kernel-fxtec-pro1x/arch/mips/include/asm/hpet.h
Huacai Chen e292ccde21 MIPS: Loongson-3: Add RS780/SBX00 HPET support
CPUFreq driver need external timer, so add hpet at first.

In Loongson 3, only Core-0 can receive external interrupt. As a result,
timekeeping cannot absolutely use HPET timer. We use a hybrid solution:
Core-0 use HPET as its clock event device, but other cores still use
MIPS; clock source is global and doesn't need interrupt, so use HPET.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Hongliang Tao <taohl@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/8329/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24 07:45:02 +01:00

73 lines
1.9 KiB
C

#ifndef _ASM_HPET_H
#define _ASM_HPET_H
#ifdef CONFIG_RS780_HPET
#define HPET_MMAP_SIZE 1024
#define HPET_ID 0x000
#define HPET_PERIOD 0x004
#define HPET_CFG 0x010
#define HPET_STATUS 0x020
#define HPET_COUNTER 0x0f0
#define HPET_Tn_CFG(n) (0x100 + 0x20 * n)
#define HPET_Tn_CMP(n) (0x108 + 0x20 * n)
#define HPET_Tn_ROUTE(n) (0x110 + 0x20 * n)
#define HPET_T0_IRS 0x001
#define HPET_T1_IRS 0x002
#define HPET_T3_IRS 0x004
#define HPET_T0_CFG 0x100
#define HPET_T0_CMP 0x108
#define HPET_T0_ROUTE 0x110
#define HPET_T1_CFG 0x120
#define HPET_T1_CMP 0x128
#define HPET_T1_ROUTE 0x130
#define HPET_T2_CFG 0x140
#define HPET_T2_CMP 0x148
#define HPET_T2_ROUTE 0x150
#define HPET_ID_REV 0x000000ff
#define HPET_ID_NUMBER 0x00001f00
#define HPET_ID_64BIT 0x00002000
#define HPET_ID_LEGSUP 0x00008000
#define HPET_ID_VENDOR 0xffff0000
#define HPET_ID_NUMBER_SHIFT 8
#define HPET_ID_VENDOR_SHIFT 16
#define HPET_CFG_ENABLE 0x001
#define HPET_CFG_LEGACY 0x002
#define HPET_LEGACY_8254 2
#define HPET_LEGACY_RTC 8
#define HPET_TN_LEVEL 0x0002
#define HPET_TN_ENABLE 0x0004
#define HPET_TN_PERIODIC 0x0008
#define HPET_TN_PERIODIC_CAP 0x0010
#define HPET_TN_64BIT_CAP 0x0020
#define HPET_TN_SETVAL 0x0040
#define HPET_TN_32BIT 0x0100
#define HPET_TN_ROUTE 0x3e00
#define HPET_TN_FSB 0x4000
#define HPET_TN_FSB_CAP 0x8000
#define HPET_TN_ROUTE_SHIFT 9
/* Max HPET Period is 10^8 femto sec as in HPET spec */
#define HPET_MAX_PERIOD 100000000UL
/*
* Min HPET period is 10^5 femto sec just for safety. If it is less than this,
* then 32 bit HPET counter wrapsaround in less than 0.5 sec.
*/
#define HPET_MIN_PERIOD 100000UL
#define HPET_ADDR 0x20000
#define HPET_MMIO_ADDR 0x90000e0000020000
#define HPET_FREQ 14318780
#define HPET_COMPARE_VAL ((HPET_FREQ + HZ / 2) / HZ)
#define HPET_T0_IRQ 0
extern void __init setup_hpet_timer(void);
#endif /* CONFIG_RS780_HPET */
#endif /* _ASM_HPET_H */