsigned long)nid * (64UL * 1024 * 1024 * 1024);
}
unsigned long wildfire_node_mem_size(int nid)
{
/* 64GB per node */
return 64UL * 1024 * 1024 * 1024;
}
#if DEBUG_DUMP_REGS
static void __init
wildfire_dump_pci_regs(int qbbno, int hoseno)
{
wildfire_pci *pci = WILDFIRE_pci(qbbno, hoseno);
int i;
printk(KERN_ERR "PCI registers for QBB %d hose %d (%p)\n",
qbbno, hoseno, pci);
printk(KERN_ERR " PCI_IO_ADDR_EXT: 0x%16lx\n",
pci->pci_io_addr_ext.csr);
printk(KERN_ERR " PCI_CTRL: 0x%16lx\n", pci->pci_ctrl.csr);
printk(KERN_ERR " PCI_ERR_SUM: 0x%16lx\n", pci->pci_err_sum.csr);
printk(KERN_ERR " PCI_ERR_ADDR: 0x%16lx\n", pci->pci_err_addr.csr);
printk(KERN_ERR " PCI_STALL_CNT: 0x%16lx\n", pci->pci_stall_cnt.csr);
printk(KERN_ERR " PCI_PEND_INT: 0x%16lx\n", pci->pci_pend_int.csr);
printk(KERN_ERR " PCI_SENT_INT: 0x%16lx\n", pci->pci_sent_int.csr);
printk(KERN_ERR " DMA window registers for QBB %d hose %d (%p)\n",
qbbno, hoseno, pci);
for (i = 0; i < 4; i++) {
printk(KERN_ERR " window %d: 0x%16lx 0x%16lx 0x%16lx\n", i,
pci->pci_window[i].wbase.csr,
pci->pci_window[i].wmask.csr,
pci->pci_window[i].tbase.csr);
}
printk(KERN_ERR "\n");
}
static void __init
wildfire_dump_pca_regs(int qbbno, int pcano)
{
wildfire_pca *pca = WILDFIRE_pca(qbbno, pcano);
int i;
printk(KERN_ERR "PCA registers for QBB %d PCA %d (%p)\n",
qbbno, pcano, pca);
printk(KERN_ERR " PCA_WHAT_AM_I: 0x%16lx\n", pca->pca_what_am_i.csr);
printk(KERN_ERR " PCA_ERR_SUM: 0x%16lx\n", pca->pca_err_sum.csr);
printk(KERN_ERR " PCA_PEND_INT: 0x%16lx\n", pca->pca_pend_int.csr);
printk(KERN_ERR " PCA_SENT_INT: 0x%16lx\n", pca->pca_sent_int.csr);
printk(KERN_ERR " PCA_STDIO_EL: 0x%16lx\n",
pca->pca_stdio_edge_level.csr);
printk(KERN_ERR " PCA target registers for QBB %d PCA %d (%p)\n",
qbbno, pcano, pca);
for (i = 0; i < 4; i++) {
printk(KERN_ERR " target %d: 0x%16lx 0x%16lx\n", i,
pca->pca_int[i].target.csr,
pca->pca_int[i].enable.csr);
}
printk(KERN_ERR "\n");
}
static void __init
wildfire_dump_qsa_regs(int qbbno)
{
wildfire_qsa *qsa = WILDFIRE_qsa(qbbno);
int i;
printk(KERN_ERR "QSA registers for QBB %d (%p)\n", qbbno, qsa);
printk(KERN_ERR " QSA_QBB_ID: 0x%16lx\n", qsa->qsa_qbb_id.csr);
printk(KERN_ERR " QSA_PORT_ENA: 0x%16lx\n", qsa->qsa_port_ena.csr);
printk(KERN_ERR " QSA_REF_INT: 0x%16lx\n", qsa->qsa_ref_int.csr);
for (i = 0; i < 5; i++)
printk(KERN_ERR " QSA_CONFIG_%d: 0x%16lx\n",
i, qsa->qsa_config[i].csr);
for (i = 0; i < 2; i++)
printk(KERN_ERR " QSA_QBB_POP_%d: 0x%16lx\n",
i, qsa->qsa_qbb_pop[0].csr);
printk(KERN_ERR "\n");
}
static void __init
wildfire_dump_qsd_regs(int qbbno)
{
wildfire_qsd *qsd = WILDFIRE_qsd(qbbno);
printk(KERN_ERR "QSD registers for QBB %d (%p)\n", qbbno, qsd);
printk(KERN_ERR " QSD_WHAMI: 0x%16lx\n", qsd->qsd_whami.csr);
printk(KERN_ERR " QSD_REV: 0x%16lx\n", qsd->qsd_rev.csr);
printk(KERN_ERR " QSD_PORT_PRESENT: 0x%16lx\n",
qsd->qsd_port_present.csr);
