kernel-fxtec-pro1x/drivers/pcmcia/sa1111_generic.c
Linus Torvalds 9e4db1c3ee Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM platform updates from Russell King:
 "This covers platform stuff for platforms I have a direct interest in
  (iow, I have the hardware).  Essentially:
   - as we no longer support any other Acorn platforms other than RiscPC
     anymore, we can collect all that code into mach-rpc.
   - convert Acorn expansion card stuff to use IRQ allocation functions,
     and get rid of NO_IRQ from there.
   - cleanups to the ebsa110 platform to move some private stuff out of
     its header files.
   - large amount of SA11x0 updates:
   - conversion of private DMA implementation to DMA engine support
     (this actually gives us greater flexibility in drivers over the old
     API.)
   - re-worked ucb1x00 updates - convert to genirq, remove sa11x0
     dependencies, fix various minor issues
   - move platform specific sa11x0 framebuffer data into platform files
     in arch/arm instead of keeping this in the driver itself
   - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA
     for SIR transmissions as well as FIR
   - rework sa1111 support for genirq, and irq allocation
   - fix sa1111 IRQ support so it works again
   - use sparse IRQ support

  After this, I have one more pull request remaining from my current
  set, which I think is going to be the most problematical as it
  generates 8 conflicts."

Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per
Russell.

* 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits)
  ARM: 7343/1: sa11x0: convert to sparse IRQ
  ARM: 7342/2: sa1100: prepare for sparse irq conversion
  ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq
  ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h
  ARM: sa11x0: remove unused DMA controller definitions
  ARM: sa11x0: remove old SoC private DMA driver
  USB: sa1111: add hcd .reset method
  USB: sa1111: add OHCI shutdown methods
  USB: sa1111: reorganize ohci-sa1111.c
  USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__)
  USB: sa1111: sparse and checkpatch cleanups
  ARM: sa11x0: don't static map sa1111
  ARM: sa1111: use dev_err() rather than printk()
  ARM: sa1111: cleanup sub-device registration and unregistration
  ARM: sa1111: only setup DMA for DMA capable devices
  ARM: sa1111: register sa1111 devices with dmabounce in bus notifier
  ARM: sa1111: move USB interface register definitions to ohci-sa1111.c
  ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c
  ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c
  ARM: sa1111: delete unused physical GPIO register definitions
  ...
2012-03-27 18:17:02 -07:00

