Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/arch/alpha/kernel/core_mcpcia.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

614 lines
16 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// SPDX-License-Identifier: GPL-2.0
/*
* linux/arch/alpha/kernel/core_mcpcia.c
*
* Based on code written by David A Rusling (david.rusling@reo.mts.dec.com).
*
* Code common to all MCbus-PCI Adaptor core logic chipsets
*/
#define __EXTERN_INLINE inline
#include <asm/io.h>
#include <asm/core_mcpcia.h>
#undef __EXTERN_INLINE
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <asm/ptrace.h>
#include "proto.h"
#include "pci_impl.h"
/*
* NOTE: Herein lie back-to-back mb instructions. They are magic.
* One plausible explanation is that the i/o controller does not properly
* handle the system transaction. Another involves timing. Ho hum.
*/
/*
* BIOS32-style PCI interface:
*/
#define DEBUG_CFG 0
#if DEBUG_CFG
# define DBG_CFG(args) printk args
#else
# define DBG_CFG(args)
#endif
/*
* Given a bus, device, and function number, compute resulting
* configuration space address and setup the MCPCIA_HAXR2 register
* accordingly. It is therefore not safe to have concurrent
* invocations to configuration space access routines, but there
* really shouldn't be any need for this.
*
* Type 0:
*
* 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
* 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* 31:11 Device select bit.
* 10:8 Function number
* 7:2 Register number
*
* Type 1:
*
* 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
* 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* 31:24 reserved
* 23:16 bus number (8 bits = 128 possible buses)
* 15:11 Device number (5 bits)
* 10:8 function number
* 7:2 register number
*
* Notes:
* The function number selects which function of a multi-function device
* (e.g., SCSI and Ethernet).
*
* The register selects a DWORD (32 bit) register offset. Hence it
* doesn't get shifted by 2 bits as we want to "drop" the bottom two
* bits.
*/
static unsigned int
conf_read(unsigned long addr, unsigned char type1,
struct pci_controller *hose)
{
unsigned long flags;
unsigned long mid = MCPCIA_HOSE2MID(hose->index);
unsigned int stat0, value, cpu;
cpu = smp_processor_id();
local_irq_save(flags);
DBG_CFG(("conf_read(addr=0x%lx, type1=%d, hose=%d)\n",
addr, type1, mid));
/* Reset status register to avoid losing errors. */
stat0 = *(vuip)MCPCIA_CAP_ERR(mid);
*(vuip)MCPCIA_CAP_ERR(mid) = stat0;
mb();
*(vuip)MCPCIA_CAP_ERR(mid);
DBG_CFG(("conf_read: MCPCIA_CAP_ERR(%d) was 0x%x\n", mid, stat0));
mb();
draina();
mcheck_expected(cpu) = 1;
mcheck_taken(cpu) = 0;
mcheck_extra(cpu) = mid;
mb();
/* Access configuration space. */
value = *((vuip)addr);
mb();
mb(); /* magic */
if (mcheck_taken(cpu)) {
mcheck_taken(cpu) = 0;
value = 0xffffffffU;
mb();
}
mcheck_expected(cpu) = 0;
mb();
DBG_CFG(("conf_read(): finished\n"));
local_irq_restore(flags);
return value;
}
static void
conf_write(unsigned long addr, unsigned int value, unsigned char type1,
struct pci_controller *hose)
{
unsigned long flags;
unsigned long mid = MCPCIA_HOSE2MID(hose->index);
unsigned int stat0, cpu;
cpu = smp_processor_id();
