kernel-fxtec-pro1x/drivers/block/cciss.h
Stephen M. Cameron 617e134422 cciss: Dynamically allocate struct device for each logical drive as needed.
Dynamically allocate struct device for each logical drive as needed
instead of allocating the maximum we would ever need at driver init time.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01 21:15:41 +02:00

301 lines
7.2 KiB
C

#ifndef CCISS_H
#define CCISS_H
#include <linux/genhd.h>
#include <linux/mutex.h>
#include "cciss_cmd.h"
#define NWD_SHIFT 4
#define MAX_PART (1 << NWD_SHIFT)
#define IO_OK 0
#define IO_ERROR 1
#define IO_NEEDS_RETRY 3
#define VENDOR_LEN 8
#define MODEL_LEN 16
#define REV_LEN 4
struct ctlr_info;
typedef struct ctlr_info ctlr_info_t;
struct access_method {
void (*submit_command)(ctlr_info_t *h, CommandList_struct *c);
void (*set_intr_mask)(ctlr_info_t *h, unsigned long val);
unsigned long (*fifo_full)(ctlr_info_t *h);
unsigned long (*intr_pending)(ctlr_info_t *h);
unsigned long (*command_completed)(ctlr_info_t *h);
};
typedef struct _drive_info_struct
{
__u32 LunID;
int usage_count;
struct request_queue *queue;
sector_t nr_blocks;
int block_size;
int heads;
int sectors;
int cylinders;
int raid_level; /* set to -1 to indicate that
* the drive is not in use/configured
*/
int busy_configuring; /* This is set when a drive is being removed
* to prevent it from being opened or it's
* queue from being started.
*/
struct device *dev;
__u8 serial_no[16]; /* from inquiry page 0x83,
* not necc. null terminated.
*/
char vendor[VENDOR_LEN + 1]; /* SCSI vendor string */
char model[MODEL_LEN + 1]; /* SCSI model string */
char rev[REV_LEN + 1]; /* SCSI revision string */
} drive_info_struct;
struct ctlr_info
{
int ctlr;
char devname[8];
char *product_name;
char firm_ver[4]; // Firmware version
struct pci_dev *pdev;
__u32 board_id;
void __iomem *vaddr;
unsigned long paddr;
int nr_cmds; /* Number of commands allowed on this controller */
CfgTable_struct __iomem *cfgtable;
int interrupts_enabled;
int major;
int max_commands;
int commands_outstanding;
int max_outstanding; /* Debug */
int num_luns;
int highest_lun;
int usage_count; /* number of opens all all minor devices */
# define DOORBELL_INT 0
# define PERF_MODE_INT 1
# define SIMPLE_MODE_INT 2
# define MEMQ_MODE_INT 3
unsigned int intr[4];
unsigned int msix_vector;
unsigned int msi_vector;
int cciss_max_sectors;
BYTE cciss_read;
BYTE cciss_write;
BYTE cciss_read_capacity;
// information about each logical volume
drive_info_struct drv[CISS_MAX_LUN];
struct access_method access;
/* queue and queue Info */
struct hlist_head reqQ;
struct hlist_head cmpQ;
unsigned int Qdepth;
unsigned int maxQsinceinit;
unsigned int maxSG;
spinlock_t lock;
//* pointers to command and error info pool */
CommandList_struct *cmd_pool;
dma_addr_t cmd_pool_dhandle;
ErrorInfo_struct *errinfo_pool;
dma_addr_t errinfo_pool_dhandle;
unsigned long *cmd_pool_bits;
int nr_allocs;
int nr_frees;
int busy_configuring;
int busy_initializing;
int busy_scanning;
struct mutex busy_shutting_down;
/* This element holds the zero based queue number of the last
* queue to be started. It is used for fairness.
