kernel-fxtec-pro1x/drivers/mtd/maps/l440gx.c
Adrian Bunk 59018b6d2a MTD/JFFS2: remove CVS keywords
Once upon a time, the MTD repository was using CVS.

This patch therefore removes all usages of the no longer updated CVS
keywords from the MTD code.

This also includes code that printed them to the user.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-04 17:50:17 +01:00

162 lines
3.7 KiB
C

/*
* BIOS Flash chip on Intel 440GX board.
*
* Bugs this currently does not work under linuxBIOS.
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#define PIIXE_IOBASE_RESOURCE 11
#define WINDOW_ADDR 0xfff00000
#define WINDOW_SIZE 0x00100000
#define BUSWIDTH 1
static u32 iobase;
#define IOBASE iobase
#define TRIBUF_PORT (IOBASE+0x37)
#define VPP_PORT (IOBASE+0x28)
static struct mtd_info *mymtd;
/* Is this really the vpp port? */
static void l440gx_set_vpp(struct map_info *map, int vpp)
{
unsigned long l;
l = inl(VPP_PORT);
if (vpp) {
l |= 1;
} else {
l &= ~1;
}
outl(l, VPP_PORT);
}
static struct map_info l440gx_map = {
.name = "L440GX BIOS",
.size = WINDOW_SIZE,
.bankwidth = BUSWIDTH,
.phys = WINDOW_ADDR,
#if 0
/* FIXME verify that this is the
* appripriate code for vpp enable/disable
*/
.set_vpp = l440gx_set_vpp
#endif
};
static int __init init_l440gx(void)
{
struct pci_dev *dev, *pm_dev;
struct resource *pm_iobase;
__u16 word;
dev = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82371AB_0, NULL);
pm_dev = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82371AB_3, NULL);
pci_dev_put(dev);
if (!dev || !pm_dev) {
printk(KERN_NOTICE "L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue\n");
pci_dev_put(pm_dev);
return -ENODEV;
}
l440gx_map.virt = ioremap_nocache(WINDOW_ADDR, WINDOW_SIZE);
if (!l440gx_map.virt) {
printk(KERN_WARNING "Failed to ioremap L440GX flash region\n");
pci_dev_put(pm_dev);
return -ENOMEM;
}
simple_map_init(&l440gx_map);
printk(KERN_NOTICE "window_addr = 0x%08lx\n", (unsigned long)l440gx_map.virt);
/* Setup the pm iobase resource
* This code should move into some kind of generic bridge
* driver but for the moment I'm content with getting the
* allocation correct.
*/
pm_iobase = &pm_dev->resource[PIIXE_IOBASE_RESOURCE];
if (!(pm_iobase->flags & IORESOURCE_IO)) {
pm_iobase->name = "pm iobase";
pm_iobase->start = 0;
pm_iobase->end = 63;
pm_iobase->flags = IORESOURCE_IO;
/* Put the current value in the resource */
pci_read_config_dword(pm_dev, 0x40, &iobase);
iobase &= ~1;
pm_iobase->start += iobase & ~1;
pm_iobase->end += iobase & ~1;
pci_dev_put(pm_dev);
/* Allocate the resource region */
if (pci_assign_resource(pm_dev, PIIXE_IOBASE_RESOURCE) != 0) {
pci_dev_put(dev);
pci_dev_put(pm_dev);
printk(KERN_WARNING "Could not allocate pm iobase resource\n");
iounmap(l440gx_map.virt);
return -ENXIO;
}
}
/* Set the iobase */
iobase = pm_iobase->start;
pci_write_config_dword(pm_dev, 0x40, iobase | 1);
/* Set XBCS# */
pci_read_config_word(dev, 0x4e, &word);
word |= 0x4;
pci_write_config_word(dev, 0x4e, word);
/* Supply write voltage to the chip */
l440gx_set_vpp(&l440gx_map, 1);
/* Enable the gate on the WE line */
outb(inb(TRIBUF_PORT) & ~1, TRIBUF_PORT);
printk(KERN_NOTICE "Enabled WE line to L440GX BIOS flash chip.\n");
mymtd = do_map_probe("jedec_probe", &l440gx_map);
if (!mymtd) {
printk(KERN_NOTICE "JEDEC probe on BIOS chip failed. Using ROM\n");
mymtd = do_map_probe("map_rom", &l440gx_map);
}
if (mymtd) {
mymtd->owner = THIS_MODULE;
add_mtd_device(mymtd);
return 0;
}
iounmap(l440gx_map.virt);
return -ENXIO;
}
static void __exit cleanup_l440gx(void)
{
del_mtd_device(mymtd);
map_destroy(mymtd);
iounmap(l440gx_map.virt);
}
module_init(init_l440gx);
module_exit(cleanup_l440gx);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
MODULE_DESCRIPTION("MTD map driver for BIOS chips on Intel L440GX motherboards");