local_irq_save(flags); /* avoid getting hit by machine check */
/* Reset status register to avoid losing errors. */
stat0 = *(vuip)MCPCIA_CAP_ERR(mid);
*(vuip)MCPCIA_CAP_ERR(mid) = stat0; mb();
*(vuip)MCPCIA_CAP_ERR(mid);
DBG_CFG(("conf_write: MCPCIA CAP_ERR(%d) was 0x%x\n", mid, stat0));
draina();
mcheck_expected(cpu) = 1;
mcheck_extra(cpu) = mid;
mb();
/* Access configuration space. */
*((vuip)addr) = value;
mb();
mb(); /* magic */
*(vuip)MCPCIA_CAP_ERR(mid); /* read to force the write */
mcheck_expected(cpu) = 0;
mb();
DBG_CFG(("conf_write(): finished\n"));
local_irq_restore(flags);
}
static int
mk_conf_addr(struct pci_bus *pbus, unsigned int devfn, int where,
struct pci_controller *hose, unsigned long *pci_addr,
unsigned char *type1)
{
u8 bus = pbus->number;
unsigned long addr;
DBG_CFG(("mk_conf_addr(bus=%d,devfn=0x%x,hose=%d,where=0x%x,"
" pci_addr=0x%p, type1=0x%p)\n",
bus, devfn, hose->index, where, pci_addr, type1));
/* Type 1 configuration cycle for *ALL* busses. */
*type1 = 1;
if (!pbus->parent) /* No parent means peer PCI bus. */
bus = 0;
addr = (bus << 16) | (devfn << 8) | (where);
addr <<= 5; /* swizzle for SPARSE */
addr |= hose->config_space_base;
*pci_addr = addr;
DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
return 0;
}
static int
mcpcia_read_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 *value)
{
struct pci_controller *hose = bus->sysdata;
unsigned long addr, w;
unsigned char type1;
if (mk_conf_addr(bus, devfn, where, hose, &addr, &type1))
return PCIBIOS_DEVICE_NOT_FOUND;
addr |= (size - 1) * 8;
w = conf_read(addr, type1, hose);
switch (size) {
case 1:
*value = __kernel_extbl(w, where & 3);
break;
case 2:
*value = __kernel_extwl(w, where & 3);
break;
case 4:
*value = w;
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int
mcpcia_write_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 value)
{
struct pci_controller *hose = bus->sysdata;
unsigned long addr;
unsigned char type1;
if (mk_conf_addr(bus, devfn, where, hose, &addr, &type1))
return PCIBIOS_DEVICE_NOT_FOUND;
addr |= (size - 1) * 8;
value = __kernel_insql(value, where & 3);
conf_write(addr, value, type1, hose);
return PCIBIOS_SUCCESSFUL;
}
struct pci_ops mcpcia_pci_ops =
{
.read = mcpcia_read_config,
.write = mcpcia_write_config,
};
void
mcpcia_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
{
wmb();
*(vuip)MCPCIA_SG_TBIA(MCPCIA_HOSE2MID(hose->index)) = 0;
mb();
}
static int __init
mcpcia_probe_hose(int h)
{
int cpu = smp_processor_id();
int mid = MCPCIA_HOSE2MID(h);
unsigned int pci_rev;
/* Gotta be REAL careful. If hose is absent, we get an mcheck. */
mb();
mb();
draina();
wrmces(7);
mcheck_expected(cpu) = 2; /* indicates probing */
mcheck_taken(cpu) = 0;
mcheck_extra(cpu) = mid;
mb();
/* Access the bus revision word. */
pci_rev = *(vuip)MCPCIA_REV(mid);
mb();
mb(); /* magic */
if (mcheck_taken(cpu)) {
mcheck_taken(cpu) = 0;
pci_rev = 0xffffffff;
mb();
}
mcheck_expected(cpu) = 0;
mb();
return (pci_rev >> 16) == PCI_CLASS_BRIDGE_HOST;
}
static void __init
mcpcia_new_hose(int h)
{
struct pci_controller *hose;
struct resource *io, *mem, *hae_mem;
int mid = MCPCIA_HOSE2MID(h);
hose = alloc_pci_controller();
