kernel-fxtec-pro1x/drivers/media/video/s5p-g2d/g2d-hw.c
Kamil Debski a16fa71d6b [media] s5p-g2d: remove two unused variables from the G2D driver
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-11 12:02:47 -02:00

104 lines
1.9 KiB
C

/*
* Samsung S5P G2D - 2D Graphics Accelerator Driver
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* Kamil Debski, <k.debski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the
* License, or (at your option) any later version
*/
#include <linux/io.h>
#include "g2d.h"
#include "g2d-regs.h"
#define w(x, a) writel((x), d->regs + (a))
#define r(a) readl(d->regs + (a))
/* g2d_reset clears all g2d registers */
void g2d_reset(struct g2d_dev *d)
{
w(1, SOFT_RESET_REG);
}
void g2d_set_src_size(struct g2d_dev *d, struct g2d_frame *f)
{
u32 n;
w(f->stride & 0xFFFF, SRC_STRIDE_REG);
n = f->o_height & 0xFFF;
n <<= 16;
n |= f->o_width & 0xFFF;
w(n, SRC_LEFT_TOP_REG);
n = f->bottom & 0xFFF;
n <<= 16;
n |= f->right & 0xFFF;
w(n, SRC_RIGHT_BOTTOM_REG);
w(f->fmt->hw, SRC_COLOR_MODE_REG);
}
void g2d_set_src_addr(struct g2d_dev *d, dma_addr_t a)
{
w(a, SRC_BASE_ADDR_REG);
}
void g2d_set_dst_size(struct g2d_dev *d, struct g2d_frame *f)
{
u32 n;
w(f->stride & 0xFFFF, DST_STRIDE_REG);
n = f->o_height & 0xFFF;
n <<= 16;
n |= f->o_width & 0xFFF;
w(n, DST_LEFT_TOP_REG);
n = f->bottom & 0xFFF;
n <<= 16;
n |= f->right & 0xFFF;
w(n, DST_RIGHT_BOTTOM_REG);
w(f->fmt->hw, DST_COLOR_MODE_REG);
}
void g2d_set_dst_addr(struct g2d_dev *d, dma_addr_t a)
{
w(a, DST_BASE_ADDR_REG);
}
void g2d_set_rop4(struct g2d_dev *d, u32 r)
{
w(r, ROP4_REG);
}
u32 g2d_cmd_stretch(u32 e)
{
e &= 1;
return e << 4;
}
void g2d_set_cmd(struct g2d_dev *d, u32 c)
{
w(c, BITBLT_COMMAND_REG);
}
void g2d_start(struct g2d_dev *d)
{
/* Clear cache */
w(0x7, CACHECTL_REG);
/* Enable interrupt */
w(1, INTEN_REG);
/* Start G2D engine */
w(1, BITBLT_START_REG);
}
void g2d_clear_int(struct g2d_dev *d)
{
w(1, INTC_PEND_REG);
}