254 lines
6.3 KiB
C

/*
* linux/drivers/pcmcia/sa1111_generic.c
*
* We implement the generic parts of a SA1111 PCMCIA driver. This
* basically means we handle everything except controlling the
* power. Power is machine specific...
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <pcmcia/ss.h>
#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
#include <asm/irq.h>
#include "sa1111_generic.h"
/*
* These are offsets from the above base.
*/
#define PCCR 0x0000
#define PCSSR 0x0004
#define PCSR 0x0008
#define PCSR_S0_READY (1<<0)
#define PCSR_S1_READY (1<<1)
#define PCSR_S0_DETECT (1<<2)
#define PCSR_S1_DETECT (1<<3)
#define PCSR_S0_VS1 (1<<4)
#define PCSR_S0_VS2 (1<<5)
#define PCSR_S1_VS1 (1<<6)
#define PCSR_S1_VS2 (1<<7)
#define PCSR_S0_WP (1<<8)
#define PCSR_S1_WP (1<<9)
#define PCSR_S0_BVD1 (1<<10)
#define PCSR_S0_BVD2 (1<<11)
#define PCSR_S1_BVD1 (1<<12)
#define PCSR_S1_BVD2 (1<<13)
#define PCCR_S0_RST (1<<0)
#define PCCR_S1_RST (1<<1)
#define PCCR_S0_FLT (1<<2)
#define PCCR_S1_FLT (1<<3)
#define PCCR_S0_PWAITEN (1<<4)
#define PCCR_S1_PWAITEN (1<<5)
#define PCCR_S0_PSE (1<<6)
#define PCCR_S1_PSE (1<<7)
#define PCSSR_S0_SLEEP (1<<0)
#define PCSSR_S1_SLEEP (1<<1)
#define IDX_IRQ_S0_READY_NINT (0)
#define IDX_IRQ_S0_CD_VALID (1)
#define IDX_IRQ_S0_BVD1_STSCHG (2)
#define IDX_IRQ_S1_READY_NINT (3)
#define IDX_IRQ_S1_CD_VALID (4)
#define IDX_IRQ_S1_BVD1_STSCHG (5)
void sa1111_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
{
struct sa1111_pcmcia_socket *s = to_skt(skt);
unsigned long status = sa1111_readl(s->dev->mapbase + PCSR);
switch (skt->nr) {
case 0:
state->detect = status & PCSR_S0_DETECT ? 0 : 1;
state->ready = status & PCSR_S0_READY ? 1 : 0;
state->bvd1 = status & PCSR_S0_BVD1 ? 1 : 0;
state->bvd2 = status & PCSR_S0_BVD2 ? 1 : 0;
state->wrprot = status & PCSR_S0_WP ? 1 : 0;
state->vs_3v = status & PCSR_S0_VS1 ? 0 : 1;
state->vs_Xv = status & PCSR_S0_VS2 ? 0 : 1;
break;
case 1:
state->detect = status & PCSR_S1_DETECT ? 0 : 1;
state->ready = status & PCSR_S1_READY ? 1 : 0;
state->bvd1 = status & PCSR_S1_BVD1 ? 1 : 0;
state->bvd2 = status & PCSR_S1_BVD2 ? 1 : 0;
state->wrprot = status & PCSR_S1_WP ? 1 : 0;
state->vs_3v = status & PCSR_S1_VS1 ? 0 : 1;
state->vs_Xv = status & PCSR_S1_VS2 ? 0 : 1;
break;
}
}
int sa1111_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
{
struct sa1111_pcmcia_socket *s = to_skt(skt);
unsigned int pccr_skt_mask, pccr_set_mask, val;
unsigned long flags;
switch (skt->nr) {
case 0:
pccr_skt_mask = PCCR_S0_RST|PCCR_S0_FLT|PCCR_S0_PWAITEN|PCCR_S0_PSE;
break;
case 1:
pccr_skt_mask = PCCR_S1_RST|PCCR_S1_FLT|PCCR_S1_PWAITEN|PCCR_S1_PSE;
break;
default:
return -1;
}
pccr_set_mask = 0;
if (state->Vcc != 0)
pccr_set_mask |= PCCR_S0_PWAITEN|PCCR_S1_PWAITEN;
if (state->Vcc == 50)
pccr_set_mask |= PCCR_S0_PSE|PCCR_S1_PSE;
if (state->flags & SS_RESET)
pccr_set_mask |= PCCR_S0_RST|PCCR_S1_RST;
if (state->flags & SS_OUTPUT_ENA)
pccr_set_mask |= PCCR_S0_FLT|PCCR_S1_FLT;