if (h == 0)
pci_isa_hose = hose;
io = alloc_resource();
mem = alloc_resource();
hae_mem = alloc_resource();
hose->io_space = io;
hose->mem_space = hae_mem;
hose->sparse_mem_base = MCPCIA_SPARSE(mid) - IDENT_ADDR;
hose->dense_mem_base = MCPCIA_DENSE(mid) - IDENT_ADDR;
hose->sparse_io_base = MCPCIA_IO(mid) - IDENT_ADDR;
hose->dense_io_base = 0;
hose->config_space_base = MCPCIA_CONF(mid);
hose->index = h;
io->start = MCPCIA_IO(mid) - MCPCIA_IO_BIAS;
io->end = io->start + 0xffff;
io->name = pci_io_names[h];
io->flags = IORESOURCE_IO;
mem->start = MCPCIA_DENSE(mid) - MCPCIA_MEM_BIAS;
mem->end = mem->start + 0xffffffff;
mem->name = pci_mem_names[h];
mem->flags = IORESOURCE_MEM;
hae_mem->start = mem->start;
hae_mem->end = mem->start + MCPCIA_MEM_MASK;
hae_mem->name = pci_hae0_name;
hae_mem->flags = IORESOURCE_MEM;
if (request_resource(&ioport_resource, io) < 0)
printk(KERN_ERR "Failed to request IO on hose %d\n", h);
if (request_resource(&iomem_resource, mem) < 0)
printk(KERN_ERR "Failed to request MEM on hose %d\n", h);
if (request_resource(mem, hae_mem) < 0)
printk(KERN_ERR "Failed to request HAE_MEM on hose %d\n", h);
}
static void
mcpcia_pci_clr_err(int mid)
{
*(vuip)MCPCIA_CAP_ERR(mid);
*(vuip)MCPCIA_CAP_ERR(mid) = 0xffffffff; /* Clear them all. */
mb();
*(vuip)MCPCIA_CAP_ERR(mid); /* Re-read for force write. */
}
static void __init
mcpcia_startup_hose(struct pci_controller *hose)
{
int mid = MCPCIA_HOSE2MID(hose->index);
unsigned int tmp;
mcpcia_pci_clr_err(mid);
/*
* Set up error reporting.
*/
tmp = *(vuip)MCPCIA_CAP_ERR(mid);
tmp |= 0x0006; /* master/target abort */
*(vuip)MCPCIA_CAP_ERR(mid) = tmp;
mb();
tmp = *(vuip)MCPCIA_CAP_ERR(mid);
/*
* Set up the PCI->physical memory translation windows.
*
* Window 0 is scatter-gather 8MB at 8MB (for isa)
* Window 1 is scatter-gather (up to) 1GB at 1GB (for pci)
* Window 2 is direct access 2GB at 2GB
*/
hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 0);
hose->sg_pci = iommu_arena_new(hose, 0x40000000,
size_for_memory(0x40000000), 0);
__direct_map_base = 0x80000000;
__direct_map_size = 0x80000000;
*(vuip)MCPCIA_W0_BASE(mid) = hose->sg_isa->dma_base | 3;
*(vuip)MCPCIA_W0_MASK(mid) = (hose->sg_isa->size - 1) & 0xfff00000;
*(vuip)MCPCIA_T0_BASE(mid) = virt_to_phys(hose->sg_isa->ptes) >> 8;
*(vuip)MCPCIA_W1_BASE(mid) = hose->sg_pci->dma_base | 3;
*(vuip)MCPCIA_W1_MASK(mid) = (hose->sg_pci->size - 1) & 0xfff00000;
*(vuip)MCPCIA_T1_BASE(mid) = virt_to_phys(hose->sg_pci->ptes) >> 8;
*(vuip)MCPCIA_W2_BASE(mid) = __direct_map_base | 1;
*(vuip)MCPCIA_W2_MASK(mid) = (__direct_map_size - 1) & 0xfff00000;
*(vuip)MCPCIA_T2_BASE(mid) = 0;
*(vuip)MCPCIA_W3_BASE(mid) = 0x0;
mcpcia_pci_tbi(hose, 0, -1);
*(vuip)MCPCIA_HBASE(mid) = 0x0;
mb();
*(vuip)MCPCIA_HAE_MEM(mid) = 0U;
mb();
*(vuip)MCPCIA_HAE_MEM(mid); /* read it back. */
*(vuip)MCPCIA_HAE_IO(mid) = 0;
mb();
*(vuip)MCPCIA_HAE_IO(mid); /* read it back. */
}
void __init
mcpcia_init_arch(void)
{
/* With multiple PCI busses, we play with I/O as physical addrs. */
ioport_resource.end = ~0UL;
/* Allocate hose 0. That's the one that all the ISA junk hangs
off of, from which we'll be registering stuff here in a bit.