*/
int next_to_run;
// Disk structures we need to pass back
struct gendisk *gendisk[CISS_MAX_LUN];
#ifdef CONFIG_CISS_SCSI_TAPE
void *scsi_ctlr; /* ptr to structure containing scsi related stuff */
/* list of block side commands the scsi error handling sucked up */
/* and saved for later processing */
#endif
unsigned char alive;
struct list_head scan_list;
struct completion scan_wait;
struct device dev;
};
/* Defining the diffent access_menthods */
/*
* Memory mapped FIFO interface (SMART 53xx cards)
*/
#define SA5_DOORBELL 0x20
#define SA5_REQUEST_PORT_OFFSET 0x40
#define SA5_REPLY_INTR_MASK_OFFSET 0x34
#define SA5_REPLY_PORT_OFFSET 0x44
#define SA5_INTR_STATUS 0x30
#define SA5_SCRATCHPAD_OFFSET 0xB0
#define SA5_CTCFG_OFFSET 0xB4
#define SA5_CTMEM_OFFSET 0xB8
#define SA5_INTR_OFF 0x08
#define SA5B_INTR_OFF 0x04
#define SA5_INTR_PENDING 0x08
#define SA5B_INTR_PENDING 0x04
#define FIFO_EMPTY 0xffffffff
#define CCISS_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */
#define CISS_ERROR_BIT 0x02
#define CCISS_INTR_ON 1
#define CCISS_INTR_OFF 0
/*
Send the command to the hardware
*/
static void SA5_submit_command( ctlr_info_t *h, CommandList_struct *c)
{
#ifdef CCISS_DEBUG
printk("Sending %x - down to controller\n", c->busaddr );
#endif /* CCISS_DEBUG */
writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
h->commands_outstanding++;
if ( h->commands_outstanding > h->max_outstanding)
h->max_outstanding = h->commands_outstanding;
}
/*
* This card is the opposite of the other cards.
* 0 turns interrupts on...
* 0x08 turns them off...
*/
static void SA5_intr_mask(ctlr_info_t *h, unsigned long val)
{
if (val)
{ /* Turn interrupts on */
h->interrupts_enabled = 1;
writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
} else /* Turn them off */
{
h->interrupts_enabled = 0;
writel( SA5_INTR_OFF,
h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
}
}
/*
* This card is the opposite of the other cards.
* 0 turns interrupts on...
* 0x04 turns them off...
*/
static void SA5B_intr_mask(ctlr_info_t *h, unsigned long val)
{
if (val)
{ /* Turn interrupts on */
h->interrupts_enabled = 1;
writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
} else /* Turn them off */
{
h->interrupts_enabled = 0;
writel( SA5B_INTR_OFF,
h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
}
}
/*
* Returns true if fifo is full.
*
*/
static unsigned long SA5_fifo_full(ctlr_info_t *h)
{
if( h->commands_outstanding >= h->max_commands)
return(1);
else
return(0);
}
/*
* returns value read from hardware.
* returns FIFO_EMPTY if there is nothing to read
*/
static unsigned long SA5_completed(ctlr_info_t *h)
{
unsigned long register_value
= readl(h->vaddr + SA5_REPLY_PORT_OFFSET);
if(register_value != FIFO_EMPTY)
{
h->commands_outstanding--;
#ifdef CCISS_DEBUG
printk("cciss: Read %lx back from board\n", register_value);
#endif /* CCISS_DEBUG */
}
#ifdef CCISS_DEBUG
else
{
printk("cciss: FIFO Empty read\n");
}
#endif
return ( register_value);
}
/*
* Returns true if an interrupt is pending..
*/
static unsigned long SA5_intr_pending(ctlr_info_t *h)
{
unsigned long register_value =
readl(h->vaddr + SA5_INTR_STATUS);
#ifdef CCISS_DEBUG
printk("cciss: intr_pending %lx\n", register_value);
#endif /* CCISS_DEBUG */
if( register_value & SA5_INTR_PENDING)
return 1;
return 0 ;
}
/*
* Returns true if an interrupt is pending..
*/
static unsigned long SA5B_intr_pending(ctlr_info_t *h)
{
unsigned long register_value =
readl(h->vaddr + SA5_INTR_STATUS);
#ifdef CCISS_DEBUG
printk("cciss: intr_pending %lx\n", register_value);
#endif /* CCISS_DEBUG */
if( register_value & SA5B_INTR_PENDING)
return 1;
return 0 ;
}
static struct access_method SA5_access = {
SA5_submit_command,
SA5_intr_mask,
SA5_fifo_full,
SA5_intr_pending,
SA5_completed,
};
static struct access_method SA5B_access = {
SA5_submit_command,
SA5B_intr_mask,
SA5_fifo_full,
SA5B_intr_pending,
SA5_completed,
};
struct board_type {
__u32 board_id;
char *product_name;
struct access_method *access;
int nr_cmds; /* Max cmds this kind of ctlr can handle. */
};
#define CCISS_LOCK(i) (&hba[i]->lock)
#endif /* CCISS_H */