e0868e6f67
The reason this was not done so far was lack of genuine IPI_IRQ for ARC700, as we don't have a SMP version of core yet (which might change soon thx to EZChip). Nevertheles to increase the build coverage, we need to allow CONFIG_SMP for ARC700 and still be able to run it on a UP platform (nsim or AXS101) with a UP Device Tree (SMP-on-UP) The build itself requires some define for IPI_IRQ and even a dummy value is fine since that code won't run anyways. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
161 lines
4.4 KiB
C
161 lines
4.4 KiB
C
/*
|
|
* Copyright (C) 2011-12 Synopsys, Inc. (www.synopsys.com)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/irqchip.h>
|
|
#include <asm/irq.h>
|
|
|
|
/*
|
|
* Early Hardware specific Interrupt setup
|
|
* -Platform independent, needed for each CPU (not foldable into init_IRQ)
|
|
* -Called very early (start_kernel -> setup_arch -> setup_processor)
|
|
*
|
|
* what it does ?
|
|
* -Optionally, setup the High priority Interrupts as Level 2 IRQs
|
|
*/
|
|
void arc_init_IRQ(void)
|
|
{
|
|
int level_mask = 0;
|
|
|
|
/* setup any high priority Interrupts (Level2 in ARCompact jargon) */
|
|
level_mask |= IS_ENABLED(CONFIG_ARC_IRQ3_LV2) << 3;
|
|
level_mask |= IS_ENABLED(CONFIG_ARC_IRQ5_LV2) << 5;
|
|
level_mask |= IS_ENABLED(CONFIG_ARC_IRQ6_LV2) << 6;
|
|
|
|
/*
|
|
* Write to register, even if no LV2 IRQs configured to reset it
|
|
* in case bootloader had mucked with it
|
|
*/
|
|
write_aux_reg(AUX_IRQ_LEV, level_mask);
|
|
|
|
if (level_mask)
|
|
pr_info("Level-2 interrupts bitset %x\n", level_mask);
|
|
}
|
|
|
|
/*
|
|
* ARC700 core includes a simple on-chip intc supporting
|
|
* -per IRQ enable/disable
|
|
* -2 levels of interrupts (high/low)
|
|
* -all interrupts being level triggered
|
|
*
|
|
* To reduce platform code, we assume all IRQs directly hooked-up into intc.
|
|
* Platforms with external intc, hence cascaded IRQs, are free to over-ride
|
|
* below, per IRQ.
|
|
*/
|
|
|
|
static void arc_irq_mask(struct irq_data *data)
|
|
{
|
|
unsigned int ienb;
|
|
|
|
ienb = read_aux_reg(AUX_IENABLE);
|
|
ienb &= ~(1 << data->irq);
|
|
write_aux_reg(AUX_IENABLE, ienb);
|
|
}
|
|
|
|
static void arc_irq_unmask(struct irq_data *data)
|
|
{
|
|
unsigned int ienb;
|
|
|
|
ienb = read_aux_reg(AUX_IENABLE);
|
|
ienb |= (1 << data->irq);
|
|
write_aux_reg(AUX_IENABLE, ienb);
|
|
}
|
|
|
|
static struct irq_chip onchip_intc = {
|
|
.name = "ARC In-core Intc",
|
|
.irq_mask = arc_irq_mask,
|
|
.irq_unmask = arc_irq_unmask,
|
|
};
|
|
|
|
static int arc_intc_domain_map(struct irq_domain *d, unsigned int irq,
|
|
irq_hw_number_t hw)
|
|
{
|
|
switch (irq) {
|
|
case TIMER0_IRQ:
|
|
#ifdef CONFIG_SMP
|
|
case IPI_IRQ:
|
|
#endif
|
|
irq_set_chip_and_handler(irq, &onchip_intc, handle_percpu_irq);
|
|
break;
|
|
default:
|
|
irq_set_chip_and_handler(irq, &onchip_intc, handle_level_irq);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct irq_domain_ops arc_intc_domain_ops = {
|
|
.xlate = irq_domain_xlate_onecell,
|
|
.map = arc_intc_domain_map,
|
|
};
|
|
|
|
static struct irq_domain *root_domain;
|
|
|
|
static int __init
|
|
init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
|
|
{
|
|
if (parent)
|
|
panic("DeviceTree incore intc not a root irq controller\n");
|
|
|
|
root_domain = irq_domain_add_legacy(intc, NR_CPU_IRQS, 0, 0,
|
|
&arc_intc_domain_ops, NULL);
|
|
|
|
if (!root_domain)
|
|
panic("root irq domain not avail\n");
|
|
|
|
/* with this we don't need to export root_domain */
|
|
irq_set_default_host(root_domain);
|
|
|
|
return 0;
|
|
}
|
|
|
|
IRQCHIP_DECLARE(arc_intc, "snps,arc700-intc", init_onchip_IRQ);
|
|
|
|
/*
|
|
* arch_local_irq_enable - Enable interrupts.
|
|
*
|
|
* 1. Explicitly called to re-enable interrupts
|
|
* 2. Implicitly called from spin_unlock_irq, write_unlock_irq etc
|
|
* which maybe in hard ISR itself
|
|
*
|
|
* Semantics of this function change depending on where it is called from:
|
|
*
|
|
* -If called from hard-ISR, it must not invert interrupt priorities
|
|
* e.g. suppose TIMER is high priority (Level 2) IRQ
|
|
* Time hard-ISR, timer_interrupt( ) calls spin_unlock_irq several times.
|
|
* Here local_irq_enable( ) shd not re-enable lower priority interrupts
|
|
* -If called from soft-ISR, it must re-enable all interrupts
|
|
* soft ISR are low prioity jobs which can be very slow, thus all IRQs
|
|
* must be enabled while they run.
|
|
* Now hardware context wise we may still be in L2 ISR (not done rtie)
|
|
* still we must re-enable both L1 and L2 IRQs
|
|
* Another twist is prev scenario with flow being
|
|
* L1 ISR ==> interrupted by L2 ISR ==> L2 soft ISR
|
|
* here we must not re-enable Ll as prev Ll Interrupt's h/w context will get
|
|
* over-written (this is deficiency in ARC700 Interrupt mechanism)
|
|
*/
|
|
|
|
#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS /* Complex version for 2 IRQ levels */
|
|
|
|
void arch_local_irq_enable(void)
|
|
{
|
|
unsigned long flags = arch_local_save_flags();
|
|
|
|
if (flags & STATUS_A2_MASK)
|
|
flags |= STATUS_E2_MASK;
|
|
else if (flags & STATUS_A1_MASK)
|
|
flags |= STATUS_E1_MASK;
|
|
|
|
arch_local_irq_restore(flags);
|
|
}
|
|
|
|
EXPORT_SYMBOL(arch_local_irq_enable);
|
|
#endif
|