6384fdadb4
Avoid potential naming confliction since multiple architecture will be built in a single kernel. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
508 lines
12 KiB
C
508 lines
12 KiB
C
/*
|
|
* linux/arch/arm/mach-pxa/lpd270.c
|
|
*
|
|
* Support for the LogicPD PXA270 Card Engine.
|
|
* Derived from the mainstone code, which carries these notices:
|
|
*
|
|
* Author: Nicolas Pitre
|
|
* Created: Nov 05, 2002
|
|
* Copyright: MontaVista Software Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/gpio.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/syscore_ops.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/pwm_backlight.h>
|
|
|
|
#include <asm/types.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/mach-types.h>
|
|
#include <mach/hardware.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/sizes.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/irq.h>
|
|
#include <asm/mach/flash.h>
|
|
|
|
#include <mach/pxa27x.h>
|
|
#include <mach/lpd270.h>
|
|
#include <mach/audio.h>
|
|
#include <mach/pxafb.h>
|
|
#include <mach/mmc.h>
|
|
#include <mach/irda.h>
|
|
#include <mach/ohci.h>
|
|
#include <mach/smemc.h>
|
|
|
|
#include "generic.h"
|
|
#include "devices.h"
|
|
|
|
static unsigned long lpd270_pin_config[] __initdata = {
|
|
/* Chip Selects */
|
|
GPIO15_nCS_1, /* Mainboard Flash */
|
|
GPIO78_nCS_2, /* CPLD + Ethernet */
|
|
|
|
/* LCD - 16bpp Active TFT */
|
|
GPIO58_LCD_LDD_0,
|
|
GPIO59_LCD_LDD_1,
|
|
GPIO60_LCD_LDD_2,
|
|
GPIO61_LCD_LDD_3,
|
|
GPIO62_LCD_LDD_4,
|
|
GPIO63_LCD_LDD_5,
|
|
GPIO64_LCD_LDD_6,
|
|
GPIO65_LCD_LDD_7,
|
|
GPIO66_LCD_LDD_8,
|
|
GPIO67_LCD_LDD_9,
|
|
GPIO68_LCD_LDD_10,
|
|
GPIO69_LCD_LDD_11,
|
|
GPIO70_LCD_LDD_12,
|
|
GPIO71_LCD_LDD_13,
|
|
GPIO72_LCD_LDD_14,
|
|
GPIO73_LCD_LDD_15,
|
|
GPIO74_LCD_FCLK,
|
|
GPIO75_LCD_LCLK,
|
|
GPIO76_LCD_PCLK,
|
|
GPIO77_LCD_BIAS,
|
|
GPIO16_PWM0_OUT, /* Backlight */
|
|
|
|
/* USB Host */
|
|
GPIO88_USBH1_PWR,
|
|
GPIO89_USBH1_PEN,
|
|
|
|
/* AC97 */
|
|
GPIO28_AC97_BITCLK,
|
|
GPIO29_AC97_SDATA_IN_0,
|
|
GPIO30_AC97_SDATA_OUT,
|
|
GPIO31_AC97_SYNC,
|
|
GPIO45_AC97_SYSCLK,
|
|
|
|
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
|
|
};
|
|
|
|
static unsigned int lpd270_irq_enabled;
|
|
|
|
static void lpd270_mask_irq(struct irq_data *d)
|
|
{
|
|
int lpd270_irq = d->irq - LPD270_IRQ(0);
|
|
|
|
__raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
|
|
|
|
lpd270_irq_enabled &= ~(1 << lpd270_irq);
|
|
__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
|
|
}
|
|
|
|
static void lpd270_unmask_irq(struct irq_data *d)
|
|
{
|
|
int lpd270_irq = d->irq - LPD270_IRQ(0);
|
|
|
|
lpd270_irq_enabled |= 1 << lpd270_irq;
|
|
__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
|
|
}
|
|
|
|
static struct irq_chip lpd270_irq_chip = {
|
|
.name = "CPLD",
|
|
.irq_ack = lpd270_mask_irq,
|
|
.irq_mask = lpd270_mask_irq,
|
|
.irq_unmask = lpd270_unmask_irq,
|
|
};
|
|
|
|
static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
unsigned long pending;
|
|
|
|
pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
|
|
do {
|
|
/* clear useless edge notification */
|
|
desc->irq_data.chip->irq_ack(&desc->irq_data);
|
|
if (likely(pending)) {
|
|
irq = LPD270_IRQ(0) + __ffs(pending);