Other hose detection is done in mcpcia_init_hoses, which is
called from init_IRQ. */
mcpcia_new_hose(0);
}
/* This is called from init_IRQ, since we cannot take interrupts
before then. Which means we cannot do this in init_arch. */
void __init
mcpcia_init_hoses(void)
{
struct pci_controller *hose;
int hose_count;
int h;
/* First, find how many hoses we have. */
hose_count = 0;
for (h = 0; h < MCPCIA_MAX_HOSES; ++h) {
if (mcpcia_probe_hose(h)) {
if (h != 0)
mcpcia_new_hose(h);
hose_count++;
}
}
printk("mcpcia_init_hoses: found %d hoses\n", hose_count);
/* Now do init for each hose. */
for (hose = hose_head; hose; hose = hose->next)
mcpcia_startup_hose(hose);
}
static void
mcpcia_print_uncorrectable(struct el_MCPCIA_uncorrected_frame_mcheck *logout)
{
struct el_common_EV5_uncorrectable_mcheck *frame;
int i;
frame = &logout->procdata;
/* Print PAL fields */
for (i = 0; i < 24; i += 2) {
printk(" paltmp[%d-%d] = %16lx %16lx\n",
i, i+1, frame->paltemp[i], frame->paltemp[i+1]);
}
for (i = 0; i < 8; i += 2) {
printk(" shadow[%d-%d] = %16lx %16lx\n",
i, i+1, frame->shadow[i],
frame->shadow[i+1]);
}
printk(" Addr of excepting instruction = %16lx\n",
frame->exc_addr);
printk(" Summary of arithmetic traps = %16lx\n",
frame->exc_sum);
printk(" Exception mask = %16lx\n",
frame->exc_mask);
printk(" Base address for PALcode = %16lx\n",
frame->pal_base);
printk(" Interrupt Status Reg = %16lx\n",
frame->isr);
printk(" CURRENT SETUP OF EV5 IBOX = %16lx\n",
frame->icsr);
printk(" I-CACHE Reg %s parity error = %16lx\n",
(frame->ic_perr_stat & 0x800L) ?