printk(KERN_ERR " QSD_PORT_ACTUVE: 0x%16lx\n",
qsd->qsd_port_active.csr);
printk(KERN_ERR " QSD_FAULT_ENA: 0x%16lx\n",
qsd->qsd_fault_ena.csr);
printk(KERN_ERR " QSD_CPU_INT_ENA: 0x%16lx\n",
qsd->qsd_cpu_int_ena.csr);
printk(KERN_ERR " QSD_MEM_CONFIG: 0x%16lx\n",
qsd->qsd_mem_config.csr);
printk(KERN_ERR " QSD_ERR_SUM: 0x%16lx\n",
qsd->qsd_err_sum.csr);
printk(KERN_ERR "\n");
}
static void __init
wildfire_dump_iop_regs(int qbbno)
{
wildfire_iop *iop = WILDFIRE_iop(qbbno);
int i;
printk(KERN_ERR "IOP registers for QBB %d (%p)\n", qbbno, iop);
printk(KERN_ERR " IOA_CONFIG: 0x%16lx\n", iop->ioa_config.csr);
printk(KERN_ERR " IOD_CONFIG: 0x%16lx\n", iop->iod_config.csr);
printk(KERN_ERR " IOP_SWITCH_CREDITS: 0x%16lx\n",
iop->iop_switch_credits.csr);
printk(KERN_ERR " IOP_HOSE_CREDITS: 0x%16lx\n",
iop->iop_hose_credits.csr);
for (i = 0; i < 4; i++)
printk(KERN_ERR " IOP_HOSE_%d_INIT: 0x%16lx\n",
i, iop->iop_hose[i].init.csr);
for (i = 0; i < 4; i++)
printk(KERN_ERR " IOP_DEV_INT_TARGET_%d: 0x%16lx\n",
i, iop->iop_dev_int[i].target.csr);
printk(KERN_ERR "\n");
}
static void __init
wildfire_dump_gp_regs(int qbbno)
{
wildfire_gp *gp = WILDFIRE_gp(qbbno);
int i;
printk(KERN_ERR "GP registers for QBB %d (%p)\n", qbbno, gp);
for (i = 0; i < 4; i++)
printk(KERN_ERR " GPA_QBB_MAP_%d: 0x%16lx\n",
i, gp->gpa_qbb_map[i].csr);
printk(KERN_ERR " GPA_MEM_POP_MAP: 0x%16lx\n",
gp->gpa_mem_pop_map.csr);
printk(KERN_ERR " GPA_SCRATCH: 0x%16lx\n", gp->gpa_scratch.csr);
printk(KERN_ERR " GPA_DIAG: 0x%16lx\n", gp->gpa_diag.csr);
printk(KERN_ERR " GPA_CONFIG_0: 0x%16lx\n", gp->gpa_config_0.csr);
printk(KERN_ERR " GPA_INIT_ID: 0x%16lx\n", gp->gpa_init_id.csr);
printk(KERN_ERR " GPA_CONFIG_2: 0x%16lx\n", gp->gpa_config_2.csr);
printk(KERN_ERR "\n");
}
#endif /* DUMP_REGS */
#if DEBUG_DUMP_CONFIG
static void __init
wildfire_dump_hardware_config(void)
{
int i;
printk(KERN_ERR "Probed Hardware Configuration\n");
printk(KERN_ERR " hard_qbb_mask: 0x%16lx\n", wildfire_hard_qbb_mask);
printk(KERN_ERR " soft_qbb_mask: 0x%16lx\n", wildfire_soft_qbb_mask);
printk(KERN_ERR " gp_mask: 0x%16lx\n", wildfire_gp_mask);
printk(KERN_ERR " hs_mask: 0x%16lx\n", wildfire_hs_mask);
printk(KERN_ERR " iop_mask: 0x%16lx\n", wildfire_iop_mask);
printk(KERN_ERR " ior_mask: 0x%16lx\n", wildfire_ior_mask);
printk(KERN_ERR " pca_mask: 0x%16lx\n", wildfire_pca_mask);
printk(KERN_ERR " cpu_mask: 0x%16lx\n", wildfire_cpu_mask);
printk(KERN_ERR " mem_mask: 0x%16lx\n", wildfire_mem_mask);
printk(" hard_qbb_map: ");
for (i = 0; i < WILDFIRE_MAX_QBB; i++)
if (wildfire_hard_qbb_map[i] == QBB_MAP_EMPTY)
printk("--- ");
else
printk("%3d ", wildfire_hard_qbb_map[i]);
printk("\n");
printk(" soft_qbb_map: ");
for (i = 0; i < WILDFIRE_MAX_QBB; i++)
if (wildfire_soft_qbb_map[i] == QBB_MAP_EMPTY)
printk("--- ");
else
printk("%3d ", wildfire_soft_qbb_map[i]);
printk("\n");
}
#endif /* DUMP_CONFIG */