|
|
generic_handle_irq(irq);
|
|
|
|
pending = __raw_readw(LPD270_INT_STATUS) &
|
|
lpd270_irq_enabled;
|
|
}
|
|
} while (pending);
|
|
}
|
|
|
|
static void __init lpd270_init_irq(void)
|
|
{
|
|
int irq;
|
|
|
|
pxa27x_init_irq();
|
|
|
|
__raw_writew(0, LPD270_INT_MASK);
|
|
__raw_writew(0, LPD270_INT_STATUS);
|
|
|
|
/* setup extra LogicPD PXA270 irqs */
|
|
for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
|
|
irq_set_chip_and_handler(irq, &lpd270_irq_chip,
|
|
handle_level_irq);
|
|
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
|
|
}
|
|
irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lpd270_irq_handler);
|
|
irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_PM
|
|
static void lpd270_irq_resume(void)
|
|
{
|
|
__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
|
|
}
|
|
|
|
static struct syscore_ops lpd270_irq_syscore_ops = {
|
|
.resume = lpd270_irq_resume,
|
|
};
|
|
|
|
static int __init lpd270_irq_device_init(void)
|
|
{
|
|
if (machine_is_logicpd_pxa270()) {
|
|
register_syscore_ops(&lpd270_irq_syscore_ops);
|
|
return 0;
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
device_initcall(lpd270_irq_device_init);
|
|
#endif
|
|
|
|
|
|
static struct resource smc91x_resources[] = {
|
|
[0] = {
|
|
.start = LPD270_ETH_PHYS,
|
|
.end = (LPD270_ETH_PHYS + 0xfffff),
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = LPD270_ETHERNET_IRQ,
|
|
.end = LPD270_ETHERNET_IRQ,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device smc91x_device = {
|
|
.name = "smc91x",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(smc91x_resources),
|
|
.resource = smc91x_resources,
|
|
};
|
|
|
|
static struct resource lpd270_flash_resources[] = {
|
|
[0] = {
|
|
.start = PXA_CS0_PHYS,
|
|
.end = PXA_CS0_PHYS + SZ_64M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = PXA_CS1_PHYS,
|
|
.end = PXA_CS1_PHYS + SZ_64M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct mtd_partition lpd270_flash0_partitions[] = {
|
|
{
|
|
.name = "Bootloader",
|
|
.size = 0x00040000,
|
|
.offset = 0,
|
|
.mask_flags = MTD_WRITEABLE /* force read-only */
|
|
}, {
|
|
.name = "Kernel",
|
|
.size = 0x00400000,
|
|
.offset = 0x00040000,
|
|
}, {
|
|
.name = "Filesystem",
|
|
.size = MTDPART_SIZ_FULL,
|
|
.offset = 0x00440000
|
|
},
|
|
};
|
|
|
|
static struct flash_platform_data lpd270_flash_data[2] = {
|
|
{
|
|
.name = "processor-flash",
|
|
.map_name = "cfi_probe",
|
|
.parts = lpd270_flash0_partitions,
|
|
.nr_parts = ARRAY_SIZE(lpd270_flash0_partitions),
|
|
}, {
|
|
.name = "mainboard-flash",
|
|
.map_name = "cfi_probe",
|
|
.parts = NULL,
|
|
.nr_parts = 0,
|
|
}
|
|
};
|
|
|
|
static struct platform_device lpd270_flash_device[2] = {
|
|
{
|
|
.name = "pxa2xx-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &lpd270_flash_data[0],
|
|
},
|
|
.resource = &lpd270_flash_resources[0],
|
|
.num_resources = 1,
|
|
}, {
|
|
.name = "pxa2xx-flash",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &lpd270_flash_data[1],
|
|
},
|
|
.resource = &lpd270_flash_resources[1],
|
|
.num_resources = 1,
|
|
},
|
|
};
|
|
|
|
static struct platform_pwm_backlight_data lpd270_backlight_data = {
|
|
.pwm_id = 0,
|
|
.max_brightness = 1,
|
|
.dft_brightness = 1,
|
|