"Data" : "Tag",
frame->ic_perr_stat);
printk(" D-CACHE error Reg = %16lx\n",
frame->dc_perr_stat);
if (frame->dc_perr_stat & 0x2) {
switch (frame->dc_perr_stat & 0x03c) {
case 8:
printk(" Data error in bank 1\n");
break;
case 4:
printk(" Data error in bank 0\n");
break;
case 20:
printk(" Tag error in bank 1\n");
break;
case 10:
printk(" Tag error in bank 0\n");
break;
}
}
printk(" Effective VA = %16lx\n",
frame->va);
printk(" Reason for D-stream = %16lx\n",
frame->mm_stat);
printk(" EV5 SCache address = %16lx\n",
frame->sc_addr);
printk(" EV5 SCache TAG/Data parity = %16lx\n",
frame->sc_stat);
printk(" EV5 BC_TAG_ADDR = %16lx\n",
frame->bc_tag_addr);
printk(" EV5 EI_ADDR: Phys addr of Xfer = %16lx\n",
frame->ei_addr);
printk(" Fill Syndrome = %16lx\n",
frame->fill_syndrome);
printk(" EI_STAT reg = %16lx\n",
frame->ei_stat);
printk(" LD_LOCK = %16lx\n",
frame->ld_lock);
}
static void
mcpcia_print_system_area(unsigned long la_ptr)
{
struct el_common *frame;
struct pci_controller *hose;
struct IOD_subpacket {
unsigned long base;
unsigned int whoami;
unsigned int rsvd1;
unsigned int pci_rev;
unsigned int cap_ctrl;
unsigned int hae_mem;
unsigned int hae_io;
unsigned int int_ctl;
unsigned int int_reg;
unsigned int int_mask0;
unsigned int int_mask1;
unsigned int mc_err0;
unsigned int mc_err1;
unsigned int cap_err;
unsigned int rsvd2;
unsigned int pci_err1;
unsigned int mdpa_stat;
unsigned int mdpa_syn;
unsigned int mdpb_stat;
unsigned int mdpb_syn;
unsigned int rsvd3;
unsigned int rsvd4;
unsigned int rsvd5;
} *iodpp;
frame = (struct el_common *)la_ptr;
iodpp = (struct IOD_subpacket *) (la_ptr + frame->sys_offset);
for (hose = hose_head; hose; hose = hose->next, iodpp++) {
printk("IOD %d Register Subpacket - Bridge Base Address %16lx\n",
hose->index, iodpp->base);
printk(" WHOAMI = %8x\n", iodpp->whoami);
printk(" PCI_REV = %8x\n", iodpp->pci_rev);
printk(" CAP_CTRL = %8x\n", iodpp->cap_ctrl);
printk(" HAE_MEM = %8x\n", iodpp->hae_mem);
printk(" HAE_IO = %8x\n", iodpp->hae_io);
printk(" INT_CTL = %8x\n", iodpp->int_ctl);
printk(" INT_REG = %8x\n", iodpp->int_reg);
printk(" INT_MASK0 = %8x\n", iodpp->int_mask0);
printk(" INT_MASK1 = %8x\n", iodpp->int_mask1);
printk(" MC_ERR0 = %8x\n", iodpp->mc_err0);
printk(" MC_ERR1 = %8x\n", iodpp->mc_err1);
printk(" CAP_ERR = %8x\n", iodpp->cap_err);
printk(" PCI_ERR1 = %8x\n", iodpp->pci_err1);
printk(" MDPA_STAT = %8x\n", iodpp->mdpa_stat);
printk(" MDPA_SYN = %8x\n", iodpp->mdpa_syn);
printk(" MDPB_STAT = %8x\n", iodpp->mdpb_stat);
printk(" MDPB_SYN = %8x\n", iodpp->mdpb_syn);
}
}
void
mcpcia_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_MCPCIA_uncorrected_frame_mcheck *mchk_logout;
unsigned int cpu = smp_processor_id();
int expected;
mchk_logout = (struct el_MCPCIA_uncorrected_frame_mcheck *)la_ptr;
expected = mcheck_expected(cpu);
mb();
mb(); /* magic */
draina();
switch (expected) {
case 0:
{
/* FIXME: how do we figure out which hose the
error was on? */
struct pci_controller *hose;
for (hose = hose_head; hose; hose = hose->next)
mcpcia_pci_clr_err(MCPCIA_HOSE2MID(hose->index));
break;
}
case 1:
mcpcia_pci_clr_err(mcheck_extra(cpu));
break;
default:
/* Otherwise, we're being called from mcpcia_probe_hose
and there's no hose clear an error from. */
break;
}
wrmces(0x7);
mb();
process_mcheck_info(vector, la_ptr, "MCPCIA", expected != 0);
if (!expected && vector != 0x620 && vector != 0x630) {
mcpcia_print_uncorrectable(mchk_logout);
mcpcia_print_system_area(la_ptr);
}
}
Reference in a new issue View git blame Copy permalink