local_irq_save(flags);
val = sa1111_readl(s->dev->mapbase + PCCR);
val &= ~pccr_skt_mask;
val |= pccr_set_mask & pccr_skt_mask;
sa1111_writel(val, s->dev->mapbase + PCCR);
local_irq_restore(flags);
return 0;
}
int sa1111_pcmcia_add(struct sa1111_dev *dev, struct pcmcia_low_level *ops,
int (*add)(struct soc_pcmcia_socket *))
{
struct sa1111_pcmcia_socket *s;
int i, ret = 0;
ops->socket_state = sa1111_pcmcia_socket_state;
for (i = 0; i < ops->nr; i++) {
s = kzalloc(sizeof(*s), GFP_KERNEL);
if (!s)
return -ENOMEM;
s->soc.nr = ops->first + i;
soc_pcmcia_init_one(&s->soc, ops, &dev->dev);
s->dev = dev;
if (s->soc.nr) {
s->soc.socket.pci_irq = dev->irq[IDX_IRQ_S1_READY_NINT];
s->soc.stat[SOC_STAT_CD].irq = dev->irq[IDX_IRQ_S1_CD_VALID];
s->soc.stat[SOC_STAT_CD].name = "SA1111 CF card detect";
s->soc.stat[SOC_STAT_BVD1].irq = dev->irq[IDX_IRQ_S1_BVD1_STSCHG];
s->soc.stat[SOC_STAT_BVD1].name = "SA1111 CF BVD1";
} else {
s->soc.socket.pci_irq = dev->irq[IDX_IRQ_S0_READY_NINT];
s->soc.stat[SOC_STAT_CD].irq = dev->irq[IDX_IRQ_S0_CD_VALID];
s->soc.stat[SOC_STAT_CD].name = "SA1111 PCMCIA card detect";
s->soc.stat[SOC_STAT_BVD1].irq = dev->irq[IDX_IRQ_S0_BVD1_STSCHG];
s->soc.stat[SOC_STAT_BVD1].name = "SA1111 PCMCIA BVD1";
}
ret = add(&s->soc);
if (ret == 0) {
s->next = dev_get_drvdata(&dev->dev);
dev_set_drvdata(&dev->dev, s);
} else
kfree(s);
}
return ret;
}
static int pcmcia_probe(struct sa1111_dev *dev)
{
void __iomem *base;
int ret;
ret = sa1111_enable_device(dev);
if (ret)
return ret;
dev_set_drvdata(&dev->dev, NULL);
if (!request_mem_region(dev->res.start, 512, SA1111_DRIVER_NAME(dev))) {
sa1111_disable_device(dev);
return -EBUSY;
}
base = dev->mapbase;
/*
* Initialise the suspend state.
*/
sa1111_writel(PCSSR_S0_SLEEP | PCSSR_S1_SLEEP, base + PCSSR);
sa1111_writel(PCCR_S0_FLT | PCCR_S1_FLT, base + PCCR);
#ifdef CONFIG_SA1100_BADGE4
pcmcia_badge4_init(&dev->dev);
#endif
#ifdef CONFIG_SA1100_JORNADA720
pcmcia_jornada720_init(&dev->dev);
#endif
#ifdef CONFIG_ARCH_LUBBOCK
pcmcia_lubbock_init(dev);
#endif
#ifdef CONFIG_ASSABET_NEPONSET
pcmcia_neponset_init(dev);
#endif
return 0;
}
static int __devexit pcmcia_remove(struct sa1111_dev *dev)
{
struct sa1111_pcmcia_socket *next, *s = dev_get_drvdata(&dev->dev);
dev_set_drvdata(&dev->dev, NULL);
for (; s; s = next) {
next = s->next;
soc_pcmcia_remove_one(&s->soc);
kfree(s);
}
release_mem_region(dev->res.start, 512);
sa1111_disable_device(dev);
return 0;
}
static struct sa1111_driver pcmcia_driver = {
.drv = {
.name = "sa1111-pcmcia",
},
.devid = SA1111_DEVID_PCMCIA,
.probe = pcmcia_probe,
.remove = __devexit_p(pcmcia_remove),
};
static int __init sa1111_drv_pcmcia_init(void)
{
return sa1111_driver_register(&pcmcia_driver);
}
static void __exit sa1111_drv_pcmcia_exit(void)
{
sa1111_driver_unregister(&pcmcia_driver);
}
fs_initcall(sa1111_drv_pcmcia_init);
module_exit(sa1111_drv_pcmcia_exit);
MODULE_DESCRIPTION("SA1111 PCMCIA card socket driver");
MODULE_LICENSE("GPL");