.pwm_period_ns = 78770,
|
|
};
|
|
|
|
static struct platform_device lpd270_backlight_device = {
|
|
.name = "pwm-backlight",
|
|
.dev = {
|
|
.parent = &pxa27x_device_pwm0.dev,
|
|
.platform_data = &lpd270_backlight_data,
|
|
},
|
|
};
|
|
|
|
/* 5.7" TFT QVGA (LoLo display number 1) */
|
|
static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
|
|
.pixclock = 150000,
|
|
.xres = 320,
|
|
.yres = 240,
|
|
.bpp = 16,
|
|
.hsync_len = 0x14,
|
|
.left_margin = 0x28,
|
|
.right_margin = 0x0a,
|
|
.vsync_len = 0x02,
|
|
.upper_margin = 0x08,
|
|
.lower_margin = 0x14,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
};
|
|
|
|
static struct pxafb_mach_info sharp_lq057q3dc02 = {
|
|
.modes = &sharp_lq057q3dc02_mode,
|
|
.num_modes = 1,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
|
|
LCD_ALTERNATE_MAPPING,
|
|
};
|
|
|
|
/* 12.1" TFT SVGA (LoLo display number 2) */
|
|
static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
|
|
.pixclock = 50000,
|
|
.xres = 800,
|
|
.yres = 600,
|
|
.bpp = 16,
|
|
.hsync_len = 0x05,
|
|
.left_margin = 0x52,
|
|
.right_margin = 0x05,
|
|
.vsync_len = 0x04,
|
|
.upper_margin = 0x14,
|
|
.lower_margin = 0x0a,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
};
|
|
|
|
static struct pxafb_mach_info sharp_lq121s1dg31 = {
|
|
.modes = &sharp_lq121s1dg31_mode,
|
|
.num_modes = 1,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
|
|
LCD_ALTERNATE_MAPPING,
|
|
};
|
|
|
|
/* 3.6" TFT QVGA (LoLo display number 3) */
|
|
static struct pxafb_mode_info sharp_lq036q1da01_mode = {
|
|
.pixclock = 150000,
|
|
.xres = 320,
|
|
.yres = 240,
|
|
.bpp = 16,
|
|
.hsync_len = 0x0e,
|
|
.left_margin = 0x04,
|
|
.right_margin = 0x0a,
|
|
.vsync_len = 0x03,
|
|
.upper_margin = 0x03,
|
|
.lower_margin = 0x03,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
};
|
|
|
|
static struct pxafb_mach_info sharp_lq036q1da01 = {
|
|
.modes = &sharp_lq036q1da01_mode,
|
|
.num_modes = 1,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
|
|
LCD_ALTERNATE_MAPPING,
|
|
};
|
|
|
|
/* 6.4" TFT VGA (LoLo display number 5) */
|
|
static struct pxafb_mode_info sharp_lq64d343_mode = {
|
|
.pixclock = 25000,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.bpp = 16,
|
|
.hsync_len = 0x31,
|
|
.left_margin = 0x89,
|
|
.right_margin = 0x19,
|
|
.vsync_len = 0x12,
|
|
.upper_margin = 0x22,
|
|
.lower_margin = 0x00,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
};
|
|
|
|
static struct pxafb_mach_info sharp_lq64d343 = {
|
|
.modes = &sharp_lq64d343_mode,
|
|
.num_modes = 1,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
|
|
LCD_ALTERNATE_MAPPING,
|
|
};
|
|
|
|
/* 10.4" TFT VGA (LoLo display number 7) */
|
|
static struct pxafb_mode_info sharp_lq10d368_mode = {
|
|
.pixclock = 25000,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.bpp = 16,
|
|
.hsync_len = 0x31,
|
|
.left_margin = 0x89,
|
|
.right_margin = 0x19,
|
|
.vsync_len = 0x12,
|
|
.upper_margin = 0x22,
|
|
.lower_margin = 0x00,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
};
|
|
|
|
static struct pxafb_mach_info sharp_lq10d368 = {
|
|
.modes = &sharp_lq10d368_mode,
|
|
.num_modes = 1,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
|
|
LCD_ALTERNATE_MAPPING,
|
|
};
|
|
|
|
