kernel-fxtec-pro1x/arch/powerpc/kernel/Makefile
Ananth N Mavinakayanahalli 8b7b80b9eb powerpc: Uprobes port to powerpc
This is the port of uprobes to powerpc. Usage is similar to x86.

[root@xxxx ~]# ./bin/perf probe -x /lib64/libc.so.6 malloc
Added new event:
  probe_libc:malloc    (on 0xb4860)

You can now use it in all perf tools, such as:

	perf record -e probe_libc:malloc -aR sleep 1

[root@xxxx ~]# ./bin/perf record -e probe_libc:malloc -aR sleep 20
[ perf record: Woken up 22 times to write data ]
[ perf record: Captured and wrote 5.843 MB perf.data (~255302 samples) ]
[root@xxxx ~]# ./bin/perf report --stdio
...

    69.05%           tar  libc-2.12.so   [.] malloc
    28.57%            rm  libc-2.12.so   [.] malloc
     1.32%  avahi-daemon  libc-2.12.so   [.] malloc
     0.58%          bash  libc-2.12.so   [.] malloc
     0.28%          sshd  libc-2.12.so   [.] malloc
     0.08%    irqbalance  libc-2.12.so   [.] malloc
     0.05%         bzip2  libc-2.12.so   [.] malloc
     0.04%         sleep  libc-2.12.so   [.] malloc
     0.03%    multipathd  libc-2.12.so   [.] malloc
     0.01%      sendmail  libc-2.12.so   [.] malloc
     0.01%     automount  libc-2.12.so   [.] malloc

The trap_nr addition patch is a prereq.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05 15:35:19 +10:00

167 lines
5.3 KiB
Makefile

#
# Makefile for the linux kernel.
#
CFLAGS_ptrace.o += -DUTS_MACHINE='"$(UTS_MACHINE)"'
subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
ifeq ($(CONFIG_PPC64),y)
CFLAGS_prom_init.o += -mno-minimal-toc
endif
ifeq ($(CONFIG_PPC32),y)
CFLAGS_prom_init.o += -fPIC
CFLAGS_btext.o += -fPIC
endif
ifdef CONFIG_FUNCTION_TRACER
# Do not trace early boot code
CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog
CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog
CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog
CFLAGS_REMOVE_prom.o = -pg -mno-sched-epilog
# do not trace tracer code
CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog
# timers used by tracing
CFLAGS_REMOVE_time.o = -pg -mno-sched-epilog
endif
obj-y := cputable.o ptrace.o syscalls.o \
irq.o align.o signal_32.o pmc.o vdso.o \
process.o systbl.o idle.o \
signal.o sysfs.o cacheinfo.o time.o \
prom.o traps.o setup-common.o \
udbg.o misc.o io.o dma.o \
misc_$(CONFIG_WORD_SIZE).o vdso32/
obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \
signal_64.o ptrace32.o \
paca.o nvram_64.o firmware.o
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power7.o
obj64-$(CONFIG_RELOCATABLE) += reloc_64.o
obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o idle_book3e.o
obj-$(CONFIG_PPC_A2) += cpu_setup_a2.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o
obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
obj-$(CONFIG_PPC_P7_NAP) += idle_power7.o
obj-$(CONFIG_PPC_OF) += of_platform.o prom_parse.o
obj-$(CONFIG_PPC_CLOCK) += clock.o
procfs-y := proc_powerpc.o
obj-$(CONFIG_PROC_FS) += $(procfs-y)
rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI) := rtas_pci.o
obj-$(CONFIG_PPC_RTAS) += rtas.o rtas-rtc.o $(rtaspci-y-y)
obj-$(CONFIG_PPC_RTAS_DAEMON) += rtasd.o
obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o
obj-$(CONFIG_RTAS_PROC) += rtas-proc.o
obj-$(CONFIG_LPARCFG) += lparcfg.o
obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_IBMEBUS) += ibmebus.o
obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_FA_DUMP) += fadump.o
ifeq ($(CONFIG_PPC32),y)
obj-$(CONFIG_E500) += idle_e500.o
endif
obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
obj-$(CONFIG_TAU) += tau_6xx.o
obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o
ifeq ($(CONFIG_FSL_BOOKE),y)
obj-$(CONFIG_HIBERNATION) += swsusp_booke.o
else
obj-$(CONFIG_HIBERNATION) += swsusp_$(CONFIG_WORD_SIZE).o
endif
obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o
obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_44x) += cpu_setup_44x.o
obj-$(CONFIG_PPC_FSL_BOOK3E) += cpu_setup_fsl_booke.o dbell.o
obj-$(CONFIG_PPC_BOOK3E_64) += dbell.o
obj-$(CONFIG_JUMP_LABEL) += jump_label.o
extra-y := head_$(CONFIG_WORD_SIZE).o
extra-$(CONFIG_40x) := head_40x.o
extra-$(CONFIG_44x) := head_44x.o
extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o
extra-$(CONFIG_8xx) := head_8xx.o
extra-y += vmlinux.lds
obj-$(CONFIG_RELOCATABLE_PPC32) += reloc_32.o
obj-$(CONFIG_PPC32) += entry_32.o setup_32.o
obj-$(CONFIG_PPC64) += dma-iommu.o iommu.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE) += prom_init.o
obj-$(CONFIG_MODULES) += ppc_ksyms.o
obj-$(CONFIG_BOOTX_TEXT) += btext.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_UPROBES) += uprobes.o
obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o
obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
pci-common.o pci_of_scan.o
obj-$(CONFIG_PCI_MSI) += msi.o
obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \
machine_kexec_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_AUDIT) += audit.o
obj64-$(CONFIG_AUDIT) += compat_audit.o
obj-$(CONFIG_PPC_IO_WORKAROUNDS) += io-workarounds.o
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o
obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
obj-y += iomap.o
endif
obj-$(CONFIG_PPC64) += $(obj64-y)
obj-$(CONFIG_PPC32) += $(obj32-y)
ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),)
obj-y += ppc_save_regs.o
endif
obj-$(CONFIG_EPAPR_PARAVIRT) += epapr_paravirt.o epapr_hcalls.o
obj-$(CONFIG_KVM_GUEST) += kvm.o kvm_emul.o
# Disable GCOV in odd or sensitive code
GCOV_PROFILE_prom_init.o := n
GCOV_PROFILE_ftrace.o := n
GCOV_PROFILE_machine_kexec_64.o := n
GCOV_PROFILE_machine_kexec_32.o := n
GCOV_PROFILE_kprobes.o := n
extra-$(CONFIG_PPC_FPU) += fpu.o
extra-$(CONFIG_ALTIVEC) += vector.o
extra-$(CONFIG_PPC64) += entry_64.o
extra-y += systbl_chk.i
$(obj)/systbl.o: systbl_chk
quiet_cmd_systbl_chk = CALL $<
cmd_systbl_chk = $(CONFIG_SHELL) $< $(obj)/systbl_chk.i
PHONY += systbl_chk
systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
$(call cmd,systbl_chk)
ifeq ($(CONFIG_PPC_OF_BOOT_TRAMPOLINE),y)
$(obj)/built-in.o: prom_init_check
quiet_cmd_prom_init_check = CALL $<
cmd_prom_init_check = $(CONFIG_SHELL) $< "$(NM)" "$(obj)/prom_init.o"
PHONY += prom_init_check
prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o
$(call cmd,prom_init_check)
endif
clean-files := vmlinux.lds