/* 3.5" TFT QVGA (LoLo display number 8) */
|
|
static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
|
|
.pixclock = 150000,
|
|
.xres = 240,
|
|
.yres = 320,
|
|
.bpp = 16,
|
|
.hsync_len = 0x0e,
|
|
.left_margin = 0x0a,
|
|
.right_margin = 0x0a,
|
|
.vsync_len = 0x03,
|
|
.upper_margin = 0x05,
|
|
.lower_margin = 0x14,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
};
|
|
|
|
static struct pxafb_mach_info sharp_lq035q7db02_20 = {
|
|
.modes = &sharp_lq035q7db02_20_mode,
|
|
.num_modes = 1,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
|
|
LCD_ALTERNATE_MAPPING,
|
|
};
|
|
|
|
static struct pxafb_mach_info *lpd270_lcd_to_use;
|
|
|
|
static int __init lpd270_set_lcd(char *str)
|
|
{
|
|
if (!strnicmp(str, "lq057q3dc02", 11)) {
|
|
lpd270_lcd_to_use = &sharp_lq057q3dc02;
|
|
} else if (!strnicmp(str, "lq121s1dg31", 11)) {
|
|
lpd270_lcd_to_use = &sharp_lq121s1dg31;
|
|
} else if (!strnicmp(str, "lq036q1da01", 11)) {
|
|
lpd270_lcd_to_use = &sharp_lq036q1da01;
|
|
} else if (!strnicmp(str, "lq64d343", 8)) {
|
|
lpd270_lcd_to_use = &sharp_lq64d343;
|
|
} else if (!strnicmp(str, "lq10d368", 8)) {
|
|
lpd270_lcd_to_use = &sharp_lq10d368;
|
|
} else if (!strnicmp(str, "lq035q7db02-20", 14)) {
|
|
lpd270_lcd_to_use = &sharp_lq035q7db02_20;
|
|
} else {
|
|
printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
__setup("lcd=", lpd270_set_lcd);
|
|
|
|
static struct platform_device *platform_devices[] __initdata = {
|
|
&smc91x_device,
|
|
&lpd270_backlight_device,
|
|
&lpd270_flash_device[0],
|
|
&lpd270_flash_device[1],
|
|
};
|
|
|
|
static struct pxaohci_platform_data lpd270_ohci_platform_data = {
|
|
.port_mode = PMM_PERPORT_MODE,
|
|
.flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
|
|
};
|
|
|
|
static void __init lpd270_init(void)
|
|
{
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
|
|
|
|
pxa_set_ffuart_info(NULL);
|
|
pxa_set_btuart_info(NULL);
|
|
pxa_set_stuart_info(NULL);
|
|
|
|
lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
|
|
lpd270_flash_data[1].width = 4;
|
|
|
|
/*
|
|
* System bus arbiter setting:
|
|
* - Core_Park
|
|
* - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
|
|
*/
|
|
ARB_CNTRL = ARB_CORE_PARK | 0x234;
|
|
|
|
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
|
|
|
|
pxa_set_ac97_info(NULL);
|
|
|
|
if (lpd270_lcd_to_use != NULL)
|
|
pxa_set_fb_info(NULL, lpd270_lcd_to_use);
|
|
|
|
pxa_set_ohci_info(&lpd270_ohci_platform_data);
|
|
}
|
|
|
|
|
|
static struct map_desc lpd270_io_desc[] __initdata = {
|
|
{
|
|
.virtual = (unsigned long)LPD270_CPLD_VIRT,
|
|
.pfn = __phys_to_pfn(LPD270_CPLD_PHYS),
|
|
.length = LPD270_CPLD_SIZE,
|
|
.type = MT_DEVICE,
|
|
},
|
|
};
|
|
|
|
static void __init lpd270_map_io(void)
|
|
{
|
|
pxa27x_map_io();
|
|
iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
|
|
|
|
/* for use I SRAM as framebuffer. */
|
|
PSLR |= 0x00000F04;
|
|
PCFR = 0x00000066;
|
|
}
|
|
|
|
MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
|
|
/* Maintainer: Peter Barada */
|
|
.atag_offset = 0x100,
|
|
.map_io = lpd270_map_io,
|
|
.nr_irqs = LPD270_NR_IRQS,
|
|
.init_irq = lpd270_init_irq,
|
|
.handle_irq = pxa27x_handle_irq,
|
|
.timer = &pxa_timer,
|
|
.init_machine = lpd270_init,
|
|
MACHINE_END
|